Related
Hi,
As per the title... I have a problem getting back my pushmail after upgrading to WM6.
I am with SFR. I updated the ROm for the Radio and the whole WM. Went from WM5 to WM6 (3.23). Everything went well. except that when I reinstall the setting for the push mail with the small piece pf software coming from SFR, it doesn not download mail.
Account is created. Network connection is alive. Everything is fine except it does not work... lol
Thanks for your help.
I had the same problem, checked the activesync error code and found that push mail works when activating SSL encryption.
the error code I had was : 0x85010014
But I do not use Activesync to sync my mail. I use pushmail. Liveconnection. Maybe I do not understand your point.
Thanks.
When you say pushmail do you mean you have setup an account in activesync on the device??
Or "pushmail" is a 3rd party software package ??
This is a third party software but that is almost the only feature that worth to have that knif of phone. This is the same thing as a Blackberry mail system. But on a Microsoft OS.
I know we can set it up directly but it is not alwats alive.
So I use the SFR (The phone company) third party to do the job. It works throufh "Visto" company.
I create a network connection based on GPRS that stay connected with the phone company. The mail software is then able to stay connected as it would be for outlook through exchange. The diffrence is that my account is a pop3.
The service for SFR is provided through push.sfr.fr using Visto Technology.
Since the software is not designed for WM6 (it will have been designed for WM5) it may not work as intended. Unfortunatly you may have to wait until a newer version is available.
That is excatly the answer I was hoping not to receive ;-)
Thanks for your help.
I've isntalled the WM6 LVSW Edition 3.23, do you think it may change somehting If I try the others like the black one or the other?
I dont' really know the differences.
I would recommend upgrading to the latest version of LVSW, its based on a newer WM6 build.
To make sure you have all the recommended stuff on your phone follow my guide. This will make sure you have a fairly up to date device
Suggestion for Push mail
Check if the GPRS setting is wap.cingular or isp.cingular. When I upgraded to WM6, I had my GPRS switch to wap, and when I reconfigured it to ISP, my push mail started working fine again.
If you do not know, you can search for the GPRS configuration in this site.
All the best.
Thanks to alll of you.
I was able to get my mail but using the regular Internet account through the WM outlook. It is less efficient than with the live one.
I've alreayd used your guide with the 3.23 version. But it seems there is a new release every 2 days. I see the 27.3 is now out!
What the diffrences between
XDA Live v0.20.x
LVSW (27/3/2007)
VI Black Edition v1.2
Is that all different version of WM6? Should I hang on LVSW?
Thanks!
Can't find the setting about the WAP/ISP for gprs.
And about the upgrade for WM, it seems that I already have the latest.
IS there a new version that kept the same 3.23.0.2?
Thanks.
I'm also having no luck with the Visto software since updating to wm6. It installs fine and seems to run as it always did, even down to it connecting to push.vodafone.net and saying "connected" and displaying my mailbox name. The problem is emails just aren't getting through!
Also, if I go to the mailbox in the messaging program and try to select "New" it just pauses for a long time and doesn't open a new message so I can't try sending messages.
Any ideas? it seems to be almost entirely working, I'm sure there's some configuration that can be done to fix it?
I found a fix!
A new version not-really-yet-released of the SFR Push Mail software. As soon as I did a clean uninstall / install it connnected ans start to download mail!
Where did you get that version from? Is it the standard Visto software? What version is it?
Thanks.
Got it from the Visto support in Paris. the version is ni my signature. This is the Visto software but for SFR only.
If you are stuck without the real push mail, don't forget you can use a regular pop config on your WM outlook using the Internet connection from your GPRS. It is just not as good as the real tool.
The problem is that my 3G/GPRS data is limited whereas the push mail data is unlimited, including attachments. So push is my only real option.
Does anyone know if there is an actual WM6 device on the market yet that I could say to Visto I'm using?
Hi,
I'm having the same problema as you. Upgraded my Tytn to Windows Mobile 6 (LVSW 26-03-2007 version) and now my Visto push email software does not retrieve any email (I have Vodafone Real Mail Service in Spain based on Visto solution).
The service is the same as SFR in France (and others). Please, could you post your application so I can download and use it (I don't mind having it in french).
Thanks and regards
To all,
Please contact me directly if you want to get WM6 compatible VISTO soft for your PPC.
Just tell me exactly what is your OpCo (VF ES, VF ITA, SFR, etc...) and your GSM number.
Regards,
gvernot.
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
mate, u can just ask the mods to change the title of the other topic....
AirwolfUK said:
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
Click to expand...
Click to collapse
Thanks for your workaround and I managed to get my BB Connect working on my Touch Pro 2 and I am using BIS.
Blackberry Connect is Working on HTC TouchPro2
Dear All,
Rejoice HTC TouchPro2 owners. Blackberry connect for working on HTC Touchpro 2 now. Just follow http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35 this web-link and you will achieve your intentions.
Can't get it working for long on mine
I have followed the instructions given in the link, and can get BBConnect 106 to work on my TP2, but only for a while ...
The BBConnect 106 loads, I get BES connection, email, contacts, calendar, notes and tasks downloaded ... manage to send and receive a few email, then it all stop ... with some very strange behaviour.
I have tried everything I can think of to get it working consistently, but can't manage it. I get the impression that the BBConnect is being loaded some place where it should be ... not very technical I know, but thats the way it appears.
The TP2 I have is a Hong Kong English Language version ... WWE ... not sure if that makes a difference.
ROM and Radio version ...
The version I have on my TP2 are
ROM 1.19.721.3 (51489) WWE
Radio: 3.44.25.27
And to correct my typo in the previous note, I think the BBConnect is being loaded shmewhere it shouldn't be loaded, which is causing other features and functions of the phone to mis-behave ... as an example, I was unable to search for new networks manually ... lost the Roaming flag on the top of the screen (small triangle sign), was always displaying GPRS connection, even when not connected to the network (so E (edge), or G being displayed ...)
I also tried version 104 of the BBconnect, just to see if it was version 106 specific, but this didn't make a difference.
Apart from that, the phone is close to perfect, for me at least ... particularly like the way the screen blanks when you are making a call and put it close to your ear, then comes alive again when you move it away so you can see it and access it. With the TP, I was always putting calls on hold when I put the phone to my ear ... also like the way the speaker phone is activated automatically when you place the phone face down.
Now if I could only get BBConnect to work, it would be perfect
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
HeavyComponent said:
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
Click to expand...
Click to collapse
My company disables sync with Exchange and I can only get work email with Blackberry service. I think it's a common problem.
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
BB CONNECT Messenger?
Can BB Messenger be used with BB Connect?
Windows Mobile 6.5 and BlackBerry Connect
Guys, I would like to hear from someone who understands the 6.6 environment whether you think upgrading into WM 6.5 will allow me to still use the BBerry Connect. has anybody tried upgrading a Rhodium and then try the BBerry?
Quophi said:
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
Click to expand...
Click to collapse
rsacipher said:
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Click to expand...
Click to collapse
RSACIPHER: I had same problem. could not change Model ID. What is Memmaid and how did that work?
Also
C0RNHOLIO: maybe you should look into why this is happening so that your solution works all the time. Mine is a T-Mobile Rhodium.
Thanks to both
And what about a HTC Rhodium with WM 6.5? Try it but didn't get it.
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
AirwolfUK said:
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
Click to expand...
Click to collapse
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have been running BB on my TP2 on 6.1, 6.5 and 6.51 roms with Sense 2.1 and 2.5. They all work, and no, I cannot have multiple data streams so when I use the browser my BB connect shows no connection. If I disconnect data, sometimes BB automatically connects but generally I have to run BB connect, disconnect and reconnect (so I added a shortcut to it on my programs).
For me, using 6.51 and 2.1 gives the least trouble. I dont know why.
BTW I keep getting reminders that there is a new BB Desktop update (5.01).
good idea on adding the shortcut. I have found that it rarely reconnects and I had to turn off the auto update for the weather or I would start missing emails. I hope someone gets a fix for this soon as this is the perfect email phone...
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have two streams (BB & Contract Internet) running at the same time.
I am on UK Vodafone contract so that probably makes a difference
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
Having concurrent connections two 2 APNs simulatiously only works for GPRS (as far as I have observed on all my past and current devices).
So if you want to have BBC and Internet at the same time you need to switch to GPRS only and disable auto band switching for 3G. If anyone knows a way to get concurrent connections working on 3G, please post how.
EDIT: The infos in the follwing post should do the job:
http://forum.xda-developers.com/showpost.php?p=2382465&postcount=37
I have been seeing various posts on people struggling to make BBConnect work on HTC Touch Pro 2 a.k.a Rhodium and thought I would put down a step by step guide from various posts put down through this forum So rejoice all you HTC Touch Pro 2 owners like me BB Connect is finally working and so is Multiple APN's. I have BB Connect Enterprise and GPRS connecting simultaneously and its showing up on the notifications manager.
This step by step solution is thanks to Cornholio, Absahnen & NRGZ8(The Master Chef who cooks wonderful ROms across devices)
So Here Goes
Step I: GET YOURSELF A NEW ROM:
Trying to install Blackberry Connect is very buggy on most of the stock ROMS and will keep on failing. So go and get yourself the latest NRGZ8 ROM for Rhodium I am using Build 21877 27th Nov Standard Manila 2.1. The ROM is anyway faster with almost no bugs and free of Junk that you see on standard ROMS
download the ROM from this link:
http://hotfile.com/list/93322/b5a2687
Step2: CHANGE AKU SETTINGS
This change is needed to make BB Connect work on WinMo 6.5 ROMS.
Using a registry editor go to HKLM/System/Versions
There you will see the aku key usually on any WinMo 6.5 ROM its .5.xx.xx change the aku value to .1.6.0(.1.6.3 didnt work, the connection was getting dropped)
Step 3: FOOLING YOUR BB CONNECT SOFTWARE TO THINK YOUR DEVICE IS A RAPHAEL
The Rhodium is not yet supported by RIM and looks like they have withdrawn support for further devices. Therefore you need the BB connect to believe that your Touch Pro 2 is a Touch Pro i.e. Your Rhodium is a Raphael. To do this you have to make registry changes you can use any registry editor I used Resco Registry Editor which loads when you load Resco Explore on your device To do this follow the steps below very carefully, using the registry editor
Instructions:
------------
- Uninstall any BB Connect software if you loaded.
- Attached find a rar file which contains SetModelID.exe. Unzip it and copy it over to the \windows\ folder of your device.
- Using any registry editor of your choice navigate to HKLM\init Create a new String Value with the name "Launch130" and a value of "SetModelID.exe" (without the quotes)
If Launch130 already exists, choose a number greater than 130, it doesn't really matter, just make sure it is higher than the other entries so it get started after everything else.
This makes sure the exe isnt started after every softreset.
- Do a softreset
- The program changes your model-id from "HTC-Rhodium" to "HTC-Raphael" in memory
- Install Blackberry Connect like you usually do (My tests where successfull with version 4.0.0.106)
- After installation and the auto-reset through BBC open the BBC settings and go to the Info-Tab. Under device-name there should now be HTC-Raphael.
- If you're using BES configure your device using enterprise activation or the BB Connect desktop app
STEP 4: ENABLING MULTIPLE APN'S
This will allow you simultaneously have an active BBConnect and a GPRS connection active at the same time
Go to:
HKLM\Software\OEM\RIL\OperatorContexts
There you will find several numbers. E.g. 26202 for Vodafone in Germany.
The number is a combination of MCC / MNC so 262 02. You might find you operator in this list:
http://surfio.de/info/mcc_mnc/mcc_mnc_liste_6.html
or do a google search for your specific operators MCC/MNC nos
Create the two DWord Value Entries below if they arent there:
GPRSContextNumber = 3
UMTSContextNumber = 3
Just set the Contexts value to 3 and delete the NetworkContexts entry. It will be created from the source above with the value 3.
And voila you will have multiple connections running simultaneously you can get your BB Mails as well as see Youtube videos over GPRS. I managed to do this over a frustrating 48 hour period and I thought will share this for anyone seeking an answer.
Cheers and enjoy
Man! The guide looks great! but it makes my brain hurt!!! Arggg!!!
(Hardly understand some part of the guide.)
: )
Heres my step by step, plus all the software and a cab called black berry that someone else kindly put together for me that does all the registry steps (and makes the multiple APN switch for TMOB US). (BTW this has worked on EVERY ROM I have used, 6.1, 6.5, 6.53, sense 2.1 and 2.5):
['black berry cab' does all these]:
Copy SetModelID.exe into windows
HKLM\init: Create a new string: Launch130 with value: SetModelID.exe
HKLM\system\versions\aku - change to .1.6.3 [which works for me]
HKLM\Software\OEM\RIL\OperatorContexts\...
Create new ones or edit your relevant operators GPRS and UMTS to 3
[for US find them in http://en.wikipedia.org/wiki/List_of_mobile_network_codes_in_the_United_States]
HKLM\Comm\Cellular\RIL\
set the Contexts value to 3
Delete the NetworkContexts entry
Soft Reset
Install BB Settings CAB
(I always create a shortcut in programs from 'BB Settings' in Program Files/Blackberry - its a quick way to run this file later)
Either: Using BB connect desktop for WM 'configure wireless handset' (see below)
Or: get new key generated by your company's tech support and enter them into BB Settings on your device
(Activesync blackberry connect desktop setup can be found at http://sems.org/content/download/bbc4/bb_desktop_4.0.0.22.zip. I use this becuase YOU CAN GENERATE YOUR OWN KEY and configure your handset again and again which means you dont have to bug tech support every time you burn a new ROM, which I do every few days!)
for some reason I cant upload the blackberry connect cab, so here is the link http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.106.cab
black berry cab is attached.
what150 said:
Man! The guide looks great! but it makes my brain hurt!!! Arggg!!!
(Hardly understand some part of the guide.)
: )
Click to expand...
Click to collapse
Well what can I say Mr What 150 was trying to help. The step by step guid is written keeping noobs in mind so that you dont get back Q's on How to do this? and How to do that? and help ppl besides just those in the US who cant use the cab posted here anyways and dont know how to write complicated XML codes.
Thanks a lot patcat!!!
I had my rhodium working with BB connect but no multiple APNs... had to manually suspend BB service and enable GPRS everytime I needed anything from the internet. Those days are gone now!!!
Now, have you ever wondered why is it that BB Messenger, being a Java application, can not be ported to WM and run on our TP2s? I mean, we have our BB data plans, a PIN# and are connected to the Blackberry service.. what else do we need for BB Messenger to work?
Roberto Gonzalez said:
Thanks a lot patcat!!!
I had my rhodium working with BB connect but no multiple APNs... had to manually suspend BB service and enable GPRS everytime I needed anything from the internet. Those days are gone now!!!
Now, have you ever wondered why is it that BB Messenger, being a Java application, can not be ported to WM and run on our TP2s? I mean, we have our BB data plans, a PIN# and are connected to the Blackberry service.. what else do we need for BB Messenger to work?
Click to expand...
Click to collapse
You are welcome Roberto. I havent yet come across any cab for BB messenger. There has been talk of a BB application suite to run on WinMo but I havent seen any beta's also of that floating around. If you do come across any BB Messenger cab do post it here or PM me the cab.
Most reliable method
Here is what I do...I think it is the most reliable method....and I have used it with just about every ROM out there and it works...everytime...It looks like a lot of steps but it is very easy and after the first ROM flash you will know what do do for any others...I actually learned this from this site and MUCH smarter people than me...so thanks to all those who helped get Blackberry Connect working. Without this site I might still have an 8525 because I need blackberry connect...!
Installing Blackberry connect...this has to happen in this order...
1. Download a ROM
2. Edit the ROM using the information from here, it looks complicated but takes less than a minute essentially you use the program you download to change any reference to Rhodium to Raphael using a search: http://www.silentservices.de/HexEdit-ROM-for-BBC.html
3. Flash the edited ROM.
4. Install the CAB file I attached it will change the AKU for you...I actually put it in my UC script so it automatically installs before Blackberry Connect...
5. Install Blackberry Connect version 4.0.0.106
Allowing Multiple APN's (This can happen at ANY time)
Follow step four in the original guide or if you are AT&T all you have to do is use a registry editor and go to HKLM\Software\OEM\RIL\Operator Contexts\310410 and change UMTSContextNumber to 2. If you use 2 then you don't have to worry about anything else like deleting the Network Contexts entry....
BBC
Works excellently on my TP2 with .106 cab on Vodafone India network at Delhi.
Good work bro, well sorted out steps
PIN Pending
Hu there, Thanks for all your help, The device has changed into Raphael but I still get PIN pending? how can I have Blackberry Service if there is no pin? help please
Patcat007
You are the got damn man!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
PIN Penidng No Connection
Hello,
I have done as per above steps but I am still getting Pin Pending. I am using HTC touch Pro 2 with Win Mo 6.5. In BlackBerry Connect About Device Type is HTC-Raphael.
Please help me what to do how can I resolve thie issue.
Address book, Sending pictures via Email not available
Hi,
I've got everything working thanks to you guys.
When composing a new Email, the address book is not being used (no Auto completion or suggestion).
I would take a picture from the camera but the option to send via Email is greyed out with the account setup via BB.
No HTML Email viewing.
Is it designed to work like that with BB Connect?
PIN Issue
foolyfaltoo said:
Hello,
I have done as per above steps but I am still getting Pin Pending. I am using HTC touch Pro 2 with Win Mo 6.5. In BlackBerry Connect About Device Type is HTC-Raphael.
Please help me what to do how can I resolve thie issue.
Click to expand...
Click to collapse
PIN is provided by GSM service provider. These step enable the BBC software to accept your handset model as compatible for BB services. Its not a hack for working BB without BB activation. Get the BB services activated from GSM operator and u shall have a PIN also.
HTCSOCAL said:
Hi,
I've got everything working thanks to you guys.
I added what I know...it does seem since Blackberry connect is an older program everything ends up like a work around...
When composing a new Email, the address book is not being used (no Auto completion or suggestion).
It won't auto complete. If you click the menu and use the "check Names" feature it will first look in your address book and then if you hit Lookup it will look in the global address book. A little more cumbersome but it works.
I would take a picture from the camera but the option to send via Email is greyed out with the account setup via BB.
I have not been able to send photos from the camera in the last several Roms...so I think it is the newer Album that doesn't allow it. You can still send it by attaching it when creating an email, but yes this is a little cumbersome as well...
I only have one email account setup on my device which i
No HTML Email viewing.
Yes that is correct...
Is it designed to work like that with BB Connect?
Click to expand...
Click to collapse
Hope this helps...
mumboender said:
Hope this helps...
Click to expand...
Click to collapse
I also had seen those issues with my HTC HD on WM 6.1.
Another one is clicking an URL in the Email body gives me an error (The parameter is incorrect).
Thanks for the tips.
HTCSOCAL said:
I also had seen those issues with my HTC HD on WM 6.1.
Another one is clicking an URL in the Email body gives me an error (The parameter is incorrect).
Thanks for the tips.
Click to expand...
Click to collapse
Yeah, I have not been able to click on a URL since my days with an HTC 8525....
Working with Valkyrie 5.2 ROM and BB Enterprise I'm using
Thanks
NO PIN
dineshh said:
PIN is provided by GSM service provider. These step enable the BBC software to accept your handset model as compatible for BB services. Its not a hack for working BB without BB activation. Get the BB services activated from GSM operator and u shall have a PIN also.
Click to expand...
Click to collapse
hi there, i have the same problem of not having a pin on my tp2, my carrier says the pin is on the device here is a copy and paste of my carrier web iste when i tried to activate the service
"To find your PIN perform one of the following actions:
* In the BlackBerry device options or settings, click Status.
* Look for the PIN and IMEI information on the outside of the box that your BlackBerry device or BlackBerry-enabled device came in.
* Turn the BlackBerry device off and remove the battery. Look for the sticker on the BlackBerry device with the PIN information where the battery is usually located."
Nice tutorial, patcat007. On my TP2 with a 6.5 ROM my BB Connect work. Anyway, when I change the AKU to .1.6.3, something happens with graphics in my dialer like in the picture attached. Anyone could help to correct this? Thank's!
NEW IMPROVED CABS : POST 3
A very Special Thanks to tucahara, Schap, Jaap de Wolf, Dridder
Note : For HTC devices only, please read 2nd post -below-for non HTC devices.
- 3G, WLan, GPRS Capable
- GPS Works
- Recent Drivers
- Updated Registry
- All Major Codec compatible[ a-law, u-law, GSM ask provider to enable ]
- Integrated with Phone and address Book
- VOIP and Carrier sellectable on today screen
- SIP Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- Dial Plan Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- NAT Enabled
- Echo Canceller
- For WM6.1 and WM6.5
- Tested and working on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K], Xperia X2
- No sound from earpiece ( Please install cab from previous thread but that is only for HTC devices )
INSTALL ON FRESH OS and PLEASE POST YOUR RESULTS GOOD OR BAD. Thanks
THERE IS NOTHING WRONG WITH THESE CABS, SO PLEASE DO NOT COMPLAIN ABOUT CABS. IF THESE CABS WONT WORK, PLEASE READ DIFFERENT POSTS IN XDA AND FIND OUT WHY. MOST COMMON REASON IS DEVICE OR OS NOT SUPPORTRD MEANING DEVICE DOESNT HAVE FILES NEEDED FOR THESE CABS TO WORK.
These cabs are tested, working with different providers-devices and are not for noobs, if you have come across this before, you will find out, these cabs are the best among them.
Outdated Cabs HERE
For non HTC devices, do the following
- Install one of the cabs post 3 matching your OS.
- Fill all required information in setup voip.
- When you try to save you will get a error
- Close it and Run your GPS program.
- Your GPS with get a lock in few minutes as normal.
- Once you find out your GPS program can see satellites, close it.
- Copy and paste dnsapi.dll into your windows folder
- Restart your device and you will have your gps and voip/sip working
- Make sure to fill information in setupvoip again
New improved cabs
New improved cabs with changed dll. Note : Only for HTC devices. For other non HTC devices, please refer post 2 along with these cabs for optimum results.
Reserved for future2
Reserved for future3
Reserved for future4
Calls hang up immediately after being answered
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
nickdo said:
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
Click to expand...
Click to collapse
Samsung WM6.5 drivers not compatible with dlls. Please look at outdated cabs link above and go to last page for omnia solution. It works fine on my omnia with Wm6.1. I have tried on WM6.5 on Omnia with same results as yours.
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
nickdo said:
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
Click to expand...
Click to collapse
you are right
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
That is not right. I have an Omnia 2 i8000 windows mobile 6.5 and I am able to use voip on my phone.It works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. AutoAudioRoute V2.0
4. Copy paste dll in windows folder.
My PDA is i8000NXXJJ1
jukefox said:
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
Click to expand...
Click to collapse
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
bbuhas said:
that is not right. I have an omnia 2 i8000 windows mobile 6.5 and i am able to use voip on my phone.it works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. Autoaudioroute v2.0
4. Copy paste dll in windows folder.
My pda is i8000nxxjj1
Click to expand...
Click to collapse
----------------------------------------------------------
this is not the integrated solution sir. Thanks for time.
----------------------------------------------------------
dhillonbros said:
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
Click to expand...
Click to collapse
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
jukefox said:
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
Click to expand...
Click to collapse
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
dhillonbros said:
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
Click to expand...
Click to collapse
My phone works great with other not integrated solutions like PortSIP or AGEphone Mobile, so my network is fine. And there should not be a problem with the codecs as well as PortSIP (I don't of the codecs AGEphone uses) uses G711U, G711A and GSM as well (I know of them because theses codecs are configurable over the GUI).
I use AVM FRITZ!Box 7390 as modem / router with its own SIP registrar. That means my Omnia II is configured to use my FRITZ!Box as a SIP server whereas my FIRTZ!Box is connected to my VoIP service provider (the popular German internet provider 1&1) and redirects the VoIP packets to them. It is totally transparent to the SIP client therefore no STUN / ALG (I never heard about ALG before) is used between the SIP client and my FRITZ!Box.
I am not willing to create an account at voipvoip.com because I definitely want to use the phone numbers I got from my ISP but I may provide you credentials for testing purposes to use a phone number from my ISP if you like.
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
jukefox said:
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
Click to expand...
Click to collapse
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
dhillonbros said:
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
Click to expand...
Click to collapse
Hello again,
I already bypassed my router by configuring my pbxes.org account, didn't I? Anyway I now switched my router with integrated telephony services support by an older FRITZ!Box 3130 without telephony services to exclude any conflicts with reserved ports or somewhat else. And you know it: Same result.
Last but not least I tried a connection over 3G by activating that option within the configuration. But I failed already with selecting the service. The search action did not succeed.
I'm running out of ideas. What now? Shall I setup an account for you? I really wanna see whether you are able to reproduce my problem or not.
Thanks a lot.
I am not sure this is the right place for this but I couldn't think where else to post it, so move it if you feel its in the wrong place.
I have cooked various ROMs for my HTC Blackstone and included the VoIP & VoIPOS OEM packages as well as a .CAB file to provision my SIP settings and Schapps SIP Configuration tool to view/change them. Previously this has worked and I can access my BT Broadband Voice SIP service at home and when on other BT Broadband WiFi sites. I don't use it much, however today I tested it and I can no longer make outbound calls, incoming work fine. I captured the traffic using WireShark and when I attempt to make a call I see a SIP/SDP request go out from my phone which gets an immediate reply of 'Status: 100 Trying' followed by a 'Status: 407 Proxy Authentication Required'. This goes unanswered by my Phone and after three tries from the server the call ends.
In previous WireShark captures I can see my Phone reply to the 'Status: 407 Proxy Authentication Required' with another SIP/SDP Request that includes authentication.
I don't think I have changed anything else in the ROM build apart from the Windows Mobile Build (currently 5.2.23152) so I am a bit stuck as to how to fix this?
Any ideas?
Andy
Hmm?
Reflashed with the same ROM and its started working now
I thought it might be the RTCDLL.DLL file that gets installed with Office Communicator Mobile 2007 R2 as this is one application I manually install after a wipe/re-flash as this can't be made into an EXT package. However tried dialing before and after installation and it worked each time. I have the phone back to how it was prior to the re-flash and its still working so I am confused as to what was wrong
Stealth Bad Flash?
LargePrime said:
Stealth Bad Flash?
Click to expand...
Click to collapse
Nope... A week later and its stopped working again. WireShark shows exactly the same behaviour. I am certain if I hard-reset it will start working again. It must be some configuration I have but I can't think what