Related
I have had my K-Jam for a month now and I love it, but I find the phone part of it very inconsistent.
1) voice quality is inconsistent, some calls great some have static or are muffled
2) Bluetooth connection gets dropped out of the blue. I make a call and it works fine, two mintes later I answer a call and I can't hear anything; I look at the phone and I notice that the BT headset icon is off so I pick up the phone and I can hear the voice on the phone but not ont he BTheadset
3) Speaker volume very low, not usable for me; is there a setting I can use
4) when I roam to the US from Canada the signal strenght bars disappear and I have to reset the device (sometimes 2 or 3 times) before the bars appear again
5) lastely, sometimes the phone just turns itself off out of the blue.
Anyone else encouter any of these issues?
I use my phone for business and I find it a pain that it is so inconsistent.
Are there settings/registry keys I can modify to fix any of these?
Thanks
not much help to you,
but i have had none of the problems you have listed,
sorry i can't help
for (3) volume low.
I notice that handsfree (aka using internal speaker for public audience) is not "activable" if my bluetooth headset is connected (and even if I previously disconnect"tranfer" BT hS to 9100).
Only way to have this handsfree, is to shutdown previously by BT headset.
For other nothing special Roaming works well for me between France-Belgium.
André
for (3) volume low.
I notice that handsfree (aka using internal speaker for public audience) is not "activable" if my bluetooth headset is connected (and even if I previously disconnect"tranfer" BT hS to 9100).
Only way to have this handsfree, is to shutdown previously by BT headset.
For other nothing special Roaming works well for me between France-Belgium.
André
I am having phone app problems, but not the ones you describe. I have to reboot sometimes because the phone will not dial from contacts. I highlight the contact and try to dial, but it just doesnt do anything, like the button is
not being pushed. Afte a reboot it works ok again.
Anyone else?
John
I'm having the very same problems, I'm also with Rogers (in Saskatchewan). Have you had any success fixing the issue?
Devon
jastorino said:
I have had my K-Jam for a month now and I love it, but I find the phone part of it very inconsistent.
1) voice quality is inconsistent, some calls great some have static or are muffled
Click to expand...
Click to collapse
This sounds like a carrier/ signal issue. See if you can tell how strong your signal is when things like this happen. Here in Nashville, TN USA, I don't have this problem.
jastorino said:
2) Bluetooth connection gets dropped out of the blue. I make a call and it works fine, two mintes later I answer a call and I can't hear anything; I look at the phone and I notice that the BT headset icon is off so I pick up the phone and I can hear the voice on the phone but not ont he BTheadset
Click to expand...
Click to collapse
I don't have this problem with my Motorola HS820. The BT performance is perfect. Much better than on my Blue Angel.
jastorino said:
3) Speaker volume very low, not usable for me; is there a setting I can use
Click to expand...
Click to collapse
If you're referring to the speaker phone, there seems to be a quality issue with the speaker phone right now. A lot of people are reporting problems with this feature. I'm hoping a ROM upgrade will come out to help address the issue.
jastorino said:
4) when I roam to the US from Canada the signal strenght bars disappear and I have to reset the device (sometimes 2 or 3 times) before the bars appear again
Click to expand...
Click to collapse
This is definitely a signal/carrier issue. Soft resetting when you cross the boarder isn't unreasonable. The issue is your cell phone registering on the roaming network. You're doing the right thing to resolve the issue, here.
jastorino said:
5) lastely, sometimes the phone just turns itself off out of the blue.
Click to expand...
Click to collapse
Do you mean the cellular radio turns off, or the device sleeps? If the cell radio turns itself off out of the blue, its not supposed to do that, and there may in fact be something wrong with it. You may want to look into getting it either repaired or exchanged (depending on how long you've had it...)
I haven't had any of these problems with my K-JAM. Its been working very well, and I'm VERY pleased with the way its been working.
I hope this helps. Let me know if you need additional help.
I have a Cingular 8125 paired with a Plantronics 320. When I answer an incoming call with my bluetooth headset, the other party hears static while the headset establishes a connection. Once the connection is ready, the static disappears. It only lasts for a second or so, but is highly annoying to the other party. Has anyone else experienced this or have a solution? This also happens with my old Tekkeon BT headset, so I know it is a phone issue. Thanks!
Are you using both ring and vibrate at the same time? Perhaps a custom ringtone?
If so, I have had the same situation. Unfortunately, the only solution at the moment that I know of is to turn off the vibrate, or don't use Bluetooth.
I submitted this to HTC a while back after experiencing it on my 8125, and an 8125 I had to replace it.
EDIT: I've only tested it with two 8125's, and a Samsung WEP150 and Motorola H810 (I think) headsets..
Also, as an experiment, try calling yourself from another phone, and answer with the headset. What you'll likely notice is that the static goes away as soon as the vibrating stops.
sk0t. Thanks for the reply and info. It sucks that we have to disable vibrate. I'll give it a shot and see if I don't blow out my friends' eardrums.
*UPDATE*
That did the trick. Thanks.
psychotron said:
*UPDATE*
That did the trick. Thanks.
Click to expand...
Click to collapse
Suspected it might. It certainly does suck that we have to disable vibrate when using a BT headset. Drives me nuts actually.
When I went through and discovered this (haven't seen reference to the issue anywhere in my searches), I had tested with something like 3 different headsets and two 8125's.. Was able to duplicate it every time once I figured out what the cause was.. Very very strange..
I just hope that HTC can do something with this issue on these phones..
Wish I had found this thread a couple of weeks ago. I went through 3 Plantronics 510 headsets and two Cingular 8125 before making the discovery that the problem was tied to the vibrate ringer setting.
One thing I've done--since I'd still like the vibrate feature--is you can set the ringer to "vibrate then ring". I just have to make sure I don't pick up while the handset is vibrating--which isn't too hard since that usually is just the first caller's ring.
Another think I found when troubleshooting: if I put my handset in another room and pick up incoming calls everything is fine. Seems like the vibration needs to be in proximity to the headset for this problem to occur.
hmm i just got my bt headset and was told of the static...
thanks for the info guys will deff turn of the vibration to see if that prevents the static when answering a call
I nearly always use a BT headset for calls since the Wing is a pain to hand hold while talking.
Nearly all people I talk to complain of a "screetch" type of sound when I answer a call with my BT headset. I've tried three different headsets, same result. The noise does not happen when I initiate the call, and I cannot hear the noise when I answer the call. at frst I thought it was just a one time event, but callers tell me the problem is consistent and loud enough that they keep their phone away from their ear when I answer.
Using a stock Wing (TMO factory ROM) with either a Jabra BT500 (most of the time), a Plantronics 590 or a Plantronics 6xx headset, same result with all.
Anyone experience similar or have ideas how to resolve?
Noone has mentioned it to me yet (just got my wing yesterday) but my MDA definitely did that on occassion. Only did it when it was on vibrate too...I think people were actually hearing the mechanical vibration on their end. And it only happenned via BT...which made it even stranger since that meant the mic wasn't even part of the phone.
Amazing, that's exactly what the problem was!
Apparently even when you answer via BT, the internal microphone is enabled for a second or two and it picks up the sound of the vibration motor.
Thanks for the advice, now to gripe to TMO or someone about the problem for what it's worth.
my mda has been doing the same thing for the past 2 days... but on all calls incoming and outgoing without the bt and it starts up with the bt but stops after a second.. is there anything to do to fix it?
I didn't want to open yet another Polaris bluetooth problems but none were like mine.
I have the O2 Orbit 2 and I had bluetooth mute problems which were usually resolved with soft reset, I think that ever since I installed HTC's official bluetooth mute fix the mute problems got worse.
Every couple of calls or when I plug something to the mini usb (ear phone, charging, data, etc') my bluetooth is muted, the connection is established and I think I do hear through it but with extremely low volume (less then a whisper, more like back ground noise) the mute almost never fixes itself, it goes on even if I flash with a different ROM!!, what fixes it is playing with turning on and off the connection to the headset while in call or, while in call pluging and removing the wired headset, once it's back, it usually stays ok until (randomly) when I plug something to the usb, at first I though it will never work again (flashing something like 10 different roms...) but this fix is less then convenient, again, sadly the official fix doesn't help.
Anyone knows the return policy to O2 from Germany? I live at Israel so I think it might be a problem...
Same problem for me.
After the original fix, my bluetooth headset is always mute.
I have ordered a new original HTC M200 headset. I hope it will work............
Original M200 arrived today.
Don't work. Always mute.
I have tried to uninstall the original fix without any resultate.
Did you get yours to work?
You can try the on/off trick, I usually call my voicemail when the mute starts and then goto options and turn handsfree off, then again turn it on, sometimes it works after 4-5 tries sometimes after 2-3 minutes...
Sometimes the voice comes back in slow motion!!, I thought at first that it was garbled, but once I have a voice mail of a woman who talked fast so when the voice came back in slow motion she sounded like a very low voice slow talking man.
no, don't work on any headset......
It's a hardware problem ??
Hey guys...just wondering if you guys found a solution to this problem. I have this problem with my touch pro. The A2DP works, but for some reason handsfree through bluetooth is muted and I can't unmute. Hope you guys found a fix and can help me out.
Hey folks,
I've been struggling with this issue for months now and couldn't find a solution yet. Had the same problem with my Polaris before.
When using BT Handsfree profile, either with my Jabra 250 headset or with my built in car handsfree (Parrot) I get a more or less big delay after accepting a call until the audio stream is transferred from my phone to the BT device.
Meaning, accepting the call in the car results in like 5 seconds delay until I can actually hear what the person on the other end is saying. Until then the voice is still routed via the phones builtin speaker, as if no BT device would be connected.
Same happens with my Jabra headset, though the delay is less there. Maybe 2-3 seconds sometimes.
I tried playing around with Shaps Advanced Config or HD Tweak Bluetooth settings, but no luck so far :-(
Could anyone who is using BT handsfree devices, especially car kits, tell me if you get your audio on your BT device right away, without delay on your BT device? If yes, please tell me exactly what settings you are using for your BT on the phone, e.g. Bitpool min/max, Audio Gateway on/off, Joint Stereo Yes/No etc.
Please let me know if ya using S2U2 as well, I think this could add up to the problem, though for me I still have the issues when I disable S2U2
thanks,
boba
i am using a Bury comfort BT and it rings 2-3 seconds b e f o r e my phone rings! i did not tweaked any settings in my HD. i am not using s2u2.
I also have a Parrot in car hands-free system. Have to say, whilst there are and have been some 'issues' (from time to time) a long delay when an incoming call is accepted isn't one I get.
I don't have the 2 programs you mentioned, as I'd not heard of them before - so I'm running my HD (as far as BT goes at least) in stock trim - FYI I have the auto-answer selected (in 'Settings>Phone>More') set to talk after 4 rings, as a personal pref.
I do have issues with the BT on these phones - I think it's a WinMo thing though, as it's been the same on all the WinMo phones I've had - the BT is pretty retarded unfortunately and it's the one major gripe I have with it and ultimately 'put up with' (very begrudgingly, as it's a feature I use a lot)
Issues are;
Occasionally the phone will answer instead of the car kit (if it's in my pocket - although I may have solved that by having pocketshield 'slide to answer' on there now)
It will NOT auto-answer at all on my BT stereo headphones NOR [more annoyingly] my Scala-Rider motorcycle helmet kit (where every other 'normal' phone I have had has done so with no issues at all)
Every now and again it will freeze the car-kit by showing that there is an active call, when there isn't - and the only way out of it is a soft reset of the HD itself
I only wish there was a fix/tweak for the BT in WinMo - but it seems that most programmers don't see this as a priority area and as such it's not been resolved - maybe 6.5 will address it...but I'm not holding my breath!
Hello, same problem with my Motorola bt350, with and without s2u2.
Same with stock ROM or with dutty's ROM and other.
Its a known win 6.1 BT stack issue.
Regards
T
@ boba23
If you find a fix for that issue please tell me!!! its so annoying
T
Same issues here. Anyone find a fix.
thought it was mine in car blue tooth that has this problem...good (or bad?) to know that it's not an isolated incident.
same issue...
I have parrot MK9000 and HTC BH S100 (stereo). The delay is the same. I do not think there is going to be a solution.
Ι have the transfer delay BT issue here too.... the others person voice is going out from the phone for 2-5 sec and suddenly its transferred to BT heasedet.
Preety annoying, it happens to all my ΒΤ headssets (Jabra , Samsung) the dead seconds just varies.
Plz guys anyone who has solved this let me know
boba23 said:
Bumping this thread up again, since I am still facing the delay issue. I am pretty sure it's not ROM related, since I had this issue with all 6.1 roms I tried. Right now using Topix 2.7.
Played around with Advanced Config BT settings again, but I still have that incoming call delay with my Jabbra BT250. Mostly takes 3-4 seconds, after accepting an incoming call till I hear sound on my headset. I really can't believe that this is an issue that only a few ppl are facing. I have nothing spectacular installed, even disabled S2U2 to see if that helps, but nothing :-(
boba
Click to expand...
Click to collapse
I think this has to do with a combination hands-free / rom version. I have a built in car kit and if I accept the call with phone answer I get the voice right away on the car kit. If I accept it on the radio, it will take 2-4 seconds before sound is transferred to car kit.
I've made another test on a parrot car kit, with same ROM version as before, and it behavior was diferent. If I accept the call on the car kit button, the sound is transferred immediately to the car, if I accept the call on phone button, I get instant sound, but on the phone - private mode....
I made also this test with a plantronics headset, and the sound is transferred right away to the headset either I accept the call on the headset or the phone
so
I am using topix 2.9.4 6.1 rom version - but already tested with several 6.1 roms and 6.5 - behavior is more or less the same
boba23 said:
Bumping this thread up again, since I am still facing the delay issue. I am pretty sure it's not ROM related, since I had this issue with all 6.1 roms I tried. Right now using Topix 2.7.
Played around with Advanced Config BT settings again, but I still have that incoming call delay with my Jabbra BT250. Mostly takes 3-4 seconds, after accepting an incoming call till I hear sound on my headset. I really can't believe that this is an issue that only a few ppl are facing. I have nothing spectacular installed, even disabled S2U2 to see if that helps, but nothing :-(
boba
Click to expand...
Click to collapse
Hi Boba, you're not alone I use BT sometimes as a backup.. and I too have an annoying delay of several seconds... at that very moment I think "hey where's the incoming call", I then hear the sound from the normal phone speaker, and when I switch to the normal phone again the sound is passed to BT ....
Bluetooth Incoming Call Delay
Has anyone come across a solution for this yet?
I have always had a 1-2 second delay in being able to hear the caller using my BT250 headset but, after installing the Orange update ROM, the delay seems to have increased to 3-4 seconds. The caller can hear straight away though.
I have just purchased a BT2020 headset and the delay is still 3-4 seconds.
I am not confident in installing different ROMs (because of my limited knowledge) but would install any that will eradicte this really annoying delay. Any suggestions?
alanu said:
Has anyone come across a solution for this yet?
I have always had a 1-2 second delay in being able to hear the caller using my BT250 headset but, after installing the Orange update ROM, the delay seems to have increased to 3-4 seconds. The caller can hear straight away though.
I have just purchased a BT2020 headset and the delay is still 3-4 seconds.
I am not confident in installing different ROMs (because of my limited knowledge) but would install any that will eradicte this really annoying delay. Any suggestions?
Click to expand...
Click to collapse
Just spoke with Orange Technical Helpdesk and they are sending me a new handset.......will publish result.