since friday my niki phone doesn't vibrate anymore, even if i set the settings for incoming calls, to only vibrate... I don't know why. is there a solution? maybe a registry key?
Sounds like it's broken. Take it back to where you bought it.
solution!
i found the solution yesterday evening. the problem was that i set the registrykey HKLM\Drivers\BuiltIn\AllLedMgr to switch the blinking led off. now i set it to the default setting and it works again...
I had the same problem
I had the same problem, thank you for your solution.
Related
My TyTn doesn't vibrate anymore...
Yesterday it frooze while receiving a phonecall. It frooze so bad that it wouldn't even restart after a hardreset. After playing around, removing battery, sd-card, sim-card, waiting a while, I finally managed to do a hard reset.
So then I took the opportunity to upgrade my Dutch 1.18 ROM to the Cingular 1.34 WWE. Everything went fine (after a few retries).
But now my phone doesn't vibrate anymore. I did a softreset to remove all extra programms but that didn't work either: no vibration anymore.
Anyone had or has the same problem (maybe after a ROM upgrade)?
I fear it's a hardware problem (the next in a row of ...).
Problem solved!
I found a strange solution for my problem, very strange...
In my Sounds & Notifications I always have Events disabled (because I don't want to hear my screen clicks). With this option disabled my vibration always worked.
Desperate as I was I enabled it and much to my surprise my vibration was back!!!
Since this was strange to me I checked my other deveice, a QTEK S100, and at this one my Events also is disabled in combination which the vibration still works.
So back to my TyTn, I disabled my Events again and see: my vibration keeps on working!!! So now my settings are back to where they were and my vibration is also back...
I don't know what to think of this, maybe a registry-setting was set to a wrong value en corrected by my enabling/disabling Events???
(I checked the "flashing service LED" before; that was value 1, enabled, so that wasn't the cause).
Probably something was happened with uninstalling operations or setting some options in some software: changing them caused a mistake in registry keys and the time key for vibrating was blanked.........
Well, however you're very lucky...... isnt' it??
I have a fairly new 8525 (bout a month old) and the problem is it hardly ever wants to vibrate when I get a new mail message. It will at times, but it never wanted to vibrate upon receipt of a new email message. I just figured that's how it was supposed to be until I installed a trial of Wisbar Avanced and it had a setting for "vibrate" to turn on in it...and it worked like it should. It would vibrate anytime I got a new email, even if the screen was off, the device was locked, and i hadn't touched it in a while.
I removed the trial, and now I can't get it to vibrate at all....anyone have any ideas? It's annoying, I want my vibrate back!!!
LiquidHonesty said:
I have a fairly new 8525 (bout a month old) and the problem is it hardly ever wants to vibrate when I get a new mail message. It will at times, but it never wanted to vibrate upon receipt of a new email message. I just figured that's how it was supposed to be until I installed a trial of Wisbar Avanced and it had a setting for "vibrate" to turn on in it...and it worked like it should. It would vibrate anytime I got a new email, even if the screen was off, the device was locked, and i hadn't touched it in a while.
I removed the trial, and now I can't get it to vibrate at all....anyone have any ideas? It's annoying, I want my vibrate back!!!
Click to expand...
Click to collapse
Well initially you need to pin down whether it's a software/registry setting problem or the fairly commom hardware problem.
Can you reinstall the trial of WA and see if this re-instates the vibrate function? I am of course assuming that the device is set to vibrate and that currently it does not vibrate under any circumstances including when st for phonecalls.
Mike
mikechannon said:
Well initially you need to pin down whether it's a software/registry setting problem or the fairly commom hardware problem.
Can you reinstall the trial of WA and see if this re-instates the vibrate function? I am of course assuming that the device is set to vibrate and that currently it does not vibrate under any circumstances including when st for phonecalls.
Mike
Click to expand...
Click to collapse
Correct, it used to only vibrate if it hadn't been locked/asleep. With WA is vibrated as it should. Now it doesn't vibrate at all..........
I reinstalled WA real quick after you posted this to try, and yup, it vibrates like it should with it installed.
Well at least we know its a software issue. I'm using my TyTn to post this so a little difficult to do searches on registry settings for vibrate, but will check later or you could try searching meantime.
Mike
After searching the registry and such, no luck. Anyone have any other suggestions?
Hi, I am a happy user of a HTC TYTN from Argentina . but i need really a big help -
my phone goes wiki ! it doesn´t vibrate any more . I made a soft reset and nothing., i take out the battery , and reset and nothing . just ring the ringtone but when i touch on vibrate only icon , the phone just turn on and off the lights on the screen.
It has do it somethimes but then it fix by itself on a few hours.
this issue happends since the last two days ...
PLEASE HELP !
I'm having a problem similar to yours, mine wont vibrate at all in any way, and i cant figure out why.
Not uncommon, all you need is here:
http://forum.xda-developers.com/showthread.php?t=299163
remember to search folks
Mike
I had the same problem where my tytn stopped vibrating one day. I checked the notification settings and for some reason the vibrating option on all my notifications was turned off.
Last program I installed was the opera mobile 9.5 beta browser. Not sure if anyone else had this problem after installing the browser.
HELP HELP HELP
can anyone save me?
cause i am deaf(so SE x1 is a great choice but WM6.....) i want a phone vibration if recieve SMS message of incoming email.
i even setted it up to vibrate+ led lighting but it dont!!!
I tried all tweakprograms but they dont support it.
so i must regedit it i think, can anyone help me?!?!??!
you could do me a very very big favor if you can help me.
You have it under Settings->Sounds and notifications, and then the Notifications tab.
on8a said:
You have it under Settings->Sounds and notifications, and then the Notifications tab.
Click to expand...
Click to collapse
already did that, im not so stupid like that.
i just 5 minutes ago did hard reset. it works again. that was really strange, i didnt changed it so much.
LED and vibration by sms recieve works again.
but vibration is still too short, with mozart tone.
how i make vibration stronger and longer? i prefer about 7 sec.
Well, I didn't really think you where stupid, but WM isn't really logical sometimes, so splitting phone and notifications settings isn't always obvious.
Don't know if there are any tweak settings for the length of vibrations, but using phoneAlarm you could change how it vibrates.
http://www.pocketmax.net
tttyto said:
how i make vibration stronger and longer? i prefer about 7 sec.
Click to expand...
Click to collapse
have the audio alert last for 7 seconds. The only problem I have is I like the phone to pulse vibrate, but it seems like WM just does a full burst.
I'm having the same issues. ROM is the one that OliNex posted,
It's set in Sounds and Notifications, however it doesn't vibrate. Phone calls do.
I'v tried hard reset, I've tried soft reset, I've tried reflashing, but no success. Is there a registry setting somewhere?
Thanks
UKTamo
PS: My right hand volume control slider, refuses to go above 0 ...
Hi all,
Is there a way to keep turned on the backlight during calls and incoming SMS ?
Thanks.
psykokwak said:
Hi all,
Is there a way to keep turned on the backlight during calls and incoming SMS ?
Thanks.
Click to expand...
Click to collapse
Same question here. But also I would like to set the unit so that phone button and home button turn it on.
I was going to ask the same question
It's little bit annoying feature.
Anyone knows how to turn it off or disable ?
try this:
\HKLM\Drivers\BuiltIn\RIL\FastDormancyRule
from "1" to "0"
It's stopped mine from switching off backlight when I get through to voicemail, for example. I havent checked if it stays off for any length of time after that.
It didnt work.
To wake up the phone (and turn on the backlight) when we receive an SMS, We have to use Diamon TF3D config ( http://forum.xda-developers.com/showthread.php?t=405749 ) to enable the option.