Related
Hello,
I believe many of you are (or have been) having similar problems - I wonder if there's a solution for this?
The problem I have is that when the device comes back from sleep (that is, when I open it after not using it for a while) the screen lights up immediately, but the device is extremely unresponsive. Trying to click the Start menu (or anything else on the screen for that matter) will appear to do nothing at first - then when the device finally comes to its senses (10-30 seconds later) my clicks are "played back" at lightning speed. From then on the device is usable, but this delay is infuriating.
I have ROM 1.13.53 WWE (from Sep-23) with radio 1.03.01. My notifications database is small (15 entries) and I'm not running a lot of apps (I have PocketPlus installed).
Is anyone else having this problem? Is there a solution?
TIA
Are you using any Themes? Try switching back to the standard wm5 theme. My m5000 gets very glacier-like as soon as I try any other theme.
Try this.
Thanks for the replies!
I'm using the default theme. As for this Uni-Turbo thing, what does it do? Just so I know before I install it?
it will speed u your processor, after istall u will find the changing botton on Start/Settings/System/Power/Processor it works but using more power.
Im using this, it works Great ... i think its free, but
It essentially places a control panel file in \Windows which 'replaces' the power control panel item. The replacement is from another device, which has a Turbo Mode. So this gives you the ability to activate the turbo mode on your Universal. I've tried it - its safe to use and removing it returns things back to normal.
Try it and see if anything improves. I can guarantee though, that you'll see far more improvement by hard resetting (use Sprite Backup's free beta to backup emails, contacts, messages, etc).
martona said:
The problem I have is that when the device comes back from sleep (that is, when I open it after not using it for a while) the screen lights up immediately, but the device is extremely unresponsive. Trying to click the Start menu (or anything else on the screen for that matter) will appear to do nothing at first - then when the device finally comes to its senses (10-30 seconds later) my clicks are "played back" at lightning speed. From then on the device is usable, but this delay is infuriating.
I have ROM 1.13.53 WWE (from Sep-23) with radio 1.03.01. My notifications database is small (15 entries) and I'm not running a lot of apps (I have PocketPlus installed).
Is anyone else having this problem? Is there a solution?
TIA
Click to expand...
Click to collapse
If you have some Today plugins installed on your device it might slow down the response after turning it on.
For example:
I've got the Resco Explorer installed with it's Today plugin, and my device comes back with the plugin displayed in 15 seconds after opening it.
But when I turn off displaying Resco Today plugin it comes back immediately, after opening... (0,5 secs)
HoPe
My Uni works very well, but then I use it for next to nothing, but I keep memory clean with VJOkButt and stay away from memory resident stuff.
Although not exactly for this question, installing the extended rom dialler had a dramatic impact on speed on mine. If you don't need the pretty buttons, I highly recommend the stock MS Dialler.
V
Start button slowdown on first use
On the issue where the start button doesn't seem to do anything for a while after a suspend or soft reset:
The reason is that an application is listed in the Start Menu which resides on the SD card. What happens is that the Start menu tries to load the icon of the application from the SD card, which first has to wake up, causing the slowdown.
Same thing happens when you're browsing through the Programs folders (Start -> Programs), and there is a pause while loading the application shortcuts.
It's quite annoying, and I think it may be related to one or other registry hack.
Use SmallMenu!
V
vijay555 said:
Although not exactly for this question, installing the extended rom dialler had a dramatic impact on speed on mine. If you don't need the pretty buttons, I highly recommend the stock MS Dialler.
Click to expand...
Click to collapse
is there any way to uninstall the extended rom dialer? it's neither listed in the list of installed programs (in SKTools) nor in \Windows\AppMgr :/
thanks, fuf.
Start button slowdown on first use
On the issue where the start button doesn't seem to do anything for a while after a suspend or soft reset:
The reason is that an application is listed in the Start Menu which resides on the SD card. What happens is that the Start menu tries to load the icon of the application from the SD card, which first has to wake up, causing the slowdown.
Same thing happens when you're browsing through the Programs folders (Start -> Programs), and there is a pause while loading the application shortcuts.
It's quite annoying, and I think it may be related to one or other registry hack.
BeyondTheTech has an interesting article somewhere on Skype with this issue.
I just use SmallMenu, the normal StartMenu is useless to me.
Uninstalling the extended rom - i don't think so. You can probably manually delete the files it installs, but it'd be incredibly tedious and perhaps inaccurate/unstable. Best is to hard reset and setup again, but that's also tedious.
V
Re: Start button slowdown on first use
snorbaard said:
On the issue where the start button doesn't seem to do anything for a while after a suspend or soft reset:
The reason is that an application is listed in the Start Menu which resides on the SD card. What happens is that the Start menu tries to load the icon of the application from the SD card, which first has to wake up, causing the slowdown.
Same thing happens when you're browsing through the Programs folders (Start -> Programs), and there is a pause while loading the application shortcuts.
It's quite annoying, and I think it may be related to one or other registry hack.
Click to expand...
Click to collapse
So how come then I have the same thing when browsing anything for the first time after the soft reset even when I have NOTHING installed on the SD card? :wink:
martona said:
Hello,
I believe many of you are (or have been) having similar problems - I wonder if there's a solution for this?
The problem I have is that when the device comes back from sleep (that is, when I open it after not using it for a while) the screen lights up immediately, but the device is extremely unresponsive. Trying to click the Start menu (or anything else on the screen for that matter) will appear to do nothing at first - then when the device finally comes to its senses (10-30 seconds later) my clicks are "played back" at lightning speed. From then on the device is usable, but this delay is infuriating.
I have ROM 1.13.53 WWE (from Sep-23) with radio 1.03.01. My notifications database is small (15 entries) and I'm not running a lot of apps (I have PocketPlus installed).
Is anyone else having this problem? Is there a solution?
TIA
Click to expand...
Click to collapse
If you are using SPB Pocket Plus or any other similar software and allowing the SD card indicator on your today screen just remove it and you will realize the difference.
Also avoid to use any battery indicator on today screen as it will slow the device as well.
My last advice to you if you are using SPB Pocket plus is to un-install it and use any other similar program like Resco today plugins.... this will also speed up your device becuase the available version of SPB pocket plus is not completely compatible with WM5.
Regards,
I am using SPB PP (beta release) and its fast, but I didnt have a real problem with the earlier releases. I also use SPB diary and SPB Weather, and still no real problem, slightly sluggish but not intolerable.
My device wakes up perfectly immediately every time, and rings at the beginning of the second ring.
1. Remove SD card and battery monitors
2. Disable some of the additional SPB plug ins that you dont need like safe mode boot, PIE plug ins, battery monitor etc
3. Remove the antivirus software
4. Disable error reporting
5. Disable auto receive beams
6. Try disabling SPB altogether and see if it is still sluggish and unresponsive
7. Dont have anything on SPB or other that is immediately directed to the SD card as the SD card takes longer to recognise on wake up
8. Consider not switching the device off. I never turn it off, at all, wind down screen brightness, disable auto off, but auto off the screen only, close the clam shell switches off the screen but doesnt switch off the machine. the screen sucks the battery, not the processor.
Let me know if you have had any luck with this.
Perhaps you could also:
1. Ensure you have the latest rom from the website
2. Dont allow the extended rom to install (hard reset, and press reset when it says customising device), then use total commander to go to the extended rom and selectively install the items you need, this forum is full of information for this.
vijay555 said:
I just use SmallMenu, the normal StartMenu is useless to me.
V
Click to expand...
Click to collapse
I just tried it and I have to admit I already like smallmenu. One question please: How do I customize smallmenu?
It seems to me it is locked at the following list:
Today
Programs
Favorites
Commonly Used Programs
Settings
Suspend
SmallMenu
I reset my device before any of the crap from Ext.Rom could install. I now have a speeeeeedy device. Oh, i am using an i-mate Jasjar btw.
simon_darley said:
close the clam shell switches off the screen but doesnt switch off the machine. the screen sucks the battery, not the processor.
Click to expand...
Click to collapse
I disagree, try to power off the device every time you close the clam and power it on when you open it and you will see how much the battery life will improve. It really makes the difference, I just can't be bothered and am too lazy to do it :lol: I charge it every night anyway.
cheers there,,
it was only until yesterday that i had the courage to flash my BA to windows mobile 6...
To be honest ... you guys did a great job..
however, bugs have made their way into this one as well, so i will i will be asking you guys to post all your bugs in the following format:
ROM version:
bugs in :
PHONE:
WIFI:
PROGRAMS:
etc...
rom version: 5.2.1629
radio rom : 1.12
proplems:
phone:none
wifi: i can't use the wireless manager to turn on the wifi
prgrams:
1) x-button is not working , all programs are minimizing instead of closing, despite of the x-button being correctly configured
2) i cant get to type arabic letter with the keyboard, though allthe other arabic functions are working,
performance: the device is a bit sluggish
THINGS THAT ARE ANNOTING BUT DONOT REPRESENT A BUG:
1) button lock is not there,,, it is really annoying to find out that your BA is making a random phone call while in your pocket !!
2) I really liked the broadcom bluetooth stack , can i get it working here?
3) sim contacts appear in the phone book and there is no option to disable this , it would be really nice if i could get rid of the duplicates
and again:
thank you guys big time, especially HELMI for the super work,,
waiting for everybody to share their bugs
you can use comm manager, you just have to turn it on tru wlan settings esp after every SR, but after that you can activate it using comm manager. just like wm5...
one thing i noticed is the lack of keyboard sttttuttttteeeerrrriinnnnggg... which is great news since i always use the keyboard via one-handed operation.
x button is working on my unit, which is easily noticed since i have wisbar.
one bug i noticed though is that whenever ur connected to the pc and its syncing with the BA, it will totally freeze the BA for the duration that the pc and BA are syncing, sometimes causing the BA to hang.
xykosomatik said:
you can use comm manager, you just have to turn it on tru wlan settings esp after every SR, but after that you can activate it using comm manager. just like wm5...
one thing i noticed is the lack of keyboard sttttuttttteeeerrrriinnnnggg... which is great news since i always use the keyboard via one-handed operation.
x button is working on my unit, which is easily noticed since i have wisbar.
one bug i noticed though is that whenever ur connected to the pc and its syncing with the BA, it will totally freeze the BA for the duration that the pc and BA are syncing, sometimes causing the BA to hang.
Click to expand...
Click to collapse
It would be nice to switch on Wireless withou having to click on several items though - especially when using spb backup and auto restart after backup and profiles in phonealarm.
- WLAN activation problem
- keyboard problem (repeating characters after releasing keyyyyyyyyyyyyyyyyyyy...)
- phone doesn't work sometimes ("R" and "G" are "NONE") after softreset --> another softreset *immediately* after "R NONE" and "G NONE" appear.
- no ActiveSync --> activate "USB to PC" in Settings, Connections.
life owner said:
rom version: 5.2.1629
radio rom : 1.12
proplems:
phone:none
wifi: i can't use the wireless manager to turn on the wifi
prgrams:
1) x-button is not working , all programs are minimizing instead of closing, despite of the x-button being correctly configured
2) i cant get to type arabic letter with the keyboard, though allthe other arabic functions are working,
performance: the device is a bit sluggish
THINGS THAT ARE ANNOTING BUT DONOT REPRESENT A BUG:
1) button lock is not there,,, it is really annoying to find out that your BA is making a random phone call while in your pocket !!
2) I really liked the broadcom bluetooth stack , can i get it working here?
3) sim contacts appear in the phone book and there is no option to disable this , it would be really nice if i could get rid of the duplicates
and again:
thank you guys big time, especially HELMI for the super work,,
waiting for everybody to share their bugs
Click to expand...
Click to collapse
*install x-button 1.5.
*Use slide to unlock for all screen and button lock..
*Put broadcomm bt 1.7 by helmi.
*use pocket cm as contact application for nice graphics and no sim contact.
krishan2207 said:
*install x-button 1.5.
*Use slide to unlock for all screen and button lock..
*Put broadcomm bt 1.7 by helmi.
*use pocket cm as contact application for nice graphics and no sim contact.
Click to expand...
Click to collapse
With Broadcomm bt 1.7 by Helmi , what are the pros and cons, and does it sort out the wifi activation problem. I have read that there are some new problems with BT using this stack, can you confirm this?
well, sometimes the device stops working, doesn't respond to the power key, or softreset (display al black)it is needed to remove the battery.
P\ said:
It would be nice to switch on Wireless withou having to click on several items though - especially when using spb backup and auto restart after backup and profiles in phonealarm.
Click to expand...
Click to collapse
well, its just a few clicks ( 3 actually) more, a very minor extra minute not a big thing trivial speck compared to having a wm6-enabled BA
no problem
I see no problem in WM6 by Helmi. This is great! Thanks a lot. This is perfect.
- phone doesn't work sometimes ("R" and "G" are "NONE") after softreset --> another softreset *immediately* after "R NONE" and "G NONE" appear.
the ROM is actually super great, it is just that we want to make it greater
also, it would be actually very nice if there was some sort of a power-saving fix-
i use a 2400MAH battery but it is hardly doing 2 days in wm6, while it used to survive for 5 days on wm2003
life owner said:
- phone doesn't work sometimes ("R" and "G" are "NONE") after softreset --> another softreset *immediately* after "R NONE" and "G NONE" appear.
the ROM is actually super great, it is just that we want to make it greater
Click to expand...
Click to collapse
after soft reset or after removing the battery? this always happen to me since wm5 whenever i remove the battery... after seeing R and G values as zero, just SR again.
WM06 draining memory and battery
Hello,
I am experiecing memoray and battery drainage problem. I am having 60.3MB storage memory, 21.65MB free, 109.12MB Program memory & 73.3MB free yet I am getting errors that there is not enough storage or programs memory !!, does any one have a clue? and battery drain rate 10% per hour this is far more than WM05 when it was about 2% per hour. Any hints please.
__________________
Procedure to set button lock....
life owner said:
rom version: 5.2.1629
1) button lock is not there,,, it is really annoying to find out that your BA is making a random phone call while in your pocket !!
Click to expand...
Click to collapse
Use Keyboard Backlight option in settings->system to set button lock..
Procedure to hide sim contacts
life owner said:
sim contacts appear in the phone book and there is no option to disable this , it would be really nice if i could get rid of the duplicates
Click to expand...
Click to collapse
Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show
This will hide sim contacts from showing in contacts list.
Backlight on battery power keep on changing to 0 automatically. Don't know what is causing it, disabling PhoneAlarm to see if it help.
mightyox said:
Backlight on battery power keep on changing to 0 automatically. Don't know what is causing it, disabling PhoneAlarm to see if it help.
Click to expand...
Click to collapse
Found the problem, hold on the power button for a couple of seconds while turning it off.
i found a bug, when you arei n the sms and you press options and selected "mark all as read" option.. youll get the new connection thingie instead..... anyone has a fix?
Add contacts
Love the wm6 rom! Works great but ive noticed that i can not add a contact. I can add a contact to my sim but not to my BA. And my BA wont allow me to take the contact from my sim or my call history and add it to my device. Weird. But just thought id add that to the list. I LOVE WM6!
I know there are a few threads similar to this, but most of them quickly get off topic and are not all that useful. I was thinking about having everyone post what fixes and add ons for people have, and their overall experiences with each. Then we can have a single source to see which dialers work best, if any of the so called fixes actually work... all without searching 10 forums on 15 different sites.
Heres mine
Sprint Mogul
Pocket CM 0.15
jpl4 touch dialer
xda-developers power bar
the 8 button comm manager
spb mobile shell today add on
sms text sent notification disabled
I have noticed that my mogul is slower... especially when changing to landscape to use the keyboard, but i feel like this is pocket cm... please make additions... i think i am not the only one sick of looking through at least 5 different forums
I did away with PocketCM as it has some lag when opening. I switched over to iContacts and love it. Loads fast, does what I need which is to find contacts one handedly and when i hit OK or the top right X it closes it out completely. PocketCM stays open and running which can slow device down.
i meant to mention, right now i can't get redial to work properly with my dial pad... i have to go to call history and hit the hard dial button. Other dialers have worked, but i like the setup of this dial pad best... not sure if i'll change back to the mogul big button or not.
x button 2.0
todayAgenda (MT software)
tomtom navigator 6
total commander
lordsmiff battery level
all works
sms text sent notification disabled
How did you do this... I have been searching around and havent had much success
"sms text sent notification disabled"
every1isevil said:
How did you do this... I have been searching around and havent had much success "sms text sent notification disabled"
Click to expand...
Click to collapse
should be done with this regkey:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSDeliveryNotify"=dword:00000001
petervbeck said:
should be done with this regkey:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSDeliveryNotify"=dword:00000001
Click to expand...
Click to collapse
if you do that you will also disable your vibrate function. There is a cab file that will stop the notice.
Here's one:
http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=54
so i changed back over to the "mogul big button dialer" which i don't like the looks of as much, but it works perfectly.
Also 2 days ago I installed the task manager 2.0 I found over at the hermes forum... suddenly my battery doesn't need to be recharged!! More like I unplugged it yesterday morning and a full 25 hours later it said 80% charged this am... maybe just a fluke. Anyone else get better battery with this addon? (Task_Manager_2_0_30487_2.cab)
nursemm05 said:
if you do that you will also disable your vibrate function. There is a cab file that will stop the notice.
Here's one:
http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=54
Click to expand...
Click to collapse
Oops, sorry! I was referring to the wrong thing! If you disable the light, you disable your vibrate function! Sorry for th confusion!
I like the concept
I've been looking for a thread like this for a while. If I could make a suggestion, could you please list or attach the freeware files along with your posts. I'm having to do just as much searching to find out what a certain program does and download location as before.
I got rid of PocketCM... way too slow for me.
I'm running:
PIEPlus
10 button CommManager
WkTask
SPB Mobile Shell, Phone Suite, and Backup
Arcsoft MMS
dcd's touch dialer
Disabled SMS Sent Notification
Plus a bunch of other irrelevant stuff.
I notice lag sometimes when I go to send a text message and pop out the keyboard. Seems to have some lag going to landscape, and lag opening up the new text message window. Other than that it's fine for the most part.
I've used the following registry tweaks and gotten dramatically better battery life:
http://www.sprintusers.com/forum/showthread.php?t=127164&highlight=registry
A couple of us have tested this and found a nice increase in battery life. On my Treo 700 it seemed to do nothing but on the Q it greatly helped (I ran for 12 hours yesterday push email in a low signal environment and stayed at 4 bars battery--normally would have been at 2 or 3)
Quote:
"...simple registry trick and hack that will enable power management on several communications protocols to save and conserve the battery life, and thus extend and prolong the battery of the Windows Mobile devices."
Navigate to: HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0
Navigate to: HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0
Navigate to: HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0
Navigate to: HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms
Default value type and value are
“DisablePowerManagement”=dword:1
Change to
“DisablePowerManagement”=dword:0
(Again, use at your own risk -- I disclaim any liability -- except to say I've tried the above and it works well for me with no apparent downside).
On memory use, I found that people have tried removing the HTC_CM_Guardian and dddaemon from the \Windows\StartUp folder. I personally moved them to a "save" folder so I can restore them if I run into problems. One of them loads the voice dialer function and the other prevents certain changes to the system --- both appear to be memory hogs. I don't use voice dialer (I think even without this program the voice dialer will loan on demand anyway). Removing these two has improved my memory usage.
I use tMan as a task manager --- very handy and fast to close and manage running processes. Also very lightweight and easy to use.
Another REALLY useful tweak, the FlashVideoBundle along with the TCPMP player --- enables full screen YouTube videos launched from PIE. Is not compatible with the Flash plug in however, you can only have one or the other installed. See here for details:
http://discussion.treocentral.com/showpost.php?p=1319431&postcount=1
## TamerSpClock v1.4 ##
Last update 13 Dec 2008
"TamerSpClock" is a Windows Mobile 2003/5/6 software which lets you take hand over your time to the max. It is a fully customizable speaking clock & a chimer.
- you can choose a THEME of time intervals of 1 ,5 ,15 ,30 or 60 minutes ,Then you can choose actions to be done on these choosen theme intervals.
- you can adjust when to speak time or chime and when to mute in a way that differs from other programs by means that you can set multi portions (intervals) of time that mute the program automatically for daily use. you can access the file "Validity.ini" found in the folder named "settings" inside the program installation path. this file can be edited by any notepad or word (pocket or pc word) then you can specify at what hours to work on and what to mute (just Change validity = 0 corresponding to hours that needed to be muted & Change validity = 1 to the rest of the hours).
- The program can wake up the device without waking up your screen conserving your battery life and will chime even if the ppc is sleeping or in a deep sleep, The software have a feature that can force the screen not to wakeup (BlackMe feature) at chiming times or (if you choose to) to leave it to the current windows mobile configurations (settings) to decide ,this is useful for some ppc that wakeup the display on every chime which may have negative results on battery life.
- you can put your own wav files to be chimed ,just insert them in folder "Wav" found inside installation directory but use the same names of course.
- This software differs from other similar products in that if you choose for example 15 minute iterval for speaking the clock ,it wll activate itself and speak time on whole miute numbers like 15-30-45-60 and will not just repeat the choosen interval starting from the time you switched it on which results in speaking times like 4:52 and 7:27 etc.
- you can choose or omit salutations like "the time is" & "Am ,Pm" & saying "Oclock" at the whole number hours. this can be customized using the provided links to enable and disable the action features.
- you can choose whether to use vibration or no with the chiming process.
- you can stop all software processing events by one finger click.
- Software will automaticaly activate itself and work again after any restart of the device.
- you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%.
- you can set an action like Zekr which can help Muslims remember their Lord every 5 minutes with a low volume sound saying God is the most Great. This option acts solely without dependency of the choosen theme interval since it have a fixed firing every 5 minutes (take it or leave it).
# How to install Cab file of TamerSpClock:
1- For versions prior to v1.4 you must download MortScript from the following link
(Version v1.4 & above already have it embedded inside software)
http://www.sto-helit.de/index.php?mo...=view&entry=65
This software acts like an environment for "TamerSpClock" to work. please note that "TamerSpClock" cannot run without installing this software.
2- Transfer cab to any place on your ppc using active sync or any other communicating software.
3- Choose whether to install to Device or to MemoryCard ,It is very important to choose the installation target location during the setup process corresponding to the version you downloaded whether it is on memory card or on phone. Note that program is hard coded ,this is why this point is very important for the program to work.
4-For Version v1.4 & above before running program ,press the icon named "RunFirst" prior to run the program (This acts as if MortScript Cab is installed)
This software had been tested on HTC Tytn & found stable ,Also can work on any windows mobile device.
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
painter_ said:
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
Click to expand...
Click to collapse
Added 2 versions ,one if you want to setup on the Phone Main Memory & the other for Storage Card.
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
zard said:
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
Click to expand...
Click to collapse
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
kino-kino said:
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
Click to expand...
Click to collapse
Kino-Kino .. first of all open the start menu programs ,you will find 2 folders ,one is named enable & the other named disable. now you are ready to open each and click what ever features you like to be enabled and whatever to be disabled.
At this time you are ready to go for the Theme selection which means at what intervals you want the choosen features to fire ,you can try the "01M" which means that the software will fire every 1 minute to execute the selected feature (or features if you choose others).
For example ,if you want only the signal detection feature ,go to disable folder and click all features to disable them all ,then go to enable and only click the shortcut named "Signal".
Once done .. every 1 minutes (since we choosed "01M") the phone will execute the selected feature (or features). in some phones the system cannot walkeup itself to execute the so called notification tasks at given times if it was in "Sleep" or "Deep Sleep Mode". So you can check your phone reaction to such notification tasks.
To make sure we are ready to go ,you must check first that your phone registry key when the phone is on and receiving signal looks like this :
[HKEY_LOCAL_MACHINE\System\State\Phone] the value of "Cellular System Available" must be 65
to do this test just download Fred Taskmanager free from this link
http://www.dotfred.net/TaskMgr.htm
once downloaded install it ,open it and go to RegEdit tab and go to [HKEY_LOCAL_MACHINE\System\State\Phone] & check for "Cellular System Available" number .. it must be (65) i mean the number between brackets.
If this is the case ,the program will correctly do the job. but if it isnt (may vary from phone to another) ,then this number must be modified in the software to read correctly ,Go to program installation folder " \Program Files\TamerSpClock\Data\Signal.mscr " rename the file "Signal.mscr" to "Signal.txt" then open it by any notepad or word ,then check the line "if(%PhoneActive% = 65)" and change the 65 to be like the number that you found for your phone in the normal signal state. Do not forget to rename it back once finished to "Signal.mscr".
Thanks
Thanks going to test on my lovly hima.
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
kino-kino said:
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
Click to expand...
Click to collapse
The reply is that you take the number between brackets on the idle state without conecting to any network ,because the idea as you can see from the code that there is 2 conditions must be fullfilled to fire the signal alarm which is 1- if the signal in the idle state be so and so and 2- in the same time signal drops to so and so ... Bingo ... fire
So ,now you got the idea of the code & can now modify it to fullfils your needs ,and you are ready to put your constants that reflects the state where you want spclock to fire. wishing this could help .....
timoz73 said:
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
Click to expand...
Click to collapse
Thanks, with Blackme, it works now.
dont work with my diamond
great sharing.
thanx.
Dynomite232 said:
dont work with my diamond
Click to expand...
Click to collapse
Dynomite232 ,Kindly feedback whether the mortscript program didnt run on diamond or the TamerSpClock itself. i didnt expect this to happen from the Diamond of a VGA screen since my software didnt realy have a User Interface Menu ,its only shortcuts. In addition that Mort do support any windows mobile device.
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Reply to Kino-Kino
kino-kino said:
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Click to expand...
Click to collapse
Kinio-Kino for your described situation the case will be as follows (copy & paste what is below between the # signs to replace what is inside Signal.mscr ,you can find this file inside a folder called Data inside the program folder inside Program Files)
###################################################################
ErrorLevel ("syntax")
SignalStrength = RegRead("HKLM", "System\State\Phone", "Signal Strength" )
PhoneActive = RegRead("HKLM", "System\State\Phone", "Cellular System Available" )
if(%PhoneActive% = 0)
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
if(%PhoneActive% = 8)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
if(%PhoneActive% = 1)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
###################################################################
You can now Download the latest version v1.03 ,I build a new user interface for this software instead of the icons .Before Uninstalling Do the process of "StopingAll" feature then make a new Install to v1.03.
.
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
kino-kino said:
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
Click to expand...
Click to collapse
kino-kino ,Welcome again & thank you for your feedback. The Cab file targeting the storage card have been updated in the main thread page.
you are asking now about 2 subjects ,the first one concerning the signal alert didnt fire during deep sleep of the phone ,i think you might try to make the speaking clock feature active along with the signal alert feature ,maybe it will wakeup your device to fire at the specified times, of course if its voice is annoying to you can try deleting the clock wav files but leave of course the signal.wav without deleting. I wonder this happens to you although my Htc Tytn wakeup and fire Signal Alerts at specified times.
The second question can be solved simply by downloading "HomeScreenPluPlus" from the following link:
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#Download
This software is free and have a feature in the second UI page of options that lock your device when the screen is off and vice versa ,see this pic for explanation.
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
hung_ng said:
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
Click to expand...
Click to collapse
yes i know hung_ng ,i made the blackme feature as a separate item in folder links so that you can assign its icon to a hardware button to be easily accessed so that when you are using your phone you can easily deactivate BlackMe.
This annoying feature (from my point of view as you eaxactly) is essential in many phones ,as the system cannot wakeup the device from a deep sleep to do the choosed actions. the blackme feature (also known as "ToggleDisplay=1") force the phone to wakeup to fire the action. if it is disabled many devices will fall in deepsleep without being able to wakeup. the last version 1.3 have this separate shortcut that i explained.
Another idea i made in my Tytn and made me feel comfortable is that i made my telephone sense when a specific window is open ,the blackme is disabled automatically and when i close this window it reverts automatically to be enabled. for example i made RescoExplorer2007 window when it is opened the blackme is disabled & serving me while i work ,and once i finish i close Resco and automatically blackme returns active and conserving my battery life.
Sorry for being long in my explanation but if you are interested in the idea ,i can make a version for you that is capable of deactivating BlackMe once a specific window is opened. i am not a programer ,i am an Architectural Engineer that once upon a time needed this software and didnt find a really satisfying one available all over the internet ,so i decided to learn Mort Script and i write a one satisfiying my needs and by the way i think that it might help other people who might need it as me.
Hi,
Only had my HD2 for a couple of days having come from iphone and have a couple of gripes with it. Maybe it's just me though as never had a windows phone before.
When using opera internet browser you have to zoom in quite a bit to press links, which I find a little annoying. I've tried skyfire which is much better, but you can't use pinch/zoom. Is there a browser that has the best of both worlds?
Is there a quick way to turn bluetooth on/off without having to go into settings?
Is there a quick link to profiles? I know if you hold the end call button you can select between vibrate or ringer, but not silent. I must admit, this is one thing I liked about the iphone, there was a simple switch to change from silent/ringer without having to turn the phone on and press buttons.
When making/receiving calls sometimes the screen comes back on and my ear presses other functions, or disconnects the call. Has there not been a fix for this issue yet?
The call quality isn't great, sometimes the caller distorts on certain words/letters
And finally, is there any way to change the vibrate? Can it be set to 'pulse' rather than just a continous vibration. Can it be set just to give one or 2 pulses when receiving a sms/mms message, rather than vibrating for the full length of the message alert? (I've personalised mine and goes on for about 10 seconds)
I think the phone is great, and these niggles aren't the most major of things (accept the screen turning back on during calls) but it would make the phone more of a pleasure to use.
Cheers
There are fixes or programs for most of your niggles, but they may not integrate with the HTC Sense interface! That's one downside of such a deeply coded front end, and one reason why I personally have stopped using it!
There is a file available which can allow links in Opera to be clicked when zoomed out- sorry, but I don't have time to link to it at present!
For profile and radio (BT/WiFi/Phone) switching, I'd recommend SBSH Phoneweaver . OK, it costs $15 but you can set any number of profiles with switching based on time, location, busy status etc, or manually. The pop-up menu also has a set of switches for the various radios. It can be launched via one of the 3 Program buttons on the front page of Sense, or via a small icon in the Taskbar. I'm, not sure if it can have the vibrate times defined or not!
NeilM said:
There are fixes or programs for most of your niggles, but they may not integrate with the HTC Sense interface! That's one downside of such a deeply coded front end, and one reason why I personally have stopped using it!
There is a file available which can allow links in Opera to be clicked when zoomed out- sorry, but I don't have time to link to it at present!
For profile and radio (BT/WiFi/Phone) switching, I'd recommend SBSH Phoneweaver . OK, it costs $15 but you can set any number of profiles with switching based on time, location, busy status etc, or manually. The pop-up menu also has a set of switches for the various radios. It can be launched via one of the 3 Program buttons on the front page of Sense, or via a small icon in the Taskbar. I'm, not sure if it can have the vibrate times defined or not!
Click to expand...
Click to collapse
Thanks for your response. What are you referring to when you say radios? Please forgive my ignorance, I'm still learning
You say that you have stopped using the HTC sense interface so what do you use instead?
Just having a look at the phoneweaver, can this be used with the sense interface? Does it overide the phone settings?
Radios = WiFi, Bluetooth and Phone Radio. These are the things you see in the Comm Manager with the little green On/Off sliders
I'm now using a 'Light' custom ROm without the HTC Sense stuff. I prefer to use a plain 'Home Screen' (which you can achieve by going into Settings/Home (or Today) and selecting the Items tab. From there you can turn on or off any of the Today items or Sense itself.
A lot of the programs I use have their own Today screen plug-ins which suits me fine- Resco Contact Manager, Elecont Weather and Chronos clock/alarms, plus I use a Launcher program called Launchpad by Panoramic Software that is opened by tapping the top left of the screen; this has 40 definable 'Favourites' links plus a full set of Programs/Settings links.
Back to work now!
snerkler said:
Just having a look at the phoneweaver, can this be used with the sense interface? Does it overide the phone settings?
Click to expand...
Click to collapse
It can take over all the phone settings and can be manual or scheduled, plus some other useful switching options. You can try it free for 15 days!
NeilM said:
Radios = WiFi, Bluetooth and Phone Radio. These are the things you see in the Comm Manager with the little green On/Off sliders
I'm now using a 'Light' custom ROm without the HTC Sense stuff. I prefer to use a plain 'Home Screen' (which you can achieve by going into Settings/Home (or Today) and selecting the Items tab. From there you can turn on or off any of the Today items or Sense itself.
A lot of the programs I use have their own Today screen plug-ins which suits me fine- Resco Contact Manager, Elecont Weather and Chronos clock/alarms, plus I use a Launcher program called Launchpad by Panoramic Software that is opened by tapping the top left of the screen; this has 40 definable 'Favourites' links plus a full set of Programs/Settings links.
Back to work now!
Click to expand...
Click to collapse
Cheers for your help
If you read this sticky thread you will find the answers to all of your questions:
http://forum.xda-developers.com/showthread.php?t=583638
It should be pretty obvious since its the first and most talked about topic.
Enjoy.
lorin.bute said:
If you read this sticky thread you will find the answers to all of your questions:
http://forum.xda-developers.com/showthread.php?t=583638
It should be pretty obvious since its the first and most talked about topic.
Enjoy.
Click to expand...
Click to collapse
Thanks for that thread, the trouble is I'm not a real computer/phone buff (yet) and so a lot of it goes right over my head. I don't even know what registry's are, and wy you need to edit them???
Ok, the concept of registry is quite simple. I'll put in a way so anyone can understand. Its a repository of stored key/value pairs.
Imagine a folder like structure, when you open a folder you will find a series of keys which, when opened, reveal the value.
Every key/folder is used by the OS or by some application. Its where all the back door settings are stored. So if you wanna make an app or the OS behave in a way you need to change the settings.
Using the registry is easy, but you have to make the first step... so what are you waiting?
lorin.bute said:
Ok, the concept of registry is quite simple. I'll put in a way so anyone can understand. Its a repository of stored key/value pairs.
Imagine a folder like structure, when you open a folder you will find a series of keys which, when opened, reveal the value.
Every key/folder is used by the OS or by some application. Its where all the back door settings are stored. So if you wanna make an app or the OS behave in a way you need to change the settings.
Using the registry is easy, but you have to make the first step... so what are you waiting?
Click to expand...
Click to collapse
Can I bugger up the phone if I don't know what I'm doing?
You can always make a backup of the registry you are changing. In resco registry editor tap and hold and press export. If the changes you made are not good, go to the folder where you exported the backup and open it. It will automatically imported and problem solved. But if you follow the instructions you won't have any problems, just don't change the registry for something you don't know or never seen in any tip/suggestion.
You could affect stuff if you dont do it right... but if you follow the instructions carefully without any typing errors, you will be fine...
Use this to Turn off BT easily.... it also does a lot of other stuff... basically, your bottom left softkey will become an "action" button... prssing that will bring up the screen shown in the screenshots. Works really well for me... also give you soft reset options without opening the back cover or powering off
http://forum.xda-developers.com/showthread.php?t=587493&highlight=action+button