I have a Spring Mogule and i loaded a bunch of different rom include the factory rom from the HTC website, and no matter what rom i load it work for 2 to 3 minutes and freeze. can anyone help me with this isuuse?
i loaded the factory bootloader 1.06 i believe, and still name thing.
i loaded the latest htc software and load the phone and still no luck, even the HTC software freezes.
Related
Having a small issue here. I just picked up a Juno (Tmo branded). Its completely stock, no 3rd party apps.
Anyway I'm trying to flash a new rom (clean rom, 6.1 rom..ect). When I start the flasher, it gets to 2% then fails. The phone reboots and operates normally. I get a error message on the computer telling me there is a problem flashing.
Im running vista sp1 on my macbook. I also tried this on a dell laptop (xp s2), same problems.
BTW: Software Ver on the phone: 1.03.531.4
did you CID unlock?
you might need to do that first so that you can run the Upgrade
Yea I'm pretty sure I CID unlocked it. Maybe I ran it a few times too many, I'm not sure.
I did get it to work. What I did was upgrade the "Official" FW first. I went to the tmobile upgrade site and got the updater from them and updated. That went fine, but it was still tmo branded fw.
The I ran jumpspl.exe, I guess that unlocked it. The unit rebooted but the screen remained off. I then ran the Clean Rom flasher and it worked. The progress bar never appeared on the device but it was on the computer and went up to 100%, device rebooted a few times, took a while each time as it did. Finally I had a usable phone
run jump spl then you upgrade your rom.
Please help out my coworker has a stock Hero on sprint and we are unable to update the firmware. I was able to update mine, our demo and one other co-worker's phone but on hers, every time I actually go into the firmware update it states no updates available. Sadly we work for a sprint store and hers is the only one giving us an error. I've already gone to the point of wiping the device to restore to factory but with no avail. Aside from having her swap out the phone at our repair center, I wanted to see if anyone has had the same problem and was able to get passed it. I saw a couple of posts stating to use the RUU utility, but on a stock rom that we already "RTN'd" I don't know how that would help. Any help would be greatly appreciated.
I've seen something similar. A coworker of mine just got a hero last week (after the MR release) and her phone shows the older software version but it will not recognize a firmware update is needed. I checked the phone's awake time and it was low, indicating the messaging app was not keeping the phone awake or draining the battery so I assumed it must not need the MR update even though it shows the old software version.
A couple others have metioned this... For some reason, some phones shipped with older firmware, version 1.22.651.1 instead of 1.29.651.1. Doing a hard reset on the 1.22 version wouldn't help, but updating the firmware to the 1.29 should. After that, check for the official MR.
You can find the file over here:
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
http://forum.xda-developers.com/showthread.php?t=559622
the guy at the sprint store (3rd party store) where i got mine from , his hero will not update or even flash back to the stock sprint ruu everytime it downloads the update and goes to apply it it shuts the phone down and thats it no reboot have to pull the batt to get it to power back on again
I had the same problem. I got my Hero on the first day it came out. Every time I tried to download the firmware update it would say no update available. Took it to the Sprint store and no luck either. They finally swapped out my original Hero for a new one and I was past my 30 days.
Hi all...I recently bought the HTC HD2 and ever since day one I've been having problems...The place I bought it from gave me a network locked phone (to Virgin Media UK) by mistake first and I had to send it back to them to get it unlocked for me (I live in the Middle East).
One day later I got the answering call problem mentioned many times in these forums...Next day, after installing a few apps, I found out that my phone takes a looong time to boot. The initial logo comes up fine with those version numbers or something at the bottom left...After that the virgin media animations loads up and then its stuck...few minutes later I get a message saying the phone couldn't boot up and I have to reset it by pressing volume up key or any other key to cancel...I just left it as it is without pressing any keys and few minutes later it shows the windows logo and then everything starts up normally. This is the same thing that happens everytime I reboot now.
1. Is there something that's causing the device to get stuck between the virgin media animation and the windows logo? I would prefer to get this fixed without resetting the device.
2. However, if I had to reset the device will I be stuck with a network locked device again?
Here is my software versions if it helps in anyway:
Manila: 2.5.19211619.0
ROM : 1.66.351.1 (76641) WWE
Radio: 2.07.51.22_2
I had this problem when i flashed the evo ROM, but i think that was because i tried to flash without HSPL, anyway all i did was flash it with another ROM and it worked fine, the best i have found and am currently using is EnergyROM Ultra.
What i would suggest to you is to either try flashing it with a custom ROM *WILL VOID WARRANTY*, to do that there are plenty of tutorials on here but basically just put HSPL on your phone then flash new ROM and radio ROm too if you like or you can send it back and see if they will fix it for you which they should because it seems like you havent done anything to void the warranty.
Let me know how if this helps and what you decide to do.
Psychoticus said:
I had this problem when i flashed the evo ROM, but i think that was because i tried to flash without HSPL, anyway all i did was flash it with another ROM and it worked fine, the best i have found and am currently using is EnergyROM Ultra.
What i would suggest to you is to either try flashing it with a custom ROM *WILL VOID WARRANTY*, to do that there are plenty of tutorials on here but basically just put HSPL on your phone then flash new ROM and radio ROm too if you like or you can send it back and see if they will fix it for you which they should because it seems like you havent done anything to void the warranty.
Let me know how if this helps and what you decide to do.
Click to expand...
Click to collapse
Thanks for the reply.
I got tired of waiting ages for the phone to bootup and decided to take a risk and reset it. Luckily it wasn't network locked after the reset.
I believe the app that caused this to happen was swype. Even though swype worked perfectly, it was after installing it and restarting that made my bootup take forever. Uninstalling it didn't help too. After reset, I no longer face any of the problems I faced earlier..It hasn't got stuck when answering a call (yet...) and I've installed everything I installed earlier except for swype.
Helo all - I could really use a hand here. This is the second time I have faced this issue.
When trying to make a call on my 614c when the battery is low, it crashes. Upon reboot, the radio no longer works and I cannot make any calls. It just goes into a permanent "Seaching" mode.
What I've tried:
Reboots - warm and cold
Removing the battery for 30 mins
Reset to defaults
Multiple different ROMs including upgrading and downgrading the Radio
No luck.
Last time (3 months ago) I ended up sending it to ipaqrepair to be fixed.
They said:
"the un-official hacked ROM installed in combination with a corrupt / mismatched GSM Radio ROM, these are the root cause of the issues"
I had actually NOT installed a non-official ROM until after it stopped working in a desperate attempt to fix it. But when they got it, it was a 6.5 ROM.
This time, I had upgraded it to 6.5....but I have since downgraded to the official ROM an installed the. .89 Radio update.
It wont work at all and I can't justify mailing it away for another expensive repair.
Any ideas or assistance would be greatly appreciated. Thanks.....
Any ideas? How can I effectively "blow away" all the software/drivers and set the device up as new? IpaqRepair said it was corrupt software last time....
I've installed different ROMs via flash.dio and I tried the HP radio upgrade RUU_1.8.0_081208_MP_M089_WWE. Are their files or settings that the installs I am doing do not affect - and if so, how do I repair/replace them?
Using Sim Manager, it says the phone is not ready. It's just like the phone radio won't initialize...
This phone originated overseas (Europe) - could that be somehow causing this issue since I'm using it in the USA? Something locking or changing and no longer compatible?
Not sure what else I can do and am missing my phone. Any ideas or assistance would be greatly appreciated.
Still fighting with this....maybe onto something now?
When I get the asset viewer information for the phone it shows the radio is present and the firmware number.
the Stack Version, Bootloader Version, Filesystem Verions and Radio GDFS versions are blank.
It does show the IMEI.
I'm guessing I'm missing file/data for the radio....but reinstalling the Radio ROM HP offers has not helped (maybe not complete - just an upgrade?)
Thoughts?
Anyone have a copy of the original ROM and .81 Radio ROM?
Maybe rolling it all the way back might get it operational again....
Official Drivers/Rom/Radio for 614c
Hi,
You can download official drivers from HP website. The forum does not allow me to post the link. Just search for "official 614c drivers" in google and you wil get the link.
Also note, please install using WINDOWS XP os as installing this using other os such windows 7, windows vista etc is not possible.
Okay - I tried installing the software from the HP Website using XP - but it still isn't working. It's just like the software for the radio is corrupted and it won't replace it (does not list the versions like it should when you look at the software inventory).
Is there any way to manually do this? Any advice or help would be greatly appreciated.
If anyone can help me get this resolved, I'm definitely buying them a beer.
Basically the GSM just seems to be bricked. Last time a software fix resolved it, but I'm not sure what software needs to be installed to get the radio working again.
What is the best way to blow it all away and start over? Is there a way to manually delete the radio files - or to look at them for versions/dates to see what is corrupt or mismatched.
-Alpha- said:
If anyone can help me get this resolved, I'm definitely buying them a beer.
Basically the GSM just seems to be bricked. Last time a software fix resolved it, but I'm not sure what software needs to be installed to get the radio working again.
What is the best way to blow it all away and start over? Is there a way to manually delete the radio files - or to look at them for versions/dates to see what is corrupt or mismatched.
Click to expand...
Click to collapse
Just bumping this thread...would love to have this phone back.
Bumping once again - still in hopes of fixing this phone. Can anyone help?
-Alpha- said:
Bumping once again - still in hopes of fixing this phone. Can anyone help?
Click to expand...
Click to collapse
I guess, you will get enlightenment for the problem on your device at http://forum.xda-developers.com/showthread.php?t=455840
Bump.....
Still hoping for a solution. I have gone to a Glisten now, but do not like it as much as the 614c.
I'm open to any suggestions.
hey people, i have the htc surround on att and unlocked,, and I wanted to flash the telus rom, I've been trying but when i get to the part where I'm suppoused to see the flash version of my phone, i doesn't show up. and then i get the some error telling me to make sure my phone is connected.
I got tired and did the htc hack and got pre-NoDo, but still says at&t in more info, I wanted to flash it because according to MS Where's my phone update? page Telus is already scheduling the update which takes less than 10 days ....