File Transfer Tutorial anywhere? - 8125, K-JAM, P4300, MDA Vario General

Out of the tens of files I've downloaded, only a few have worked for me as I have limited knowledge on the subject of transfering from PC to Wizard.
Files like this though, I just can't understand how I am supposed to transfer the, onto my Wizard as they don't want to move from the PC folder.
Here is the file I'm trying to transfer - it's actually a very useful Google search bar in the Today theme for Wizards.
Thanks for your help.

The file you're trying to download is a .cab file, right? So all you have to do is sync your phone with a computer, copy the .cab file to your phone (anywhere will do...I like to keep my .cab files on an SD card in the phone, so I have them if I need to reinstall them later).
Once the file is on your phone, just navigate to it with File Explorer (or any alternative), and double-tap the .cab file. Even though it displays as an unknown file type, .cab files are automated installers for windows mobile, and will install all the files needed for the program automatically. .Cab files are deleted automatically when the installation is completed, to help you manage the memory on your phone. You can circumvent this easily by right-clicking the file first, and setting it to "read only" in the options, but I would only do this if you're storing your .cab files on an SD card, like me.

Myrddin,
Thanks for your help on this!
Yup it's a CAB file. But when I download it and extract it, I can't physically move it from the folder it's in on the desktop. I have the Wizard Activesync File Explorer opened up, and I try to drag to file over, but when I drag it outside of the window it turns to a crossed out circle (ie, not allowed).
Scrap all the above in Italics - I tried it again and it went in fine.
Now, when I go into File Explorer and click on the setup file, it just brings me to the same page as it does on the PC. It contains all the characters for the installation, but nothing happens.
The filebar at the top shows file://\My%20Documents\_setup
Am I just being dumb?

Definitely not. The installer should handle this file for you without pause.
Just to satisfy my own curiosity I tried to install the file myself. No problems at all. It did open a licensing agreement during the installation that I had to Ok, but aside from that, nothing unusual about the install.
I suspect that one of several possibilities has occurred:
Your download was corrupted. Try d/l the one below...
Your phone is somehow locked to prevent installations (very unlikely)
Your operating system is hosed (especially likely, if not an "authorized" ROM)
Just to aid with troubleshoot, what is your operating system, IPL/SPL, etc., what is your phone service network?

Thanks.
Here's the info, hope this is what you need...
O2 Pay And Go.
Version -
ROM version: 1.5.4.2 WWE
ROM date: 11/8/05
Radio version: 01.09.10
Protocol version: 4.0.13.20
ExtROM version: 1.5.4.103
Hardware -
CPU: OMAP850
Speed: 195 MHz
RAM size: 64 MB
Flash size: 128 MB
Flash Chip type: M-Systems G3
Date bus: 16 bits
Storage size: 47.46 MB
Identity -
Model No: WIZA200
Platform: PocketPC
WM5
OS 5.1.70 (Build 14406.1.1.1)
Processor: OMAP850 - 195MHz
I'm not at home right now so I'll download that later. Thanks very much!

Pwallwin said:
Myrddin,
Thanks for your help on this!
Yup it's a CAB file. But when I download it and extract it, I can't physically move it from the folder it's in on the desktop
Click to expand...
Click to collapse
You are not supposed to extract the cab file. Transfer it without extracting it to your Wizard and run it. It will ask you where to install and it will do the rest.

XL3N7 said:
You are not supposed to extract the cab file. Transfer it without extracting it to your Wizard and run it. It will ask you where to install and it will do the rest.
Click to expand...
Click to collapse
Nope, still can't. I had tried not extracting it and extracting it.
Now I can't even transfer the file over again. When I click and drag the file icon turns into a black circle with an 'x' through it.
Myrddin, when you downloaded the file did it the icon show a little earth with '<' and '>' either side and 4 lines below it?
Thanks!

Do you have a card reader? Try removing the memory card from the phone, copy the .cab file to your memory card, stick it back in the phone, find the .cab file where you copied it with your file explorer and tab it to install. HTH.

Pwallwin said:
Myrddin, when you downloaded the file did it the icon show a little earth with '<' and '>' either side and 4 lines below it?
Click to expand...
Click to collapse
No. Are you using a USB cord and ActiveSync to sync your phone to the computer? If not, this can be a show-stopper. Third party apps usually do well enough at syncing, but to open the pathways that allow for file transfer it is usually necessary to have a USB connection via ActiveSync.
What OS is your computer running? Using Vista will surely cause problems. Windows XP is good and stable with ActiveSync. Using other operating systems is also highly suspect.
Do you have sufficient memory available to install this plug-in? If your phone is full of pictures of your significant other, then there won't be room. Not being able to transfer files to your phone makes me suspicious of this, too. Go to Settings > System > Memory and tell us what you've got free for storage and program.
If you have an unlimited data plan, or if you just REALLY want the plug-in, take your phone to a wifi hotspot and download the cab file directly from this thread to your phone, using its built-in browser. Then just double click the cab file icon. It is not possible to "extract" the files from a phone. You need specialized software to crack those .cab files open, and if this is kicking your butt, you might want to wait before trying something that technical.
One last ah-ha: You are on pay-as-you-go, you have no data plan, so GPRS/EDGE network is no-no for your phone, unless those plans have changed dramatically in recent months.

Arrgghh, this is frustrating!
Thanks for your help and patience guys.
I don't have a card reader, so that's out for now.
Myrddin, yes I'm using the USB cable and Activesync on XP.
I've got about 19MB free on the phone, and the same more or less on the storage card.
I've got GPRS working fine on my Pay As You Go, through help and the correct settings on this forum.
I think the problem may lie in my PC as I can't even take those files out of the folder and transfer them anywhere. When I click on the file, here are the steps I take...
Here I have opened it rather than saved it, but I have tried saving it too, just to the Desktop.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then here's how it appears on my PC...

DO NOT OPEN THE CAB FILE.
This has been said to you many times, but you keep insisting on opening it, to no avail.
Think of the .cab file as a .msi file that only works on your phone. Yes, most compression programs will open a .cab, but it's not formatted the way most .cab files are, so opening it yields you nothing serviceable. It is merely an aid to installation, putting all the needed files and registry entries where they need to be, and creating the necessary shortcuts.
If you have the cab file UNOPENED on your desktop, then right click the cab file on your desktop and choose properties, to see if the file has been set to read only, archive, or anything like that. This should not prevent you from opening or copying the file, but nothing else you're saying is happening makes sense to me either, so what the hey. If anything is checked, uncheck it all. Also, if you are not using an administrative user login on your computer, you may want to try logging out as a user, and logging back in as admin. It's unlikely this is the cause of your problem, but as I said before, anything goes right now.
If nothing is checked, do the following. If this doesn't work, I'm afraid you're on your own:
Click the link above to start the download (again)
Click Save. DO NOT CLICK OPEN
Navigate to your desktop
Click OK
On your desktop, click ONCE on the cab file, and press Ctrl+C on your keyboard
Connect your phone via USB and verify that it completes sync (icon stops spinning, no error messages)
Press WIN+E, or click Start > All Programs > Accessories > Windows Explorer
In the LEFT column, click My computer to expand it.
Click Mobile Device
Click My Documents
Press Ctrl+V
Disconnect your phone from the computer
On your phone, Click Start > Programs > File Explorer
Navigate to My Documents
Click twice on cab file to start it automatically
Follow instructions and let it load to regular memory (it's better to put today plugins on your memory than on your SD card, which can cause your phone to hang/freeze while loading the today screen)
You're either done, or so lost at this point that I cannot help you remotely
I don't mean to be condescending with this instruction, I just want to make absolutely sure you are doing this the way it should be done. Please report back any problems you have with this instruction. (...and to everyone else, if I missed something glaring, please post it!)
Short of all this, I can only recommend that you try downloading the file directly from your phone's web browser. It's not very big.
Good luck,
Myrddin

Well don't I feel stupid...
Seriously, it was so simple and I just couldn't figure it out!
It's on my Wizard right now, thanks to your time and patience Myrddin!
I now know how to upload CAB files onto my Wizard. Easy, innit?
Now, next is upgrading to WM6 please mate - GO!! Just kiddin'!
Really, I do appreciate your help. Very few people would go to such efforts to help out an annoying noob like that. This forum needs more peeps like you I think!

Pwallwin said:
This forum needs more peeps like you I think!
Click to expand...
Click to collapse
I appreciate the kind words.
I do have a habit of taking people's heads off once in a while (search and see for yourself), but sessions like this one are far more rewarding in the long run than just jumping on someone while they're down.
Sometimes, I just forget I'm in a bad mood before I start typing. ::sigh::

Myrddin Wyllt said:
I appreciate the kind words.
I do have a habit of taking people's heads off once in a while (search and see for yourself), but sessions like this one are far more rewarding in the long run than just jumping on someone while they're down.
Sometimes, I just forget I'm in a bad mood before I start typing. ::sigh::
Click to expand...
Click to collapse
This thread will I'm sure help scores of beginners like me install CAB files. That is, if they use the search function! lol!
I've just had a look at the TouchFLO on youtube - hubba hubba!
I'll have to look into that next.
Cheers!

Related

HTC Home Plugin for WM5 (3 and 6 tab).. finally !!

6 Tab HTC Home Plugin for Windows Mobile 5. Tried and working well on O2 Neo (HTC Prophet).
To install this app on your prophet, unzip the HtcHome6_WM5_comp_sdkcert.zip on your pc, copy the cab files onto your device and -
1. Run the SDK_Cert.cab on your device.
2. Run the HtcHome6_WM5_comp_sdkcert.cab on your device.
3. Reset your prophet and enjoy the app.
3 tab HTC Home Plugin for Windows Mobile 5. I have tried and it works on my O2 Neo.
To install this app on your prophet, unzip the HTCHomeWM5.zip on your pc and -
1. Copy the cab files onto your device.
2. Run the HTC Home Plug Today Plugin.cab on device (Not Storage Card).
3. Run the SDK Test Certs.cab on device.
4. Copy HtcHome.dll and HTCHome.dll.0409.mui files from the PPC Phone folder to the /windows folder on device.
Use Activesync to copy these two files since they might not be visible in your device File Explorer.
5. Restart your Prophet.
Enjoy !!
~ contribution by kram3r ~
And for Prophet users with a non English ROM, please take note to change the following before you reset your prophet,
- Rename the following files in /windows folder on device
1. HTC HDlg.exe.0409.mui to HTC HDlg.exe.xxxx.mui where xxxx is your international language code
2. HTCHome.dll.0409.mui to HTCHome.dll.xxxx.mui where xxxx is your internatinal language code
* The value for xxxx can also be found in the attached txt file (ROMlang.txt) extracted from the above link.
_________________________________________________________________
Umesh
O2 Neo (WM5)
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 2.15.13.27
Hey thanks, this one works on my Qtek S200 too!
Now my screen is nice and clean!
Is this something comletely different as the HTC Audiomanager? I tried that one some time ago. Can I build the AudioM in this one?
I've installed the plugin too. I also take some screenshots.
I don't know yet I'll like it... I will see next week.
I've put also the situation of my Today-screen before installing the plugin. Yes, I llike it simple and basic.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thats what you call clean
nypra1314 said:
Is this something comletely different as the HTC Audiomanager? I tried that one some time ago. Can I build the AudioM in this one?
Click to expand...
Click to collapse
I know there is a 6 tab version of the Home Plugin available as well where one of the tabs runs the HTC audiomanager. I have not been able to install it on my Neo, though.
Runs great on my wizard.
only one problem: The weather can't update its data from GPRS, only from WIFI. Anyone encountered that issue?
I was looking for a solution for the 6 tap version, here it is! umesh you 're good!
In version 6-tab there are more city's to choose than in the 3-tab version.
Two things to notice:
At Favorite People, if you don't have a picture of the person/company. It gives the first name.
The Music Player is just a shortcut to Windows Mediaplayer. It's a shame that the Music Player isn't a stand alone player. As you can see at my Homescreen, I use a SPB player. This plugin uses a less memory then the Windows Media Player.
kramerica2 said:
only one problem: The weather can't update its data from GPRS, only from WIFI. Anyone encountered that issue?
Click to expand...
Click to collapse
Yes, I've the same problem...
For the people who love pictures, here we go!
Itried it a lot of times to install it but nothing happens.I copy the files to my device, the run the two cab files, restart the device but there's no plugin. It just reserves the space to my today screen but i just can't see it.Any solutions?
It's a beautiful plug-in, but I will uninstall it. The plugin uses resources very much and everything is to reach double now (START). Standalone at startup my memory is 6 MB less!
Plugin eats resources
Sound-tab: this is at less than 1 cm to reach upper row
Favorite Contacts tab: this are shortcuts to the first tel.nr.
In speeddail you can choose your favorite nr of the person.
Music-tab: is just a shortcut to WMP, this eats resources. I use the Spb pugin. It don't startup WMP, but use the music list and setings.
pswnio said:
Itried it a lot of times to install it but nothing happens.I copy the files to my device, the run the two cab files, restart the device but there's no plugin. It just reserves the space to my today screen but i just can't see it.Any solutions?
Click to expand...
Click to collapse
You might want to just try
1. a neat uninstall first of any older copies of unsuccessful installation attempts.
2. Restarting your device.
3. Then try to install again following the steps as mentioned earlier. Make sure you install both the cabs to your device and not storage card if it asks you for that.
As a double check, you might want to check post installation that a bunch of HH_***.png etc. files are installed into the /windows folder of your device and it does not create any HTC Home folder in your device. If so, move all the files under HTC Home folder into the /windows folder and restart.
Hope you get it working !!
Black-Rose said:
[*]Music-tab: is just a shortcut to WMP, this eats resources
Click to expand...
Click to collapse
its not just shortcut to wmplayer its its own player, i can play songs on wmplayer and on that applications seperatly
at least not on mine it aint is say htc audio manager playes the misic its self (er.. i'm on pdaviet 4.0.0.6)
nypra1314 said:
Is this something comletely different as the HTC Audiomanager? I tried that one some time ago. Can I build the AudioM in this one?
Click to expand...
Click to collapse
You can have the HTC AudioM triggered by the audio tab in the 6 tab HTC modem by modifying the registry HKLM/Software/HTC/Music Plug-in/MusicPlayer to 2 for HTC AM. 1 is for WMP.
Have not tried this since couldn't get the HTC AM to work with my WM5. Let us know if this works for you.
Did anyone get the HTC Audio Manager working on WM5? I got the cab from the link below, but it just doesn't work. I get the 'trusted certificate' message when I try to run it. Please help!
http://forum.xda-developers.com/showthread.php?t=319308
[BT]Black V said:
its not just shortcut to wmplayer its its own player, i can play songs on wmplayer and on that applications seperatly
at least not on mine it aint is say htc audio manager playes the misic its self (er.. i'm on pdaviet 4.0.0.6)
Click to expand...
Click to collapse
So it doesn't startup WMP? At my device (WM5), it did.
yeah sorry i wasn't paying attention, I'm running htc the lot so mine has audio manager in it
kramerica2 said:
Runs great on my wizard.
only one problem: The weather can't update its data from GPRS, only from WIFI. Anyone encountered that issue?
Click to expand...
Click to collapse
I have the same problem and unfortunately no solution as yet. I did research on the net but to no luck. If any one has resolved this, please share.
I've uninstalled 3 times and checked files in windows folder, but nothing is displayed in the today's screen .... HELP. I've a WM5 prophet French version, as a guy installed it with other than a WME version (english) ?
This message just to report that 6tab version works perfectly on my Artemis (WM5 Italian - TIM). Just remember to rename MUI files on \Windows to match your country before soft reset the PDA (from HTC HDlg.exe.0409.mui to HTC HDlg.exe.0410.mui AND from HTCHome.dll.0409.mui to HTCHome.dll.0410.mui, since 0410 is the country code for Italy).
I also confirm that registry hack to use HTC AudioManager works (remember to rename mui files!)
Great works guys!
thank you very much i instal WM6 on my device but some of my friend look for this plug in for WM5
but a guestion what difrece between these two atachment ?
tnk you very much again
Matin said:
thank you very much i instal WM6 on my device but some of my friend look for this plug in for WM5
but a guestion what difrece between these two atachment ?
tnk you very much again
Click to expand...
Click to collapse
You are welcome, Matin.
The difference between the two attachments is that one of them shows 3 tabs for the HTC Home Plugin i.e. Time, Weather & Application Launcher.
The other is a 6 tab version where there are shortcuts on HTC Home Plugin for Time, Weather, Photo Touch dial, application Launcher, Profile switcher and Music.
I personally liked the 6tab version and am using that at present.

All you need on your Wing

After spent a lot of time research on this site, I finally got my T-Mobile Wing running in the way I want to.
I just want to thank you for all your efforts and timely responds. Without them, I will have my Wing, but can’t fly.
I also want to share all the CAB files and tweaking tips that I learned. Hope this can help people who are searching for them. They are as followed:
1. Change Page Pool Size; Thanks Paul and Slvrbllt
- Step 1: Download Quick Page Pool Size Changer.zip and extract the zip file.
- Step 2: Copy the ITSUTILS_Preperation.cab to the phone and run it.
- Step 3: Run “backup.bat” then run “6mb pool.bat”. ** It was suggested to run at 6mb but please use your own judgment.
- Step 4: Soft reset (re-boot) the phone.
2. Overclock
- Step 1: Download BatteryStatus.0.0.4.cab. Copy to the phone and run it.
- Step 2: Goto Programs --> BatteryStatus --> omap --> check all four boxes and chose speed to "247" and click on "set".
** I am running at 247 mhz. But I have seem some people overclock to a higher speed. Use your own judgment to do so.
3. Total Commander.cab – Registry editor
- Step: Copy to the phone and run it. ** the cab file WILL NOT be deleted after install. Please delete it manually.
4. psShutXP.cab – Soft restart tool (this comes really handy during the modification)
- Step: Copy to the phone and run it.
5. HTC Home 5Tab patched.cab - HTC 5 button screen -- updated on 09/11/07
- Step: Copy to the phone and run it.
** Just realized there is a proxy issue in updating weather. Please use the updated file "HTC Home 5Tab patched.cab". (Thanks for WarezApps and N2A. N2A's origional thread can be find at http://forum.xda-developers.com/showthread.php?t=319187)
6. HTC 10-Button Comm Manager.cab – HTC 10 Button Comm Manager
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
7. HTC Dialer Skin.cab – HTC dialer Skin
- Step: copy to the phone and run it.
8. HTC new Default.tsk – HTC black theme
- Step: copy it into \device\windows and it will be available in your theme selection.
9. Some registry editing – they has been tested and confirmed:
Increase Font Cache
HKLM/System/GDI/GLYPHCACHE/limit: 8192 => 32768
Increase File System Cache
HKLM\System\StorageManager\FATFS/CacheSize: 0 => 4096
Remove or modify the startup jingle on a soft boot
HKLM\SOFTWARE\HTC\StartupAnimation/Enabled: 1 => 0
Change Thickness of Scrollbars
(horizontal) HKLM\System\GWE\cyHScr: 13 => 9
(vertical) HKLM\System\GWE\cxVScr: 13 => 9
** Smaller number means thiner line. Not sure why changing this. I personally like 13 better.
Removing today screen tray
\HKLM\init\Launch92: Delete
Disable Video Size Limit
HKLM/Software/HTC/camera/P3/EnableRecLimit: 1 => 0
Move Temporary Internet Files to Storage Card
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache
\Windows\Profiles\guest\Temporary Internet Files => \Storage Card\Ie Temp\Cache (**there is a space in "Ie Temp")
Improve Speakerphone
HKLM/Software/HTC/AUDIOGAIN/EARPHONE_UPLINK_VOLUME: 19 => CC
HKLM/Software/HTC/AUDIOGAIN/RECEIVE_UPLINK_VOLUME: 00 => CC
** This boost the speak volume all the way but sound quality is really poor.
Allow Ringtones from Micro SD Card
HKCU\ControlPanel\SoundCategories\Ring\Directory:\Windows\ => \Storage Card\
** Need to create a folder on your SD card, named “My Ringtones” (Thanks for dakrnguy4u). Otherwise it won’t work
Above are what I have on my Wing. They are tested and currently running. However, please do this in your risk and there is no guarantee they will work on yours (I really don’t see the reason why, but you never know).
The only thing I can think it's missing on the Wing now is an "Auto Keylock" program. Can someone help me with this?
** Found and tested the Autolock program, Slide2Unlock. I posted a new thread about this on 09/07/07. Please see link below:
http://forum.xda-developers.com/showthread.php?p=1492548#post1492548
Finally, I apologize for the people I fail to mention. It was a lot of reading and testing in past few days. I couldn’t remember whose posting was and where I download from.
Hope these will help.
More files
If you would like to add, I have made all my first modifications today ever to my wing. I installed everything listed in my sig, all on stock tmobile hardware I received a week ago, running the version specified in sig.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice.. How do you do the screen shot?
I noticed when I installed everything it drained the crap out of my memory, now my phone is always low on memory!
Jacen said:
I noticed when I installed everything it drained the crap out of my memory, now my phone is always low on memory!
Click to expand...
Click to collapse
Not sure why it did that. They work fine on mine. I have like 12M program memory free.
Did you change the registry for "Increase Font Cache" and "Increase File System Cache"? Try to put them back to the default and see if it is still happening.
If it's possible, can you restore the phone back to factory default and start over? "Program" --> "storage clean". This will clean out all your files and start from the begining.
HELP
Do You Know How I Can Install The Iphone Theme On My Wing
Iphone on wing
Here's how you do it:
I tried it on my wing and it worked.
http://forum.xda-developers.com/showthread.php?t=317215&highlight=iphone+wing
How come once i overclock it and go to settings>system>device info>hardware it still says 201mhz but battery status says 247? is this normal?
Ieatkidz4lunch said:
How come once i overclock it and go to settings>system>device info>hardware it still says 201mhz but battery status says 247? is this normal?
Click to expand...
Click to collapse
yes, rely on what batterystatus tells you
ok thanks alot and thanks for this step by step guide!!!!
i cant get the temp files to go to my storage card, i change the registry but it changes back after a soft boot??
Ieatkidz4lunch said:
i cant get the temp files to go to my storage card, i change the registry but it changes back after a soft boot??
Click to expand...
Click to collapse
Make sure you have a folder called "Temporary Internet Files" on your SD card. It usually creates by itself but I am not sure why in your case.
I wish I had a SD card
GAH! ok, i deleted temporary internet files folder off of documents, and made one on my SD card. i changed the registry and it still resets back to the original instead of Storage Card\Temporary Internet Files like i had...
Ieatkidz4lunch said:
GAH! ok, i deleted temporary internet files folder off of documents, and made one on my SD card. i changed the registry and it still resets back to the original instead of Storage Card\Temporary Internet Files like i had...
Click to expand...
Click to collapse
Question:
Did you do "\Storage Card\Temporary Internet Files"?? or just "Storage Card\Temporary Internet Files"?? You need the "\" in front of Storage Card.
TylerC161 said:
I wish I had a SD card
Click to expand...
Click to collapse
how can u not have a microSD for your Wing. Having memory card with a pocket pc is essential. I suggest you stop driving your car for the next week and use the gas money to get atleast a 1gb....or you can be brave and go w/o a car for a month and cop the 4gb microSDHC.
I tend to get my memory cards before the phone even comes...what good is a WM phone if you can't cram it full with you favourite programs, songs, music videos, ebooks,etc.
>*DOH*< I didnt have the \ before storage card....changed to \Storage Card\Temporary Internet Files...softboot....didnt work... i have no idea what im doing wrong???
Yea, it does suck, but money is tight, and I need my car for gas to get to the job to keep making money, so I cant afford a card right now.
I had a 1GB in my pearl, but that fell off my car and was destroyed, I never found the card in the road.
Please Help
I installed SScontact and want to link or config it to the contact icon on the home screen but it keeps saying .Ink File Not Found!
i am trying to Link up the SSContact onto the Contact button just like you would link the icontact..
i found the .exe file for SScontact says ScrollingStone.exe
and in my config i have it to
\Windows\ScrollingStone.exe
Has anyone done this before or something similar
Can anyone Please shead some light over this !!

Noob questions about my T-Mobile Wing

Ok, first off, I just want to let EVERYONE know that I'm VERY new to the WM6 platform, having purchased a T-Mobile Wing, just recently. The phone was locked when I got it, but I used a sim-unlock service to unlock it. I've been working on Motorola phones for years now, so I'm not a total stranger to flashing, too. I've already successfully changed my slider tones and added a NES emulator to my Wing(which was all pretty basic, really), but now I'd like to start flashing some ROMS, particularly Touch-IT. My question: By flashing a new ROM to the phone, will it RE-lock the phone?
http://forum.xda-developers.com/showthread.php?t=383536
not trying to be an a**hole but kinda look around or search b4 posting
For a matter a fact, I DID do some searching b4 posting, and didn't run across the post you have so graciously pointed me to until after I had already posted a new thread. Sorry to have inconvenienced you, but I'd rather not mess my phone up, as I'm VERY new to the platform, as stated before.
Newbe also
Hey guy here's a few threads i ran across yesterday that were very helpful. unlike you it was shaky at first during everything but i did it. and cant wait to do more and learn more, and hopefully start writing my own if someone wouldnt mind helping me please....ill donate a few bucks to what ever for the held but here's the info:
TylerC161 said:
EDITS: 10/18/07 ADDED Wing OS's. In FAQ's Pt.2
Newbies Guide to Herald
Disclaimer: Please read ALL instructions listed for any item BEFORE actually following them. Make sure you have a good idea of what you're doing, and what you're supposed to be looking for. Im not responsible for any harm you may cause to your device following my steps. Anything I post here HAS worked on my Tmobile Wing and been tested.
Also, I have released a zip of everything needed to install a Touch IT OS. Check this thread here
I want to install a program, but dont know how to use .cab's
Its really easy.
1. Connect your computer to your device via USB
2. Explore your phones memory, and copy a downloaded .cab from the internet to your phone
3. RUN the .cab from your phone through the File Explorer
4. Whatever setup it is, it should complete, and it will delete the .cab afterwards to save space.
I want to backup my device:
Active Sync will back up your contacts, calendar, emails, notes, files and program data.
In addition, you can use PIMBackup for your Call Logs, Messages, Speed Dials, etc. and either Spb Backup or Sprite Backup for a full system backup (i.e. you won't have to reinstall all your apps as long as you restore to the same ROM you backed up from).
What are the different reset functions?
Soft reset - hit small circular reset button by volume slider(on wing) or bottom of phone (on Herald)
Hard reset - Press and hold both softkeys and press the soft reset button, continue to hold the softkeys til a prompt is brought up asking if you're sure you want to format. Press the call button to comfirm.
Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
How Do I Install With NBH Method
View this video here: http://www.gigasize.com/get.php?d=khbzp03s07f
I want to install touchflo, but I need more instructions:
Here are my steps I used to install touchflo:
1. Download which version of Touch IT you want. For the Last version made, here is the link: http://forum.xda-developers.com/showthread.php?t=340403
2. Backup any information you wouldn't want to lose. Either backup to memory card or PC; your choice
3. At this point, You need to install the official RUU for your device, if you're already running the official RUU, then you need to hard reset your device. (Press and hold both soft keys and press reset button, continue to hold softkeys til screen displays to hard reset. Press the call button to continue). If you need to install the official RUU, continue to step 3a4Here is a list of uploaded RUUs
3a. Enter bootloader on your phone (Hold camera button and press reset, continue holding camera until a screen with 3 gradient colors shows up
3b. Connect your computer via USB to your ppc (Pocket PC)
3c. Run the RUU .exe from your hard drive, follow its simple onscreen instructions and click check boxes necessary to continue with the installation. This should take a few minutes, and you will more then likely see your screen flash and change things, this is normal, let it work. After a few minutes it will boot up and go into "automatic customization of your device", I continued this (screen alignment, tips, auto setup), and waited for my device to be totally ready for me to use.
4. Connect your device via USB to the PC and wait for activesync. If it automatically pulls up a profile for your phones sync, delete that profile. If it asks again to setup device for syncing items, click cancel. You will still be able to explore your phone and install devices without setting up the sync profile for your phone.
5. Make sure your phone is connected as a guest, if it is not, make sure it is. The method I used to do this was this zip file I ran "guest only" registration entry. (Make sure and run allow partnership registration after completing installation), but it should display as guest after the hard reset.
6. Copy aserg policies.cab to your mobile device
7. Run aserg policies.cab from your device
8. Soft reset (use stylus for button on side of wing, or on bottom of herald)
9. Go into your comm manager on your phone, and disable "phone". Basically enter flight mode so nothing can be sent to your phone during this process.
10. Once booted, its time to give it a shot. Make sure you're still connected as guest, and run !Upgrade_rom.bat from Touch_it folder on your PC
11. This will bring up a command prompt waiting for you to hit a key to begin, press any key
12. During this time it is installing, NEVER touch your phone or play with it in any matter. It may look as though the command prompt has gotten hung up at times, but leave it run until it completes (or fails). your phone will pop up a message saying "unknown status" or the likes, but dont close that window, like I said just leave it alone.
13. If you have no error messages in the command dialogue box then you're ready to hard reset your phone. (press both softkeys, and press reset, continue holding softkeys til you see a dialogue asking if its okay to restore settings, hit the call button to finish it)
14. Your device SHOULD boot normally, go through setup, and you should be golden.
If at any time there is an error during install, but you still let it complete, you might have a chance at it working. Hard reset it after completion (even with errors) just to see if it works. If it wont go past your Tmobile or HTC picture screen on bootup, then you have bricked your device. To UNbrick it, run steps 3a through 3c and reinstall the RUU.
If you get any errors, try and try again. Its proven working on several devices.
How do you enable the cube?
Start > Programs > TouchFlo > TF Settings
Here you can change how it operates, or turn it off.
Here are the ways to activate it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This image is not from the TouchIT but tom codons Black&Blue for the Artemis
I want to sync my outlook contacts, but activesync doesnt work!
I have found a workaround for this.
1. set up a windows live account (if you havnt already)
2. at the windows live homepage, import your contacts from outlook to your Live account
3. set up email via your Wing, on step 4 it will allow you to sync with Hotmail and Live
4. contacts should sync
This is a "quick fix" to the real problem not being able to sync. Using this method will store them all on your SIM, and make it Lastname, Firstname (annoying to me)
Changing the HTC home plugin clock colors
select your color:
HTC Home Clock Aqua Glow Thread
HTC Home Clock Eblue Glow Thread
HTC Home Clock Matrix Glow Thread
HTC Home Clock Purple Glow Thread
HTC Home Clock Red Glow Thread
HTC Home Clock Yellow Glow
For me, all I did was copy and paste these files to my windows directory and soft reset. It worked after that! Matrix FTW!
I enjoyed this guide and it helped me solve my problem/questions I had. Is there a place to donate?
I would be happy to accept donations
All donations can be sent via paypal to: [email protected]
Click to expand...
Click to collapse
So, you were COMPLETELY stock and went straight to TouchFlo? BTW, thank you for the info!
Goodmorning...
yes i was stock, now i have the touchflo 2.3 with 6mb pool and over clocked 250 mhz and a few registry edits. i want to upgrade to the 4.4 version that they have out but not in no rush.....
Ok. Now I'm kind of confused. I've gotten to step 6, but when I unRAR the ASerg Policies, there are 2 files found within: _setup.xml and POLICIES.000. I move those files onto my Wing and them view them via my file explorer, within the phone. They look exactly like that, 2 files, not a .cab. So, I'm not sure WHAT I'm doing wrong here, but I'm doing something. Anyone?
are you sure theyre not a cab?
the .000 files are usually in cbs oh and the _setup.xml too.
you might want to save instead of opening when you download it
The ASerg Policies were in the TouchIT v2.3 folder, RAR'd. When I UnRAR them, all they are is the 2 files. Like I said, I know I'm doing something noobishly wrong, I'm just not sure what it is, LOL!!!
Monday bump!!!
Stop using tyler's kit ... its almost a year old... and outdated, as well as an outdated method of flashing.
HAHAHA!!! Holy noob!!! Soooooooo, Instead of UnRARing the ASerg Policies Archive, I just drug it onto the phone and the .cab worked! LOL! Brilliant. I'm going through the process, right now, to see if I can get TF to install, without bricking my Wing. Thanks for all of the help!!!
So far, so good! TF is up and running!!! For some reason, the cube feature doesn't seem to work, though. Any reason for this?
Anyone have problems using activesync? This is my third ROM install, each ROM being from a different developer... and activesync is still doing the same exact things to every single one.
To put a new ROM on I have to put the original T-mobile ROM back on, where activesync does work, then I repeat the new ROM install process. Still activesync refuses to work.
The grey circle turns green and when I click on activesync... It says connecting but eventually it will come up with the error and I can either press ok or troubleshoot. Basically the short error says no mobile device found.
Any help is appreciated thanks.
The420Dank said:
Anyone have problems using activesync? This is my third ROM install, each ROM being from a different developer... and activesync is still doing the same exact things to every single one.
To put a new ROM on I have to put the original T-mobile ROM back on, where activesync does work, then I repeat the new ROM install process. Still activesync refuses to work.
The grey circle turns green and when I click on activesync... It says connecting but eventually it will come up with the error and I can either press ok or troubleshoot. Basically the short error says no mobile device found.
Any help is appreciated thanks.
Click to expand...
Click to collapse
Reinstalling AS4.5 took care of my problems. It didn't work to repair the program. I uninstalled and did a clean reinstall....no problem now.

How do I install updates and .cab files?

HI, I have just got the HD2 and have been on the HTC website and found a variety of updates for my phone. I follow these instructions:-
"This update for HTC HD2 allows for contacts stored on your SIM card to be properly displayed on your phone along with Phone and Exchange Server contacts.
Installation Instructions:
Note: This update is only for ROM versions less than or equal to 1.59.XXX.X.
Follow the instructions below to download and install the Update on your device:
Make sure you have Microsoft ActiveSync® installed on your Windows XP PC or Windows Mobile Device Center on your Windows Vista® PC. You can find Microsoft ActiveSync from this link or Windows Mobile Device Center from this link.
Connect and synchronize your device with your PC via Microsoft ActiveSync® or Windows Mobile Device Center using the USB cable.
To download the Update, first select the check box below. Next, select the Update and the desired FTP site then click Download.
To install the Update, tap the RUU.exe file on your PC and follow the on-screen instructions.
DOWNLOAD: To download this software, please follow the steps below:
1. Please select the file most suitable for your device:
--Please Select-- Update for HTC HD2 SIM Contacts
2. Please select a location closest to you:
--Please Select-- Europe 1 Europe 2 US Asia 1 Asia 2 "
I save the file to my PC, but when I try to run the file I get an error message saying that the .exe is not a valid Win32 application. Can anyone help? I'm using Windows 7 Home Premium 64bit.
Also, if I'm in the UK should I be selecting Europe 1 or Europe 2?
Finally, if I want to install .cab files to my phone where do I store the files and how do I open them?
Cheers
I can't say why the hotfix isn't working. You just run it from the PC and it works. Try downloading it again, in case it got corrupted during download.
As for cab files, I personally keep all my cab files so I can install them again after the next ROM update. I've got an "installers" folder on my storage card, with subfolders for different installer types (games, utils, htc fixes etc.) and I put them in there. You just run them directly on the phone by clicking them.
A word of advice - unless you REALLY want something installed on your phone, install it to the storage card. These babies run out of device space very quickly once you start installing stuff, and there's things out there that you don't have a choice about.
I only install things to the phone if the phone would function differently without it. eg. Theme modifications and essential utilities etc..
Hope you get the hotfix working. Most hotfixes run on the phone, so you won't normally have this issue. Oh yes, you should be selecting Europe for download location if you're in the UK. As far as I'm aware though, that's just the server location, so you pick the closest one. It won't affect what you download. That's determined by what region the site recognises you as.
Good luck
I've tried downloading it again but get the same error message. Should I be transfering the .exe file to the phone, and open it from the phone, or save it to the PC and open it on the PC? IF I should open it on the phone, where do I find the file once I've transfered it?
All the recent hotfixes, apart from the SIM contacts one, are local files that have to be run on the device.
Copy the file to the device then locate it using a file explorer. Simply press the file name with your finger to run it.
NeilM said:
All the recent hotfixes, apart from the SIM contacts one, are local files that have to be run on the device.
Copy the file to the device then locate it using a file explorer. Simply press the file name with your finger to run it.
Click to expand...
Click to collapse
The one he's asking about is the SIM contacts one, so it should be run on the PC.
Sorry- misread the OPs thread!
NeilM said:
Sorry- misread the OPs thread!
Click to expand...
Click to collapse
Well to be honest the SIMS was just one example, you have helped me with the others so many thanks
Once I've installed the hotfixes can I delete the .exe files from my phone?
You can, but they are relatively small so would you gain much?
Store them on the Storage Card (you can run then from there as well) so if you ever have to do a factory reset, you'll still have the update files to apply.
NeilM said:
You can, but they are relatively small so would you gain much?
Store them on the Storage Card (you can run then from there as well) so if you ever have to do a factory reset, you'll still have the update files to apply.
Click to expand...
Click to collapse
Good thinking
At the risk of seeming like a complete idiot, I wonder if I could pick your brains for some help.
I joined your forums when I bought my HTC HD2 a few weeks ago, (I had been a Nokia man for the last 20 years) and have spent the time perusing your excellent forums for information whilst learning the telephone out of the box, and now I have decided to expand my knowledge a little and start installing some simple .cab files.
I have tripped at the first hurdle!
I thought I'd start with something simple like the 'torch'
I created a folder on my computer specifically for downloaded cab files, and created the same on my HD2, downloaded the RAR file, unzipped it to my computer folder, then grabbed it and set it into the folder on the phone.
All good.
Now, when I use 'file explorer' to find the file, I can open it ok and when I click 'setup', the screen goes white with nothing but a small black box in the bottom right corner with what looks like a usb outline and an arrow above it.
If i click that, it looks like it's trying to take me to a website!
Now bejayus and begorrah, I'm not a stupid person, but I am an old dog trying to learn new tricks, so if anyone can help in laymans 'idiot proof' terms what I am doing wrong, it would be greatly appreciated.
Fantastic forum by the way, even though most of the information passes clean over the top of my head!
Well just so any other noob is/was in the same predicament as myself, the answer as expected was very simple.
DO NOT unzip the RAR file containing the .cab file on your computer when you download it and then send the unzipped folder to your phone.
Go to the location to where Firefox (or whoever) downloaded it on your computer, then copy and paste the intact RAR zip file direct to your phone and open it there.
I knew the answer would be simple, but thankfully the kind people in another forum pointed me in the right direction.
I know it's blatantly obvious to many members here, in fact, you probably laughed at such a stupid question in the first place...... but please keep in mind that not all of us are computer geeks.
I'm a hairy arsed construction worker myself, and merely trying to keep up with modern technology.
And I do love trying!

[TMOUS][KITCHEN+ROMs][WWE]WM6.5 21892 & 24634 "Just Another T-Mobile HD2 ROMs"

[TMOUS][KITCHEN+ROMs][WWE]WM6.5 21892 & 24634 "Just Another T-Mobile HD2 ROMs"
"Just Another T-Mobile HD2 ROM v1"
Works with T-Mobile USA HD2's but T-Mobile junk removed.
Includes Kitchen
I used osKitchen Zero v1.32Alpha7 and dumped the 2.13 OEM ROM myself so I got exactly what I wanted to start with.​
I've created a Bunch of Packages myself, again, to get what I wanted. A few of the packages I've only modified to get them to work the way I want. The Folder Icon's are my work.​
I tried to keep it similar to OEM, but changed a few things to make it mine.​
I am ill, so I will not always be available to answer questions, but I will do my best. I do this to keep my mind on other things while I deal with my illness, be patient with me if you can. I am doing this in my spare time, so don't expect miracles. ​
Before Flashing, PLEASE backup your Data, and make sure you have Hard SPL 3 on your Phone.
Use This Tool from 'doloop' to complete a Task 29 on your phone. This will Format the ROM Space and clear any previous ROM code from your phone so you get a Clean Flash and less chance of errors on the new ROM. Simply connect your phone to your PC with the USB. Unzip the attachment and run the Exe file inside. When the Flashing reaches 95%, PRESS and HOLD the Volume Down button until it reboots and enters bootloader mode. Now you are ready to flash this ROM.
I will post the Self Extracting Kitchen, an RUU_Signed_0409.nbh, and an AutoFlash file.
What is AutoFlash you ask? I've taken the RUU file, added the Flashing Program, and Packaged it all up into an Auto Executing Auto Flashing Program, and, it's a smaller download than the RUU alone. Pretty cool huh? Yes, others have already done this, but I'm going to make it a standard practice from now on.
"AutoFlash (tm), Making Flashing Socially Acceptable, One Package at a Time!"
Run the AutoFlash file, or Flash using the Standard Flashing Program included in the Kitchen.
ROM Descriptions:
6.5 21892 with Start Menu at TOP​
6.5 24634 with Start Menu at Bottom
(Similar to Description Below except for the following changes. RAM FREE 290MB ish, STORAGE FREE 630MB ish. Compressed with LZX. Also, instead of Task Manager, it has Ameba. I modified it to work as follows: Tap Bottom Right to Close programs. Tap/Hold bottom Right for Task Manager. Tap Bottom Left for Start Menu. Tap/Hold bottom Left for Memory Screen.)​
Uncompressed
RAM FREE 302MB
STORAGE FREE 436.41MB
Added:
Facebook Tab (Must Enable in Tools Menu, Tap Twice) - By: meltwater
----http://forum.xda-developers.com/showthread.php?t=651007
HTC Wi-Fi Sharing - Hot spot
TripYzee Game
Skyfire
Connection Setup 3_1_20111826_00 With updated DB
HD2 Task Manager (Top Right X to Close)
PHM Regedit
PIM Backup 2.8
Soft Reset with My Red Icon
Total Commander 2.51
Enabled Solitare
Enabled Bubble Breaker
Removed:
Block Buster
Barns and Noble
Ferrari GT
Guitar Hero
Millionaire
Mobi TV
T-Mobile My Account
Mobile Backup
Prince of Persia
Slacker Radio
Teeter
Tetris
Tele Nav
Visual Voicemail
Old YouTube
Old Google Maps
Tweaked:
Keyboard Enhancement (Accuracy and Touch Response) - By: boogiecornejo
----http://forum.xda-developers.com/showthread.php?t=742445
Two Way Call Recording - By: 4pda.ru member RekGRpth
----http://forum.xda-developers.com/showthread.php?t=765555
Start Camera from Call Button (WP7'ish, Tap Green Call button Twice to start Camere, even if phone is OFF) - By: MilaCzeque
----http://forum.xda-developers.com/showthread.php?t=772961
Camera/Video Quality Tweaks
Personal Start Menu and Folder Icons
Personalized Home Tabs
Brought back Original Control Panel & Personal Settings
Stopped Deb Logger
Updated:
Latest Google Maps (Voice Searching)
Latest Bing (Voice Searching / FREE Voice Navigation)
Latest YouTube
I kept Opera 9.7 instead of updating to 10 for its Awesome Zooming, and Image Icon Tabs
Download Below: Files are in multiple parts to fit within MediaFire's Guidelines.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
21892
Self Extracting RUU File Download all three parts. Run the EXE file to extract the RUU.
AutoFlash File Download Two Parts and Run the EXE File to Automatically Flash the ROM. (This is the EASIEST way to Flash!)
Kitchen Download all Five parts and then Run the EXE to extract Kitchen. When you run the program, you can open the saved ROM in this Forum. It's called 'SuperSport Perfect'. BTW, that name was for my own knowledge as it was the one that worked perfectly. I know it's not really perfect.
24634 Possible Dialer Issue I will TRY to fix soon
Self Extracting RUU File Download two parts. Run the EXE file to extract the RUU.
AutoFlash File Download Two Parts and Run the EXE File to Automatically Flash the ROM. (This is the EASIEST way to Flash!)
Kitchen Download all Five parts and then Run the EXE to extract Kitchen. When you run the program, you can open the saved ROM in this Forum. It's called '24634 Test'.
23569 Possible Dialer Issue I will TRY to fix soon This has Threaded Email (Conversation View)
Self Extracting RUU File Download two parts. Run the EXE file to extract the RUU.
AutoFlash File Download Two Parts and Run the EXE File to Automatically Flash the ROM. (This is the EASIEST way to Flash!)
Saved for Future Use
Saved for Future Use
is this rom working? i used HSPL and i got it to 2.80 or something HSPL .... i installed rom and everything got stuck on Stick together screen :/ then had to get it back to stock rom.... what should i do?
Dantia said:
is this rom working? i used HSPL and i got it to 2.80 or something HSPL .... i installed rom and everything got stuck on Stick together screen :/ then had to get it back to stock rom.... what should i do?
Click to expand...
Click to collapse
I've flashed it around 30 times now during testing, and so far, it's fine for me.
You should see 'SPL-2.08.HSPL' on the Boot Loader Screen. Also, keep in mind this ROM is for the T-Mobile USA HD2. I am not sure if it runs on the International versions.
If you have that, then you should use the Task29 file in the first post. Remember to hold down the Volume Down button around 95% and keep holding it till the phone reboots into bootloader again. Then flash the ROM.
I have not flashed from the uploaded files yet as I'm still trying to get them all uploaded. MediaFire was having trouble last night, so possibly a file got corrupted? I'll be testing them shortly. Files are now Confirmed Working.
95%? you mean when screen Shows the Big HTC and then percentage below it? then i should use those buttons?
Dantia said:
95%? you mean when screen Shows the Big HTC and then percentage below it? then i should use those buttons?
Click to expand...
Click to collapse
When you are flashing the TASK29 file. When it reaches 95% Completion, hold the Volume Down button until it Reboots into BootLoader Screen. (Red, Green, Blue Screen) When flashing Task29, NOT when flashing the ROM.
After rebooting into BootLoader, it should be ready to flash the ROM.
Has anybody else flashed this yet? Any additonal input so I know if I have a corrupt upload?
EDIT: I'm downloading it now and test flashing it to verify.
EDIT: See post #8 below
No i mean cause i got a big Black Screen and in middle of it says HTC Big Fonts... below it loading crap... 95% and then i press them on that screen till i get 3 color one? hmm think i got it tell me if it works ... doing a raid in World of Warcraft atm
Confirmed Working
I just downloaded the Self Extracting RUU file and flashed it. It worked fine. Keep in mind that the First Boot took 1 1/2 minutes to finish. Be patient...
I just downloaded the AutoFlash file and flashed it. It worked fine.
I just downloaded the Kitchen, and it extracted fine.
All seem to be working fine. Please let me know if you get different results.
you know the first time u use the tool u have a put a link in here? it goes to 95% almost instantly i use Volume down and Red buton.... nothing happens and now i am again stuck on Stick together
Dantia said:
you know the first time u use the tool u have a put a link in here? it goes to 95% almost instantly i use Volume down and Red buton.... nothing happens and now i am again stuck on Stick together
Click to expand...
Click to collapse
When using the Task29 tool, it will go to 95% almost instantly. That is normal. ONLY hold the VOLUME DOWN button at 95% and continue to hold it until the phone reboots into BootLoader. THEN flash the actual ROM.
It sounds like you sucessfully flashed Task29. If you are still on the Stick Together screen, open the back of your phone and hold down the Volume Down Button while pressing the Reset Button. This will put you into BootLoader mode so you can flash the ROM.
When you flash the actual ROM, it will take a few minutes, like other ROMs.
do i have to do that aswell with Autoflesh?
Dantia said:
do i have to do that aswell with Autoflesh?
Click to expand...
Click to collapse
No. Holding down the Volume Down button is only for the Task29 step. Flashing the ROM is like normally done with other ROMs.
If you want to try the AutoFlash version, just download the files. Connect your phone to your PC via USB. Run the AutoFlash file and follow the directions.
Ok,i got it working yeeeeeeeeeh! but aswell Windows Live not working aswell youtube program since i dont have my country but i will remove it somehow and replace with older or newer version.... other works very good thanks.... Cheers had some problems during installin first few times but now it's just great cheers!... if u have solutions for this youtube and windows live since i cant set up my mail and i am a bussinesman )) woulkd be good
Dantia said:
Ok,i got it working yeeeeeeeeeh! but aswell Windows Live not working aswell youtube program since i dont have my country but i will remove it somehow and replace with older or newer version.... other works very good thanks.... Cheers had some problems during installin first few times but now it's just great cheers!... if u have solutions for this youtube and windows live since i cant set up my mail and i am a bussinesman )) woulkd be good
Click to expand...
Click to collapse
Good to hear it's working.
Are you able to run those programs on Other ROMs?
ah well i didnt have this version of yoitube either windows live.... but ye worked fine back there....both of them.... it could be just the program it self...not rom... tell me if u find solution... sorry for mistakes atm from phone
aswell its ur rom that is first.i fleshed..... so i dont know about.other.roms
Polish language exist in this rom?
downloading now
You gonna make a 23x version?
So do you maybe got a link to download the Youtube and Windows Live Application from T-Mobile Stock Rom? Cause that's the two of apps i most use,other then that everything works fine...
Here they are. (Live is attached below)
You Tube v2.6 - http://www.megaupload.com/?d=4CFRB1QC

Categories

Resources