Hey guys... before I begin, heres what I have installed.
tcmp with various reg edits
Wisbar Advance2
Wisbar Advance Desktop
Null Keyboard
Here are my questions.
1. the volume slider no longer adjusts the system volume at the today screen. how can I fix this?
2. I was looking to have a big icon/object for the "Lock" function. How can I do that using Wisbar?
3. TCMP has enabled a secondary function for the 2 buttons below the screen--the left one for the "start" menu, and the right one for "close". After installing Wisbar, the right button still closes, but then after closing, it brings up the contact list, which is the primary function of that button (with a short press). How can I undo that?
4. The notification screen that pops up when I get a text msg, etc, is gone!(ever since Wisbar) I just see the icon on the top, but I want that screen back! how can I do that?
5. What is a good program to manually assign all buttons on the system to whatever function I want? (i.e. lock, changing the 2 buttons function, etc.)
Any help would be great!.
I've searched like hell, wiki and all, but can't find a way to do this.
When I click the signal icon in the top bar, the system status screen appears, which is fine, but then if I click the signal icon on that screen it closes and then a notification icon pops up to show me the signal status in a bubble.
Is there any way to go straight from the system status screen to the comm manager? rather than the really long way at the moment?
I'd be really happy if there was a third party app which took the system status screens place with more detailed info and comm manager in one.
hope someone can help.
Logicalstep
I don't know if it will solve your problem, but I simply added "Comm manager" as shortcut in the start menu. (2 clicks to comm manager)
I found that if I mapped the CommManager to the 'press and hold' call accept (green phone button) in the 'buttons' section in settings, then its nice and easy to load and it doesn't then matter where you are in your phone you can always get to commManager quick and easy.
I used to have this button mapped to use the camera, this is so I had a hardware camera button but the delay is too much to live with for me.
Hi,
Thanks for the tips, I know you can just assign comm manager to a button, but I was hoping there would be a more technical way to use the system status screen to go to the comm manager.
I already have on of my buttons mapped to rotate.
Thanks
Logicalstep
Use Ae button plus (i am using it to turn on-off wifi with a double press on the vol up button)
or
edit the registry so you assign the commanager to your left softkey @ homescreen (you can use HD tweak or Advanced config tools).
instead of doing that to get to comm manager why dont you just
press home
slide to settings
load comm manager
its like button, slide, tap, less than 1 second and you can do it with one finger or your thumb while holding your phone in the same hand
tap start , tap comm manager. your there
Logicalstep said:
Hi,
Thanks for the tips, I know you can just assign comm manager to a button, but I was hoping there would be a more technical way to use the system status screen to go to the comm manager.
I already have on of my buttons mapped to rotate.
Thanks
Logicalstep
Click to expand...
Click to collapse
Personally I feel 'Tap Start , Tap Comm Manager' is probably the best route to take but if you want to map a button to comm manager use AEB PLus
For example if you want you could use the Volume Up button to run Comms Manager as well as volume
Simply set Single Tap to run application and Double Tap for volume or whatever button & configuration you prefer
You have a choice of buttons to use and 3 option for configuration i.e. Single Tap, Double Tap & Hold Button
Well thanks for all your suggestions they are good ones, but as always me being very picky, I was kind of hoping there would be registry hack to allow me to do it from the system status, in my opinion this wouold be the more TF3d integrated solution allowing me to go to the comm manager just as pressing the volume button takes me to the volume controls.
It just a little illogical the way it shows the notification bubble instead of taking you to the comm manager.
What would be really great is a more advanced syatsm status screen showing all the connection info on it, such as wifi signal strength and status, data status
all icons with the ability to click on and go to comm manager.
I'm guessing this is probably just me, but I think that would be great.
Logicalstep
Start-Settings-System-Touch-FLO, untick the Show System Status screen checkbox.
At least that cuts out one unnecessary step..
hmm I don't really think that qualifies as solving my gripe as it just disables the system status menu and that doesn't fulfil any of my wish list.
Ok well if I can't get it to work with the touchflo system status screen is there a way to change what program is launched on the click of the task bar? That way I might stand a chance of making or finding an app that does what I want.
Logicalstep
doesnt the new htc notification thingy replace those bubble pop ups with a full screen finger friendly screen?
i dont know cos i havent installed it...
then clicking on the icon would take u to take screen to load comm manager
I downloaded WKTASK, you can find it on this site, which places an icon of all open programs on the task bar. Open Commmgr the first time and then leave it open on the task bar. Next time you need it one tap brings you there.
wktask looks cool thanks
how do i get the screen up on my hd2 that has the spirit level app on it.i think theres a g sensor calibration app on the same screen.iv tried all sorts but totally forgot....cheers.
1. (a) go to settings tab, or
1. (b) go to start menu and press settings
2. press the menu button on the bottom bar and select "all settings"
3. press the "system" folder
4. press the "G-Sensor" icon
Sorted
cheers buddy,i'v been pulling my hair out lol.....
I'm trying to assign some of the hardware buttons as shortcuts via the Settings > Menu (at the bottom right) > All Settings > Personal > Buttons but only the 'send' key is listed as an option (which I already have assigned to the task manager via a cab install). I cannot find the home, windows or back buttons which I want to assign. How can I add these to the button menu so that I can assign the functions/programs in the 'assign a program' drop down? Done a search and got nowhere.
check out AE
http://forum.xda-developers.com/showthread.php?t=241704
I tried aebplus out for the volume keys .... it installed correctly, then I reassign some of the keys, however they seem not to become active for me .. any ideas?
Frank
I have seen that prior LG phones including the V10 had a menu option to auto hide the three on screen soft keys at the bottom of the display, yet I don't seem to see that option on my V20. Am I simply missing it or does anyone know of an alternate way?
Go to settings > Display > Home Touch Buttons > Hide home touch buttons and then choose which apps you want to do it for