Database Users

unlucky buying...

hey...
i hope you guys can help me out.
my problem is ,that i bought an herold witch is stuck in the bootloader !
the need little stripes won´t dissapear by any type of reset.
there a so many threads that stroke that a bit... but none only for that specific propblem...
i don´t know by witch method the thing was flashed so i can´t help you there.
i hope
and yes i tried the search
so thanx in advance

You could always try flashing the original ROM. They can all be found here:
http://rapidshare.com/users/5EWZ4
If that doesn´t work it would be helpful to know the SPL version, I can´t tell by the picture the numbers are too small.

OH my god !!
Thx a lot ! for tha fast answer....
but i can try it in a few days....
will post the result then
thx

from looking at the picture you included, I can see your IPL is v1.xx
There have been many people who have permanently bricked their phones by trying to hardspl and uspl ... so make sure you do some research before attempting to do those..

If it goes to bootloader automatically, and it has an SPL of 1.x, it's probably already permanently bricked. Your only option is to bring it to a repair center. Sorry.

i will be back next week on tuesday i think ... then i can look witch spl i have.
hey. and thx for your help already
i am pleased for every hint you have for me !!
could that be a solution for me too ??? ----> http://forum.xda-developers.com/showthread.php?p=1911779

ok...
my SPL is 1.08.0001
IPL the same
i am now trying to reflash the original firmware... lets see...

hm...
invalid flashingtool.... error 300 ????
it says i need a newer flashingtool...... WHAT !!??!?!
i now figured out that it is an italien device.. but the italien firmware also didn´t work...
do anyone has an idea ??? PLEASE....

Like I said, if it's stuck at bootloader and has that SPL, it's probably permanently bricked. Either the Radio or SPL or IPL was accidently overwritten. I was researching and found something that maybe be useful if it's the radio being overwriten but don't have the knowhow to port it to the Herald... yet.

hm...
i just tryed : 1. Kill ActiveSync process - wcescom.exe on your computer.
2. Attach USB-cable to device.
3. Run programm from attach, select "\\.\WCEUSBSH001" from
port's list and click Ok.
4. Type (type himself, not copy/paste) in window:
password BsaD5SeoA(press Enter)
ruurun 0(press Enter)
ResetDevice(press Enter)
and after a hardreset..... the screen went green....so... Step forward or did i now find the perfekt brick procedure
what means a greenscreen ?? btw

so now back in rainbow-mode
is there a way to CID unlock the thing with PUTTY
short before it enters bootmode it displays "searching for sd-card"
flashing from SD-Card ??? possible ???

Phone blocked on the SPL 3-color screen

After a run of the PolarisUnlocker.exe, the process crashed at the begining (Step1) and the Phone is now blocked on the SPL 3-color screen (displays Replug USB Cable, Pola100 MFG, SPL-1.00.1000 CPLD-2). I can't do anything. PLEASE help me, what should I do? Could you advised me first if I should remove the battery to switch OFF the phone? or try a hard-reset? please help. Thanks a lot.
Fab

fab35 said:
After a run of the PolarisUnlocker.exe, the process crashed at the begining (Step1) and the Phone is now blocked on the SPL 3-color screen (displays Replug USB Cable, Pola100 MFG, SPL-1.00.1000 CPLD-2). I can't do anything. PLEASE help me, what should I do? Could you advised me first if I should remove the battery to switch OFF the phone? or try a hard-reset? please help. Thanks a lot.
Fab
Click to expand...
Click to collapse
You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
Thanks to Christonge.....
PQillu,

Thanx Buddy
Successfully done lots of thnx to u bro pqillu..
HTC Touch Cruise
Rom Ver 1.25.408.1 ITA
Rom Date 12/12/07
Radio Ver 1.58.21.23
Protocol Ver 25.65.30.04H

Can you sticky this post can i'm boring to view everyday new thread with the same question ^^

task 8 make my polaris restart ? is that ok or what

[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode.

I'm new in these forums as well I'm new with flashing ROMs so obviously I messed up flash process and my device stuck in bootloader (tri-color) mode. This post I address to those unfortunate like me .
# Symptoms #
- ROM flash started and stopped at 17%. After recovery flash process stucks at 0% and pops Connection Error 262. Device is stuck in bootloader mode not possible to flash anything, hard reset does not help, flash from SD card does not help either.
# Possible cause for that #
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
2. Connection between ActiveSync and device was not established when flashing ROM file.
Before to go any further please take your time and read Polaris Wiki to get familiar with glossary and acronyms used here.
PROCEED ONLY if flashing original ROM does not help, hard reset does not help and flash from SD card does not work.
# Solution #
1. Download MTTY software.
2. Kill ActiveSync (Press Ctrl-Alt-Del and stop rapimgr.exe and wcescomm.exe processes).
3. Plug Polaris into usb port (Plug directly not through hubs).
4. Start MTTY after chose USB from PORT dropdown list (if it is not listed there then ActiveSync processes were not stopped).
5. in window type: set 16 0 (enter cmd mode)
6. after type: task 8 (this will format phone)
7. after type: task 0 (this will restart phone. Not always necessary)
8. soft reset
This procedure can damage your phone. Use it as last resort.
Official source in french here.
Now before flashing any ROMs read carefully how to flash (not install!) Hard SPL.
# P.S. about install and flash termins #
This error with flashing happened to my due misunderstanding between notions of installing something on your device and flashing. In my opinion those are completely two different things. As for first I understand of running some cab or exe directly on device. So problem comes when people sees install Hard SPL en device as they try to find some cabs or exes to install directly on device or they just copy all files to device. To make things clear Hard SPL "installation" actually is ROM flash process which must be done with maximum caution, but those who did not read Wiki won't understand it.
Cheers, whitealien

BiG THX @ Whitealien.
works to 100% on my Touch Cruise.
I flashed under Vista Ultimate...
# Solution # ... addition from me for Vista users!
....
2. Start Windows Mobile Device Center and Deaktivate USB Connection and then start Task manager end kill
Process wmdc.exe.
Rest of whitealien. and have fun!

Thank you!!!!
I had given up on this, and was sure my only option was a warranty repair :O

always welcome

Thanks, you've saved my Polaris.
Mine didn't want to react anymore to the soft reset, so I replaced your instruction 8 with:
Cmd>boot
and that did the trick.

whitealien said:
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
Cheers, whitealien
Click to expand...
Click to collapse
I had exactly the same problem, for whatever reason went back to original SPL before HARD SPL.
I solved my issue by using back the original original HTC RUU_signed.nbh and flash it using the CustomRUU.
Thereafter, repeat the entire HARD SPL and flash the home cooked ROM.
Cheers.

For unbricking your HTC Polaris, you can try also a hard-reset (if it is related to a software error):
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html

Thank you very much
you really helped
thank you again

mrfone2003 said:
Thank you very much
you really helped
thank you again
Click to expand...
Click to collapse
you are welcome.
Seems people are still falling for this error.

I'm has this error.
Solution (with SPL-2.20):
- kill ActiveSync (process, not uninstall)
- cable to USB on motherboard
- hard reset on phone
- connect to cable
- flash OFFICIAL rom
Two time I revive my Polaris.

help me please
hi.I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help

thanks for the support
Thanks dudes for the great help you gave to recover my htc dual from bootloader screen. I am very happy to have my phone back. Thanks for everybody for the help they have provided generously. I appreciate alot. infact thousands times.

I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.

aaront1988 said:
I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.
Click to expand...
Click to collapse
Did you follow all steps from 1st post?
Did you kill all running ActiveSync processes?

I did indeed, i'm on vista so didnt have those particular processes going but followed the step from Aeroman and it still doesn't want to play. Any ideas?

managed to find a working XP machine and it worked a treat. Thank you so much.

thanks,this solved my pb

please help
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((

wesram said:
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((
Click to expand...
Click to collapse
What did you do to get there?

whitealien said:
What did you do to get there?
Click to expand...
Click to collapse
hey, im sorry for the late reply. it didnt notify me and now after posting several times asking for help in many threads by accident i bumped into this thread again to see that u answered and thank you so much.
now, what i did? this is the wierd thing, i didnt do anything, i went and back to see my phone stuck in bootload .... after this i tried almost everything i can find. from ur solution to flashing original rom to hrd spl to .........
now all gave an error except the original rom (polaris.1.28.415.2), it did went to 100% and device restarted to take me to my nightmare .... another bootloader screen am i suppose to search for polaris 1.28.0000?
i still have now the same writing shown.
please help me with this, its a nightmare .... is it totaly dead???
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader

Dead HTC Phoebus Juno Apply Hard SPL Diamond

Dear All,
Help Required,I m Trying To Load Hard SPL From Diamond.After Load My
HTC Juno is dead & Couldnot Start in Bootloader Mode.
Please Help Me To BootLoading Again.............................

I'm sorry, but I don't think it's possible. You're not supposed to use the HardSPL from one device to the other because it is meant for that specific device and only that specific device. You probably have bricked it.
The only thing you can try is to attempt to start the bootloader mode. Hold down the camera button while turning on the Juno and keep holding it after you've released the power button. If the 3 color bootloader screen comes up, you can flash the official T-Mobile ROM, but I don't think that's possible because you tried loading a Touch Diamond SPL onto it.

Thanx ND4SPD,
I Tried To Enter Bootloader Mode But Failed.
Any Advice will be appreciated.

you have to try JTAG mode

tramuyo,
Thanx For Reply.
What is JTAG? How I Use It? Please?????????????????

artemis dead when flashing cid unlock at 99%

am using artemis p3300 but when i flashing uspl at 99% it shows upgrade failure now pda will be dead i cant go bootscreen too is any solution to back to boot screen? help me

Hi,
what do you mean by bootscreen? Windows boot screen or Artemis' bootloader (tri-color screen)? First of all I would try a hard reset, here's how to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
Did you try to flash USPL with this? http://forum.xda-developers.com/showthread.php?t=311403
You should at least be able to enter bootloader..here's an interesting thread:
http://forum.xda-developers.com/showthread.php?t=306904 .
Sorry I can't help more, i never experienced a similiar problem but I'm really curious to see it solved, waiting for some guru to help

sorry sir if i put battery inside pda will be start heating i cant switch to tri colour bootscreen havent money to buy a another pda am going to mad and am a looser.

Use MTTY to reset flash, the install the official rom for your device.

device never switched on is there any way to switching power on my device htc artemis p3300

bricked artemis goes mtty to reset the flash please give link here
how can i mtty to reset my bricked artemis please give me the link to download the file.