hi all,
i flashed my rom to the new meschle 4.01 rom but the cube does not initiate, does anyone know about this problem? ideas / suggestions?
Sometime it work, but I don't know how to active it.
cube?
Pardon my ignorance, but what does a cube do?
Cube won't initiate
RAF_SHC said:
Pardon my ignorance, but what does a cube do?
Click to expand...
Click to collapse
The cube is an interface from the HTC Touch that is basically a four sided launcher that rotates according to the user's gesture.
anyways i found the problem, thanks for the concern, all you need to is change the initiation settings in touchflo to top-to-bottom, that way it doesn't confuse with softkeys
Related
hi, i'm new to this forum and i have just managed to upgrade my Artemis to the Artemis Touch 4.02 Full with 4 sided cube rom... but here's the problem...
i have no idea how to work/activate the touch flo and the cube...
somebody please help me....
again, sorry for the noob question...
just go to start/settings/system and the the touchflo icon
click and set the settings
then it should work
greetz Hatchy
thanks... but i still can't get the cube to work...
swipe your finger from top to bottom
and not from bottom to top
Can anyone explain me how to customize TouchFlo buttons in my Jade? With Advanced Config Tool this operation is impossible. It's appear some error when I try to enter in TouchFlo3d menu
Hi there,
I'm also intrested in adding new tabs to TF2D, is there any possibility?
Cheers,
ratsche
ratsche said:
Hi there,
I'm also intrested in adding new tabs to TF2D, is there any possibility?
Cheers,
ratsche
Click to expand...
Click to collapse
I do not think new tabs can be added to TF2D. However tabs can be disabled and position changed using M2DC by Mpenguin 14.
Pls look here http://forum.xda-developers.com/showthread.php?t=427392
thx for your answer, maybe I'll give it a try.
Atm I'm playing around with the spb products They seem to be quite nice as well
Regards,
Hauke
Hey guys,
As the title says Ive got a very annoying problem with my xperia. Problem is that the right function keys (silver one) assigned action always changes from "right function key" to "Today" upon restart.
Id like to not do a hard-reset if possible. Anyone got any suggestions how to make sure it sticks with what action I assign to it?
Cheers
Agaas said:
Hey guys,
As the title says Ive got a very annoying problem with my xperia. Problem is that the right function keys (silver one) assigned action always changes from "right function key" to "Today" upon restart.
Id like to not do a hard-reset if possible. Anyone got any suggestions how to make sure it sticks with what action I assign to it?
Cheers
Click to expand...
Click to collapse
sounds to me like the assignment isn't "sticking" in the registery and goes away after restart. try a registery editor and manually assign the key to the program you want.
Agaas said:
Hey guys,
As the title says Ive got a very annoying problem with my xperia. Problem is that the right function keys (silver one) assigned action always changes from "right function key" to "Today" upon restart.
Id like to not do a hard-reset if possible. Anyone got any suggestions how to make sure it sticks with what action I assign to it?
Cheers
Click to expand...
Click to collapse
i have the same problem. do you have tf3d installed ?
yes I do have tf3d installed. which registry key should I change?
I have the same problem. In addition to tf3d I installed the cab that enables to make a panel out of it. Help?
Use AEBPlus to re-assign the key(s). For each hard keys, you get 4 different actions. You will appreciate what u can do with the hard keys!
Also mine after installed touchflo3d.
Guys, remove TF3d! We have a Xperia, X-panel is more than enaught.
gohyc said:
Use AEBPlus to re-assign the key(s). For each hard keys, you get 4 different actions. You will appreciate what u can do with the hard keys!
Click to expand...
Click to collapse
doesn't work in my x1. something keeps changing the registry value back ... :-(
yep I had this problem too when I installed TF3D. In the end I uninstalled it because I wanted the right button mapped to voice command and it got annoying having to remap it after every soft reset
if someone has successfully stopped it automatically setting it to "today" please tell us how
I am using Touch-HD Manilla instead of TF3D and don't have this problem. Why not use Touch-HD Manilla instead? From what I read, this is faster than TF3D.
gohyc said:
I am using Touch-HD Manilla instead of TF3D and don't have this problem. Why not use Touch-HD Manilla instead? From what I read, this is faster than TF3D.
Click to expand...
Click to collapse
which cab are you referring to ? if you can point me in the right direction i'd be grateful ...
http://forum.xda-developers.com/showthread.php?t=442154
Post 1, Manilla HD Full
or
Post 2 Manilla HD, components
I have only so far installed Manilla HD Full, and have never tried the the individual components.
Interesting, I have this too, and I also have TF3D installed as a panel...
NZtechfreak said:
Interesting, I have this too, and I also have TF3D installed as a panel...
Click to expand...
Click to collapse
and you're using manilla hd full ?
Yes, am using Manilla HD Full. Also installed the T3FD panel, but later removed it.
I am on ROM 1.02 (was on ROM 1.01 also) by Jack Leung, AEBPlus works on both with Manilla HD Full installed. Didn't bother to install the panel.
I have Touch HD,but I also have this problem,why...
Just curious, are you on the original rom?
I understand some ROMs, the email signature also doesn't get saved. Wonder if this is a related issue.
Ive heard that there is a version of Manila 2D that can be used while still keeping the cube? If anyone knows the link to get this version, can you please share.
Thanks!
BTW: I have a Niki 100 if that helps.
it depends on biotouch.exe version.
If you use original one (That come's with original niki's rom), you can use manilla and cube both.
M2D All Devices (Version 19b), it keeps your cube working as usual
u can find it here
ingerasu said:
M2D All Devices (Version 19b), it keeps your cube working as usual
u can find it here
Click to expand...
Click to collapse
hi, the manila is running with some small problems, but how I can switch back to the original htc screen? Is it possible to switch between manila and htc screen?
There is one little programm for it, but i forgot the name
lions123 said:
hi, the manila is running with some small problems, but how I can switch back to the original htc screen? Is it possible to switch between manila and htc screen?
Click to expand...
Click to collapse
with the old version (0.07), u can choose between manilla homescreen and htc homescreen. But in this version, the cube runs very slowly
ingerasu said:
with the old version (0.07), u can choose between manilla homescreen and htc homescreen. But in this version, the cube runs very slowly
Click to expand...
Click to collapse
thanks for the info, but I changed now to the "Clean Black 2 Reloaded Office - Manila2D Special" Manila2D German
This was a very good job from animelover, and it is ok for me. Previously I could not perform any call, but this could be solved after changing to the correct radio version.
So I have no cube, but a Manila2d german version
lions123 said:
hi, the manila is running with some small problems, but how I can switch back to the original htc screen? Is it possible to switch between manila and htc screen?
Click to expand...
Click to collapse
Under Settings>Today>Items. Untick TouchFlo and Tick Today!
Does the TouchFlo3D Cube work on the HTC Touch hd?
I found a Registry string and iam afraid of activating it
greets
whats the key?
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings\
DWORD
EnableCube
1
greets
I know that on the KAISER it doesnt do anything, but maybe on the blackstone?!
that key does nothing as i can see, gonna try and install a few cubes see what happens
edit:cant see it working though as there isnt a VGA or QVGA version that i can find
thank you for testing =)
I really must install a backup program that i can test on my one
thanks