My friend's jamin when he tried upgrading with smart1 wm6
after the flashing process finished it gives the 3 colors of boot loader
the screen flickers continously with the 3 colors
no way to hard reset the device
and activesync doesn't feel it
I searched all the forum for a problem like this but I didn't find any
any suggestion please, or any help?
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
NetrunnerAT said:
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
Click to expand...
Click to collapse
Please how can i flash with the activesync doesn't notice my device and where's NVID Rom
Ok. I'll search for it but please help how can I flash it to the device which doesn't recognized or felt by PC
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
divxmaniak said:
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
Click to expand...
Click to collapse
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
must use NVID rom. maybe qtek nvid one from here? http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
hasanemara said:
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
Click to expand...
Click to collapse
If the problem still there, Try to release the battery for 1-3 hours and put it again to the device, go to the boot loader and pray. Hopefully it could work. Actually, this way worked on my Himalaya and Prophet.
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
ekto said:
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
Click to expand...
Click to collapse
I shall try and tell you the result
error 260 this is the result
i have a slight variation problem like this...
1. i was upgrading my O2 Neo to the latest WM05 & the phone went to bootloader mode & the upgrade started searching for the phone as normal..then some error & it stopped upgrading while the phone was in bootloader mode..
2. at that time,i got an urgent call & had to leave the phone in bootloader mode...
3. when i came back..the phone was dead & now it wont startup at all.. not even in the bootloader mode.
4. Maybe the batteries dead...so i charged it (Over night)..nothing happened in the morning..
5. kept the battery removed for about 5-6hours & still nothing happens..it simply does not startup.
6.I've tried holding the camera button & resetting, but it wont go into bootloader mode.
7. i;ve tried holding the connections button + camera button _ reset but it wont hard reset...
can anyone help me here...
what can i do???
hasanemara said:
error 260 this is the result
Click to expand...
Click to collapse
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
ekto said:
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
Click to expand...
Click to collapse
No I didn't change any and I can connect my o2 xda mini to the same cable
I want to ask few technical question
HOW CAN A SOFTWARE DAMAGE THE DEVICE?
CAN A SOFTWARE FOR EXAMPLE BURNS A PROCESSOR OR SOMETHING LIKE THIS?
If So there will be a big problem with those types of devices
a virus for example can destroy my device's board or processor!!
Yesterday My friend went to an I-mate customer service who tel him that
the board had been destroyed by the bad software !!!!!!!!!
Please Give me technical advice about this problem
and is there a web site for him to buy this board (i-mate jamin)?
I've tried everything... even tried it on my desktop... but my phone just wont turn on now. i've kept the battery removed for more than 8hrs now... i've even charged it for more than 8hrs non-stop..nothing happens..
maybe i should get hold of a charged battery & try it with that battery...?
Any clue how to get my phone started??
got it working !!! PHEW... i used my HP battery which was charged & put it into it..now i've got my bootloader & i'm installing the new OS as we speak... 15% done.... keeping my fingers crossed
done.. got my HP Ipaq battery , which was charged & my new started up in bootloader more.. PHEW !!!
66% done... keeping my fingers crossed
ok, installed...now, one more problem..my touch screen's not working...???
Any idea what to do?
i installed "Prophet_PDAViet_Step1"
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
So got my Dopod 838pro running windows mobile 5 and will upgrade it to windows mobile6 with any luck, at the moment im trying to upgrade the boot loader to SPL (Bootloader) version 2.10.Olipro (HardSPL v7) and im following this very handy guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
however i get to the very end where its supposed to flash the new boot loader and it sits there for a while until the updater utility comes back with ERROR [260] Update Error.
Which informs me that i should check to see if the phone is connected to the computer via usb, which it is.
It must connect to the phone cause it actually starts the process of trying to update the boot loader, i see it on my phone. It goes to a red, green and blue screen. Which says:
Herm1000
IPL-SSPL by Des
Herm100
SPL-1.09.ds
USB
The only option i have here is to press exit on the updater utility, and start again.
Nothing else happends after this.
Im running Windows Vista 64bit, have also tryed this guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Still no solution.
Currently i have:
IPL 1.01
SPL 1.06
Have also restarted my computer in between trying different things.
Anyone ever had this problem or know a fix?
Thanks in advance.
error 260 is an open port error. try a different usb port, disable antivirus and firewalls, or if avaiable try on a different pc, xp if possible.
heh, works on my XP machine.... >< Thanks.
Edit:
I tried a differeny USB port on my vista machine and that didnt work. I also closed absolutely everything and that didnt work either.
I cannot switch on my device. When I tried hard reset it stucks at bootloader. so tried to enter boot mode (red green blue screen) and reinstal rom. it starts and look it works properly but instalation of new room is not completed (error 270). have read simmilar topics in forums and it seems it´s because device is not connected with activesync. any ideas how to fix? please don´t say I have a brick
Cannot connect
Use the original cable supplied by HTC. There seems to be an issue with other cables.
sanjeev
Are your really using ActiveSync or Mobile Device Center?
In bootloader mode when connected via USB, can you read "USB" on the Bottom of the Display?
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
ypsilonq said:
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
Click to expand...
Click to collapse
Opens activesync at the PDA and the go to connections settings. (menu->connections).
See if USB connection is selected there.
Cheers
thank you. I tried what you suggest but no change :-(
is the error you got when flashing the original HTC ROM?
if not download it from the official HTC site and then flash it using SD card flash (for more info about see the wiki)
finally fixed!!!!!!!!!!!!
I find original rom (t-mobile) and followed instructions from link provided by y_bother. big thanks !!!
Hallo!
I have install virtual machine on my win 7 laptop with win XP mode. Download Cotulla's HTCMAG_ROM_WWE_O5 rom. Following the instructions I start flashing rom. In the middle appear err message. ActiveSinc shows not connected. I did`t know what to do. I have tried to connect again. Nothing.
Can anybody help me?
Please! It is my only device.
dobri_dobrev said:
Hallo!
I have install virtual machine on my win 7 laptop with win XP mode. Download Cotulla's HTCMAG_ROM_WWE_O5 rom. Following the instructions I start flashing rom. In the middle appear err message. ActiveSinc shows not connected. I did`t know what to do. I have tried to connect again. Nothing.
Can anybody help me?
Please! It is my only device.
Click to expand...
Click to collapse
After that I nave reset several times the device. I connected it to another computer with win XP and start it again. And guess what?
IT WORKS!!!