Related
Why is it that the Holux driver does not appear in the Tomtom list of available drivers. Can't seem to install anything from the CD driver supplied with the GPS receiver. Does anyone have any ideas?
Thank you in advance.
I got this from the tomtom website and posted it here a few weeks ago.
If you are thinking of buying TOMTOM 3 please read this from the TOMTOM website.
Compatibility
- Not compatible with Holux GPS Receiver
- Not compatible with Integral Compact Flash Cards
- Not compatible with CF Type II cards (Microdrives)
- Not compatible with TomTom II Maps
I got mine working with tomtom 2 by downloading bluetooth tools patch but havent tried it with tomtom 3.
I decided to give it a try. if you have the gps already bonded make sure you delete the bonding first. Download and install the latest bluetooth tools from here
http://bluetooth.i-networx.de/index_e.html
Set bluetooth to discoverable mode, choose "new", it will find the gps, enter code, mine is 6268, when you ok it, bluetooth tools should pop up, I chose serial/com4. Once complete, make sure bluetooth mode is "on".
Go to tomtom, choose "gps", go to the lower box where you should now see your holux gps listed, choose this then tick the large box on the left. You should now have a working tomtom3 system despite what it says on the tomtom website about it not working. :shock:
cruisin-thru said:
Once complete, make sure bluetooth mode is "on".
Go to tomtom, choose "gps", go to the lower box where you should now see your holux gps listed, choose this then tick the large box on the left. You should now have a working tomtom3 system despite what it says on the tomtom website about it not working. :shock:
Click to expand...
Click to collapse
howdy.
ive got myself a holux gr230 which of course isnt listed as a supported device, but once bonded its visible in the lower box, but it wont connect. what should i select in the upper box?
im also having probs with tomtom activation. it says its activated, but when i try to go into uk maps it just says that "this activation code is not valid for Great_Britain" but the majour roads of europe version seems to work fine. ne ideas?
Cheers.
Smiley
I am using the DCONNEX DC-230 BT GPS, which is in fact a rebadged Holux GR-230.
Flawlessly.
I use Rom 1,72 with native BT stack.
Just bond the GPS, say YES to questions on assigning a COM port
In TomTom select NMEA Bluetooth and COM5
Only issue is that TomTom alsmost hangs the MDAII when it cant find the GPS (ie. GPS off, BT off, GPS out of reach).
Still looking for a solution for that . . .
I have the same problem that TOMTOM hangs. This is very annonying as sometimes I would like to check the Map in TomTOm without having my Holux Mouse with me. I then have to use TomTom Wizard to uncheck the little box in gps setting and then change to simulator :?
Before I was using BluetoothTools and TomTOm worked also fine without a GPS Mouse for a Map, but Bluetooth Tools introduced a considerable lag (looking for bluetooth headset) of the XDA when taking a call, this was also very annoying as I use the XDA2 primarily as a phone, and the phone has to work perfect ....
Greetz
WELL I'M USING 1.60 ROM ON MY XDA 2, BT TOOLS, AND I BONDED ON COM 4...BUT ALL TOMTOM 3 SHOWS IN LOWER BOX IS:
COM 2,9bt ON COM 6, AND bt GPS.....
NOTHING OF THEM WORK...
PLEASE HELP ME...
@RDKAY:
Great to hear I am not the only one suffering from the TomTom hanging without GPS connected.
BTW: What ROM are you using?
I put bluetooth in discoverable mode, it finds the holux gps, it asks "do you want this device as a serial device" answer yes. Switch bluetooth to on, in tomtom, the top box reads tomtom wireless gps, the bottom box reads com 5, it works perfectly.
Im sure you all have latest opdate from tt..or? had the same problem activating major roads, opdate solved this problem..why use wizard changing gps? uncheck recieve all incoming beams in connections, go to programs/tomtom gps change gps to any serial gps..(not uncheking gives an error message: can not open com 1: port does not exits. rom 1.66.00).
Jensen
@edsub
I am using the Imate 1.72 Rom on my T-mobile mda2... don't think it is a rom issue although...
Im sure you all have latest opdate from tt..or?
Click to expand...
Click to collapse
I think it might be true that updating TT would do things better but:
I have bought TT with maps for Germany, Austria and Switzerland. And I just needed a Spain Map also which you cannot buy individually (TT just told me to buy also the Westeuropean package... :evil: ) so I got the Spain Map from Emule. :twisted:
Now when I do the TT update the Spain map doesn't work anymore, so I cannot do the update....
.why use wizard changing gps?
Click to expand...
Click to collapse
Because with opening directly TT Gps its hanging my mda2 completly, I have desactived incoming beams although :roll:
But anyway phone and TomTom work fine more or less, so "never change a running system" :wink:
Cheers
Rainer
Its looking more and more towards a rom issue.
People without the issue all have iMate roms
I have Qtek rom
What is your Rom build?
Mine
Version 1.72.00WWE
Date 03/15/04
Radio 1.14.00
Protocol 1337.24
ExtRom 1.72.901 (my own)
G'day,
I am trying to install TomTom v5.21 onto the rw6828 without much luck.
Tried to copy cab files and get instal unsucessful when running.
Tried to install from PC and get an error that setup.exe encountered an error and the application closed.
Any help appreciated
Cheers,
Matt
on Atom I did it. I use cracked version 5.2.1 and maps for eastern europe.
http://4pda.ru/forum/uploads/img-10857-tt_navigator_ppc_521.rar
(with russian voices)
if you need install instruction - I will translate
Have progressed
Ok..I managed to install the application but I am unable to install the maps now.
I am not sure if I need to start again, as I installed the app first then ran the wizard, it came up with no maps found, I then copied the map and config file to the storage card , when I click on the cab it thinks for a while then reports install unsuccessful.
Any help appreciated
write the correct path in config file (thats locate in "My documents")
I am sure, that the name of your storage card is different with current config.
Problem with GPS Reciver on Atom XDA with Tomtom
Hello, i've installed Tomtom 5.21 and the maps and everything is ok. but i can't make the link between my gps reciver (Royaltek Star III) and the atom XDA. I've installed the partnership in the settings but it doesn't connect with the antenna. I've seen in my other pda (ipaq hx4700 and ipaq hx2790) that there is a bluetooth manager in the connection setting but there is non in the atom xda. Do you know what's the solution ?
Thanks
kropotov, what is the procedure to install your version of tomtom ?? and how do you change the path in currentmap.dat ??? THX in advance
solal
actualy I use cracked version 5.21 from www.4pda.ru
to run the program, you must
1. copy several files to Mydocument (include config file)
2. copy map to card
3. copy application to program files.
When you run application, it look to config in my documents.
So in different devices, you have different names of storage card (Storage, Memory card, SD card, CF card e.t.c.) you must edit config (storage name) to correct path to map files.
OK i am going to try I'll let you know thx
cookie,
i also own an rw6828. i purchased an HP iPAQ bluetooth receiver for it and am having the same issue as dragsterbox. that is i cannot seem to pair the receiver to the rw6828 (which is the same as the O2 Atom). what i would like to know from you is what gps receiver you are using and how you successfully paired the two. no-one has been able to diagnose, even on other forums.
i had no problems installing my version of tomtom on the phone though. i simply copied all installation files to the sd card and tapped the .cab files to install. program (v5) seems to work fine. it is just that the phone and gps receiver dont pair (which is dragsters issue). i am in australia also.
regards,
danield11
Daniel,
Never got Tom Tom working, but got Destinator happening.
Follow this link to have the GPS recognised
http://www.mtekk.com.au/Forums/tabid/56/forumid/29/postid/58463/view/topic/Default.aspx
This worked and solved by issues. I am using a HP IPAQ GPS
Map of India
Hi every Buddy
Tell me is there any software which can Guide to Travel in India
THANKING IN ADVVVVVV
Hey everyone,
I have finally got my gear (HP iPAQ rw6828 & HP iPAQ Bluetooth GPS Receiver) talking to each other using TomTom Navigator 5 on Windows Mobile 5!
I thought I would post what worked for me in case I could possibly assist any others out there with the same issue. From what I have seen there have been a couple. If I have helped, I would love to hear from you!
If you have had many attempts at this, I would recommend you clear all previous bluetooth pairings, installations and GPS settings then do a soft reset at the minimum. A hard reset is preferable (be sure to backup all contacts, etc to a computer before doing so!).
1. Install TomTom on your device. DO NOT pair the bluetooth receiver yet!
2. Go to Start, Settings, System, GPS.
3. Set GPS program port to COM0.
4. Set GPS hardware port to COM7. Tap OK to exit. DO NOT pair the bluetooth receiver yet!
5. Go to Start, TomTom Navigator.
6. Configure TomTom and your connection as Other Bluetooth Receiver and select COM0 (the GPS program port) as it should be available now (it was never previously available to me in all my other efforts!).
7. Exit TomTom Navigator.
8. NOW pair the bluetooth receiver in Start, Settings, Connections, Bluetooth. Switch bluetooth on and then on the Devices tab select New Partnership. Once found select the bluetooth receiver and tap Next. Enter the required passcode and tap Next. Check the Serial Port box and tap Finish. BEFORE creating bluetooth COM ports go to the next step.
9. Tap OK to go back to Settings then System tab and GPS.
10. Set GPS program port to None. If you do not do this, you will not be able to set the incoming port as COM0 in your Bluetooth settings. We will come back and change it again later. Tap OK to exit.
11. Go back to the Connections tab and click Bluetooth.
12. On the COM Ports tab select New Outgoing Port. Select your GPS receiver and tap next. Select COM7 (the GPS hardware port) and tap Finish.
13. Now select New Incoming Port and select COM0. If you cannot do this, it is most likely you skipped step 10. Tap Finish to exit.
14. Tap OK to go back to Settings then System tab and GPS.
15. Set GPS program port back to COM0. Tap OK to exit then close the settings window.
16. Startup TomTom Navigator and... VOILA! You should be seeing your current location in a matter of seconds!
The truly bizarre thing about my 3 weeks of attempting to get this to work was that I had actually performed all the above steps but possibly in different order (well all apart from the changing around of the GPS program ports in that particular way!). I could never get COM0 as a port in TomTom. So I highly recommend following these instructions to a T if you are having serious trouble like I was. I managed to put all the information I had gathered from various forums, HP support and colleagues at HP (yes I work for HP!!!) together and come up with a RELATIVELY simple way of doing it! In the age of Plug n Play, this seems like a very laborious way to do things. Couldn't someone make an easier way???
Many thanks to all that had responded in my desparation. You all have in one way or another assisted in getting this to work for me. My faith in the PDA world has been restored!
I think my next purchase will definitely need to have an inbuilt receiver :wink:
Happy Trails Everyone!
It drives me crazy !
Hello,
I also own a rw6828. When I installed Tomtom 5 on my pocket pc from the ttn.cab file, the install works. I can launch the product, but it says I need an activation code. When I then replace the exe by the c---k one (which works for a colleague, but not having a rw6828), then it fails... Would you have any idea plse ? Which c---k should I be using ? Where can I find one ?
Thks for your help as this issue is driving me crazy and I am nearly regretting having bought that device !!!
Thanks !
Re: It drives me crazy !
sibertoul said:
Hello,
I also own a rw6828. When I installed Tomtom 5 on my pocket pc from the ttn.cab file, the install works. I can launch the product, but it says I need an activation code. When I then replace the exe by the c---k one (which works for a colleague, but not having a rw6828), then it fails... Would you have any idea plse ? Which c---k should I be using ? Where can I find one ?
Thks for your help as this issue is driving me crazy and I am nearly regretting having bought that device !!!
Thanks !
Click to expand...
Click to collapse
Version 5.21 does not need activation in wm5 devices
Here is a very simple tutorial:
connect device via A/sync
run TomTom installer from desktop install via Benelux and tick "install the application".
By default it will install to main memory(whether you select SD or not)
copy your map to SD card putting raw map files into a folder called "TomTom".
If you have other maps you can create another folder called "TomTom1" and drop raw map files into there.
Pair your device with Bt GPS receiver, serial port should come up under partnership settings, make sure box is ticked.
Tap com ports tab and select New Outgoing Port, select com7
There is no need for an incoming Port!
Run TomTom and goto "Change Preferences" goto "Show GPS Status" selet BT receiver and select com7..... Done!
Great thanks
homer285,
Thanks a lot for your support. I have been having issues for 10 days and thanks to you, it is solved now !
Thanks !
What I did
Hello,
Just a quick note to describe what I did. For a reason I don't know, I never managed to install Tomtom 5.00 from the DVD, idem for 5.10 or 5.21. Therefore, I installed TTN from the sd card using a ttn.cab file. I directly install the 5.21 version with its patch. I did pair my BT GPS receiver and finally launch TTN 5.21 and had the pleasure to see it working. I was happy because I started regretting having bought this device.
My error was that I thought that I needed to patch the 5.00 version, then secondly install the 5.10, and finally install the 5.21 version.
Hope this helps and thx for your support.
Cheers
(HP iPAD rw6828, mini SD 1 Gb, Globalsat bt338, TTN 5.21)
there is already TTN 6 for WM5 and WM2003 exist
I need to backup my data and systems before even thinking about a new TT version :lol:
This is the reason why I asked in another post if there was a tool to do that, and I am under the impression that I need to add another softwarez to do so, ie there is no already installed tool on the ipaq rw6828, which, imho, is a shame !
backup? Why? TT6&maps can be installed in SD card
TT6
I installed TTN 5.21 on my device, and maps on my storage card. It's true that I could have installed on the storage card, but I was not asked the question...
Is TT6 already available ? What's the enhancements wrt TTN5 ? I may open another post...
Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?
Had no problems pairing my BT Slim GPS with my Vario II, TomTom runs fine.
What GPS receiver you using ?
works fine on my xda trion as well.......im using tom tom 5.21 with BT-338 gps receiver.......im also using com port 0......you basically have to pair it and then add outgoing port as com port 0.....and during the installation on tom tom make sure you choose com port 0......that worked for me anyways....hope that helps.
Bluetooth GPS HTC TYTN
Thanks guys have re-installed tomtom and now it comes up with com prt 0.Probably didn't install correctly first time .Now up and running .Fantastic!!!!
I could cry
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?
mobilecat said:
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?
Click to expand...
Click to collapse
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great
OUCH
dew.man said:
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great
Click to expand...
Click to collapse
I tried running this but i can still only assign certain points from my bluetooth manager and dont have these displayed on the tomtom menu.
When you go into the GPS Status settings on Tomtom and tap configure, have you tried looking to see which com ports it lists and then going back to the bluetooth settings and doing trial and error to allocate any of those port numbers as an outgoing port for your GPS unit?
For my genuine Tomtom GPS unit, I did not even have to set up a port, I just had to pair the device but when I used a friends alternative brand of GPS unit for a short while, I was only able to get that one working under Com port 4. I can't quite remember but it may even have been a case that Com 4 only became visible in the Tomtom GPS configure menu after I had allocated it as an outgoing port for the GPS device (sorry, it is a while back so I can't quite remember the order in which I set it up)
Hope you get it sorted
arghh
I a so annoyed. I did this and had no luck. Later on I did something and got the option for port 2 and used it and it was great. I had to do a soft reset for something else and I cant do it again. tried everything.
MMMM
Happy yet frustrated
I have deleted create ports from my device as it only works once. I have reset my device. I reinstalled createports and extracted the file. I then saw port 2 straight away - the one that had been missing in tomtom.
The only problem is that if I do a soft reset I have to do that again!
It is very frustrating trying to get some of these things working. Have you thought about upgrading to Tomtom 6? you may find you have less problems getting the pairing and ports working right.
Failing that, I am sure you will be able to get it working again, just keep trying all the com ports one by one until you find one that appears in the Tomtom configuration. Like I said, on my XDA Vario II (Hermes) I managed to get it working on Com 4 and when I had an XDA Mini S (Wizard) I seem to remember that it was either Com 6 or Com 7 which worked on that one.
You might want to check the bluetooth settings for security and beam as well. Try turning security off (ie. passkey required off) and make sure the beam setting is ticked to receive all incoming beams.
I will keep my fingers crossed for you
download co-pilot for uk
Dashley said:
Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?
Click to expand...
Click to collapse
Any one got the co-pilot softwear to insallate for MDA VARIO 2.
download co-pilot softwear for UK.
Any one got the co-pilot softwear to insallate for MDA VARIO 2.
another thread
I have just seen another thread about XDA with a patch for this that seems to work. Can someone merge the threads?
Createports
Can anyone point me in the right direction to find this program. I think that it is hidden on the web somewhere near the holy grail.
Help with TT6 + TYTN + Royaltek 2110 please
I have a TYTN and a GPS Royaltek 2110. I have position com0 and other programs GPS work correctly. The problem is that the TT6 always shows he himself message “GPS nonfound”, although always I can say to him that this in the COM0 but does not find satellite.
That I can do? I put the TT5
somebody it has the CreatePorts program and it can put it?
Thanks
try this thread:-
http://forum.xda-developers.com/showthread.php?t=288865
Pairing TOMTOM 6 with Bluetooth GPS
For all of you that are having problems pairing your GPS Bluetooth receiver with your Hermes see the instruction set below:
#Hermes can not be in flight Mode#
1st: Run BTHTools1100.exe
--------------------------------------------------------------------------------------------------
2nd:
Pair them in Bluetooth Manager
Set:
Holux (outgoing port com4)
Incoming Port (com8)
no security
------------------------------------------------
3rd:
In settings >> Connections >> GPS
Programs set GPS program port to Com 8
Hardware set GPS hardware port to Com 4
baud rate 4800
If GPS program is not seen in settings\Connections
Use resco registry or other program and:
Go to Hkey_local_Machine\ControlPanel\GPS settings\ creat (make new) "Group" with Dword data =2
---------------------------------------------------------------------------------------------------
In TomTom chose:
Bluetooth GPS
Com4
should be working Now
Pairing TOMTOM 6 with Bluetooth GPS (easy) - Kaiser
First after reading the posts I thought I had to reinstall Tom Tom or install another software. Luckily, I paused and read the message when I was about to configure my other bluetooth receiver. It said, first you must establish your bluetooth connection. Well, I lied coz I did try to go on and couldnt find COM 0 or whatever you guys have said.
But that's what I did, eventually. Paired the device as BT GPS, check the serial connection (not sure if secure connection needs to be checked but I left it unchecked to find out later). After that go to com port tab, and click add new port ie selected COM0.
Then go back to TT6 (restarted in my case), and to other bluetooth gps receiver then found COM 0 in there. Voila!!
Chose COM0, but still got no gps device message. Waited for about 2 mins while reading further into the posts and now my TT6 is working.
You could call that strike of luck I dont really care but yeah.. saving some batt power on my kaiser for the bank holiday;s trip. Have a great one everyone!!
P/s: Mine is O2 stellar on Dutty's great work.
Com 4 is the only one that works with Schaps 3.54
I have WM 6.1 and now my Tom Tom isn't working.
My TyTn II has Tom Tom Navigator. It was working but isn't at present since I transferred everything to a new memory card. One of the forums said I should set it up to use NMEA GPS receiver...how do I go about doing it?
Thanks!
gps
on your phone goto settings system external GPS choose a port (com 4 is mine ) on program tab then goto hardwear tab and choose hardware port ( mine is 7) baud rate move to 9600 then goto access tab and make sure there is a tick in the box manage gps automatically press ok
now start tomtom up goto change prefrances 3rd screen you will see show gps status press that then configure choose other nmea gps receiver press select slide gps baud rate to 9600 select done next screen is the 2 com ports you chose in step 1 on your phone choose the top port for gps is connected to and it should now all work
good luck
DREA
lairdturner said:
I have WM 6.1 and now my Tom Tom isn't working.
My TyTn II has Tom Tom Navigator. It was working but isn't at present since I transferred everything to a new memory card. One of the forums said I should set it up to use NMEA GPS receiver...how do I go about doing it?
Thanks!
Click to expand...
Click to collapse
i had a similar problem when i changed my ROM from the windows mobile official 6.1 to a cooked ROM ( currently using Yardie 2.1) i was able to connect to tom tom with no problems in some areas it would take about 5 or 6 minutes to connect other times it would be much quicker, but after i installed my new ROM my tom tom sometimes connected and sometimes it didin't and when it did it would take up to 20 minutes. so i did some searching and found GPSGate 2.6 and now my tom tom always connects with in a minute, only a couple occasions it took a little longer ( i was in the mountains of NH,USA) i dont have the thread but if you do a google search for GPSgate you should find it. hope this helps.
Sorry to hijack this thread but I would like to know if it is possible to use the GPS receiver with the Tytn II with the TOMTOM 6 software or is the only option to use an external gps reciever?
hi there.
i don't know why, but i cant set "choose hardware port ( mine is 7)"
after every attempt to change settings the port is set to none.
what could be the reason?
iso|ated said:
hi there.
i don't know why, but i cant set "choose hardware port ( mine is 7)"
after every attempt to change settings the port is set to none.
what could be the reason?
Click to expand...
Click to collapse
i have the same problem
Hi,
I install GPS utilities and try to connect to GPS holux. When search, it can found GPS holux. But when I try to start. It always failed. It can't connect to GPS device.
Does anyone have a good experience about this?
I'm using Amadeus with WM 2003 SE and Holux M1000.
What GPS software do you use on your mobile device?
I have a Qtek 8010 with a Holux M1000, but I could not find any functioning GPS program...
connected to GPS!
I was able to connect to my GPS, now it's up and going .
Configuration:
Qtek 8010
WM 6.1 [1.5] http://forum.xda-developers.com/showthread.php?t=374893
Holux M1000
GPS software: PocketGPS-Map http://pocketgpsmap.sourceforge.net/
I have Efficasoft GPS Utilities installed on my smartphone. But I can't found GPS when I run this application
Should I upgrade my smartphone to WM 6?
I downloaded and tried Efficasoft GPS Utilities. Nice program, have you the key?
It functioned without problems on my typhoon device; where did you get problems/errors and what messages did you get?
I hope I can help you...
I don't have the key yet, I just want to try my GPS connection for test.
I choose Auto Search Bluetooth GPS Receiver. My holux was found. But when I try to connect (Start GPS), it always failed.
Error message:
Unable to connect GPS receiver. Please check the receiver connection setup and try Start GPS again.
What's wrong with my GPS
You could try to assign a COM port to your Holux, instead of using Auto Search Bluetooth.
1. turn the Holux on;
2. Assign a com port from Settings > Connections > Bluetooth
(here you should see your Holux, if you don't click on Add new device)
select Holux, click on Menu > COM Ports and assign a COM port (I have assigned COM6 for example)
3. Now start GPS Utilities
4. Click on Menu > GPS Setup
5. De-select Auto Search Bluetooth and select the correct COM port (COM6 for me)
6. Click on Menu > Done
7. Click on Menu > Start GPS
Does it work?
I think my smartphone menu is different.
start > settings >
I can't see Connections. It has Data Connection (for GPRS setting) and Bluetooth.
I try to select Bluetooth, select holux, but I can't found menu to assign COM port.
FYI, I'm using WM2003, not WM6.
My problem is I can't make/choose COM port for bluetooth.
I don't know how to help you.
I see two options:
1) try another gps software
2) try to upgrade your rom
I've upgraded from WM2003 to WM6.1 and I'm very satisfied -- thank you ALEUT!
upgrade guide here: http://karhoe.net/content/view/35/1/
It's ok. Thank you for your help