Getting "Unexpected Error" - Windows Mobile Development and Hacking General

Hi,
I am getting this "unexpected error" (details in attached screenshots) when I try to run Reperion and the new TV guide. I tried to install CF 3.5 but didn't help. I used to be able to run Reperion, but I can't remember what I did to break it.
Any thoughts?
I have a AT&T Tilt with original rom (details in attached screenshot).

seen this on another program, and the solution was to delete the ".INI" file that was "0kb". It was couse by early termination.
Hope this solves it.

NiteStalker said:
seen this on another program, and the solution was to delete the ".INI" file that was "0kb". It was couse by early termination.
Hope this solves it.
Click to expand...
Click to collapse
Where can I find that file?

Related

Unlocking files on x7501

Hi I am looking for an app to unlock my windows files on my phone. When I try to delete most files it says "unable to delete, may be in use" so is there a program to let me do this and is it the one posted called "Unlocker"? Thanks...TJ
TrekkerJmm said:
Hi I am looking for an app to unlock my windows files on my phone. When I try to delete most files it says "unable to delete, may be in use" so is there a program to let me do this and is it the one posted called "Unlocker"? Thanks...TJ
Click to expand...
Click to collapse
I encountered this problem once about 8 months ago. I had made a couple of posting on this forum somewhere. I can't remember what I did to revolve it but nobody else had similar problem then. I'd also try to find and see if I can locate my post.
Thanks I would appreciate it. I want to remove some files that are not necessary...TJ
Here it is. I hope this matches the problem that you were describing.
http://forum.xda-developers.com/showthread.php?t=309932
Thanks for the reply. I don't want to to a hard reset unless its necessary so I'll just wait for a program to come along. Thanks again...TJ

G'Reloc error...

I'm getting crazy over here...
from one moment my G'reloc does give me errors when applying.
It says:
Can not open file C:\Kitchen\SYS\***\***
*** = a different map/file each time
I tried different G'Reloc.exe files and used different SYS-folders (even ones that worked before without any problems)
Can not cook roms anymore because they will not boot somehow...
Please help me with this weird error..
What are the files it's trying to access?
Also check out the IRC room they have, if it's still up at least.
TheChampJT said:
What are the files it's trying to access?
Also check out the IRC room they have, if it's still up at least.
Click to expand...
Click to collapse
It's a different file each time....beats me...
But often it is one of the bluetooth related files....
Maybe the files you downloaded were corrupted. Try manually replacing the files, or just uninstall and reinstall the kitchen.
TheChampJT said:
Maybe the files you downloaded were corrupted. Try manually replacing the files, or just uninstall and reinstall the kitchen.
Click to expand...
Click to collapse
Ok I know a little bit more...:
I formatted my laptop and did a clean install of windows...
After that g'reloc worked again.
I installed all programs I always use on my pc again.
And today when I used G'reloc again I get the same error each time. Even if I use different locations or diffirent SYS folders (also ones I know they work!)
Which program or setting interacts with G'reloc???
Merten i don't use that program because i don't know what it does.
But i tryed to open it but i think i got the same error as you got.
Is it something like this: cannot open file (root\dir\imageinfo.bin).
And then you only have one option to click the ok button (this will exit the program)?
Know i tryed some other g'reloc programs what i got and the all gived me the same error pointing to the imageinfo.bin and then give me one option to click the ok button.
But there was one g'reloc program what did work and gived me no error.
I send a email to you with g'reloc.exe so it could be that it will give your virusscan some trouble because it is a .exe file I hope it will work for you.
I will back in some hours so i can't respons to your questions so fast.
menomenic said:
Merten i don't use that program because i don't know what it does.
But i tryed to open it but i think i got the same error as you got.
Is it something like this: cannot open file (root\dir\imageinfo.bin).
And then you only have one option to click the ok button (this will exit the program)?
Know i tryed some other g'reloc programs what i got and the all gived me the same error pointing to the imageinfo.bin and then give me one option to click the ok button.
But there was one g'reloc program what did work and gived me no error.
I send a email to you with g'reloc.exe so it could be that it will give your virusscan some trouble because it is a .exe file I hope it will work for you.
I will back in some hours so i can't respons to your questions so fast.
Click to expand...
Click to collapse
Thanx man for the effort. But I did not receive a thing... did you mail to:
[email protected]?
If your back maybe you can upload to rapidshare?
Thanx anyway!!
Well, I came across two things in PPCGeeks forum. People reported errors when they were running G'reloc on FAT32 en fixed it by changing to NTFS.
The other thing was that people reported a fix by just disabling their antivirus program. This might explain why it worked before you started installing all your programs on a clean windows install. I hope it works for you as well because I really like your roms
Maart84 said:
Well, I came across two things in PPCGeeks forum. People reported errors when they were running G'reloc on FAT32 en fixed it by changing to NTFS.
The other thing was that people reported a fix by just disabling their antivirus program. This might explain why it worked before you started installing all your programs on a clean windows install. I hope it works for you as well because I really like your roms
Click to expand...
Click to collapse
WOOHOOOO!!!! the Virusscanner was the problem!!!! I use kaspersky for a year but probably since a recent update it messes up g'reloc....
I will be cooking again.....!!!!
Thanks for the great tip!!!!!
Next time, please post questions in the Q&A section.
thank you

Question about HTC HD2

Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Have you tried Google yet?
Hockey_Rulez11 said:
Hey u guys/girls,hope u have a good day so far
k so i downloaded like 1 or 2 HD2 Games and when i open it to play, it says tht i need a newer version of the Microsoft® .NET Compact Framework...so.. can anyone help me with this?
Thxs in advance
Click to expand...
Click to collapse
Download it from here:
Code:
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
Or get the .cab from MoDaCo, for a 2MB download, instead of a 33MB download.
http://www.modaco.com/index.php?act=attach&type=post&id=23810
(Does require registration)
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
fitnessvip ; yea i tried this but i wasn't SURE how to activate it on the HD2. How i did it was save the file onto the destop then connect the HD2 to the computer then open up the Phone memory (NOT THE "STORAGE CARD") then just copy and paste the Framework into tht place.so then i thought i was done so then i disconnect it then press the start button and going to "File Explorer" and activate it from there but it doesn't work
Hockey_Rulez11 said:
nljuggler ; oooh yea, how could i forgotten tht? ofc i tried google.(not tryin to b mean) **ur 2nd comment** - naw no thxs
Click to expand...
Click to collapse
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
k thxs man
nljuggler said:
Well that's how I found the result in my second post. If you should decide to download it anyway. Copy the .cab file anywhere on your phone (or storage card). Find it with the File Explorer on your phone and click it.
It will start the installation. I'm not even sure it's going to ask you where you wish to install it, but do select 'Device' if appropriate.
Click to expand...
Click to collapse
OH YEA i forgot after downloading it,can i delete the .cab file? or do i have to keep it there?
well after downloading the .cab file and installing it,i opened up the download HD2 game and it was an Error...
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
nljuggler said:
Yes, you can delete .cab files after installing them. Too bad the game gave you an error. What was the exact error?
Click to expand...
Click to collapse
I got this error after installing:
MissingMethodException
Cant find PInvoke-DLLen HTCAPI
i Sensors.HTCNavsensor..ctor (form form=
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
nljuggler said:
Hey, a new actor enters the scene. Welcome [email protected]@!
A quick search on Google shows that your not the only one with this problem. Haven't found out what caused it yet.
But when do you get this error, as it would be very coincidental if you are referring to the same game as Hockey_Rulez11. Because he never mentioned the nam of the game.
Click to expand...
Click to collapse
I got the error after installing diamonCubes and Lightsaber.
I have also innstalled netcfv35, but have not done anything with this file after installing it.
In remove programs the program name is: Microsoft .net CF 3.5 so I think everything is ok, but if there is any thing you have to to after the installation I have not done that.
I new to HD2 and pocket PC.

Apps Installation

Helo everyone. I'm new to the forum and to Windows Mobile. I hope this question is in the correct place....don't want to get bashed on my first post. I have searched for about an hour now for the answer to my question but I can't find anything that relates to my problem. I am trying to install a converter..."Pocket Converter 1.50" on my TMobil USA HTC HD2. After downloading the cab file into a folder...a screen pops up that says "installation of Pocket Converter 1.50 was unsuccessful". OK...I then tryed one called "MSS Converter 1.08. Same thing happened with it too. I have successfully installed other apps so I was wondering what might be the problem.
I have had the same issue a couple of times. I think sometimes the download gets corrupted. I just redownload and usually the app will install.
Thanks for replying......I've downloaded these 2 apps numerous times and on different days but still no luck. Do you think I could download them to my computer then copy them over to the phone and install?
That may be a good idea, other than that maybe try and download from another source. I think also some apps have issues with the hd2.
signman, do you have links to the exact cabs you tried, so I can test them on mine?
What kind of converter program are those? If they're for converting units of measurement, I use the uConvert app which works great on the HD2, and was developed by an xda member...I've attached the cab here for you to try if that's what you're looking for.
i used to have this happen to me all the time when i downloaded the cab directly from my hd2. Try using a pc to download it then transfer via usb and install. Hope it works!
jfmckenna said:
i used to have this happen to me all the time when i downloaded the cab directly from my hd2. Try using a pc to download it then transfer via usb and install. Hope it works!
Click to expand...
Click to collapse
I have it happen alot with opera on the phone, but when I goto the same link with IE it works fine .... I guess IE still has its uses..
sirphunkee said:
signman, do you have links to the exact cabs you tried, so I can test them on mine?
What kind of converter program are those? If they're for converting units of measurement, I use the uConvert app which works great on the HD2, and was developed by an xda member...I've attached the cab here for you to try if that's what you're looking for.
Click to expand...
Click to collapse
Sorry for taking so long to post back...as I couldn't find my post!
The links to the apps I am trying to download are as follows...
Well since I'm a new user....I can't post the links..I got them from freewarepocketpc.net
I finally got the MSS Converter downloaded and installed from another website. Can't remember where I got it. I'm going to try to get your posted cab directly to my phone and try that one. Well that didn't work. Installation says it was unsuccessful. Maybe I have to do it like jfmckenna has suggested. Thanks for helping me out guys...I really appreciate it.
Signman1123 said:
Sorry for taking so long to post back...as I couldn't find my post!
The links to the apps I am trying to download are as follows...
Well since I'm a new user....I can't post the links..I got them from freewarepocketpc.net
I finally got the MSS Converter downloaded and installed from another website. Can't remember where I got it. I'm going to try to get your posted cab directly to my phone and try that one. Well that didn't work. Installation says it was unsuccessful. Maybe I have to do it like jfmckenna has suggested. Thanks for helping me out guys...I really appreciate it.
Click to expand...
Click to collapse
If all these installs are failing, I'm guessing you're either missing the NetCF 3.5, or the sdkcerts cab, both are attached below. These are necessary to run many of the apps/cabs you'll find here and at other sites like freewarepocketpc.net. Just put the cabs on your SD card (I recommend just putting all the ones you install in a folder there for easy reference later), and run each one, then you'll probably be able to install the stuff that was giving you issues.
cab files
I've downloaded the cab files you posted but the NetCFv35 says I have to first remove the older version. How do I remove the older version? I know nothing about Windows Mobil...sorry.
sirphunkee said:
If all these installs are failing, I'm guessing you're either missing the NetCF 3.5, or the sdkcerts cab, both are attached below. These are necessary to run many of the apps/cabs you'll find here and at other sites like freewarepocketpc.net. Just put the cabs on your SD card (I recommend just putting all the ones you install in a folder there for easy reference later), and run each one, then you'll probably be able to install the stuff that was giving you issues.
Click to expand...
Click to collapse
I thought HD2 did have NetCF 3.5 preinstalled
I got a Telstra Hd2
do i need to install these to cabs
Thank you
Signman1123 said:
I've downloaded the cab files you posted but the NetCFv35 says I have to first remove the older version. How do I remove the older version? I know nothing about Windows Mobil...sorry.
Click to expand...
Click to collapse
ilordvader said:
I thought HD2 did have NetCF 3.5 preinstalled
I got a Telstra Hd2
do i need to install these to cabs
Thank you
Click to expand...
Click to collapse
Right...I forgot that it was already loaded on the stock ROM, you can skip that signman.
m'lord, I would suggest installing the sdkcerts...it will probably be necessary for you at some point if you're installing any homebuilt apps. I suspect that most custom ROM's would have it built in.
sirphunkee said:
Right...I forgot that it was already loaded on the stock ROM, you can skip that signman.
m'lord, I would suggest installing the sdkcerts...it will probably be necessary for you at some point if you're installing any homebuilt apps. I suspect that most custom ROM's would have it built in.
Click to expand...
Click to collapse
Humm...if it is the same version I already have on the phone...wonder why it is telling me to remove the older version first. Where can I look to see what version I have on the phone?
sirphunkee said:
Right...I forgot that it was already loaded on the stock ROM, you can skip that signman.
m'lord, I would suggest installing the sdkcerts...it will probably be necessary for you at some point if you're installing any homebuilt apps. I suspect that most custom ROM's would have it built in.
Click to expand...
Click to collapse
where can i get the sdkcerts cab for hd2
please
cab file
Check post #9 above.
Flash Lite
Sirphunkee. I managed to get your uConvert installed but it is trying to install Flash Lite. That install does not work...I get a "error installing Flash Lite". Is there anything else I can do? I downloaded Flash Lite to my computer and copied it to my phone. Still won't work.
I used a Flash Lite cab file posted on the forum for my fix. Thanks everybody for your help.
Signman1123 said:
I used a Flash Lite cab file posted on the forum for my fix. Thanks everybody for your help.
Click to expand...
Click to collapse
Ok good, I'm glad you got it working (I'd forgotten it wants flash light installed to get it to work). Does uConvert cover everything you need then?

[Q]software update files

after zune downloads the update, it has to store the files somewhere before deploying them to the phone, right? so, does anyone know where zune would store these temporary files? i couldn't find any relation between zune and my temp folder, so i will assume that it does something else, or that i am wrong. any ideas? i just want to see what i can make of them, or out of curiosity if you want.
process explorers view on the update
attached is a log of a network and file monitor while zune was doing the update.
is that a successful flash you have there? if you can find out which files its bulking at you could then do a compare with the same working file from an HD7 assuming the file isnt encoded in some way it might then allow us to see what needs changed, unless of course it has nothing to do with the registry and its actually doing some kind of IMEI check or somekind of hardware scan
another posibility is that its bulking because its finding something in the ROM that is consistant only to the DFT release s file name, reg settings or perhaps some hardware ID
Well I got this far, it backup my settings, after a few reboots and one disconnect, but I got " We couldn't back up your phone because your registry settings are incorrect."
What if I simply remove the SD, reset device, and the partition is set on device instead of on SD. It appears that other than some basic hardware reg tweaks for the ROM the original DFT(ROM) is pretty close to stock. Im more curious about Microsoft's update and implantation procedures and possibility of bypassing than just simply updating my HD2. I figure a rom with updates will be provided soon enough. What do you all think?
norgan said:
attached is a log of a network and file monitor while zune was doing the update.
Click to expand...
Click to collapse
Thanks for providing this, seems that's where were stuck at. For now... bwa haha lol (joke).
If you're interested in the update file, I zipped up and attached what I found. Windows Phone 7 Connector (Mac OS X) stores the files in
~/Library/Application Support/Windows Phone 7 Connector/Cache/Device Update/
The update seems to be packaged in a MS cabinet file, with file extension .pks. The contents of this cab are the following:
appplatform.7.0.7004.0-7.0.7008.0.cab.pku
avcore.7.0.7004.0-7.0.7008.0.cab.pku
basedrivers_os.7.0.7004.0-7.0.7008.0.cab.pku
buildinfo.7.0.7004.0-7.0.7008.0.cab.pku
commsapps.7.0.7003.0-7.0.7007.0.cab.pku
commsplatform.7.0.7004.0-7.0.7008.0.cab.pku
coresvcscmn.7.0.7004.0-7.0.7008.0.cab.pku
deviceupdateagent.7.0.7003.0-7.0.7008.0.cab.pku
dmapps.7.0.7004.0-7.0.7008.0.cab.pku
location.7.0.7004.0-7.0.7008.0.cab.pku
msxipkernel.7.0.7003.0-7.0.7007.0.cab.pku
msxipkernel_uldr.7.0.7003.0-7.0.7007.0.cab.pku
rms.7.0.7004.0-7.0.7008.0.cab.pku
securitycore.7.0.7004.0-7.0.7008.0.cab.pku
shell.7.0.7004.0-7.0.7008.0.cab.pku
splash.7.0.7004.0-7.0.7008.0.cab.pku
syncapps.7.0.7004.0-7.0.7008.0.cab.pku
syncplatform.7.0.7004.0-7.0.7008.0.cab.pku
xna.7.0.7004.0-7.0.7008.0.cab.pku​
Same problem
Same problem here. Tried to update my HD2 with WP7 today and I got error 80180089 with "we couldn't back up your phone" as error description. Any solution?
Innovative said:
Same problem here. Tried to update my HD2 with WP7 today and I got error 80180089 with "we couldn't back up your phone" as error description. Any solution?
Click to expand...
Click to collapse
no there isn't a solution for now, just wait till a mod cooks up a rom with the new update.
Innovative said:
Same problem here. Tried to update my HD2 with WP7 today and I got error 80180089 with "we couldn't back up your phone" as error description. Any solution?
Click to expand...
Click to collapse
I have the same problem.. wait for a solution .. as soon possible

Categories

Resources