Related
Let's start a thread of all the reg tweaks ppl have come up with. If they are saved as .reg files (to an SD), we can install them with a mere double-click by using TRE (options>associate), and anyone can contribute to this post WITHOUT having to build .cab files! Why is this kewl; cos when u hard reset it's a real ball-ache to go back into all the forums to find the tweaks u applied and to navigate thro TRE to re-apply them all. This applies particuarly to settings (Owner info etc). Over and above, we are no longer beholden to tweak shareware, but have full and instant control over our settings.
Each tweak should have 2 reg files; Apply the tweak, and remove the tweak (if possible). In this manner, we can have a directory of reg files, and can turn on and off tweaks with a simple d.click.
Attached is a basic set I've compiled. Please let everyone know if any are a problem (ie perhaps whole key gets replaced and overrides something u have already changed). Files described below:
[*]Reg Date_In_Titlebar ON.reg
Adds the date to the title bar, with format according to your short-date format under settiings>regional (or found manually changed in another Tweak I'll cover later). I do NOT have a .reg file that will undo (ie delete) this new key, but it's easy to see what key is being added so u can delete it. <Credit: Well known PPC tweak - I probably learnt from toenailed>
Can someone please find out where we can change the font for this - it's a horrible bold font that doesn't fit in the space available?
[*]Reg Font_Menu_+_Pop_700 ON.reg
Change menus and popups to a smaller font. Nice size, makes VGA look more VGA-like, yet not so small that it fails cleartype nor looks daft. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_Menu_+_Pop_900 DEFAULT.reg
Reset above change to default of 900
[*]Reg Font_System_700 ON.reg
Changes system font to 2 pts smaller. I find that dialog boxes with radio buttons got a bit wierd, and you don;t get much more screen estate height cos of icon sizes staying the same in file lists, so I don't bother with this tweak. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_System_900 DEFAULT.reg
Turn above off
[*]Reg GPRS_+_3G_Always _On DEFAULT.reg
Awesome tweak to make sure ur phone connects to GPRS/3G and stays there. However, you'll want to switch this off overnight etc, which is the main reason I created this post and these reg files. NOTE: you will absolutely HAVE to replace the "MTN SA Web" bit with the name of your connection which you will find in this key using TRE
<Credit: BrettS http://forum.xda-developers.com/viewtopic.php?t=30277>
[*]Reg GPRS_+_3G_Always _On ON.reg
Turn off the above. Remember to change connection name in file
[*]Reg PIE_Homepage_Default.reg
When u press the E (explorer) keyboard key u go to clubimate homepage - annoying. This resets that hard button to whatever u want (current reg file is windows\default.htm)
<Credit: I forget, someone on clubimate forums>
[*]Reg TerminalServices_Cache_Larger DEFAULT.reg
AWESOME improvement in Terminal Services client horrible black blocks. Increases cache sizez - I did not notice an increase in traffic/cost
<Credit: Carnivor from MS KB http://forum.xda-developers.com/viewtopic.php?t=29996>
[*]Reg TerminalServices_Cache_Larger ON.reg
Turns above off
More coming as I go thro the wiki and toenailed tweak posts and extract usefull ones for us lonely Universal users...
can you add the actual keys to here?
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
cos of this thread
http://forum.xda-developers.com/viewtopic.php?t=30396
Doh! That post came up after I started this thread.
Still this thread is useful for the actual .reg files to same n00bies some time (and to save me time too). I'll make sure everything here is duplicated there tho.
Here are a few more .reg files:
Several versions of date_in_title_bar (covered above)
Hide_Screen_Rotation icon
Hide that icon that allows u to rotate screen - but JJ does it automatically so Icon is not so necessary
Regional_settings
These are for me - u should edit file in text editor to customise 4 yourself. Best part is my short date format that keeps date in title bar small and visible
Ringtone_settings
Customise as above
Screen_Speed_Glyph_Cache
Double your screen cache. COsts a LITTLE memory, and improves screen size
Screen_font_'smaller'
Set screen font size to "smaller". This can be changed in "settings"m and I only include it here in line with my suggestion that we have a collection of files to run quickly on reset. You may want to customise as above
SIP_Settings. Ditto
All in updated zip file.
I would really appreciate if anyone can find a way to get rid of the Last Call in the dialer screen... I know its somewhere hidden in Registry, but I dont seems to be finding a way to get tru it...
Having the Last Dialed No. showing rite up on the Dialer Screen is really bothering and if you happened to press the phone button by mistake twice there we go the last dialed no. has been dialed already for you....
Bump: no-one contributing to this learning?
haven't found anything else worth posting yet m8, u got the best ones already :wink:
craigiecraigie4: Thanks for these - great idea!
I have a suggestion:
HKCU/ControlPanel/Backlight sets the backlight duration for the keyboard (in seconds). It's available through the control panel, but I like it set to more than the CP maximum of 10 seconds. Sorry - I don't know how to create a reg file.
To reset, choose another value in the backlight control panel applet.
Don't have any others to add though
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
This one is in this forum:
from davidberrysmith
--------------------------------------------------------------------------------
Any body remember these reg tweaks from himalaya? they still work
*** Speed Up Your Windows Mobile Pocket PC.
1. Open your registry editor o_n your Pocket PC
2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
3. Change the value of 'limit' from 8192 to 32768
4. Close registry editor and soft reset.
*** disable start menu animation
Browse to HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\
Change the "AniType" value from 6 to 0.
_________________
i-mate jasjar
Click to expand...
Click to collapse
SiliconS said:
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
Click to expand...
Click to collapse
Nice one dude. I can't make the .reg file cos I can only create reg files of the entire key, and there are too many other things under GWE that users may have changed.
Internet Explorer
Somewhere in those forums I found the IE reg hack to make mine 5.5, this helps connecting to my bank account and viewing other secured sites.
read this somewhere
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
says receive so i dont know about send, try it!! might be it
But apparently now this is the same feature as the receive incoming beams setting in connections.
Yes, I know that's not free but 90% of all this hacks have been included in Tweaks2K2. And the other 10% are about to be included :twisted:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
craigiecraigie4 said:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
Click to expand...
Click to collapse
With your .reg files as inspiration I'm just about getting there in the same way. I've written down all the steps and I just run through them. I've done this since I had my XDA2 and it makes a hard reset so much less traumatic:
Code:
Hard reset. Wait for Today screen then soft reset.
Connect cable to ActiveSync. Set up guest connection.
Turn off beams, error reporting
Set basic clock accuracy
Copy Step 1 files to root of PPC [These are the CABs for the programs I install]
Run CABs. Leave O2 Connections CAB. Put gps.CAB and PIMAddin onto storage card
Run TRE registry editor. Associate .reg files to TRE
Open the .reg file [This applies my registry settings. See below]
Run O2 connections CAB
Copy all Step 2 files to root of PPC [This adds shortcuts to StorageCard-installed programs to my Start Menu and gives me my freeware email client and PZP icons and profiles]
Run SDK Certs CAB
Run OzVGA. Change all fonts to same size as qVGA
PPC: edit registry: browse to HKLM\ControlPanel\GPS Settings. Delete the DWORD marked "hide"
CPL > Personal > Buttons: match Button 2 to [Task switcher], Button 4 to <Rotate Screen>; Set button lock
CPL > Personal > Menus: ActiveSync, File Explorer, Internet Explorer, nPOPw, Pocket Informant, Task Manager, TomTom Navigator
CPL > Personal > Owner: set owner information
CPL > Personal > Phone: change band to GSM
CPL > Personal > Today: set items to Date, PZP, PocketPlus, PocketBreeze, Messaging; set theme to Windows Default
CPL > System > Clock: Show time on all screens
CPL > System > Regional: Set locale to UK
CPL > Connections > GPS: set program port COM0
Soft reset
Set password for PPC
PC: backup previously sync'ed files folder
PC ActiveSync: delete previous partnership. Don't delete sync'ed files folder
CPL > System > About: Set DeviceID = XDAExec
Connect PPC and PC with cable
Sync only Contacts, Calendar (all), Tasks, Favourites
Sync files. Replace the items on the device
PocketBreeze: import settings
PocketPlus: import settings
PocketInformant: run and let it fanny about
PocketWeather (on PocketBreeze tab): import settings
Run ListPro. Enter registration code
Disconnect from PC
Set up phone speed dials
Set up voicedial tags
Set up ActiveSync via Bluetooth to Workstation
Set up bond to headset
Set up bond to GPS thingy. Choose Serial Port as profile
Start TomTom Navigator. Run through startup.
InternetExplorer: sort out view settings. Set default page to about:blank
Choose Transcriber input method. Import settings file
This is my .reg file that does almost everything I need done in one step:
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings]
"Group"=dword:00000002
[HKEY_CURRENT_USER\ControlPanel\Backlight]
"QKeyLedTimeout"=dword:0000001e
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client]
"Keyboard Layout"="00000409"
"BitmapPersistCacheSize"=dword:00000001
"BitmapCacheSize"=dword:00000015
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00004000
[HKEY_LOCAL_MACHINE\nls\overrides]
"SSDte"="d/M "
[HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD]
"PieHomePage"="about:blank"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=hex:\
13,00,00,00
It makes a massive difference using commercial software that has a reliable import/export process for the settings and this, IMHO, is usually the biggest difference between paid-for software and freeware alternatives.
Silicon, don't u want to re-post your post here:
http://forum.xda-developers.com/viewtopic.php?t=31697
We need more of these 'standard' configs to help new users get up n running without giving up on their universal.
dude, your screen - how?
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Re: dude, your screen - how?
simon_darley said:
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Click to expand...
Click to collapse
You don't want merc!! well u can just f off then! ;-)
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Re: dude, your screen - how?
craigiecraigie4 said:
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Click to expand...
Click to collapse
Whatever it is, it's distracting to have such a big picture in your signature in such text-based forums.
Sorry craigiecraigie4. Don't mean to offend. Just MHO.
OK I was working in the customization of the HTCHomeplug.
What is HTCHomeplug? If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin that shows some icons like Battery, Rotation, Comm Manager, Screen Light, Quick GPS and TVOut. What I discovered is who to deal with this plugin in order to change the icons and applications associated there.
I used PHM Registry to edit entries at the PPC registry, but you can use the editor of your like.
First is access using the registry editor to this entry:
/HKEY_LOCAL_MACHINE/SOFTWARE/HTC/HTCHomeplug
There is the configuration of the plugin. There we will find two entries pointing to the first two icons (Battery and Rotation) that seems to be configured in a different way that the rest of the icons. Those are the two DWORD entries:
PowerIconSlot with value of 0 (this means the first position in the plugin)
RotateIconSlot with value of 1 (this means the second position)
The rest of the positions in the HTCHomeplug appears like KEY entries with names from 2 to 5 meaning positions 3 to 6 in the plugin bar.
Inside each key (2 to 5) we find 3 values (or entries):
1- iconindex DWORD type of Decimal which contains 103 in the case of entry KEY 2
2- LaunchApPath STRING contains the path to the executable file associated to the icon
3- ResPath STRING contais the path to the resource file which contais the icon image poited by iconindex entry. This path points to a DLL or EXE file containing the icon image.
So... since we want to add a icon/application we need to create the entry KEY 6 and we must create both STRING entries and DWORD one inside the KEY 6.
To add Tomtom Navigator in the HTCHomeplug (as an example) I added:
iconindex = 101
LaunchApPath = \Program files\Navigator\Tomtom Navigator.exe
ResPath = \Program files\Navigator\Tomtom Navigator.exe
So I'm using the icon storaged in the Tomtom Navigator executable file itself and my Tomtom is in the path I show in the entry. Off course this could not match your installation.
How I found the iconindex information that points to the icon in the Tomtom's EXE file??? Easy I used a program called RViewer (for PPC) develop by Vicott Wong. The program can by found in Google or in the web page shown in the About screen.... http://mobile-sg.com
Running that program and browsing the EXE file (or a DLL) we can see the index for each resource and if it's an image the image is display in the screen, so I found the 101 is the index for the Tomtom icon inside de EXE file.
Once the entries in the Registry are done the rest is easy. Just go into Start - Configuration - Personal - Today and int the Elements Tab. There unmark the HTCHomeplug and exit the configuration going into the Today screen to check that the plugin is not in the screen. Then we back to the Today configuration and select again the HTCHomeplug to mark it. Once we are back into the Today screen we will see the new icon.
(OK in the previous paragraph I'm translating the menu options and clicks from my spanish release of WM5 into english one so the names could not match... what you need to do is configure Today screen to remove the plugin and to configure again to insert the plugin, that way the plugin is reseted and the new icons loaded).
I did several tests and looks like the HTCHomeplug only supports 7 icons (0 to 6) but since many of the original icons are not use on daily bases we can setup up to 5 programs in that plugin leaving the Battery and Rotary icons in its place.
I hope this is useful... and I beg your pardon for my poor english.
Regards,
mahjong
P.S.: I posted this first at todopocketpc.com in spanish. If you know that language maybe you prefer read it in my mother language. For sure will be much better written.
mahjong said:
OK I was working in the customization of the HTCHomeplug.
What is HTCHomeplug? If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin that shows some icons like Battery, Rotation, Comm Manager, Screen Light, Quick GPS and TVOut. What I discovered is who to deal with this plugin in order to change the icons and applications associated there.
I used PHM Registry to edit entries at the PPC registry, but you can use the editor of your like.
First is access using the registry editor to this entry:
/HKEY_LOCAL_MACHINE/SOFTWARE/HTC/HTCHomeplug
There is the configuration of the plugin. There we will find two entries pointing to the first two icons (Battery and Rotation) that seems to be configured in a different way that the rest of the icons. Those are the two DWORD entries:
PowerIconSlot with value of 0 (this means the first position in the plugin)
RotateIconSlot with value of 1 (this means the second position)
The rest of the positions in the HTCHomeplug appears like KEY entries with names from 2 to 5 meaning positions 3 to 6 in the plugin bar.
Inside each key (2 to 5) we find 3 values (or entries):
1- iconindex DWORD type of Decimal which contains 103 in the case of entry KEY 2
2- LaunchApPath STRING contains the path to the executable file associated to the icon
3- ResPath STRING contais the path to the resource file which contais the icon image poited by iconindex entry. This path points to a DLL or EXE file containing the icon image.
So... since we want to add a icon/application we need to create the entry KEY 6 and we must create both STRING entries and DWORD one inside the KEY 6.
To add Tomtom Navigator in the HTCHomeplug (as an example) I added:
iconindex = 101
LaunchApPath = \Program files\Navigator\Tomtom Navigator.exe
ResPath = \Program files\Navigator\Tomtom Navigator.exe
So I'm using the icon storaged in the Tomtom Navigator executable file itself and my Tomtom is in the path I show in the entry. Off course this could not match your installation.
How I found the iconindex information that points to the icon in the Tomtom's EXE file??? Easy I used a program called RViewer (for PPC) develop by Vicott Wong. The program can by found in Google or in the web page shown in the About screen.... http://mobile-sg.com
Running that program and browsing the EXE file (or a DLL) we can see the index for each resource and if it's an image the image is display in the screen, so I found the 101 is the index for the Tomtom icon inside de EXE file.
Once the entries in the Registry are done the rest is easy. Just go into Start - Configuration - Personal - Today and int the Elements Tab. There unmark the HTCHomeplug and exit the configuration going into the Today screen to check that the plugin is not in the screen. Then we back to the Today configuration and select again the HTCHomeplug to mark it. Once we are back into the Today screen we will see the new icon.
(OK in the previous paragraph I'm translating the menu options and clicks from my spanish release of WM5 into english one so the names could not match... what you need to do is configure Today screen to remove the plugin and to configure again to insert the plugin, that way the plugin is reseted and the new icons loaded).
I did several tests and looks like the HTCHomeplug only supports 7 icons (0 to 6) but since many of the original icons are not use on daily bases we can setup up to 5 programs in that plugin leaving the Battery and Rotary icons in its place.
I hope this is useful... and I beg your pardon for my poor english.
Regards,
mahjong
P.S.: I posted this first at todopocketpc.com in spanish. If you know that language maybe you prefer read it in my mother language. For sure will be much better written.
Click to expand...
Click to collapse
Excellent post and thanks for your efforts and sharing! I'll be trying this out later. Just what I was looking for.
I'll report my experiences later.
Excellent! I will try this!
When using TrueVGA, does anybody know a way of making the icons work? I see only 1/4th of an icon, and it's even the wrong icon. The only icon is the one for the Light Settings...
Anybody know the iconindex for Opera so i can have the Opera icon instead of Web&Walk icon!
Mahjong tells you how to find it...
mahjong said:
How I found the iconindex information that points to the icon in the Tomtom's EXE file??? Easy I used a program called RViewer (for PPC) develop by Vicott Wong. The program can by found in Google or in the web page shown in the About screen.... http://mobile-sg.com
Click to expand...
Click to collapse
No Joy I'm afraid...
I'm afraid that it hasn't worked for me on the Ameo. Maybe it's due to how T-Mob have configured/altered things with their customisation of their ROM.
I reverted to using the TrayApplet in the same regedit folder that the HTCHompeplug resides in, but to no avail.
Quote "Just go into Start - Configuration - Personal - Today and int the Elements Tab. There unmark the HTCHomeplug and exit the configuration going into the Today screen to check that the plugin is not in the screen. Then we back to the Today configuration and select again the HTCHomeplug to mark it. Once we are back into the Today screen we will see the new icon.
(OK in the previous paragraph I'm translating the menu options and clicks from my spanish release of WM5 into english one so the names could not match... what you need to do is configure Today screen to remove the plugin and to configure again to insert the plugin, that way the plugin is reseted and the new icons loaded). " End Quote.
No HTC Plugin on the Ameo Today settings menu either, but visible in HLKM...software etc...as the HTCHomeplug.
I can get some of my choice of programs in the TrayApplet, but not the associated icons!!??!!
Same as before when I tried. Anyone else with an Ameo who has had success in getting it to work with the right icons?
Hi,
Thanks for the tip, it's really useful! I wanted to customize the plugin but didn't have the patience to go through all the registry.
Twp questions though:
- I made a shortcut for the calculator (calc.exe) but the icon is too big (both res. index 0 or 100 in calc.exe). Is there a way to scale it down, or a smaller calculator icon in another file? What's the "main" icon library for Windows Mobile (the equivalent of shell32.dll under Windows)
- I tried to make a shortcut to the phone application, but I can't find the exe file (the Start menu shortcut doesn't point to an exe file, but to :MSCProg?......). And I can't find the icon either...
Please help.
Regards,
Silviu
Hi silviu.h.
Which Athena device do you have, Advantage, Dopod or Ameo?
Hi, I have the HTC Advantage (not Ameo, not Dopod), and the vanilla french ROM.
silviu.h said:
Hi, I have the HTC Advantage (not Ameo, not Dopod), and the vanilla french ROM.
Click to expand...
Click to collapse
Thanks for the reply. That would explain why to a large extent it works on your device.
P.S. try \Windows\HTCICON.dll (I think that is the equivalent to shell32.dll)
Let us know how you get on.
Thank you for your answer.
The hack from mahjong works OK, except for the quirks I have already posted above (the Calc.exe icon is too big and I can't find the main icon store). htcicon.dll doesn't exist
However it's OK for Tomtom.
I'll keep you posted on my findings (I'm not giving up, I just have to go to bed )
See you,
Silviu
mackaby007 said:
No HTC Plugin on the Ameo Today settings menu either, but visible in HLKM...software etc...as the HTCHomeplug.
I can get some of my choice of programs in the TrayApplet, but not the associated icons!!??!!
Same as before when I tried. Anyone else with an Ameo who has had success in getting it to work with the right icons?
Click to expand...
Click to collapse
Yeah that was the reason for adding this to my note: "If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin..."
Only for HTC users I'm afraid.
Best Regards,
mahjong
mahjong said:
Yeah that was the reason for adding this to my note: "If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin..."
Only for HTC users I'm afraid.
Best Regards,
mahjong
Click to expand...
Click to collapse
Well, you can simply enable it on the T-Mobile Ameo using the following Reg-Keys:
- Navigate to: HKLM\Software\Microsoft\Today\Items
- Create a new Key named: HTC-Homeplug (or whatever you like)
- Navigate into that key
- Create the following items under that key:
String: DLL
Value: htchomeplug.dll
DWORD: Enabled
Value: 0 (or 1 if you want to enable it directly)
DWORD: Flags
Value: 0
DWORD: Options
Value: 0
DWORD: Order
Value: 0
DWORD: Type
Value: 5
After doing the above go to your today-screen settings and the Homeplug plugin is there...
Cheers
I seem to have BOTH HTCHomeplug and Trayapplet on my Ameo
It seems that there is a today item [email protected] or something I can turn on/off that doesnt appear to do anything, I beleive this is turning on/off the HTCHomeplug.
Because Trayapp is already on, and overwriting the HTChomeplug you only see its icons, therefor the homeplug is hidden.
I will experiment with turning off trayapp then turning on the @home today item and see what happens, but it looks like a lot of the confusion for Ameo users is the fact both are installed.
I did a hard reset, and didnt fiddle with the home/tray stuff, so this is how the rom set it up!
HKLM/software/htc/HTCHomeplug
HKLM/software/htc/TrayApplet
Both have keys of (and ONLY of),
PowerIconSlot=0
RotateIconSlot=1
In them.
Under HKLM/software/microsoft/today/items/[email protected]
DLL=hztdplug.dll
enabled=0
flags=0
options=0
order=1
type=5
Pyrofer said:
I seem to have BOTH HTCHomeplug and Trayapplet on my Ameo
It seems that there is a today item [email protected] or something I can turn on/off that doesnt appear to do anything, I beleive this is turning on/off the HTCHomeplug.
Because Trayapp is already on, and overwriting the HTChomeplug you only see its icons, therefor the homeplug is hidden.
I will experiment with turning off trayapp then turning on the @home today item and see what happens, but it looks like a lot of the confusion for Ameo users is the fact both are installed.
I did a hard reset, and didnt fiddle with the home/tray stuff, so this is how the rom set it up!
HKLM/software/htc/HTCHomeplug
HKLM/software/htc/TrayApplet
Both have keys of (and ONLY of),
PowerIconSlot=0
RotateIconSlot=1
In them.
Under HKLM/software/microsoft/today/items/[email protected]
DLL=hztdplug.dll
enabled=0
flags=0
options=0
order=1
type=5
Click to expand...
Click to collapse
The T-Mobile plugin has nothing to do with the HTC-Homeplug. HTC-Homeplug provides the sam functionality as the TrayApp.
The [email protected] Today Plugin is only useful for T-Mobile customers as it provides functions for HomeZone users.
The dll name hztdplug.dll means HomeZoneTodayPlugin...
If you want to use the HTC-HomePLug plugin you have to create the registry key I've posted above.
Cheers
Ok, I dont want the homezone rubbish.
But im still stuck with both HTCHomeplug and Trayapp
How do I enable/disable the trayapp? That doesnt seem to have any today element to it. I cant get icons working at all in trayapp and wanted to try the HTCHomeplug as that looks a much more userfriendly app.
Pyrofer said:
How do I enable/disable the trayapp?
Click to expand...
Click to collapse
Go to HKLM\init
Delete the Launcher for TrayAp.exe. On mine it is Launch92...
Make a Softreset after you changed this setting and the TrayAp is gone.
Cheers
Thanks!
I now have the HTC Homeplug working, and the trayapp gone! W00t!
I like the bigger icons, and now I can edit them better im happy. Much nicer.
Anyone thought about coding a contol panel applet for this homescreen plugin??
Moskus said:
Excellent! I will try this!
When using TrueVGA, does anybody know a way of making the icons work? I see only 1/4th of an icon, and it's even the wrong icon. The only icon is the one for the Light Settings...
Click to expand...
Click to collapse
If you use combination of Spb pocket plus and Commmgrpro, you don't need to deal with these problems of wrong size icons in the comm manager and home plug. Both of these need not be used at all.
I'm yet to find a replacement for Spb GPRS monitor though. SPb GPRS monitor also have problem displaying in true VGA. There are some but they do not show the kbps figure - only the downloaded volume.
Let’s sum up what we already know.
update 19-03-2008 : Icon tutorial by Luigi
update 26-03-2008 : Background mod by asefsef, some cleaning done.
*** IF YOU KNOW ANYTHING USEFUL NOT MENTIONED HERE, JUST PM ME AND I WILL UPDATE THIS POST. ***
0-Basics
.dat files need to be opened using winzip. To extract the files you will need to use a password which is:
PASSWORD = b0fm18zq
*** WARNING ***
If you plan to use WinRAR instead of WinZIP to reencrypt the files, be sure to change the radio checkbox from RAR to ZIP format before entering the password (thanks cincij for the trick).
1-Localization
Simply edit the SpbMobileShell.txt file and change the corresponding items to your needs:
…
Text Messages|Messages texte
My Documents|Mes documents
…
Note that not all of the texts will be changed; some of them require registry hacks.
2-Customize the layouts (Quick and dirty tuto from SPBCLUB, written by met3ora ?)
(I will use brackets to indicate the XML tags, since the SPB forum doesn't like the XML tags.)
Copy qa_layouts.dat to your computer.
Using a WinZip, extract Launcher.xml, using the password b0fm18zq.
Opening up Launcher.xml in Notepad, you can see how MS reads the file. There are a few layouts that are defined, and are based on screen size and orientation. For my Kasier, 240x320 and 320x240 are the portrait and landscape layouts, respectively.
Under {Layout Name="240x320"} and more specifically under {Plugins Extends="Default"}, we find what we're looking for. The first 12 plugins (named rN) are the "pinned menu" buttons, and the next 6 (named mN) are the large buttons. Defined in each Plugin is the following line (with variation on the numbers, of course) {BoundRect X="0" Y="182" Width="39" Height="45"/}. So obviously X and Y are the X and Y positions in pixels, and Width and Height are, well, width and height also in pixels.
If you'd like to remove all the 12 pinned menu buttons, simply remove the following lines (for r0-rB):
{Plugin Name="r0"}
{BoundRect X="0" Y="182" Width="39" Height="45"/}
{/Plugin}
Just delete them, and then they're done. Now, this leaves the bigger launcher menu sitting on the bottom, looking pretty odd since there's a big void on the top. To even out the void, I moved each of those big buttons up 45 pixels. Why 45? Well, 45 was the height of one of the icons in the pinned menu, so moving it up that much would leave 45 pixels above and below the big grid.
So just simply subtract 45 from each Y coordinate of each plugin m0-m5, giving you (for m0-m2) 46 and (for the next 3) 137.
Now, I don't like the grid. Fortunately, we can just hide the grid by finding this line at the top of the XML file, under {General}, which is {Int Name="LineOpacity" Value="64"/}. Simply change the Value to 0, and that will hide the grid lines.
There you go, now the 6 button launcher is in the middle of your Launcher screen, with none of those pesky 12 pinned items. Do the same thing under {Layout Name="320x240"}, except of course change the numbers so that your 6 grid is in the middle of your screen.
Save the file.
Go back to WinZip and add Launcher.xml back into qa_layouts.dat, remembering to overwrite the old Launcher.xml and remembering to encrypt it again with the same password (which is b0fm18zq).
Now replace qa_layouts.dat in the \Program Files\Spb Mobile Shell\ folder and soft reset your phone.
Click to expand...
Click to collapse
How to get rid of this annoying icon tab at the bottom (Why do this soft has gestures enabled AND shortcuts ?) netzcoyote has a solution:
Not sure if this is already known:
To get rid of the icon tab at the bottom, edit Main.xml in qa_layouts.dat:
Basically, I moved the tab below the screen's visible area.
- In every layout node you want the tab to disappear, add 47 (the tab height) to the Y-coordinate of the plugins named Tab1, Tab2, Tab3 and Tab4.
- In order to make the area where the other elements appear extend to the bottom of the screen, add 47 to the height of the Plugin named Subform.
This expands the canvas height on which to show elements like the calendar, clock, menubuttons, etc.
Now you have to go into those xml files (for example LockScreen.xml) and change those element's coordinates, heights, etc. where appropriate.
This can easily be done with the menu tab, launcher tab, speeddial tab, etc.
Navigation with left and right gestures WORKS!
Click to expand...
Click to collapse
3-Customize the icons
Thx 2 Luigi
Do-it-yourself Icon Tutorial: here. <- Use this !
4-Customize the background
Thx 2 asefsef
So far, doing this is pretty easy:
- Extract files from qp_bkg_now.dat
- Change the separator2 and its mask to 240x320.
- Make the mask all white.
- Then put whatever image you like into the separator2 bmp.
You have to save the file as a Windows - 16bit - R5 G6 B5 - .bmp file.
if u miss the separator, just photoshop the separator back into the file. (thats not cheatin! >< hehe, it IS the separator layer after all.)
5-Registry Hacks
You can do some pretty nice things by directly editing your registry:
Look at the keys located here:
HKLM>Software>Spb Software House 2>Spb Mobile Shell>
How to enable the 9th icon with a 3x3 layout:Just create a .reg file with this inside:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\Spb Software House 2\Spb Mobile Shell\Menu\Root\Games]
"Image"=dword:00000008
"Text"="Jeux"
"MRUImage"=dword:000000BF
"Index"=dword:00000007
"Inactive"=dword:00000001
"Add"=dword:00000001
Copy to your PDA, and launch it from there. The "Games" Menu should be available in the settings as a 9th icon.
Here’s another exemple done by Vincentvg:
gr8 work you all!
I now have 9 buttons and no need for all possible submenus. Therefore I started looking to use one of the menu buttons to activate the taskmanager from the main menu tab.
in the registry HKLM>Software>Spb Software House 2>Spb Mobile Shell>Menu>Root I added the ninth menu with folowing values:
Add = 0
Image = 8
Index = 9
Text = Active Tasks
Type = TaskManager
And the most amazing is that I got it 2 work!
Looking at existing 'Type' regvalues show that the menu buttons can be used for a lot more!
Click to expand...
Click to collapse
6-Integration with Pocket Informant, Agenda Fusion and Agenda One
http://www.spbclub.com/forum/viewtopic.php?t=7794
7-Make SPB your Today screen
Have a look here, thedumbkid has done something neet for us, called SPBWatcher.
http://forum.xda-developers.com/showthread.php?p=2029338
8-Nice links
HOT Theme collection for SPB mobile Shell 2, maintained by iamwhoiam
http://forum.xda-developers.com/showthread.php?t=380103
The development thread at XDA:
http://forum.xda-developers.com/showthread.php?t=374335
SPB Club:
http://www.spbclub.com/forum/viewtopic.php?t=15353
ActualiteMobiles: (french)
http://www.actualitemobile.com/forum/index.php/topic,1195.0.html
English translation of 4PDA.ru:
http://209.85.135.104/translate_c?hl=en&langpair=ru%7Cen&u=http://4pda.ru/forum/index.php%3Fs%3Da905e4fde300239b84d47f1dfd36ea09%26showtopic%3D31453%26st%3D2340%23entry1522182
SPB Mobile Shell 2.0 Beginner's How-to (Continued)
natong's Example to change menu Texts, Types and Image icons
Click Here
natong's Conclusion to make 3x3 icons (9 menus)
Click Me
natong On how make a tab for 16 speed shortcut icons
Press Me
Thank u ..
Great Work...
Dredd67 said:
*** WARNING ***
WinRAR seems OK for unpacking the files, but there has been some reports that you need WinZIP to reencrypt the files into the .dat. Files reemcrypted winth winRAR, even with the right password won’t work with SPB Mobile Shell 2.
Click to expand...
Click to collapse
For me it works just fine
Good job!
Thx a lot!!
This is exactly what I was looking for!!!
Congratulations for this sum up!!!
bon tuto mon ami et vive actualitémobile lol
Dredd67 said:
*** WARNING ***
WinRAR seems OK for unpacking the files, but there has been some reports that you need WinZIP to reencrypt the files into the .dat. Files reemcrypted winth winRAR, even with the right password won’t work with SPB Mobile Shell 2.
Click to expand...
Click to collapse
I use WinRAR to repack, you just have to be sure to change the radio checkbox from RAR to ZIP format before entering the password.
Thank you very much for sharing, This is a good tutorial for everyone who love to customize spb mobile shell 2.
Thx
cincij said:
I use WinRAR to repack, you just have to be sure to change the radio checkbox from RAR to ZIP format before entering the password.
Click to expand...
Click to collapse
Thanks for the details. I will update the 1st post according to this.
Thanks a lot for this. I'll be posting it over at the SPBClub if you don't mind!
Brilliant idea!
Great idea Dredd and thanks for the hard work to set it up and maintain it from here on out.
met3ora said:
Thanks a lot for this. I'll be posting it over at the SPBClub if you don't mind!
Click to expand...
Click to collapse
No problem !
Very nice post. It will be very helpful to people like me who intends to play with mobile shell.
Thanks.
Very nice. Is it possible to hack Mobile Shell in a way to display the full-time events (like birthdays, anniversarys) on the today screen?
Any love for the 240x240 people?
ceoprez said:
Any love for the 240x240 people?
Click to expand...
Click to collapse
I have requested this as well a couple times, I am trying to do it myself, but...well.....it hasn't been pretty!!!!
(+1 on this request LOL)
ceoprez said:
Any love for the 240x240 people?
Click to expand...
Click to collapse
Found this on SPBClub. It was done by bamse. Give it a try, and if it works please report it.
Good work. Thumbs up to you. Just an annoying question to ask. In 9 tab launcher, I have only 8 icon. Missing is the favourite/game tab. There is also no option to tick in the setting/customise menu, as it is not there. Is there any registry tweak that I can do to make it show in the customise menu setting? Hope you understand. Thanks
fantastic thread! ty
kangmas said:
Good work. Thumbs up to you. Just an annoying question to ask. In 9 tab launcher, I have only 8 icon. Missing is the favourite/game tab. There is also no option to tick in the setting/customise menu, as it is not there. Is there any registry tweak that I can do to make it show in the customise menu setting? Hope you understand. Thanks
Click to expand...
Click to collapse
Just create a .reg file with this inside:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\Spb Software House 2\Spb Mobile Shell\Menu\Root\Games]
"Image"=dword:00000008
"Text"="Jeux"
"MRUImage"=dword:000000BF
"Index"=dword:00000007
"Inactive"=dword:00000001
"Add"=dword:00000001
Copy to your PDA, and launch it from there. The "Games" Menu should be available in the settings as a 9th icon.
Edit: ah yes you can replace "Jeux" with "Games" or whatever you langage is.
Hi Guys,
How can i remap the softkeys of Rhodium-Manila? I want to change the Sofkey "Phone" on Hometab, because it has exactly the same function as the green telephone key, so it's a real waste...
PelloG said:
Hi Guys,
How can i remap the softkeys of Rhodium-Manila? I want to change the Sofkey "Phone" on Hometab, because it has exactly the same function as the green telephone key, so it's a real waste...
Click to expand...
Click to collapse
You can use HD Tweak to remap these 2 soft keys
PelloG said:
Hi Guys,
How can i remap the softkeys of Rhodium-Manila? I want to change the Sofkey "Phone" on Hometab, because it has exactly the same function as the green telephone key, so it's a real waste...
Click to expand...
Click to collapse
Right & left SoftKeys can be changed using CERegedit while synced to PC, or PHM Regedit directly on your phone.
The keys in question can be found here:
HKLM\Software\HTC\Manila
I have mapped
HomeLSKPath to \Windows\tasks.exe
with a corresponding link name at
HomeLSKText of Tasks
There are ways to map to other Manila shortcuts like All People.
http://forum.xda-developers.com/showpost.php?p=3509952&postcount=8
Coutesy of Elim
Once settling on what I wanted, I have made a little cab from this site:
http://triton.homeip.net/RegistryChanger/
Courtesy of Fmstrat
http://forum.xda-developers.com/showthread.php?t=435140
So now everytime I flash, I just run this cab to change the registry so I get my preferred home page links back.
There is a limit to what can be customised.
In Settings, I couldn't find a way to change LSK All Settings from connection settup to actual settings. Dutty did it in one of his ROMs.
thnx guys...that works
thats it, cool !! thanx a lot. I switched the left homekey on my TP2 in Bxsteez ROM from phone to all contacts. Much better Who needs a "Phone soft button" ??
Xaddict said:
Right & left SoftKeys can be changed using CERegedit while synced to PC, or PHM Regedit directly on your phone.
The keys in question can be found here:
HKLM\Software\HTC\Manila
I have mapped
HomeLSKPath to \Windows\tasks.exe
with a corresponding link name at
HomeLSKText of Tasks
There are ways to map to other Manila shortcuts like All People.
http://forum.xda-developers.com/showpost.php?p=3509952&postcount=8
Coutesy of Elim
Once settling on what I wanted, I have made a little cab from this site:
http://triton.homeip.net/RegistryChanger/
Courtesy of Fmstrat
http://forum.xda-developers.com/showthread.php?t=435140
So now everytime I flash, I just run this cab to change the registry so I get my preferred home page links back.
There is a limit to what can be customised.
In Settings, I couldn't find a way to change LSK All Settings from connection settup to actual settings. Dutty did it in one of his ROMs.
Click to expand...
Click to collapse
Hi Xaddict,
Great stuff, I want to change the LSK to DeviceLock. Changing the text was obviously no problem, but do you perhaps know the path?
I tried what I got from total commander as path: \windows\VJDeviceLock.exe, but that doesnt really work..
Thanks,
PB
i have two questions related to registry keys:
how can I add values of a registry key to cht home tab, e.g. as a simple text label?
how can I automatically get icons changed based on a certain value of a registry key, e.g. if registry value is 1, display icon1, if registry value is 2, display icon2, etc
could somebody point me in a right direction which files to modify?
thanks!
Create CHT addon Widgets
I think you need to create CHT addon widgets for this.
See : http://forum.xda-developers.com/showthread.php?t=792303
Section 6 Development resources
Section 4 Contains "state links" widgets
Widgets reading registry keys are not yet available/developed but this would give great flexibility to CHT.
greetings
THANKS for your answer