Hera110 how to unlock - Wing, P4350 General

hi
any body knows how to unlock HERA110 T-mobile.
IPL: 4.10.0002
SPL: 4.10.0000
Rom Ver :4.10.531.3WWE
Rom Dat :03-15-07
Radio Ver :02.83.90
Protocol V:4.1.13.37
Ext Rom :4.10.531.103
CPU: :OMAP850
bestregd

what do you mean by unlock?
do you want to CID unlock it? This will let you the custom roms. To do so, use either USPL or HardSPL your phone. Make sure you use the ones provided in the Herald Forum.
Do you want to sim unlock it? This will let you use sim cards of other service providers in your phone. To do this, call T-Mobile and ask them for more information

if u mean Unlock to use with another carriers (SIM Unlock)... sorry, this is not possible.. The only way is imei-check.co.uk
otherwise, if u mean Unlock to use with 3rd party applications, give your device a new fresh look and cool applications, just take a peek on Herald ROM Development and Herald Mobile 6

tramuyo said:
if u mean Unlock to use with another carriers (SIM Unlock)... sorry, this is not possible.. The only way is imei-check.co.uk
otherwise, if u mean Unlock to use with 3rd party applications, give your device a new fresh look and cool applications, just take a peek on Herald ROM Development and Herald Mobile 6
Click to expand...
Click to collapse
well he does have t mobile he go there i got the unlock code from them
only thing is that you must have an active account opened for 3+ months

need to cid my hera110 wing so i can flash new roms any help

Related

Cingular 8125 on T-Mobile

When i got the Cingular 8125, and before I did the ROM Upgrade to 2.17.7.2 WWE, I did the recommended CID Superunlock. As far as I could tell everything went great. Unlocking this phone, to me at least, meant that I would be able to use it on other non-Cingular GSM networks. A little bit ago a friend who is on t-Mobile needed to use my phone to make a phone call. He put his sim card in my phone and gave it a shot. When the phone started i was getting an error message about a network being locked. I do not remember the exzct wording.
Any ideas if this implies that the unlocking procedure i did di not work succesfully? or am I missunderstanding what the unlock procedure is meant to do? Is there another unlock procedure to make this phone usable with other providers other then Cingular?
Thank you
The CID unlock allows the installation of firmware with a different "brand" than your hardware was sold as. It has nothing to do with the GSM SIM. Use the latest version of lokiwiz to SIM-unlock your phone. Do a search for lokiwiz and read up on it.
use Lokwiz to SIM Unlock it. CID unlock allows you to flash other Roms.
kyphur said:
use Lokwiz to SIM Unlock it. CID unlock allows you to flash other Roms.
Click to expand...
Click to collapse
Yupe.... I did what 'Kyphur' mentioned to used my Tmobile card in my Cingular 8125. I bought Cingular because I like the 'Square' compare to the round design that vario have.

Is it possible to cid-unlock an MDA with IPL/SPL 2.26?

Hi,
I have a new MDA from T-Mobile which I updated to the 2.26 official t-mobile upgrade. I would to back up the device to a mini-sd card from the bootloader; however, am not able to cid-unlock the device (aWizard fails during the write step), and the bootloader is giving me a security level violation error.
Is there a (safe) way to CID-Unlock the device? If not, how else can I do a full backup and guaranteed restore from a mini SD card? I apologize if this has been answered before... I tried to read through the forum however, could not find anything definitive.
Thanks
cid unlocking t-mobile mda
Hi,
I'm from the Netherlands and have exact the same problem.
Can't cid unlock my t-mobile mda.
So if there is an solution i'm interested.
This is the only solution yet: http://www.imei-check.co.uk/m3000unlock.php
Read the following link:
http://forum.xda-developers.com/viewtopic.php?t=50768&postdays=0&postorder=asc&start=175
Lokiwiz Issues:
Winnie:
Thanks for your response. I tried Lokiwiz. With Lokiwiz 0.3a (LokiwizMsl.bat) and that provided the SIM unlock code. However, I could not figure out a way to CID unlock with the Lokiwiz 0.3a tool. Lokiwiz 0.2b fails to CID unlock the phone. Again, I apologize if I am missing the obvious, however, what am I doing wrong?
Thanks
You're not doing anything wrong. The latest lokiwiz does not include the CID unlock feature, and the last version that does will not unlock 2.25 and above. It may not work on earlier ones either, but I know I have 2.25 and it's not working.
Re: Lokiwiz Issues:
Opppsss....I guess the poster on the link I gave you meant to be SIM Unlock not CID Unlock. I appologize. I just re-read the link and realized that. I'm sorry.
I think the only solution is to CID unlock before you upgrade to ROM 2.26. I read from some other threads as well that this upgrade does not require you to redo the CID unlock. Could anyone confirm me on this?
Thanks
acerbix said:
Winnie:
Thanks for your response. I tried Lokiwiz. With Lokiwiz 0.3a (LokiwizMsl.bat) and that provided the SIM unlock code. However, I could not figure out a way to CID unlock with the Lokiwiz 0.3a tool. Lokiwiz 0.2b fails to CID unlock the phone. Again, I apologize if I am missing the obvious, however, what am I doing wrong?
Thanks
Click to expand...
Click to collapse
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Hi,
Thanks for your responses: Is there a way to downgrade to an official 1.08 ROM, and then CID unlock the device, and then bump back up to a 2.26 ROM?
Thanks
i was thinkin of doin that. when i bought my mda it came with the 1.8 rom, and i upgraded it to 2.26. now i be wantin to cid unlock it.
so i was thinkin of tryin to install the 1.8 rom and cid unlock it. but the question is will the 1.8 rom install properly after 2.26 is installed
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
kyphur said:
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Click to expand...
Click to collapse
ah well, that sounds like a massive pain in the ass... i dont have the patience for that anyways i already bought a card specifically to back up the rom in any case, and i dont doubt that the wizard community will come up with something. in the meantime, ive got no major hangups with 2.26, besides the occasional freeze
kyphur said:
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Click to expand...
Click to collapse
ah well, that sounds like a massive pain in the ass... i dont have the patience for that anyways i already bought a card specifically to back up the rom in any case, and i dont doubt that the wizard community will come up with something. in the meantime, ive got no major hangups with 2.26, besides the occasional freeze

how to know if my artemis is CID locked or not ?

I bought it in a computer center and separately choosed an operator (Bouyguestel) to work with.
I have no SIM from any other operator to check if i can access to the network. (or i have to ask a friend for it tomorow !)
Is it possible to know that by only entering my IMEI in a specialised website ?
I want to flash my P3300 with WM6 and the latest ROMs.
Chris06 said:
I bought it in a computer center and separately choosed an operator (Bouyguestel) to work with.
I have no SIM from any other operator to check if i can access to the network. (or i have to ask a friend for it tomorow !)
Is it possible to know that by only entering my IMEI in a specialised website ?
I want to flash my P3300 with WM6 and the latest ROMs.
Click to expand...
Click to collapse
CID and Network are totally different things. Your device might be SIM unlocked but CID locked and vice versa. If your device is SIM locked. You have to pay some money to unlock it. If it is SIM unlocked but CID locked, it does not matter. You can put any ROM on your device as long as it is alive.
my dopod M700 from China,it was reloaded by a english rom ,It is sim unclocked.how i know about CID,pls tell me specifically
kdragon said:
my dopod M700 from China,it was reloaded by a english rom ,It is sim unclocked.how i know about CID,pls tell me specifically
Click to expand...
Click to collapse
As far as I know a device is ALWAYS CID Locked until you unlock it! and with the Artemis, the only way to do this is to pay some money to www.imei-check.co.uk so as long as you did not pay them to unlock the device it is CID-LOCKED.
rvbcrs said:
As far as I know a device is ALWAYS CID Locked until you unlock it! and with the Artemis, the only way to do this is to pay some money to www.imei-check.co.uk so as long as you did not pay them to unlock the device it is CID-LOCKED.
Click to expand...
Click to collapse
Correct, listen to him if you like your phone.
Thanks all for your precisions.
So i just can update my OS Rom, but if i don't want to crash my artemis, i should unlock its CID before radio or other Rom update.
help
My 02xda after an upgrade for wm6 stop at 02 boot screen, what can i do now???
help me please.

wing uestion

do i need to unlock my wing to put a rom on there?
Most of the time, no
unless the rom you are trying to install is not made for the wing, then u might run into some problems but if u flash it using a nbh format, wich is how most roms are lately it bypasses the ID check
ok so the rom open touch version 2.2 for the wing it says erron 240 update utility out of date why is that?
computerkid23 said:
ok so the rom open touch version 2.2 for the wing it says erron 240 update utility out of date why is that?
Click to expand...
Click to collapse
It's a NBH format. You'll have to run the USPL along with it.
IS there a CID unlock free tool floating around here somewhere? I can't seem to dig anything up. Can do the free carier unlock through TMO, but what about CID unlocking? And perhaps the real question is: "Is there any point to CID unlocking a TMO Wing if you can flash the ROM via NBH-compatible ROM?"
many thnx
mgreig said:
IS there a CID unlock free tool floating around here somewhere? I can't seem to dig anything up. Can do the free carier unlock through TMO, but what about CID unlocking? And perhaps the real question is: "Is there any point to CID unlocking a TMO Wing if you can flash the ROM via NBH-compatible ROM?"
many thnx
Click to expand...
Click to collapse
HardSPL and USPL is the way to flash NBH files. What they do is that they bypass the CID check. Think of it as a poor man's CID unlock.
ivanmmj said:
HardSPL and USPL is the way to flash NBH files. What they do is that they bypass the CID check. Think of it as a poor man's CID unlock.
Click to expand...
Click to collapse
are you trying to say we're all broke asses in here? hahaha

help!!can we flash to unlock sim??

hi,
I brought a Tmobile HTC Leo on ebay in US but would like to unlock it so that i can use any sim card plzzz let me know how i can do it.. is buying unlock code the only option or can i also flash to unlock the code??
my software info on my mobile has
OS version 5.2.21889(21889.5.0.87)
Manila version 2.5.2012412.1
ROM version 2.10.531.1(82076)WWE
ROM date 02/22/10
I will really appreciate for any suggestions
thanx a ton guys
vivek4all
vivek4all said:
hi,
I brought a Tmobile HTC Leo on ebay in US but would like to unlock it so that i can use any sim card plzzz let me know how i can do it.. is buying unlock code the only option or can i also flash to unlock the code??
my software info on my mobile has
OS version 5.2.21889(21889.5.0.87)
Manila version 2.5.2012412.1
ROM version 2.10.531.1(82076)WWE
ROM date 02/22/10
I will really appreciate for any suggestions
thanx a ton guys
vivek4all
Click to expand...
Click to collapse
No you can not flash anything to SIM unlock your phone. The only way is to get the unlock code from T-mobile or one of the websites that offer it
There are no known flash unlock for TMOUS HTC HD2 except for using unlock codes. since yours was bought not from tmobile but from ebay I suggest that you have to unlock using unlocking websites like ebay, and others.

Categories

Resources