What are the closest to the Real HTC TOUCH rom's here for the Blue Angel and which ones are the fastest including the cube and PIE touchflo HTC Camera ect.... the whole deal
I am new to this area as my Wizard just took a dump on me..
I have a Siemens SX66 on the way and I cant wait to add a WM6 rom (hopefully HTC Touch) on it..
there is no htc touch rom for BA.
i´ve searched for it, too.
the BA display driver is not compatible to touchflo
No true
This is not true, the cube is functionning well on my Blue Angel.
Just download one of the full package with touch flo and the cube (+- 4 mb) and install it. I use vista cube without problem.
eurorpeen said:
This is not true, the cube is functionning well on my Blue Angel.
Just download one of the full package with touch flo and the cube (+- 4 mb) and install it. I use vista cube without problem.
Click to expand...
Click to collapse
That sounds great Can you please give me some threads here where I can do that my BA will be here any day now
Vista cube
Do a search on this forum !
http://forum.xda-developers.com/showthread.php?t=350011
Thanks this is a great start I'm just use to my wizard were you could load the rom and youre done badda bing all the touch goodies.
But it seems not so with the BA so far it seems I have to add touch commander htc home and so on and so forth to my flash card to get anything working
I figured that with 400 MHz as apposed to 195 and a bigger screen and roms like they had for the wizard I would be in blue angel heaven.
But so far everything has been pretty much all over the place with this thing as apposed to cut and dry
Related
does anybody know if there is going to be a version of this for hermes
i have seen it working on an xda orbit and it is very sweet
much can be done without the need for stylus
cheers
Flo Touch For Hermes
Hiya,
This is out already. As good as it is I only give it 5.5 out of 10.
Once you get past the initial buttons (as it is on the actual HTC elf/touch phone itself), you still need a stylus. This makes it less than ideal in this man's opionion.
A iphone it is not.
So you can add all the touch aspects, but it will likely leave you wanting as it did this chap.
I actually removed it after a day or so.
The screen on Schaps 3.6 is very touch flo like and I prefer it
Also I prefer icontact (like an iphone) to the touch.
Enjoy!
------
Imate JasJam
4gb SanDisk
BT Radio 1.50
Schap's WM6 Pro 3.6a Beta
iContact v0.2
Shoesize 14
Please post in the already open discussion topic for this.
As said above.
I dont get why we were not given a cube, when it seems everone else has
Awell, anyone know if any other already made one's will work ?
My neighbour whos got one has managed to get a few apps installed already, ill try to post them later on.
Hi
it seems we were not given a cube primeraly because we have a bottom-end machine.
we have the same chipset as for instance the touch, yet we have no wifi and 3g (we do have GPS whichs kicks ass!) not that 3g and wifi is neccesary, i think 3g and wifi have been disabled in our device.
pls read this thread, and if you can help with the files that would be great!
http://forum.xda-developers.com/showthread.php?t=395475
pharos device running chip omap.I think possible port touch flo cube for pharos
Touch Cube woks on Pharos
I installed Touch Cube (ported from Polaris) into Pharos the other days. Work fine for me...only a bit slower than 'Elfin, Dual, Polaris' while operating. Need some more registry adjustment, I guess.
Screen is not flat
It works on Pharos, I have tried and finally removed.
BTW, I don't think running Cube in Pharos is good because the LCD screen is not flat like Elf/Elfin, Dual or Cruise.
suracha said:
It works on Pharos, I have tried and finally removed.
Click to expand...
Click to collapse
Which version did you try? and how did you get it to work?
BTW, I don't think running Cube in Pharos is good because the LCD screen is not flat like Elf/Elfin, Dual or Cruise.
Click to expand...
Click to collapse
It might not be, but it wasnt a good idea for the touch cruise either because they dont have the grapics driver ive heard complaints that its very slow on the polaris
I still want it .. because then i can choose whether to keep it or not... its mostly eye candy anyway. I find the htc home plugin works great too
Shame I didnt get a reply from suracha, bita would you like to share what you did to get the cube installed and working?
Here is where i am.
I have installed touch stettings v1.22 by Carlos(fatattitude.com)
I installed the Kokotas cabs quickdial and Biotouch.
Also I've put files in the windows dir: MediaHubMini.exe, APLauncher.exe,LaunchStartupApp.lst and startupbiotouch.exe
A guy that has the polaris has sent me his reg settings.. so now Im looking through those!
And it seems i miss some in the hklm\biotouch so Im gonna look some more and then change my settings maybe that will help!
I wish to add these to a ROM, however I'm unable to find a VGA compatible action screen, although I know that it is cooked into the AP ROMS.
Does anyone have the .cab?
Also I wish to install the touch diamond keypad. I love it, however I wish to use it with Opera Mobie 9.5 and I found that when installing the QVGA version onto my kaiser both of the downloadable keypads I tested did not display any letters or numbers from within Opera - for example in the google searchbar -the only one that did was cooked into the Dutty Diamond V1 ROM.
I am awaiting a Toshiba Portege g900 that I got dirt cheap and this keypad would make the world of difference to me. I have found one re-scaled vga keypad - can anyone confirm that this works well with Opera Mobile 9.5?
Kind regards in advance.
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
I am quite sure that WM 6.5 needs to be installed instead of WM 6.1.
About the Touch flo's im in the same boat... i just would like the "best" version as a panel. So thank you for bringing this up
Windows mobile is the platform on which all your programs run, including the panel manager and touchflo.
There's currently two* versions of TF3D, TF3D 1 and TF3D 2. Manila == TF3D.
The best and newest at the moment is TF3D2, as stickied, it has landscape support, but it also has a few bugs, as it's a beta build. All in all, it works more that good enough.
Best thing I can recommend is flashing one of itje's ROMS, preferably the new 4.0, which has TF3D2. This way, you'll have TF3D as your homescreen, but also the panels.
* Not including different beta's.
Alright thanks a lot, looks like I'll be installing that Touch Flo 3d2 ROM then.
Quick question though. Even if I flash this I'm going to assume I'm not resetting windows mobile since the xperia interface and touch flo 3d are just "skins" for windows mobile, so I wouldn't have to reinput all my settings?
When you flash your ROM, everything will be erased.
If you however just want to install TF3D and keep everything, you will have to wait for daran_clarke to finish his TF3d .cab, which you just install on your phone just like any application.
i recommend running TF3D2 from a rom, because the responsiveness and speed is increased alot. i recommend itje's touch it landscape ver 1.1 rom, as this is the most stable and normal version, as opposed to ver 4 which is lets say... a bit different. if you are intersested i will provide the rapidlinks to this no longer available rom
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
NiklasK said:
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
Click to expand...
Click to collapse
Itje's V4 is (although the filename doesn't tell you this) still in it's beta stages. Some problems will still occur, but Itje is working on it.
That's the reason flext recommended you 1.1.
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
NiklasK said:
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
Click to expand...
Click to collapse
Nope, that seems to be an unrelated problem. I've never seen reports of EDGE failing after TF3D installation. If the problem persists, you might want to try a hard-reset (also removing TF3D again).
flashing to tf3d 2 rom
iam kinda new at this and iam trying to flash to tf3d 2 rom because the theme that iam trying to get does not work with my stock rom..
NiklasK said:
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
Click to expand...
Click to collapse
TouchFlo 3D 2 works in portrait and landscape mode [latest version]
TouchFlo 3D 1 has touch flo tabs but only in portrait mode
Manilla is the TouchFlo cube [it isnt touch flo 3d at all]
Manilla HD is the same as Touch Flo 1
Manilla V2, I think is Touch Flo 3D.....
Forgive me for the guessing...I don't use touch flo
Hi all forum members,
I found this s/w XEND Touch Flo which actually changes the touch flo theme to a red color is exiting to see as am bored with the regular pre installed blue color.
I have HTC Touch P3452 (Elf 100) and am not able to install this.
Can anyone give me a link to download the correct file and the steps to be followed to install it in my elf.
Looking forward to hear from all of you.
I hope the developers can answer this to the best.
Also is there any other way or s/w which can be used in my elf to change the look and feel of my touch flow - I guess my touch flo is a 2D version and my elf has WM 6.1 with Qvga........
Joyjeet, our devices are 3 years old (dinosaurs in terms of smartphones) and touchflo has been removed from all cooked roms because of inefficiency and appetite for ram. All this to tell you there are very few ppl who actually know about touchflo
tito12 said:
Joyjeet, our devices are 3 years old (dinosaurs in terms of smartphones) and touchflo has been removed from all cooked roms because of inefficiency and appetite for ram. All this to tell you there are very few ppl who actually know about touchflo
Click to expand...
Click to collapse
Tito - your information is nice but am not getting the answer to my question.
I want to know few things
First is how to use this xend red touch flo theme in my elf 100.
I want to know of how to upgrade my WM 6.1 to WM 6.5
I want to use the 3D version of touch flo or atleast a way to change the boring looking blue theme of touch flo present in my elf 100
I need changes
Hi
I can only answer to your 2nd question that is http://forum.xda-developers.com/showthread.php?t=426540, imho these are the best ones. Read the faq and post your device info 1st.