Sprint Touch Quick Launch Icons Needed - Touch CDMA General

Hi all, I was wondering if someone could please send me a copy of the Sprint Touch quick launch icon bmps. (The yellow and gray graphics and thier mask images) I believe they are found under /Windows/directory, and should be labled something like ql_.... There should be around ten of them. I really like some of the icon like the TV set and would like to modifiy my Verizon icon set. If you could please either post them or send me an email that would be wonderful. Thanks for the help!

Has anyone had a chance to look?
The Exact Names are:
ql_TV.bmp
ql_TV_mask.bmp
ql_search.bmp
ql_search_mask.bmp
ql_photos.bmp
ql_photos_mask.bmp
ql_music.bmp
ql_music_mask.bmp
ql_phone.bmp
ql_phone_mask.bmp
Thanks

here you go

I dumped all the images from the touch a while ago but i can't remember where i originally posted it so here...
http://www.xenthony.net/vogue/touchimages.zip

Related

TomTom Today icon on Black V2

Hi Everyone
Was wondering if anyone knows where I can find the TomTom today icon on my device. The current icon does not show up very well on the Black today screen. I want to edit the icon to a different colour
I looked and searched for tttoday.bmp but with out any luck
Very grateful if someone can point me in the right direction!
I too was wondering this.
I've found a couple of files in the /resources folder with a .mif extension, called 'Tomtom icon' and 'Tomtom Splash Screen' but assume these are non-editable.
Can anyone help? WM6 rocks, and everything is perfect except my Tomtom shortcut is almost blacked out!
neuromacer said:
Hi Everyone
Was wondering if anyone knows where I can find the TomTom today icon on my device. The current icon does not show up very well on the Black today screen. I want to edit the icon to a different colour
I looked and searched for tttoday.bmp but with out any luck
Very grateful if someone can point me in the right direction!
Click to expand...
Click to collapse
Here you go, the file you wanted!
Yeah I had the same problem. So I changed simply inverted the colours in the orginal file. I've attached the one I use.
Now I can see it!
C
by the way, it goes in My Device / TomTom (well it does on mine - I'm using TomTom 6)
thanks for file, but I already have this, I just need to know where to overwrite the file?? where does it go???
I know this is an old thread but just an updated tttoday image if anyones looking for it..custom made..
..place in My Device / TomTom ..(tomtom 6)

Sprint Touch Cube Configuration Tool 4.1

Ok, I think this one is gonna need a sticky. I got sick of having to type in all of the shortcuts in the registry editor to change the cube, so I wrote this little spiffy app. It allows you to customize the 2 sides of the cube with shortcuts. Just make sure you know what you are doing as far as what can go where. Enjoy!
Version 1.1 - I got tired of waiting for the file browser to refresh everytime. Now you only have to wait for the first time, after that it is cached.
Version 1.2 - Added IconPress to the 6-App Side, and IconPlaying, IconPlayingPress, and IconPress to the 3-App side.
Version 2.0 - Added param for 6-App Side and 3-App Side. Added links to animation files. Added GUI for app selection for 3-App side and 6-App side.
Version 2.1 - Squashed the bugs that were coming up. Sorry I didn't test it enough before releasing.
Version 3.0 - Now supports multiple 6-App sides (See Polen's Vista Cube)!! Added reset to defaults. Automatic shortcut selector or browse for apps. Fixed the bug where the Program Files directory wasn't showing up in the Browse tree.
Version 4.0 - Added support for the iCube , animation configuring for newly added sides, export settings to .reg file, and icon image preview*.
*The icon image preview must be set up correctly to work. It all depends on the naming convention used. Polen's icon packs work with the preview. Since the .brn files cannot be rendered, a .bmp file must be placed in the directory with the .brn having the same filename or following Polen's naming convention (ex. ie.bmp -> ie_top.brn, ie_top_press.brn).
I tried testing it with the stock cube, Polen's 6 sided cube, and the iCube, but may not have caught everything, so if you find a bug, let me know!
SORRY!!! I left out a file from the .cab, it's all fixed now! Enjoy!
Version 4.1 - Fixed a bug in the export settings and the Save button was getting disabled.
Download link: http://rapidshare.com/files/79573356/CubeConfig4.1.zip
If you guys have anymore suggestions, let me know.
Cheers!
thisguyinoc said:
Ok, I think this one is gonna need a sticky. I got sick of having to type in all of the shortcuts in the registry editor to change the cube, so I wrote this little spiffy app. It allows you to customize the 2 sides of the cube with shortcuts. Just make sure you know what you are doing as far as what can go where. Cheers!
http://rapidshare.com/files/73227261/CubeConfig.zip
Click to expand...
Click to collapse
Thanks for the App, works great.
difference between this and touch settings???
ok one question
when i make Icons. I save them as a BMP 24 bit, then i can just BMP to BRN and it will work?
also you just install CAB and go. Do you have to stop any processes before going. I guess i wont wait for Touch settings. This looks like it will work great???
just need to know if i need different icon sizes for the 3X2 and Media Hub????
thisguyinoc said:
Ok, I think this one is gonna need a sticky. I got sick of having to type in all of the shortcuts in the registry editor to change the cube, so I wrote this little spiffy app. It allows you to customize the 2 sides of the cube with shortcuts. Just make sure you know what you are doing as far as what can go where. Enjoy!
Click to expand...
Click to collapse
Without wanting to detract from what you have done, you may also want to look at 'Touch Settings' which has this functionality already. (now works on the Vogue) See:
http://forum.xda-developers.com/showthread.php?t=324556 (main thread)
http://forum.xda-developers.com/showthread.php?t=347892 (vogue support thread)
in your post though it said that you cant do Iocns yet on the sprint touch this one i believe if you just set the filepath you can!
also carlos kind of in response to my other thread in the vogue forum.
I was at my friends house playing w/ his sprint touch, downloaded some icons from my website, and put them on w/ this prog. I just saved files to the windows folder with BRN extension and it worked? Idk if it will w/ touch settings, but this one works for that purpose....
still not sure though if you need different size icons for mediahub..???
also still my question..... do you have to stop running the mediahub.exe or w/e the file is called before installilng this puppy?
ambush276 said:
in your post though it said that you cant do Icons yet on the sprint touch this one i believe if you just set the filepath you can!
Click to expand...
Click to collapse
As of yesterday's build Touch Settings can display / change Sprint (BRN) Icons. Simply tap the pictures to change.
great! ive heard so many great things about the touch settings program.. That i want to continue using it.
My question is are the pics still fuzzy when you use BMP to BRN. OR are they clear like sprint pre installed logo's.
my final question, and i know its been asked, can i use the 119 by the other dimension for both the 3X2 and Media Hub Screen?? What dimensions do i need? on the pics?
also i heard about Media hub not closing? is this true or is it fixed?
Would this work for the Bell Mobility version of the HTC Touch? (Canadian carrier, with a version of the Sprint vogue)
what i dont understand is th animation tab. I know how to make my own icons and stuff, my question is... like what is the animations brn?? What do i have to make for those. Do i need to change it?? I have all custom icons, does animations matter?
ambush276 said:
what i dont understand is th animation tab. I know how to make my own icons and stuff, my question is... like what is the animations brn?? What do i have to make for those. Do i need to change it?? I have all custom icons, does animations matter?
Click to expand...
Click to collapse
those are the images that are shown when changing from side to side. You don't have to change them, but you now have the option.
i c. So like if i make icon images... when i go to animations tab, i just say for image 1, run the path to my icon. Then i will be fine?? and it will turn w/ icon of choice... But there are only 6 icons???
thisguyinoc said:
If you guys have anymore suggestions, let me know.
Click to expand...
Click to collapse
What I'd really like to see is the ability to add QDail sides to the cube like you can with the Aplauncher. Has anyone got that working? I have more than 9 frequently called contacts and would love to have at least 2 sides of contacts - one for personal and one for business would be perfect.
But now that I've typed all this...I just realized that you didn't write the 6-sided cube app, right? I just integrates with yours....
I've been using the Touch Settings program from Carlos -- I'm anxious to see how this one works, too. Thanks to both of you for your hard work!
Haggar said:
What I'd really like to see is the ability to add QDail sides to the cube like you can with the Aplauncher. Has anyone got that working? I have more than 9 frequently called contacts and would love to have at least 2 sides of contacts - one for personal and one for business would be perfect.
But now that I've typed all this...I just realized that you didn't write the 6-sided cube app, right? I just integrates with yours....
I've been using the Touch Settings program from Carlos -- I'm anxious to see how this one works, too. Thanks to both of you for your hard work!
Click to expand...
Click to collapse
Yeah, I didn't write the 6-sided cube. I worked with Polen to make my app scale to the number of sides you have installed.
thisguyinoc said:
Yeah, I didn't write the 6-sided cube. I worked with Polen to make my app scale to the number of sides you have installed.
Click to expand...
Click to collapse
I played with your program yesterday (okay, let me be honest...I spent 20 hours in the past 24 hours making new cube graphics and drinking coffee until it was bleeding out my ears) and it's wonderful. In combination with the 6 sided cube it's a really great ap.
This may be from a total lack of sleep and the really nice caffiene buzz I've got going, but I'm a bit confused regarding the rotation anims and how to set them via the anim tab.
Is there a way to specify different transition graphics sets between sides 1&2, 2&3, and 3&4? It seems like the default is set to use C0-C5 for all rotations of the Launcher. Am I missing something? I was that the VistaCube program installed D0-D5 so manually created my own and added them to the Windows directory. My D series seems to be applied to those transitions eventhough the animations page shows C0-C5.
Is there a way to get to a drop down menu specifically for the extra sides or is this something that must be done manually? And in either case...how would I set it up to have separate anims for each of the different sides?
The main reason I ask is because I'm planning to use rather generic icons on my launcher pages so that I can swap out programs whenever I want without having to update the graphics on the cube. For example...I have an MP3 player icon that says "Music" on one page. I can assign that to Mort, or WMP, or anything else I want and not worry about the icon. That allows me to put the icons into the rotation graphics so it's a smooth transition and I don't see the "flash" when the app icons load on top of an otherwise different background.
Whew...long-ass question for something so simple. Any help would be appreciated!
Haggar said:
I played with your program yesterday (okay, let me be honest...I spent 20 hours in the past 24 hours making new cube graphics and drinking coffee until it was bleeding out my ears) and it's wonderful. In combination with the 6 sided cube it's a really great ap.
This may be from a total lack of sleep and the really nice caffiene buzz I've got going, but I'm a bit confused regarding the rotation anims and how to set them via the anim tab.
Is there a way to specify different transition graphics sets between sides 1&2, 2&3, and 3&4? It seems like the default is set to use C0-C5 for all rotations of the Launcher. Am I missing something? I was that the VistaCube program installed D0-D5 so manually created my own and added them to the Windows directory. My D series seems to be applied to those transitions eventhough the animations page shows C0-C5.
Is there a way to get to a drop down menu specifically for the extra sides or is this something that must be done manually? And in either case...how would I set it up to have separate anims for each of the different sides?
The main reason I ask is because I'm planning to use rather generic icons on my launcher pages so that I can swap out programs whenever I want without having to update the graphics on the cube. For example...I have an MP3 player icon that says "Music" on one page. I can assign that to Mort, or WMP, or anything else I want and not worry about the icon. That allows me to put the icons into the rotation graphics so it's a smooth transition and I don't see the "flash" when the app icons load on top of an otherwise different background.
Whew...long-ass question for something so simple. Any help would be appreciated!
Click to expand...
Click to collapse
That's a very logical request. Look for it in the next release.
thisguyinoc said:
That's a very logical request. Look for it in the next release.
Click to expand...
Click to collapse
Pithy. I like it.
Haggar said:
What I'd really like to see is the ability to add QDail sides to the cube like you can with the Aplauncher. Has anyone got that working? I have more than 9 frequently called contacts and would love to have at least 2 sides of contacts - one for personal and one for business would be perfect.
But now that I've typed all this...I just realized that you didn't write the 6-sided cube app, right? I just integrates with yours....
I've been using the Touch Settings program from Carlos -- I'm anxious to see how this one works, too. Thanks to both of you for your hard work!
Click to expand...
Click to collapse
Did you ever figure out a way to add another contact side to the cube?
I just installed the CubeConfig3.0.CAB
In the usual screen that says successfully installed and if you need more room... It is followed by a message I have not seen yet:
The program you have installed may not display properly because it was designed for a previous version of Windows Mobile software.
FYI
EDIT: I'm running the unmodified WM6 on a Bell CDMA Touch (Vogue - 128MB RAM/256 MB ROM)
Hmm I never got that one.... I'm running the exact same phone as you, MM.

Add icons to HTCHomePlugIn??......

I can hardly believe it, but after returning 4 different Verizon XV6800's, giving up and trying their "Glyde" and "Voyager".....I'm back once again to the Verizon XV6800. It's still the best device (IMO) despite it's weird glitches of turning on ActiveSync all by itself and still no flashing amber light to notify you of a missed MMS Guess I'll just have to live with those stupid oversights that Verizon and UTStarcomm are unwilling to fix.
Anyway, I digress. I have HTC Plus installed on my device and it works great! I also have the default HTCHomePlugin that came with the device enabled so it gives me the icons at the bottom of the screen for "Adjust Backlight", "ActiveSync" and "Flashlight".
I would like to add additional icons to the HTCHomePlugIn at the bottom of the screen WITHOUT making any other changes to my Today Screen ('cause I'm happy with the way it looks), but I have no idea how to add any other icons. Anyone able to help me with doing this?? Thanks.....Mark
PinzPilot said:
I can hardly believe it, but after returning 4 different Verizon XV6800's, giving up and trying their "Glyde" and "Voyager".....I'm back once again to the Verizon XV6800. It's still the best device (IMO) despite it's weird glitches of turning on ActiveSync all by itself and still no flashing amber light to notify you of a missed MMS Guess I'll just have to live with those stupid oversights that Verizon and UTStarcomm are unwilling to fix.
Anyway, I digress. I have HTC Plus installed on my device and it works great! I also have the default HTCHomePlugin that came with the device enabled so it gives me the icons at the bottom of the screen for "Adjust Backlight", "ActiveSync" and "Flashlight".
I would like to add additional icons to the HTCHomePlugIn at the bottom of the screen WITHOUT making any other changes to my Today Screen ('cause I'm happy with the way it looks), but I have no idea how to add any other icons. Anyone able to help me with doing this?? Thanks.....Mark
Click to expand...
Click to collapse
Go to the HTC Home folder on the root of your phone and copy the entire folder to your PC. Open the folder and browse around. Open what you want to edit in photoshop and edit/overwrite. Copy those changed files to a new folder and then transfer to the HTC Home folder to overwrite those files. NOTE: turn off HTC Home from the today screen when trying to overwrite files.
EDIT: Sorry realized this was the plugin, not HTC home.
See this thread:
http://forum.xda-developers.com/showthread.php?t=308250
The thread mentions that you can have only seven icons, but here's the 9 icon version:
popdog54 said:
See this thread:
http://forum.xda-developers.com/showthread.php?t=308250
The thread mentions that you can have only seven icons, but here's the 9 icon version:
Click to expand...
Click to collapse
Thank you very much. Exactly what I was looking for!!!!
Mark

Treo 800W's Today screen dialer?

Hello all,
Can someone extract the Treo 800W today screen dialer plugin? It appears that the Treo Pro will not have this nice plugin. This plugin resides on the Today screen and can be hidden using the hidelogo.cab.
I like how the plugin lets you dial directly from the Today screen. The WM6.1 dialer takes you AWAY from the Today screen to dial, which is inefficient.
If someone already have the extracted cab, can you please PM me? In the past, the plugin was made available here but Palm complained and it had to be removed. Thanks so much!
I share your pain!
hi,
I'm with you - I hate the standard WM dialer. I've just upgraded to a Treo Pro from a 750 and I am not enjoying the experience. If you got anywhere with your request could you share it with me?
Thanks,
John
Nope, so far no luck. No one has been willing to share or help.
Is this what you are looking for?
Thanks for the file. I don't think it's the right one. What I am looking for is Treo's on screen dialer. When you start typing a name or number, it automatically begin to display the matching contact right ON the Today's screen. Although WM6 have this same feature, it takes you to a new window for the search. It find this extra screen inefficient.
Take a look at the image at this post. It's the second item on the screen. The one that says "Type a name or number"
http://discussion.treocentral.com/showpost.php?p=1465113&postcount=4
I think it's called "Dial look-up," but I think it is also part of "Active call" (the search box at least)
I just wish Palm's today screen plug-ins weren't so intertwined. I've tweaked them to off on my 700wx.
From my search in the forum, at some point, somebody did post this cab file. However it was removed because Palm supposedly complained to xda-dev. If it can be hosted offsite, that might work.

Changing bottom softkeys on a Touch Dual

Hi wife now has my touch dual and now wants the bottom icons changed ie the ones that state calendar and contacts and I was wondering if any knows how to do it.
I was happy with the way it was but typical wife wants a change
Please remember that I am a Noob and never done anything with the fone when I had it lol
Cheers in advance
Nigel
Use advanced config:
http://www.touchxperience.com/en/advanced-configuration-tool.html
Thx for the reply twolf had a look at that site an it looks like a nice program I will get it for myself as to my wifes fone I downloaded a program called "Softkeys Control Panel Applet" which sorted the wifes problem an she is now as happy as a mother hen

Categories

Resources