3G "dead" in Vista but not in WM! Why? - Shift General
Hello to all out there,
it's now two weeks since I got my Shift. I liberated it and using WM is sooo much more pleasant and useful for quick things.
Yesterday I had a problem with the modem inside Vista, meaning I could not get a connection through either IE or Mail. The modem is ON (duh...), WLAN usually also (home & office use), BT and push are off. If I connect through WLAN, everything works flawlessly.
The funny thing is that 3G connections work perfectly through SnapVue/WM and both emails and browsing are perfect.
I'm still new to Vista (still rely on XP, heh... ), so I don't really have the inside knowledge of the OS to know where to look. One thing I've made sure for now is that there is no "3G modem" in the Device Mgr.
Any suggestions before I have to format would be veery welcome! Thanks in advance!
StefanoR said:
Hello to all out there,
it's now two weeks since I got my Shift. I liberated it and using WM is sooo much more pleasant and useful for quick things.
Yesterday I had a problem with the modem inside Vista, meaning I could not get a connection through either IE or Mail. The modem is ON (duh...), WLAN usually also (home & office use), BT and push are off. If I connect through WLAN, everything works flawlessly.
The funny thing is that 3G connections work perfectly through SnapVue/WM and both emails and browsing are perfect.
I'm still new to Vista (still rely on XP, heh... ), so I don't really have the inside knowledge of the OS to know where to look. One thing I've made sure for now is that there is no "3G modem" in the Device Mgr.
Any suggestions before I have to format would be veery welcome! Thanks in advance!
Click to expand...
Click to collapse
ehm.. boh.
prova a reinstallare il control center. non so se incide. quindi non trovi nulla nella lista hardware?
try reinstall shag control.
Some operators (virtual operators, like symio in Spain) are recognized like "roaming" networks. IN that case be sure to enable the correct option on shagCtrl. (Allow to connect on roaming....).
Dani
Tried, but no joy... I am using TIM, so a "main" network.
The funny thing is that this happened overnight, because I used the connection to show a website in Vista to a friend, but yesterday evening I could not connect when I wanted to dl my email.
I absolutely don't have an idea on where to look...
Could someone please have a look into their settings and check if there's a modem hidden somewhere? It may be that the automatic Windows updates did something (the only thing that COULD have done something).
Have you tried to restart vista?. There is a known problem loosing 3g conectiviy sometimes after resuming...
Just did - twice to make sure: nothing.
What I am starting to see now is that there must be some problem in the system, because...
it takes forever for the modem to turn on and off
the fingerprint software does not show up after a resume (after a reboot it does) but works
Also... is it possible that the modem is ON in Vista and OFF in WM??? WTF?
StefanoR said:
Just did - twice to make sure: nothing.
What I am starting to see now is that there must be some problem in the system, because...
it takes forever for the modem to turn on and off
the fingerprint software does not show up after a resume (after a reboot it does) but works
Also... is it possible that the modem is ON in Vista and OFF in WM??? WTF?
Click to expand...
Click to collapse
installa sp1,
if modem is off in wm is off also in vista.
se nonm trovi soluzione formatooone!
in wm side you can surfin web?
After I installed SP1 the marvel driver did not show up in device manager. Only when I klick on WLAN in control center it appears. Has anyone got an idea what has gone wrong there. I uninstalled SP1 again, but same problem. WLAN works fine, but driver vor Marvel only appears when I klick on WLAN.
Of Course, I uninstalled and installed Shagcontrol.
Any possible solution?
Thanks!
S.
Settembrini said:
After I installed SP1 the marvel driver did not show up in device manager. Only when I klick on WLAN in control center it appears. Has anyone got an idea what has gone wrong there. I uninstalled SP1 again, but same problem. WLAN works fine, but driver vor Marvel only appears when I klick on WLAN.
Of Course, I uninstalled and installed Shagcontrol.
Any possible solution?
Thanks!
S.
Click to expand...
Click to collapse
try this link
http://forum.xda-developers.com/showthread.php?t=384482
Your problem goes on when you resume your shift in suspen mode?
I've too..
I resolve this problem.. when this appears, i reset wm side..
Il tuo problema viene fuori quando riparti dalla sospensione?
anche a me succede la stessa cosa.. per ovviare a questo resetto windows mobile da vista.
Oppure prova a disconnettere wm prima di accendere vista..
killer_t said:
Your problem goes on when you resume your shift in suspen mode?
I've too..
I resolve this problem.. when this appears, i reset wm side..
Il tuo problema viene fuori quando riparti dalla sospensione?
anche a me succede la stessa cosa.. per ovviare a questo resetto windows mobile da vista.
Oppure prova a disconnettere wm prima di accendere vista..
Click to expand...
Click to collapse
quello succede anche a me, ma non sempre. prima di mandare in sospensione da shagcontrol disattivo wlan.
quando poi riprendo l'attività riattivo wlan.
this happen to me, i deactivate wlan from shagcontrol before put in sleep mode the shift
Hi all,
a quick update after an evening spent installing SP1... nothing. The modem still can be active in WM and not in Vista, but I can't get a connection.
I will probably spend tomorrow evening formatting everything and start from scratch.
Quick question: does the button in ShagCtrl in Vista hard-reset WM to factory default or is it a soft reset?
Una sera passata a installare il dannato SP1 e non ne sono venuto a capo, il modem continua ad essere attivabile indipendentemente da un lato o dall'altro. La spia 3G lampegga, ma non mi si connette. Domani sera già so cosa mi aspetta...
Domandina: il comando per resettare SnapVue da Vista lo riporta alle condizioni di fabbrica? Se è così, per ora (finché non ci sono news sulla SD) quasi quasi lascio SnapVue com'è.
StefanoR said:
Hi all,
a quick update after an evening spent installing SP1... nothing. The modem still can be active in WM and not in Vista, but I can't get a connection.
I will probably spend tomorrow evening formatting everything and start from scratch.
Quick question: does the button in ShagCtrl in Vista hard-reset WM to factory default or is it a soft reset?
Una sera passata a installare il dannato SP1 e non ne sono venuto a capo, il modem continua ad essere attivabile indipendentemente da un lato o dall'altro. La spia 3G lampegga, ma non mi si connette. Domani sera già so cosa mi aspetta...
no
Domandina: il comando per resettare SnapVue da Vista lo riporta alle condizioni di fabbrica? Se è così, per ora (finché non ci sono news sulla SD) quasi quasi lascio SnapVue com'è.
Click to expand...
Click to collapse
no, non lo riporta alle impostazioni di fabbrica.
no it don't format snapview.
eh mi sa che devi formattare vista.
format vista..
ciao
bye
Maybe I have an idea on what's going on...
Hi all,
more news from my Shift. Last night I had some time left, so I decided to reformat my unit, also because after the update to SP1 Vista wouldn't boot beyond the spinning circle in the startup screen. So Fn + F3 it was...
The process ran well, after about an hour or so I had a perfectly usable Shift in my hands again, so thanks to HTC for making the process straightforward.
To get back to my "no 3G, no party" problem, I noticed that the 3G modem was working again during the initial stages after formatting, but that it was again not accessible after I declared it as a "Public" network in Vista. Of course, my home WLAN is the "Home" network, and this brings up a question...
During the final post-format stages, a "Shared NDIS Internet Connection" driver is found by the system, and in fact, immediately after this driver my 3G modem was back up and running.
What do the settings for "Home", "Office" and "Public" networks do in Vista? Do they create some kind of priority for connecting to one network when it is available? Does this mean that I cannot use (and it would be perfectly OK!) the 3G network while I am in the "Home" or "Office" area?
StefanoR said:
Hi all,
more news from my Shift. Last night I had some time left, so I decided to reformat my unit, also because after the update to SP1 Vista wouldn't boot beyond the spinning circle in the startup screen. So Fn + F3 it was...
The process ran well, after about an hour or so I had a perfectly usable Shift in my hands again, so thanks to HTC for making the process straightforward.
To get back to my "no 3G, no party" problem, I noticed that the 3G modem was working again during the initial stages after formatting, but that it was again not accessible after I declared it as a "Public" network in Vista. Of course, my home WLAN is the "Home" network, and this brings up a question...
During the final post-format stages, a "Shared NDIS Internet Connection" driver is found by the system, and in fact, immediately after this driver my 3G modem was back up and running.
What do the settings for "Home", "Office" and "Public" networks do in Vista? Do they create some kind of priority for connecting to one network when it is available? Does this mean that I cannot use (and it would be perfectly OK!) the 3G network while I am in the "Home" or "Office" area?
Click to expand...
Click to collapse
se metti la rete su home ti condivide tutto, se metti in ufficio non ricordo, ma su publica metti che sei in un bar non ti condivide nulla tranne la connessione wifi o ethernet. è una sorta di protezione. e quidi dato che la connessione 3g costa automaticamente vista la blocca in modo che nessun'altro possa accedervi.
as I am sure you have something intelligent to contribute pitt1983, I suggest you stick to English. This is an international forum.
Thank you and will enjoy reading your replies in the future.
[email protected] said:
as I am sure you have something intelligent to contribute pitt1983, I suggest you stick to English. This is an international forum.
Thank you and will enjoy reading your replies in the future.
Click to expand...
Click to collapse
usually i wrote in english, sorry, i was very tired last night,
i will translate my answer. sorry.
pitt1983 said:
se metti la rete su home ti condivide tutto, se metti in ufficio non ricordo, ma su publica metti che sei in un bar non ti condivide nulla tranne la connessione wifi o ethernet. è una sorta di protezione. e quidi dato che la connessione 3g costa automaticamente vista la blocca in modo che nessun'altro possa accedervi.
Click to expand...
Click to collapse
if you put lan on home you can share all your folders and files in your or others lan, if you put office don't remember, if you put on public vista apply a kind of protection and don't share nothing.
i think that 3g connection is blocked with the lan menu on public because the costs of connection are high and personal.
New update
Hi all,
after having reset my Shift last weekend and re-installing the programs I use, my 3G connection now works, though intermittently. In order for Vista to see the 3G modem I need to reset SnapVue and wait for a few minutes.
Then the "bong" for the new driver comes, and I can connect.
I still need some time to play with the options, but this may be getting me somewhere...!
had the same problem
StefanoR said:
Hi all,
after having reset my Shift last weekend and re-installing the programs I use, my 3G connection now works, though intermittently. In order for Vista to see the 3G modem I need to reset SnapVue and wait for a few minutes.
Then the "bong" for the new driver comes, and I can connect.
I still need some time to play with the options, but this may be getting me somewhere...!
Click to expand...
Click to collapse
hello all..first like to say that you all so much for digging into the shift to fully liberate the unit so its free..thinking of the film one flew over the cockoos nest now when the indian chappie smashed through the window..anywho back to this tale of woh..ive had the problem myself..but it was on and off..the conclusion i arrived at was it was down to signal strengh or location and even network supplier..
first mine worked fine..then at work it would never connect on fista side..oops mean vista http://forum.xda-developers.com/images/icons/icon10.gif Talk always get those 2 mixed up..anywho part 2 ..it was fine when i got home..signal strengh while i was at work wasnt great..but it still connected in wm side..ive just recently tried different card..again wm side fine..fista not most times..
i suggest to you that you have a wonder..see some old friends..take you shift with you and see what happens..
hope you get it sorted out..at the moment mine will connect..for the moment http://forum.xda-developers.com/images/icons/icon12.gif
Wink
Related
[MOD-ROM][ITA][WWE][Jun 11 09]TiR v 15 RH + PDM 5.0.1
T.i.R. v15 RH WWE/ITA + PDM 5.0.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version: 15 RH WWE / ITA
Language: WWE / ITA
Creator: Maja
Release date: june 11 2009
We are pleased to publish the first upgrade for our new device: the RHODIUM.
This is an executable that will customize the original ROM of your device to change it in a T.i.R.
It isn't a complete because it is not yet released the Hard SPL and some changes are not possible to do.
I added a video that explains the installation procedure. Just in few words run the executable and install all the various suggested cab,you don't have to restart the device untile the end of the procedure, then will restar automatically.
Suggested a Hard Reset before!
if the white bar appears at startup because I have found the solution
wwe version go to windows / startup canceled the file ppcinstaller.ink found.
=============================================================
Siamo lieti di pubblicare la prima modifica per il nostro nuovo dispositivo, il RHODIUM.
Si tratta di un'eseguibile che andrà a personalizzare la ROM originale del vostro dispositivo in modo da renderla una T.i.R.
anche se non in modo completo visto che non è ancora uscito l'Hard SPL e alcune modifiche non si possono ancora fare.
Ho aggiunto un video che spiega la procedura di installazione, in poche parole basta che lanciate l'eseguibile e installiate tutti i vari cab suggeriti, non riavviate mai il dispositivo fino alla fine della procedura, poi si riavvierà automaticamente.
Consigliato un Hard Reset prima dell'installazione!
se vi compaiono la barra bianca all'avvio ho trovato il perche'
versione wwe andate in windows/startup cancellate il file ppcinstaller che trovate.
versione ita andate il windows/esecuzione automatica e cancellate il file ppcinstaller.
VIDEO:
T i R v15 RH
TECHNICAL DETAILS:
Tweak Registri.
Estensione Fileexplorer.
HTC FM RADIO.
NetCF 3.5.
PDM 5.0.1
Mod per percentuale batteria.
Mod per implementazione funzioni su posta.
Nuova Grafica.
Download WWE version: TiR15RH-WWE.exe
PDF guide for the PDM: PDM Eng.pdf
Download versione ITA: TiR15RH.exe
Guida in PDF sul funzionamento del PDM: PDM Ita.pdf
SCREENSHOT
Dear luigino99, I try to download, but it show "This file is currently set to private. If this problem persists or you need further assistance, contact support." so how can I download it or do you have other mirror link? Many many thanks.
Same problem here, Would like to try it but dont want the ita version which seems to be the only available one.
Mirrors Thanks Luigino Great work Grazie Luigino Ottimo lavoro Mirrors Here TiR15RH-WWE.exe TiR15RH.exe
ok got it installed, Works good so far, I am pleased to say the least. I opted out of the clock which I had to do a new hard reset to do. But still like it!!! Took alittle while for the settings to get back to normal so for any USA users dont freak out when you dont get a signal, just go in and set it all up manually and then wait it will configure itself. I still have to play around with it some more only had it installed right for about an hour. DO THE HARD RESET! fair warning, and I did have to use the fix to get rid of the white. QUESTION??? Is it User Customizable???? Dont want another hard reset if I can avoid it
Much better ... now the Rom it's a PDM UC .. UC has a defect (at least in my opinion) works only once after which you must work on the reg going to do it again. PDM, however, with the "CAB Managements" allows you to use the UC every time you want (this feature has been designed with ERVIUS). Secondly, the pdm is a sort of pimbackup.
Amazed, I may just be out of the loop, But I used T.I.R back on the tytn II when I first got one and used it alot, in fact I still flash that to every single phone someone brings into my store for a new rom (on the ttyn II) And I just keep using the one I downloaded way back when I had mine. Now I have been flashing all kinds on the fuse, just to give people a different experience, and so everyone in my little town doesnt have the same phone (they can feel unique). But more to the point. Awesome interface on PMD and I mean Fantastic. Dont know when this change occurred or who did it but BRAVO You rock!!!! and if you are like me and haven't tried a T.I.R. in a while. Take the time, Do a hard reset and put this on your phone!!!! It is great to have this easily downloaded content streamed right into your phone, categorized beautifully and useful beyond anything else for the TP2 right now (not to say anything bad about all the others working diligently everything is appreciated) I wish I had more money to be able to help out more or the ability to cook or write programs. Im sure I could if someone showed me how but everyones so busy. Gonna send you what I can right now though it might not be much but Thanks for the great update.
Justin241982 said: Amazed, I may just be out of the loop, But I used T.I.R back on the tytn II when I first got one and used it alot, in fact I still flash that to every single phone someone brings into my store for a new rom (on the ttyn II) And I just keep using the one I downloaded way back when I had mine. Now I have been flashing all kinds on the fuse, just to give people a different experience, and so everyone in my little town doesnt have the same phone (they can feel unique). But more to the point. Awesome interface on PMD and I mean Fantastic. Dont know when this change occurred or who did it but BRAVO You rock!!!! and if you are like me and haven't tried a T.I.R. in a while. Take the time, Do a hard reset and put this on your phone!!!! It is great to have this easily downloaded content streamed right into your phone, categorized beautifully and useful beyond anything else for the TP2 right now (not to say anything bad about all the others working diligently everything is appreciated) I wish I had more money to be able to help out more or the ability to cook or write programs. Im sure I could if someone showed me how but everyones so busy. Gonna send you what I can right now though it might not be much but Thanks for the great update. Click to expand... Click to collapse Thank's for your support
hmm the pdm doesnt work on my device the shortcut is on the start menu, but it appears to be a broken shortcut it's not in the all programs list either
did you hard reset first? there are lots of issues if you do not preform one first. Also I had to open both pmd and app to date once then close them do a soft reset then they work all the time, almost like its setting itself in the phone before use. hope this helps alittle.
great job
info Hi MaJa how are you and the rest of the Team? First I apologize to the Mods if this isn't a correct post... I'm sorry but I am new in this forum and I would't open a new post for this problem ehm Maja I'have a problem with your "Tir wwe-ita.cab" I explain... I had HR my device (rhodium) then I have to install your cabs... problem is this: tir wwe-ita.cab doesn't install on my device why??? I haven't made your TIR 15 Rh thanks for th answer
my friends good job my friends.
Fabri181818 said: Hi MaJa how are you and the rest of the Team? First I apologize to the Mods if this isn't a correct post... I'm sorry but I am new in this forum and I would't open a new post for this problem ehm Maja I'have a problem with your "Tir wwe-ita.cab" I explain... I had HR my device (rhodium) then I have to install your cabs... problem is this: tir wwe-ita.cab doesn't install on my device why??? I haven't made your TIR 15 Rh thanks for th answer Click to expand... Click to collapse Probably you made something that disturbs. I tried it now and it works!! -------------------- Probabilmente ha messo qualche cosa che disturba...l'ho provato personalmente ora, ed è andato a buon fine!!
Another Great Job form the team T.I.R. Thank you guys! I installed the cabs, since the initial release and, until now, everything went smoot, no issues during installation and normal working contitions. I just keep the mania to turn the device off during the nightime to charge and doing so, no SR were normally necessary during all day long. I installed the mod in a non-HR device (already full of stupid and un-necessary things that I love install on every device, like weather forecasts, PIM utils, games, etc).
maja said: Probably you made something that disturbs. I tried it now and it works!! -------------------- Probabilmente ha messo qualche cosa che disturba...l'ho provato personalmente ora, ed è andato a buon fine!! Click to expand... Click to collapse I don't know, because it was my first installation after HR - ok this evening I try again Thanks non lo so, perchè è stata la mia prima installazione dopo Hr, stasera proverò ancora grazie
Hi, Thanks for this mod/rom. I really like it. I could help you translate it into dutch if you like. just let me know
erkel said: Hi, Thanks for this mod/rom. I really like it. I could help you translate it into dutch if you like. just let me know Click to expand... Click to collapse A rom / mod can bring changes to the language only partial ... But for what... I can ,this weekend, try to produce the Dutch version!
Fabri181818 said: I don't know, because it was my first installation after HR - ok this evening I try again Thanks non lo so, perchè è stata la mia prima installazione dopo Hr, stasera proverò ancora grazie Click to expand... Click to collapse Ref Tir wwe-ita.cab It works I have another question... I would like to try the TIR 15 Rh but I don't like the clock white... Can I change it or not? If yes how? Ho un'altra domanda, vorrei provare la TIR 15 Rh ma non mi piace (non tanto tanto proprio ) l'orologio bianco, Posso cambiarlo? come???
Fabri181818 said: Ref Tir wwe-ita.cab It works I have another question... I would like to try the TIR 15 Rh but I don't like the clock white... Can I change it or not? If yes how? Ho un'altra domanda, vorrei provare la TIR 15 Rh ma non mi piace (non tanto tanto proprio ) l'orologio bianco, Posso cambiarlo? come??? Click to expand... Click to collapse Yes,you can... when the procedure arrive to clock , you can cancell only the cab installation. ---------- Si puoi, quando la procedura arriva all'orologio, tu puoi abbortire l'installazione solo del cab interessato
[Q] Acer a500
Ciao a tutti e complimenti per tutto Ho un problema ho installato rom ics flexreaper r9 final e dopo ho installato da questo link http://forum.xda-developers.com/showthread.php?t=1538484 questo apk Il mio tablet non si accende piu' e vibra help Grazie
i don't understend what you said but sound like my problem. hope this help: http://forum.xda-developers.com/showthread.php?p=23584356#post23584356
aiuto cpuid wrong come devo fare?
acme1974 said: Logo acer non c'è. Più e nn si avvia viber only Sent from my HTC HD2 using XDA App Click to expand... Click to collapse Yes, I tried install this 3G apk and my device go black screen, vibra and don't boot anything.
Help nn riesco aiuto Sent from my HTC HD2 using XDA App
I had the same problem. Black screen continuous vibration my pad total bricked. Solution is to place Acer 500 in download mode and to flash it again with 3.01 there in development section proper links to do that it is necessary to have your UID. MY tablet is on again but it was a scary experience!!!!!!!
my dear friend i do not speak Italian so i write you in English i had the same problem i solve it , the only thihg that you MUST have is UID of your device (without it nothing is going to work). if you have it go http://forum.xda-developers.com/showthread.php?t=1276227 and follow method 1 after you downloading the zip from step 1 extract it in a folder on your desk top open and run DoNetDetecter.exe follow the instructions when it try to recognize your devise wait 2-3 minutes and then a pop-up menu advice you how to set your device in download mod folow this after install the drivers in your computer press next and it is asks to input the UID of your device (without it nothing is going to work) , press next and wait 5-10 minutes maximum to flash the rom after that reboot and you can root it install clockwork recovery and restore your last backup after a full wipe. that is it . For more information look here http://forum.xda-developers.com/showpost.php?p=23584356&postcount=39 That was the way i turn back on my Acer Iconia may be other way but i dont know
GPS showing me in the wrong place
Hello, lately i have been having some trouble with my phone, the GPS sometimes gives me some huge localization errors. I'm running stock rom with stock configuration. Has anyone encountered the same problem? Can someone help me? Thank you. L.E: the phone is not and has never been rooted, it runs on the official stock rom.
Well, try another ROM then. Also try flashing compatible radio.
Try to use this solution.
pavlo_js said: Try to use this solution. Click to expand... Click to collapse you do realize that this is a phone that runs on windows mobile, do you?
teh_1 said: you do realize that this is a phone that runs on windows mobile, do you? Click to expand... Click to collapse Probably not... Vorbi si nea Ion... Pe ce aplicatie iti da erorile alea de pozitie?
teh_1 said: you do realize that this is a phone that runs on windows mobile, do you? Click to expand... Click to collapse Sorry for confusion. I was sure it is posted in Android General
bib*oops said: Probably not... Vorbi si nea Ion... Pe ce aplicatie iti da erorile alea de pozitie? Click to expand... Click to collapse Nu e o problema specifica unei singure aplicatii, am observat ca de obicei ma pozitioneaza eronat timp de cateva minute dupa care revine. Problema e ca daca folosesc un program (gps tracker, foursquare, facebook, aplicatii de sfa cu inregistrare a locatiei, etc) care trebuie sa imi inregistreze locatia in momentul acela, o va lua in considerare pe cea eronata.
Sunnto 7 and Huawei Problem account google copy
Hay I have a problem. My Smartphone is Mate 30 Pro and Smartwatch Sunnto 7 I have GSM services installed with this method https://www.youtube.com/watch?v=4HfWs3kfCPI&feature=emb_title Wear Os app starts normally without errors etc. and connects normally to the smartwatch. The problem is when the watch needs to copy the google account from the phone to the watch. Then it appears: Could not copy accounts. Check that the phone has a network connection and is connected to the watch. Maybe someone know how to solve it ??? Please Help:crying: Regards
Exactly same issue there.
BartRose said: Hay I have a problem. My Smartphone is Mate 30 Pro and Smartwatch Sunnto 7 I have GSM services installed with this method https://www.youtube.com/watch?v=4HfWs3kfCPI&feature=emb_title Wear Os app starts normally without errors etc. and connects normally to the smartwatch. The problem is when the watch needs to copy the google account from the phone to the watch. Then it appears: Could not copy accounts. Check that the phone has a network connection and is connected to the watch. Maybe someone know how to solve it ??? Please Help:crying: Regards Click to expand... Click to collapse Same problem here. I have p40pro plus and tic watch pro 3 and have same issue. hoping for a fix
cambofuk said: Same problem here. I have p40pro plus and tic watch pro 3 and have same issue. hoping for a fix Click to expand... Click to collapse Just wondering if anyone has found a fix for this yet???
I have a Casio WSD-F20, swap from Pixel 3 to Pixel 5 last week. Did a factory reset on the watch to clean reinstall everything and sync Wear OS with he new phone but it doesn't work. It hangs at the transferring data from both devices and then can't continue but on the watch it says continue setup on your phone. Tried everything, reset the watch again to factory. Cleared data WearOS, uninstall WearOS, rebooted many times both devices, factory reset the watch tried to sync it back with the Pixel 3, it doesn't pass the same screen every time the progress bar stops at the same place. Before redoing the sync from a fresh install of the app WearOs on the phone, I added all permissions. Confirmed bluetooth is on device are in both hands so not too near and not too far... Tried the recovery mode from here but it only displays a ! when selecting Factory reset. https://casiosupport.zendesk.com/hc/en-us/articles/360000320491-How-to-Hard-reset-WSD-F20-#:~:text=Press%20power%20button%20to%20go,the%20menu%20of%20recovery%20mode. Anyone knows the secret trick to sync my watch to my new phone please??!!
Ciao ho lo stesso con un casio wsd f20a, dopo che esce il punto esclamativo tieni premuto il tasto centrale piu quello superiore dopo di che lasci prima quello superiore e vedrai che va nel menu segreto. puoi fare un hard reset ma non servira a niente. se si riuscisse a fare un aggiornamento del firmware forse si risolvebbe. Se qualcuno ha risolto mi farebbe piacere come fare
HELP USB Not reading TS10 6GB 128GB
Hello, Can anyone help me to get my Head unit to read flash drives? I have Tried 63, 32 and 8Gb flash drives formatted FAT32 but none of them are being read by the system. I need to transfer music from the flash to the head unit. but the head unit is not reading any flash from any of the two USb ports. The system is a KUNfine head Unit usms512_1h10_Natv Android version 12
What does the seller suggest when contacted for support, does that work?
See if the usb debug option is enabled in the developer settings and disable it.
Oh well Thank you guys for your responses. I did contact the Seller/Manufacturer initially for a user manual. which he sent that turned out to be generic at most. and doesn't get into that kind of detail. I eventually was able to locate the password to access the developer option and I enabled it. so will go do the reverse and see. if that works. Thank you guys again for your response
Bumpstrous1 said: Oh bene Grazie ragazzi per le vostre risposte. Inizialmente ho contattato il venditore/produttore per un manuale utente. che ha inviato che si è rivelato al massimo generico. e non entra in quel tipo di dettaglio. Alla fine sono riuscito a individuare la password per accedere all'opzione sviluppatore e l'ho abilitata. quindi andrò a fare il contrario e vedere. se funziona. Grazie ancora ragazzi per la vostra risposta Click to expand... Click to collapse Have you resolved problem with usb? i have a ts10 unit and have similar problem. after reset data my usb port not recognize a pendrive but current pèower work. have a solution?
No I gave up to move tracks to my head unit I upload to the cloud then download to the head unit using wifi. I realize something may be damaged In the USB since I recall the flash drive was warm and when I placed it in the laptop it did a whole scan again. So my workaround was laptop to cloud cloud to head unit. I refuse to get grey hairs over technology.