Is there anyway to do this....Some times I turn on my PPC and need to access something and out of no where, the promp comes up and there really is no easy way of cancelling it.....I know I know....why not shut off the Wi-Fi, i rather not go back and forth and back and forth......kinda think about it......We need a new Connection Manager.
Edit.
On what?
On my droid x you can turn off the notification in wireless settings.
In the WiFi section of your phone, click menu, then advanced.
Related
i just got my phone not a week ago(the Sprint HTC Touch) and just realized that my company does not allow phones with internet access, i was wondering if there was a way i could disable the internet on the phone, so that i dont accidentally fat finger it and open something up... thanks in advance
How about turning off "Data Connection" from the Comm Manager?
i havent tried it, but have you tried deleting the modem settings?
you know, the ones that dial out #777. or maybe you can just get it to dial elsewhere
as far as i know there is no way to do that without deleting the #777 connection in setting/connections/manage current connection.
But then you will not be able to send picture and video message. As that is the same connection it uses.
Also as soon as you soft reset the device. the connection is back again.
Really I don't understand how your company is able to put a cap on this, as most every cell phone now and day can access the internet. Even if it's not activated on the phone, you can still access for a use per minute charge.
And I'm not just talking about pda/phones.
Unless I'm wrong. But i have yet to find one that doesn't.
Call Sprint and have them "Disable NAI Functionality" on your phone. It's a service feature that restricts your device from accessing any kind of data.
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
thanks.
I have been trying to figure this out for ages. Thanks for your help.
thanks for all of your help, i dont agree with my company, but i really like this phone, i just need to show them that it does not work for a few months then after they stop checking i can re-enable it.
This seems like I've got something setup wrong. When I am in my office, my phone works great and it connects using the WiFi here. The problem comes what I leave the office and go someplace that doesn't have WiFi. If I want to connect to the internet for example, I have to go to settings->connections->connections->advanced->select networks-> and then change from "My work Network" to verizon wireless. Of course, when I get back to work (or anywhere with a wifi connection) I have to remember to change the phone back to "My work Network".
Is there a way to automate this?
As a second question, some apps seem to always use the data connection even if the phone is on a wifi connection already. Is there a way to change this behaviour as well?
Anybody? Seems like something everyone could use.
I am not sure how you have your device set up or which rom you are using, but my device does not behave in this manner.
My device is almost exactly opposite. It is always connected to data network unless I force it to use wifi. I have not messed with any settings besides setting up my wifi connection. Interesting.
kdj67f said:
I am not sure how you have your device set up or which rom you are using, but my device does not behave in this manner.
My device is almost exactly opposite. It is always connected to data network unless I force it to use wifi. I have not messed with any settings besides setting up my wifi connection. Interesting.
Click to expand...
Click to collapse
I'm using DCD's ROM. And your issue sounds exactly like mine. It stays on data until I force it onto WiFi and then it will stay on WiFi until I force it on data. Kind of a pain if you ask me.
1st Question - Go to Start -> Settings -> Connections -> WiFi -> Menu -> Advanced and select your "Turn Off WiFi opition if not connected in __"
2nd Question - Idk, but I want that too, so that when I turn on my WiFi, my data connection turns off, and when I turn my WiFi off, my data turns back on, but I haven't found anything for that yet.
I went to the C.Manager. I can't get it to work right.
This is what it's set to:
Wireless Connection(Disables all wireless connection): ON
In-Flight Internet(Enable Wi-Fi and Direct push): OFF
Phone(Change phone settings): ON
Bluetooth(Turn on Bluetooth): ON
Wi-Fi (Connect to Wi-Fi Network): ON
MS Direct Push(Retrieve Outlook mail as it arrives): OFF
Data Connection(setup data connection): ON
With it like this, if I do a reset on the HD2, when it reboots, I see a Wi-Fi icon at the top. I click the icon, it says "Multiple Connections Detected", I click on the the wi-fi icon, New window opens titled Wi-Fi. Listed says wifi(Turn on wifi):OFF. Next line says Wi-Fi Networks, which has nothing listed.
I never changed of of the wi-fi stuff till today. I did do ONE regedit, for the Wireless N feature, but I changed it back when I got all these problems. And no, I don't know if I had this issues b4 that one edit change. And yes, I did a soft reset after every reg change.
1) I tried clicking the wi-fi on this screen.button pushes down but nothing happens. I press "X" and close the window
2) I launch Comm Manager. I try clicking the Wireless Connections Icon. It' still says ON. BUT Inflight Internet changes to:ON, and Phone changes to:OFF, Bluetooth changes to:OFF, Data-Connection is greyed out.
I press it again. Busy sign comes up, nothing changes.
3) I press Phone. It switches to:ON. And InFlight Internet changes:OFF
4) I press bluetooth, and it turns: ON
5) I press Wi-Fi and still nothing changes(Still:ON)
6) I press Data connection. It switched to: ON
7) I click In-Flight:OFF, changes to ON, and turns off PHONE.
8) I press InFlight again, nothing happens.
9) I press Phone, and it turns on the phone. and turns OFF the In-flight.
So... Wireless Connections:ON and the Wi-Fi:ON. Neither one does anything when I click it. Both is always GREEN ON.
ALSO
Under Settings-menu-all setting.
I click Connections and selected Wi-Fi.
"Turn on Wi-Fi" says: ON
I can click on it, and it says OFF
If I check Comm Manager, Wi-Fi is still ON and so is Wireless Connections.
I do a reset of the HD2
ANd I still get the wi-fi telling me theres a signal.Nothing changed. And when I go into "Turn wifi on", its checked again.
That little attenna I get after soft reset, only started after the regedit. I never had the wi-fi on b4 now. But I checked and that is reset to show 1.
"39. Speed Up Web Page Loading Considerably
The following registry tweak will enable almost instantaneous web page loading in the web browser. It apparently enables wireless N mode but seems to work with cellular data too. Go to:
HKLM/Comm/BCMSDDHD1/Parms
11nModeDisable = Change from 1 to 0"
Can't turn off wifi either
I have exactly the same problem, will be forced to hard reset, I think. Does anyone have any ideas?
So, my phones data connection will turn off and i cant send/recieve any data. When i pull up the top little status bar and try to press the button to turn my data connection on, it goes straight to the settings/setup for data connections. The actual button doesnt switch from off to on. Now, as i was typing this post, my data just came on by itself for a minute. now its off again. why wont my little button work lol
I came here through google looking for a solution as I had the exact same problem.
managed to fudge some result:
Go to Settings -> Wireless Controls
Then at the bottom go to Menu -> Connections -> Select Networks
You should have your internet connection (T-Mobile, O2, etc) selected for both drop down boxes. Click on edit for each one and edit again but don't change any settings just click cancel.
Should be working now
Whenever I reboot my new GS5, my wifi does not connect. I get this icon on the system bar and in the pull down I get a notice that "myssid" disconnected Network disconencted. Sign in again.
I go to wifi settings and tap on my connection and then tap on connect and it comes right up, but I have never had the network not reconnect automatically when I was in range.
Any thoughts?
ParrSt said:
Whenever I reboot my new GS5, my wifi does not connect. I get this icon on the system bar and in the pull down I get a notice that "myssid" disconnected Network disconencted. Sign in again.
I go to wifi settings and tap on my connection and then tap on connect and it comes right up, but I have never had the network not reconnect automatically when I was in range.
Click to expand...
Click to collapse
Unfortunately, you didn't give us a detailed description of your settings i.e. how your phone is configured. Sounds like expected behaviour.. based on the way your phone is likely configured. You can optimize your settings or install an app to automatically log you into wifi.
To know for certain, you'd need to make some screen shots and describe your settings for us - not sure why you didn't do that to start with?
.
fffft said:
Unfortunately, you didn't give us a detailed description of your settings i.e. how your phone is configured. Sounds like expected behaviour.. based on the way your phone is likely configured. You can optimize your settings or install an app to automatically log you into wifi.
To know for certain, you'd need to make some screen shots and describe your settings for us - not sure why you didn't do that to start with?
.
Click to expand...
Click to collapse
"sounds like expected behaviour" WHat? I have had smart phones since the Evo 4G and NEVER had my wifi not automatically connect when I cam into range or when the phone was turned on. So far I THINK it is mostly happening when I do a reboot.
"You can optimize your settings or install an app to automatically log you into wifi" I have NEVER had to install anything on any phone or laptop to auto log me in. I don't understand this at all and I am a computer guy. Been working on, building, troublshooting computers for 20+ years.
As for detailed description of settings, it is wifi. There is not that much to set. I am using WPE security and my SSID. The wifi works but when I reboot, I have to maually connect to the network bu taping on the connection in the wifi listing.
If there are spesicif settings you have questions about , let me know what you want to know. but it is wifi. There is not that much to it. I was thinking that maybe this had to do with connection optimizer or something.