Related
Hello,
I have HTC Touch, and I'm trying to connect to wifi with ISA proxy.
First, I connected to home wifi (no proxy) and accessed internet without problem.
At work we have Radius etc. but I also connected, and I can surf to pages inside company (no need for proxy), but I can't get out to internet.
Any suggestion would be great!
tnx
small update: looks like I was surfing at work through usb cable, not wifi. But now I can't even connect to wifi at work, which I could before. Funny things going on, I'll reset.
Update2:
Newest status is: wifi connected, can surf internal sites, but can't go outside company network.
I suspect that IE is not going through the proxy at all. Which implicates that I don't know how to setup IE to use proxy on WM6???
If you edit "My Work Settings" thru Settings -> Connections -> Connections you can edit the proxy settings there. Then you say "connect to internet" thru "My Work Settings". I may be wrong, but I think you need to reset the pda as well...
OK, here are my settings:
under settings-connections-connections, advanced - select networks:
"Programs that automatically connect to Internet should connect using:" My Work Network.
When I click Edit, under Modem, there are no entries.
Under Proxy settings, "This network connects to internet" and "this network uses a proxy.." are both checked.
"Proxy server" field is disabled.
Under Advanced:
Socks line has serverort next to it. Others are empty. Server and port are good.
I click ok on all and go to IE. Type www.google.com, it says "Locating.." and that's all. Internal web sites are opening ok.
I tried to turn it off, and back on.
Tried google, not working.
I checked all settings once again and tried then, still nothing.
This is a common problem and I have not found a solution for it myself yet.
The proxy settings are lost when you apply them, and the SOCKS server settings behaves weirdly.
Anyone knows what can be done?
i want to know how to do this too... my school is also using the same system.
still no update
no update ??
configfree from Toshiba
Dear,
I had an old E800 from toshiba where configfree is installed. With this program I can configure proxy for wifi in 10 sec and it works.
does someone know where we can find this program for other PDA. I want to try it on my Cruise.
Vincent
I'm also having the same issue. Can anyone help, please?
From my experiences I can tell you: THERE IS NO WAY TO MAKE HTC AND HTTP PROXY FOR WIFI RUN. Neither with WM6.0 nor 6.1 nor a special brand nor the original firmware.
I have tried to inform HTC support, but I'm extremely pessemistic, that at least one will care. It seems to be not a WM related problem, because my WM6 ASUS doesn't have that issue.
There is a work around for browsers only: Don't use Pocket IE, use Minimo, because this browswer has it's own proxy setup. But it doesn't help you much, if you want to use other applications.
EDIT: Just to inform you, what happens, if you upgrade to WM6.1: The proxy settings are kept (HURRRAY) ---- but ignored completely It's _that_ brain damaged...
Regards
neil.young said:
From my experiences I can tell you: THERE IS NO WAY TO MAKE HTC AND HTTP PROXY FOR WIFI RUN. Neither with WM6.0 nor 6.1 nor a special brand nor the original firmware.
I have tried to inform HTC support, but I'm extremely pessemistic, that at least one will care. It seems to be not a WM related problem, because my WM6 ASUS doesn't have that issue.
There is a work around for browsers only: Don't use Pocket IE, use Minimo, because this browswer has it's own proxy setup. But it doesn't help you much, if you want to use other applications.
EDIT: Just to inform you, what happens, if you upgrade to WM6.1: The proxy settings are kept (HURRRAY) ---- but ignored completely It's _that_ brain damaged...
Regards
Click to expand...
Click to collapse
I can confirm the same "symptoms": proxy is totally being ignored on WM6.1. However, they're kept when you close the settings.
neil.young said:
From my experiences I can tell you: THERE IS NO WAY TO MAKE HTC AND HTTP PROXY FOR WIFI RUN. Neither with WM6.0 nor 6.1 nor a special brand nor the original firmware.
I have tried to inform HTC support, but I'm extremely pessemistic, that at least one will care. It seems to be not a WM related problem, because my WM6 ASUS doesn't have that issue.
There is a work around for browsers only: Don't use Pocket IE, use Minimo, because this browswer has it's own proxy setup. But it doesn't help you much, if you want to use other applications.
EDIT: Just to inform you, what happens, if you upgrade to WM6.1: The proxy settings are kept (HURRRAY) ---- but ignored completely It's _that_ brain damaged...
Regards
Click to expand...
Click to collapse
Proxy over WiFi works for me and has done with my previous HTC Wizard and now with my Kaiser. I have checked with a sniffer that I am definitely using the proxy over port 8080 (MS ISA 2006).
I have explained this before but this is how my device is setup.
ActiveSync/Windows Mobile Device Centre - Connection Settings set to 'This computer is connected to: Work Network' - Setting this to Automatic or The Internet deletes any Proxy Settings on the device when you connect it.
WiFi. My home WiFi SSID Network set to 'Connects to: Work'
Connections. 'Tasks' tab - Two settings 'My ISP' & 'My Work Network'. Advanced Tab, Select Networks. Top settings 'Programs that automatically connect to the Internet should connect using: My ISP'. Bottom settings 'Programs that automatically connect to a private network should connect using: My Work Network'. Under 'My ISP' I have the GPRS details for my carrier (Vodafone). Under 'My Work Network' I have a proxy defined with the Advanced settings configured - HTTP set to my proxy with the port 8080 and Socks set to my proxy with port 1080.
That's it and has worked for me since Windows Mobile 6.0 appeared for the Wizard. I used the same settings when I first got my Kaiser with WM 6.0 and now with WM 6.1 (more or less stock 5.2.19212) and it has worked every time.
Andy
there is always one way
http://forum.xda-developers.com/showthread.php?t=690963
WiFi and Proxy
There are too many wifi connection in the present. But the best thing is to choose the right one. Can you tell me to choose the right one with no Proxy service. Thanks
With my 8525, i connect just fine to all access points. However, when i try to browse the internet, I get the message "Page cannot be found. Please check spelling and try again". I get this message with all with web sites. I know there's something wrong becase this happens even on unsecured networks like airports, coffee shops etc. I recently upgraded to the to the new version that was released for PTT(Pust To Talk). Cans someone please help me. I really need this.
Did you change the rom on the phone???
Be sure that you are disabling the Proxy (assuming you are using an AT&T ROM). The WM6 ROMs from AT&T use a different method to manage proxy and it is ON by default. You should have two little apps called "Disable Proxy" and "Enable Proxy". Always run "Disable Proxy" before accessing anything besides your MediaNet GPRS account via the cell network. In other words, if you are accessing via wi-fi or if you are accessing "My ISP" or some other non-MediaNET account, disable the proxy first.
I've disabled the proxy on my 8525 and it seems to have done the trick. I've since been able to browse the internet using a wifi hotspot
i hope it continues to work
thanks
I've had success with the disabling of the proxy. However, sometimes in the middle of browsing i get the same message "page cannot be found...." and the the page progress indicator says "locating". it's like the proxy setting is not maintained. Can anyone provide some assistance in how this can be avoided......PLEASE?
SOMEONE PLEASE TELL ME WHAT THE HELL I'M DOING WRONG!
This always happens to me! To be quite honest, I wish I understood Cingular/AT&T or even more so the WINDOWS MOBILE 5 AND 6 CONNECTION SETTINGS and HOW TO CONFIGURE THEM PROPERLY! I just don't get it! I'm a well educated and very experianced Microsoft Network and Systems administrator for a LIVING!!! and this is like STUPID for me!
someone please help me out.
I'm in New York on AT&T's network with the 8525. I am an accomplished ROM Flasher and I am on Schap's WM6 v4.30
As usual, as soon as I flash, internet explorer works and i go to configure my pop gmail and it successfully get the gmail settings. go to connect for the first time to download my mail and it fails.... i tried to installed the cab called Cingular WAP MEdiaNet MMS Settings v2 and that doesnt work. it just adds the MEdia Net as an optional connection. I used to use the wpbear thing to get the proxy remove and restore things.. still nothing! so now i have a freaking interview tomorrow and its 1 am and im still ....ing around with the damn thing and i dont have internet, mail or connectivity to anything!!!
theres ISP, WORK and MEDIA NET... what the hell are any of these things?! i need a stupid tutorial to explain the most basic freaking thing on a pocket pc phone!
frustrated is NOT the word... ready to throw the phone out my 2nd story window as far as i can is more like it!
Schap's.. great job on the new rom.. i love it as i have loved all the others.. but this stupid at&t settings is KILLING ME!
*update* its 1:30 and im still futzing with this thing.. I used the REMOVE PROGRAMS icon and uninstalled the wpbear and cingular wap settings. i got INTERNET EXPLORER BACK but i cant get mail to work. it says Error Syncronizing. and then the typical message "Cannot connect with current connection settings. To change your connection settings, tap Settings."
In Network Management i have programs that automatically connect to the internet should connect using: MEdia Net
Programs that automatically connecto to a private network should connect using: My ISP
I only have this problem with my gmail accounts. YES i have them set to pop online. hotmail and windows live works fine.
had the same problem
What i had to do was goto connections >> connections
Advanced tab
Selecy Networks
Click the drop down, Media net should be fine
IE if you goto edit it says wap.cingular
Now hit that drop down and goto my isp
And you have to change the APN to wap.cingular
then on the username/pass screen
username: [email protected]
password: CINGULAR1
domain leave blank and hit OK
and VIOLA!!!
You are back in business
Its actually in ATT's forum help somwhere
EDIT: heres the link https://cingular.atgnow.com/cng/tutorials/KB71267.html
same problem
the way that windows mobile organizes connections is completely ilogical -- to me anyways
i am baffled..gmail will not work, same error, been going on for months now, ever since i got my device
skype will not work, same error, "cannot connect with current settings"
everything else works..
WTF IS "My ISP" and "The Internet" and "Media Net"
why are there 3 connections for the same exact god damn thing?
Should i just delete everything except for Media net?
Then maybe it will be FORCED to use it..god
I have tried doing these steps from the above post but nothing has changed
==============
update: skype now works, gmail still will not work
update2: Gmail works when wifi is on, still not over 3g
What i would really like to know is why the connections are organized this way, so maybe that will lead me to the root of the problem itself
tramane said:
What i had to do was goto connections >> connections
Advanced tab
Selecy Networks
Click the drop down, Media net should be fine
IE if you goto edit it says wap.cingular
Now hit that drop down and goto my isp
And you have to change the APN to wap.cingular
then on the username/pass screen
username: [email protected]
password: CINGULAR1
domain leave blank and hit OK
and VIOLA!!!
You are back in business
Its actually in ATT's forum help somwhere
EDIT: heres the link https://cingular.atgnow.com/cng/tutorials/KB71267.html
Click to expand...
Click to collapse
TRAMANE, you are the bomb. thanks for the help. Didn't ask the question but you sure helped me out.
thanks again.
Hi
Hoping someone can help me!
My Touch HD has been working fine up until yesterday, and now for some reason it is no longer sending emails. I know the settings are right because it was working fine until yesterday.
I have done a hard reset, and installed an alternative ROM but still no luck. My email server itself is working fine.
Any ideas please, it's driving me mad!
Thanks in advance.
Ben.
Anyone help!
Ben,
You'll have to give us a little more to go on.
Who is your Mail Provider?
What error are you getting?
Anything else that might help.
Paul.
MrRalphMan said:
Ben,
You'll have to give us a little more to go on.
Who is your Mail Provider?
What error are you getting?
Anything else that might help.
Paul.
Click to expand...
Click to collapse
Also are synchornising your mail by using WiFi or 3G
Provide Sreenshots if you can
Hi - I'm having a similar problem on my Touch HD. I have a POP email account set up which connects and downloads emails absolutely fine when I'm on Wifi or connected via Activesync. However when I am on a data connection (i.e. GPRS, 3G, etc) it comes up with an "synchronisation error", and suggests I edit my connection settings. The data connections works for everything else, including web browsing and other applications that require it. Its almost as if the mail application isn't being allowed access to the data connection unless its over wifi.
davehodgkinson said:
Hi - I'm having a similar problem on my Touch HD. I have a POP email account set up which connects and downloads emails absolutely fine when I'm on Wifi or connected via Activesync. However when I am on a data connection (i.e. GPRS, 3G, etc) it comes up with an "synchronisation error", and suggests I edit my connection settings. The data connections works for everything else, including web browsing and other applications that require it. Its almost as if the mail application isn't being allowed access to the data connection unless its over wifi.
Click to expand...
Click to collapse
Check your service provider.
I had this problem once and they were "playing" with the POP access over GPRS.
I would give them a quick call.
Regards, D
Yup, sounds like I am having the same problem as DaveHodgkinson.
Can download emails fine, can access the internet fine. Just can't send emails. I know all my settings are correct as they were working fine previously, plus I can send/receive via Outlook and webmail absolutely fine. I have a QIQ hosting package with my own domain that I use for email.
I have read about other people having this same error on their WinMo devices, but have not been able to find a working solution for it.
The error message I get is "the message could not be sent. Check that you have network coverage and that your account information is correct. The try sending again".
Well I do have network coverage, and the account information is correct, so what next!!
This fault renders a major function of the phone unusable.
I doubt this is a "fault".
I'll bet your mobile provider is blocking port 25 making everything else not matter.
Get a telnet client and make sure you can telnet to your mail server on port 25.
Use your wireless providers SMTP server.
Cheesy Dave said:
Check your service provider.
I had this problem once and they were "playing" with the POP access over GPRS.
I would give them a quick call.
Regards, D
Click to expand...
Click to collapse
Great thanks for the advice - I'll give TMobile a call and let you know what they say
Shonky* said:
I doubt this is a "fault".
I'll bet your mobile provider is blocking port 25 making everything else not matter.
Get a telnet client and make sure you can telnet to your mail server on port 25.
Use your wireless providers SMTP server.
Click to expand...
Click to collapse
From searching google this problem appears to be too widespread to be operator specific. I have tried an alternate port and that also fails. I am on o2.
anybody anymore ideas?
Planetgong,
If you are on O2 UK, this worked for me:
If you can't get your own email providers SMTP settings to work then you can use O2 settings for sending email (while keeping your own email provider for incoming email). To do this your main email settings should look like this...
Outgoing Mail Server (SMTP)
Host Name: smtp.o2.co.uk
User Name: [email protected]
Password: youro2password
Your Advanced settings should look like this...
Outgoing Settings
Use SSL: Off
Authentication: Password
Server Port: 25
If you can't remember your O2 username and password (you will have registered this when you activated your phone) then just register another one at www.o2.co.uk (the 'Register' link is near the top left corner).
Hi
Thanks for the reply. I've just tried that but get the same error message. Can you tell me where I can find the advanced settings?
Planetgong,
Assuming you can log onto your o2 mail box on your PC/laptop. And sign out again.
Go through email setup, my outgoing mail server is smtp.o2.co.uk, tick outgoing server requires authentication, untick use the same name and password. Under "advanced server settings" (at bottom of screen) have both boxes unticked. Make network connection O2 active (not The Internet).
done and next.
Enter O2 user name and password
continue to end of setup.
Then try it!!
Hi
Thanks for the reply. Unfortunately this still didn't work. It is like my Touch HD has suddenly decided to stop all outgoing SMTP connections. I have tried so many different things now and it still isn't working!
Just found this :
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/26ddec22-6854-40bf-a9de-4c50211302e2/
http://www.tracyandmatt.co.uk/blogs/index.php/2008/09/18/windows-mobile-6-1-smtp-issues
Although the problem is supposed to be solved on the version of Windows Mobile on the Touch HD, it clearly isn't! Cheers Microsoft.
Not sure what to do now. Don't see why I should accept a phone that all the features don't work on?
I've also got the .cab fix installed linked to by the traceyandmatt site.
Juggler258 said:
I've also got the .cab fix installed linked to by the traceyandmatt site.
Click to expand...
Click to collapse
Would be nice to know how it works!THX
davehodgkinson said:
Hi - I'm having a similar problem on my Touch HD. I have a POP email account set up which connects and downloads emails absolutely fine when I'm on Wifi or connected via Activesync. However when I am on a data connection (i.e. GPRS, 3G, etc) it comes up with an "synchronisation error", and suggests I edit my connection settings. The data connections works for everything else, including web browsing and other applications that require it. Its almost as if the mail application isn't being allowed access to the data connection unless its over wifi.
Click to expand...
Click to collapse
hi,
disable your proxy. that might help
goto settings, tab connections, then select connections
next select 'setup my proxy'. go to tab 'proxy server' and uncheck 'this network uses a proxy server'
freggelfrot said:
hi,
disable your proxy. that might help
goto settings, tab connections, then select connections
next select 'setup my proxy'. go to tab 'proxy server' and uncheck 'this network uses a proxy server'
Click to expand...
Click to collapse
Proxy is unchecked, still no access. Can I return the phone on the basis it isn't able to perform all the functions it is supposed to?
planetgong said:
Hi
Thanks for the reply. Unfortunately this still didn't work. It is like my Touch HD has suddenly decided to stop all outgoing SMTP connections. I have tried so many different things now and it still isn't working!
Just found this :
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/26ddec22-6854-40bf-a9de-4c50211302e2/
http://www.tracyandmatt.co.uk/blogs/index.php/2008/09/18/windows-mobile-6-1-smtp-issues
Although the problem is supposed to be solved on the version of Windows Mobile on the Touch HD, it clearly isn't! Cheers Microsoft.
Not sure what to do now. Don't see why I should accept a phone that all the features don't work on?
Click to expand...
Click to collapse
Didn't work for me! couldn't send any email anymore! Restored a backupfile
Hello!
I own a htc diamond and want to access a wifi network that's using a HTTP proxy. I can connect to the network itsself. However, the proxy settings aren't applied or sometimes deleted when I disactivate and reactivate wifi. When I try it at home, it can still access the internet even if I set the proxy server. (I don't have a proxy server at home, so it shouldn't work then...)
With a iPod Touch/iPhone the following settings work:
Server: server-01.hak-reutte.ac.at
Port: 8080
I also have to authenticate using an username and password, but I think there's also a web form so it's not necessary to configure that in the proxy configuration.
Thank you,
Simon
SimonKnight6600 said:
Hello!
I own a htc diamond and want to access a wifi network that's using a HTTP proxy. I can connect to the network itsself. However, the proxy settings aren't applied or sometimes deleted when I disactivate and reactivate wifi. When I try it at home, it can still access the internet even if I set the proxy server. (I don't have a proxy server at home, so it shouldn't work then...)
With a iPod Touch/iPhone the following settings work:
Server: server-01.hak-reutte.ac.at
Port: 8080
I also have to authenticate using an username and password, but I think there's also a web form so it's not necessary to configure that in the proxy configuration.
Thank you,
Simon
Click to expand...
Click to collapse
If you use ActiveSync or Windows Mobile Device Centre verify the connection settings are NOT set to automatic. If they are then the Proxy settings are overwritten each time you connect to your PC to sync. If you want to use a proxy over WiFi then you need to make sure your 'Work' connection settings specify the proxy and you need to configure the WiFi settings to 'Connects to Work' (or whatever it says, but NOT 'Internet').
Andy
Hi ADB100!
Thanks for your answer. The problem occurs even when I'm not connected to ActiveSync. Somehow the proxy server is reset when the WLAN is used. I tried the application WmWifiProfiles, but the problem is still there. When I set the proxy server and exit the settings application, the settings for HTTP proxy are somehow not saved. (When I reopen the settings dialog, the http proxy setting is blank, but the proxy for socks is still there.)
Regards,
Simon
SimonKnight6600 said:
Hi ADB100!
Thanks for your answer. The problem occurs even when I'm not connected to ActiveSync. Somehow the proxy server is reset when the WLAN is used. I tried the application WmWifiProfiles, but the problem is still there. When I set the proxy server and exit the settings application, the settings for HTTP proxy are somehow not saved. (When I reopen the settings dialog, the http proxy setting is blank, but the proxy for socks is still there.)
Regards,
Simon
Click to expand...
Click to collapse
Do you have proxy auto-discovery on?
Code:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
EnableAutoDetect=00000001
If its set to 1 then proxy auto-discovery is enabled, 0 is disabled.
I have no idea if it is this but worth a shot?
Andy
Hi ADB100!
AutoDetect wasn't acticated. (The key didn't exist.) I tried creating the key with value 0 and 1, but didn't help.
I think this must be a bug, because there are a lot of topics about this problem. Unfortuntatly, nobody seems to have a solution for this problem .
I tried changing the registry keys in HKLM/Comn/ConnMgr/Providers/. That worked, because the internet connection was dead then . I think it's possible to work around the problem by changing this keys. I will try that next week and when that really fixes the problem, I'll probably release an application for it.
However, do have some ideas left?
Thanks,
Simon
Bizarre....
I have never seen this on any of the Windows Mobile PDA's I have had.
I know if the connection settings: 'This computer is connected to:' are set to anything other than 'Automatic' then it resets any proxy you configure. I have mine set to 'Work Network' and the settings are never overwritten. I use a proxy at home and remember playing around with these settings as I had similar issues initially.
I know there is a known issue of the 'Hidden Proxy' if you let the device configure itself using the 'Connection Setup'. I have never let my device do this and have manually configured the HSDPA/GPRS settings.
Andy
Hi ADB100!
I've also aborted the connection setup, cause I didn't want my device to use HSDPA automatically.
I'm not 100% sure but I think my old device (HTC S730) had also some problems with the proxy, but I was able to solve them. Maybe it's also a problem with my ROM.
How stable/fast are the current RC builds of 6.5? Are they ready for every day use?
Thank you,
Simon
SimonKnight6600 said:
Hi ADB100!
I've also aborted the connection setup, cause I didn't want my device to use HSDPA automatically.
I'm not 100% sure but I think my old device (HTC S730) had also some problems with the proxy, but I was able to solve them. Maybe it's also a problem with my ROM.
How stable/fast are the current RC builds of 6.5? Are they ready for every day use?
Thank you,
Simon
Click to expand...
Click to collapse
I haven't tried any 6.5 ROMs for any period of time as they all seemed too buggy. I am on an almost stock 5.2.19212 ROM that I have lightly customised in a kitchen and I am happy with it.
Andy
This is really annoying... When you search the forums for "wifi proxy" you'll get more than 10 threads with the same problem, but without a solution.
You are using a wifi router with proxy at home and it works, right?
I'll upgrade to 6.5 now, maybe this fixes the problem...
Thanks,
Simon
SimonKnight6600 said:
This is really annoying... When you search the forums for "wifi proxy" you'll get more than 10 threads with the same problem, but without a solution.
You are using a wifi router with proxy at home and it works, right?
I'll upgrade to 6.5 now, maybe this fixes the problem...
Thanks,
Simon
Click to expand...
Click to collapse
Yes, I have MS ISA 2006 and it works.....
Truely amazing. I've upgraded to 6.5 and the problem is still there :-(. I've the radio from the latest official diamond rom. Could an other radio fix the problem?
//edit: Just to describe my problem further: When I set the proxy, exit the dialog and reopen the dialog, the proxy is there. When I open the internet explorer then, the http proxy gets deleted. However, the socks proxy is kept. This is kind of frustrating...
Thanks,
Simon
Read this one: http://www.htc.com/www/faqs.aspx?p_id=13&cat=0&id=36792 According to this article wifi + proxy should not work. What can I do now?
// Update: This looks extremly promising: http://forum.xda-developers.com/showthread.php?p=1990412#post1990412 I'll try that immediatly and post the results. If that works, I'll build an application to simplify applying the fix.
Thanks,
Simon
My status is too. Please help me!
It's a bug, that's sure. I finally got the proxy working, but after reconnecting the proxy settings were blank again .
Just to let you know I was also having problems with proxies and a google led me to this thread. For me, the advice in post 2 worked perfectly. I am using a 6.5 rom on a Touch HD.
Hi SivEd!
Did you also have the problem that your proxy settings get reset when you reconnect to the wifi network?
I've written an app that resolves this issue, let me know if you want to test.
Hi Anks!
Please upload your app, this is a real problem for me.
Thanks,
Simon
Simon, sent you a PM.
The problem seems to be fixed in recent Windows Mobile 6.5 builds, at least for me. I'm using build 21812. Unfortunatly, proxy authentification seems not to work in Opera. In Internet Explorer a dialog appears where I have to enter my username and password. Opera doesn't display such a dialog. But the main problem (proxy setting gets deleted) has been resolved.
HTH,
Simon