Hi,
I'm using ROM Build 15671FARIA 3.5 (AKU 3.3) on my Wizard. When I try to add a new com-port with VirtCom or Serilot, the software tells me that it cannot find the dll's (which are definitely at the right place) or the a port could not be created.
Since non of these com-splitters work on my device but other users with a wizard successful use the software, it raises the question, whether this is related to this specific ROM.
Is there anyone who uses a com-splitter (not the WM5 build-in one) with his ROM?
Regards,
Rudi
hey guys i've upgraded to Helmi Windows Mobile 6 the first day it came out but as i see right now there is other versions of wm6 , which one is better more stable less bugs and so on ....
Thank You
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
newkpt said:
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
Click to expand...
Click to collapse
For those who dont know, PDAViet has just released a new BA rom with thse spec : WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
it has built in TouchFlo, and als the latest .NetCF 3.5 as Extrom...
I also have tried all the WM6 version since Helmi R0 release, Xplode's latest rom and PdaViet's WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT).
All are good, stable and fast.
I tried Xplode's latest rom for only 1 day and switched back toPdaViet's cause I had problems:
1. Somehow, the OK button (on top right hand corner) close apps without saving it (I had this problem when using PocketInformant and PocketBreeze - weird. I put it on forum, but no one else seem to have this issue)
2. I feel that the touch screen is not as responsive as other roms -I dont know, maybe I was wrong...but this is what i feel anyway
For now, I am using PdaViet's latest rom WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
, and its very good...
hey i hv tested all the three but i hv not found big changes in them and switch back to helmi as i hv the backup of it. all three r same as they r helmi based. so i advised to go for helmi it also has gsfinder as file explorer.
which is the best
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
shazzy84 said:
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
Click to expand...
Click to collapse
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Just want to say yes, I am using latest rom of PDAViet too, and I love it. All bugs seems fixed. I just don't like the touchflo as I was using HTouch before and it works better (quicker, smoother, no flare, more open to add links...)
ftouch
joseph.sapri said:
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Click to expand...
Click to collapse
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
shazzy84 said:
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
Click to expand...
Click to collapse
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
I prefer Xplode's latest release...its the fastest one by far, in my experience...can't really fault it at all....I dont like the Touch Flo...it's too slow on the BA...and I don't find it beneficial at all...just a waste of resources.
joseph.sapri said:
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
Click to expand...
Click to collapse
excellent! Thanks a lot joseph sapri! I just did it and i have so much more rom space and the ftouch is gone! MUCHO appreciated
no probs. I was in your position before.. . This is what this forum is for...
i see by far more people like PDAViet release
could any one provide download link and is there any thing special we have to do to upgrade from helmi WM6 ?
Thanks
Download links are in corresponding threads - THE FIRST POST usually
You should backup your data before flashing, upgrade procedure is the same as for any WM6.
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
joseph.sapri said:
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
Click to expand...
Click to collapse
I just upgraded using this rom, but the sim card cannot be recognized. Any suggestions?
Hello!
I'm new here. I'll upgrade my BA soon, so I need to know: What version of WM6 is the best?
Helmi Windows Mobile 6 Profesional R0 or
WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or
WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
Best WM6 ROM (as at Jan 2008)
Hi there, I have used both of the Roms at the top of your list and I find Xplodes to be faster and less buggy and I am sure it uses less power but can't prove it. I think I liked the fonts better in Helmi's Rom but it is amasing how quickly you get used to a new ROM.
One thing is for sure WM6 on the BA Rocks!
My personal pick as at today 14-Jan-2008 is http://forum.xda-developers.com/showthread.php?t=342142
Enjoy.
Another vote for xplode's ROM. It's fast and very stable.
PoGa
Xplode ROM rulez
how different
what are the main differences between helmi's and explods? i am using helmi's and am pretty happy. i would like to try explods but can't figure out how to get it to take. i can't remember if i have to manually put into bootloader or not. one thing i can say is that i don't find anymore bugs in helmi's rom than i did with some stock roms provided by phone manufactures.
retrofred said:
i don't find anymore bugs in helmi's rom than i did with some stock roms provided by phone manufactures.
Click to expand...
Click to collapse
You make a great point, we often refer to these bugs as if Helmi or Xplode put them there, when really they were issues that existed in the software these guys ported to the BA.
Having recently upgraded from Helmi's to Xplodes I can say that an issue I had with fonts in Co-pilot is still there, which probably means it is with Co-pilot's WM5 version running on WM6. The ROM was definitely faster when I first installed it but now I think I have installed too many apps and it is slowing down for me.
I had an issue with my marsware weather panel causing failed boots (needed to go to safe mode, then reset) after a backup with Helmi's version, this issue is gone with Xplodes.
Both versions have inherited the 'issue' with having to turn on wifi twice.
I personally love the task/memory manager in Xplodes version, and the wireless today screen display plug in.
Either Way is so great to have WM6 on the BA.
Just updated my signature.
Duddits said:
Xplode ROM rulez
Click to expand...
Click to collapse
But has helmi in his sig ^^
Hey guys, does anyone have the latest WM6.1 Bare Rom, (no additional programs loaded) for SPL1.2 ?
Also, does anyone know which wm6.1 rom works with TouchFlo3D ?
Thanks
Is there anyway to install WM6.1 Pro on Cingular 8125?
My phone is unlocked too.
this wiki seems like a good one-stop place, working so far for me:
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
got hardspl done, next step select a rom!
by the way it wouldn't run on xp home. had to use xp pro!
How to find an original WM6.1 Pro ROM ?
[email protected] said:
How to find an original WM6.1 Pro ROM ?
Click to expand...
Click to collapse
There aren’t any original 6.1 ROMs.
All 6.0, 6.1, and 6.5 ROMs are custom built.
Is there anyway to upgrade only AKU ? WM5 is ok for me.
I need to WPA2. Even WPA-PSK doesn't work for me
bump