Related
Hope someone can help. I run TT6 and Igo 2006. Both working perfectly until yesterday.. I installed Memory Map and it wouldn't find the GPS (which was set to Sirf Star III). Wouldn't get a lock when I changed it to NMEA.
The difficulty is that now the unit won't get a GPS lock in any program. I have uninstalled Memory Map and done several hard resets but the problem still remains that the GPS light will flash but won't get a fix, however long I leave it.
Have tried lots of combinations of settings to no avail
Ideas?
I was struggling with my three GPS applications for a few weeks without success too. Later, for the one that did not work, I discovered that this GPS software has the feature to automatically find a working comm port for me, and when I chosed that it worked perfectly. I'm not familiar with TT6 or igo, but do they have similar feature, where at the pull down selection window for the port you could choose auto/detect automatically or similar?
eaglesteve said:
I was struggling with my three GPS applications for a few weeks without success too. Later, for the one that did not work, I discovered that this GPS software has the feature to automatically find a working comm port for me, and when I chosed that it worked perfectly. I'm not familiar with TT6 or igo, but do they have similar feature, where at the pull down selection window for the port you could choose auto/detect automatically or similar?
Click to expand...
Click to collapse
i-Go has the option to detect automatically and it works perfectly with the Ameo.
On the main screen tap the Sat Dish icon and the GPS Data screen pops up - you can configure from there.
it is very simple. point the stupid MS GPS sharing applet into nirvana ("none" for hardware port and then in each GPS program use COM5 at 9600 - NOTHING ELSE!
apphoen said:
i-Go has the option to detect automatically and it works perfectly with the Ameo.
On the main screen tap the Sat Dish icon and the GPS Data screen pops up - you can configure from there.
Click to expand...
Click to collapse
I tried that and it detected precisely nothing!!!!
lbendlin said:
it is very simple. point the stupid MS GPS sharing applet into nirvana ("none" for hardware port and then in each GPS program use COM5 at 9600 - NOTHING ELSE!
Click to expand...
Click to collapse
Aaah - if it happens again, I will try it. Thanks for that.
Update: In the end I got so annoyed I had a real huff at T-mobile (because I needed to travel urgently and I just couldn't get it to work and neither could they. They decided to replace it.
apd said:
I tried that and it detected precisely nothing!!!!
Aaah - if it happens again, I will try it. Thanks for that.
Update: In the end I got so annoyed I had a real huff at T-mobile (because I needed to travel urgently and I just couldn't get it to work and neither could they. They decided to replace it.
Click to expand...
Click to collapse
Ah, faulty unit - that expalins a lot. How quickly are they replacing it?
apphoen said:
Ah, faulty unit - that expalins a lot. How quickly are they replacing it?
Click to expand...
Click to collapse
I'm hoping you walk into a store and swap it out. Especially since it's a TMobile device.
ltxda said:
I'm hoping you walk into a store and swap it out. Especially since it's a TMobile device.
Click to expand...
Click to collapse
In the UK it's often a 'courier picks up and drops off replacement' scenario - especially if you bought online like I did.
I answer to your questions, I bought it from a shop (I won't buy these things online!). I spoke to customer services and they agreed to send me a new one and collect the old one. But because I needed it urgently they suggest that I went back to the shop for a replacement. Unfortunately they didn't have one but they found me another local store that did and that store did the replacement. All in all, it took about an hour. Have to hand it to Tmobile on this occasion
apd said:
I answer to your questions, I bought it from a shop (I won't buy these things online!). I spoke to customer services and they agreed to send me a new one and collect the old one. But because I needed it urgently they suggest that I went back to the shop for a replacement. Unfortunately they didn't have one but they found me another local store that did and that store did the replacement. All in all, it took about an hour. Have to hand it to Tmobile on this occasion
Click to expand...
Click to collapse
So is the GPS working yet then? ;-)
apphoen said:
So is the GPS working yet then? ;-)
Click to expand...
Click to collapse
Pleased to report the replacement is working perfectly (although seems to take longer to pick up a signal).
for info tmobile have two standard delivery options if they are shipping a new unit for order or replacement. royal mail special delivery or special delivery before 9am. moan like a b**** like i did and you can get the latter free of charge. if the unit isnt that new (time depends on agreement and whether home or business user) and is faulty they will send a recon unit by courier who will collect the old and give you recon device only. unlike the new option with royal mail which they ship a complete retail packand a prepaid bag to return the old one.
oh and one las thing.... dont think about *accidently* forgetting to send the complete pack back.... or tmobile will charge full retail price for the unit....
Use the search luke.....
It's not a faulty ameo, it's down to memory map, when you select sirf (and by default it's set to nothing, not sirf) it turns off the gps unit. Hard reset is the way to recover it..
How do I know?
Because mine did this..
http://forum.xda-developers.com/showthread.php?t=299046&page=5&highlight=memory
fards said:
Use the search luke.....
It's not a faulty ameo, it's down to memory map, when you select sirf (and by default it's set to nothing, not sirf) it turns off the gps unit. Hard reset is the way to recover it..
How do I know?
Because mine did this..
http://forum.xda-developers.com/showthread.php?t=299046&page=5&highlight=memory
Click to expand...
Click to collapse
Dear Darth
I did use the search and (if you read my original post) I also did several hard resets. The Force is strong in me
I have been reading around and talking to friends about the Touch phone, and could use a little more assistance on enabling the GPS in my phone. Can someone please point me in the right direction?
Thanks,
Robbie
have you upgraded to windows mobile 6.1??
if so, then go to start > settings > Phone > Services tab > make sure location setting is highlighted, click get settings >then make sure it is set to on.
that will make sure that applications are allowed to use your gps signal.
then once you have done that,
open your gps, if you use google maps you have to click menu, use gps.
I have upgraded to the official verizion 6.1 rom. My question is, does gps use data? Is the gps a real gps that connects to satellites or is it some pseudo gps that approximates my location by triangulating distances between my phone and the nearest couple cell towers? I don't have a data plan and don't want an unpleasant suprise on my next bill.
jrb_82 said:
I have upgraded to the official verizion 6.1 rom. My question is, does gps use data? Is the gps a real gps that connects to satellites or is it some pseudo gps that approximates my location by triangulating distances between my phone and the nearest couple cell towers? I don't have a data plan and don't want an unpleasant suprise on my next bill.
Click to expand...
Click to collapse
Yes, the Vogue has a real GPS antena. If you read through the forums you'll find verizon users have to do a bit of tweaking to get it working.
It can be confusing, because our phones also support "agps". This stands for assisted gps. AGPS uses cell phone tower triangulation to get a position.
GPS has inherent errors, in the aviation world there is a system called diffrential GPS. This uses a ground based system to correct the time diffrential error in the sattelites for greater accuracy. Without dgps you cannot use the gps inputs for a precision approach, only enroute, terminal and overlay. We use other systems such as vor/dme. This uses ground based "towers" to get a position using radial and distance information. This is very similiar to what agps does.
to answer the question does it use data?
the answer is yes.
it has to have a data connection in order to receive the gps data.
atleast thats my understanding, as a data connection does start and maintain during my gps sessions.
codybear said:
to answer the question does it use data?
the answer is yes.
it has to have a data connection in order to receive the gps data.
atleast thats my understanding, as a data connection does start and maintain during my gps sessions.
Click to expand...
Click to collapse
No it shouldn't. The data connection you're seeing is probably initiated by the application that needs the internet for transferring maps like Google maps or MS Live search.
If you load up any independent GPS app that uses locally stored maps like TomTom or Garmin, then it shouldn't initiate any data connections.
thanks method man for correcting me.
i didn't think about it that way. haha.
Also a Newbie
I was wondering whether there was an app that I would need to install on my xv6900 to get the GPS working or do i need an external device like the TomTom Go series to get the GPS up and running.
Any help is much appreciated.
Thankyou
How to get GPS to work
acidreflux1 said:
I was wondering whether there was an app that I would need to install on my xv6900 to get the GPS working or do i need an external device like the TomTom Go series to get the GPS up and running.
Any help is much appreciated.
Thankyou
Click to expand...
Click to collapse
The reason it dont work is because GPS tries to connect one way, i belive its phone as modem. and when you browse the internet, it tries to connect as Sprint PCS.
now i might be wrong in that, but just lisen.
in order to fix it you need to do a registry change. get a free program to edit the registry. like PHM RegEdit.
got it downloaded? installed? good. lets move on.
open it up
click on My Device
+HKEY_LOCAL_MACHINE
+Comm
+ConnMgr
+Providers
+{7C4B7A38-somethingsomethingsomething}
+Phone as Modem.
go into that setting, make sure that the key AlwaysOn is set to 0
THIS IS THE IMPORTANT PART
go down a setting from phone as modem to
+SprintPCS
the key inside doesnt have to be set to Always On, but you can enable it if you want.
now close it up. count to 20 and do a restart on the phone
next time you try to run any GPS app it should work. use GoogleMaps though.
also while you are in here you can go into ConnectionSharing. a key above ConnMgr. and make it so you can use your phone as a modem for your laptop. the option was removed in the 6.1 update. let me know if you wish to know how.
6.1 ROM? and GPS
jrb_82 said:
I have upgraded to the official verizion 6.1 rom.
Click to expand...
Click to collapse
I called Verizon regarding the WM 6.1 upgrade and they told me to go to Microsoft's website and download it. Microsoft says go to the carrier's website. I'm confused. I'm using a Verizon XV6900 running Windows Mobile 6 Professional. Are we talking the same thing? Is there a newer version (6.1) than 6 Professional? If so, where can I get it?
Also, I've read about enabling the internal GPS antenna, which appeals to me, but there is so much info with different instructions, talking about Sprint and Alltel, radios, etc. Is there a good (read: easy) set of instructions for this? Also, a list of the possible problems encountered (function, data loss, etc.)? I don't want to be a pain in the rear, but this is not my specialty. But I could really use the GPS capability with my work (real estate) w/o needing an exterior unit. I currently use a DeLorme bluetooth unit, but its a pain.
Thanks in advance, Jim.
jimonfly said:
I called Verizon regarding the WM 6.1 upgrade and they told me to go to Microsoft's website and download it. Microsoft says go to the carrier's website. I'm confused. I'm using a Verizon XV6900 running Windows Mobile 6 Professional. Are we talking the same thing? Is there a newer version (6.1) than 6 Professional? If so, where can I get it?
Also, I've read about enabling the internal GPS antenna, which appeals to me, but there is so much info with different instructions, talking about Sprint and Alltel, radios, etc. Is there a good (read: easy) set of instructions for this? Also, a list of the possible problems encountered (function, data loss, etc.)? I don't want to be a pain in the rear, but this is not my specialty. But I could really use the GPS capability with my work (real estate) w/o needing an exterior unit. I currently use a DeLorme bluetooth unit, but its a pain.
Thanks in advance, Jim.
Click to expand...
Click to collapse
Here is the link to the offical WM6.1 ROM
http://www.pcdphones.com/phone_downloads.aspx?bid=95&cid=1&mid=302&carrier=Verizon Wireless
1. sync your phone with Outlook. You will loose everything on your phone when you flash the new ROM. Files on your memory card will be safe.
2. Unlock your phone with 2.31 & refer to the links below.
http://forum.ppcgeeks.com/showthread.php?t=20370
http://www.atwistedweb.com/xv6900/index.html
3. connect your phone to your computer via activesync & run the ROM file you download. Simply follow the instructions.
4. Your phone will hard reset once the flash is complete. You will have to align the screen & such. The very last screen will ask you to tap the screen to begin using your device. You have to be ready to soft reset your phone as soon as you tap the screen. DO NOT LET THE CUSTOMIZATIONS RUN OR YOU WILL BE SCREWED FOR SURE.
5.Settings--->Phone--->Services Tab select location settings & then hit the get settings button. Make sure Location On is selected.
6. Download the Holus GPS viewer & install.
http://forum.xda-developers.com/showthread.php?t=434408&highlight=holux+gps+viewer
post #3
7. Once the GPS viewer open hit the scan button. This will tell you what port & at what baud you GPS is at. It should be com 4 @ 4800.
8. Hit the open GPS button & hopefully you will get a lock.
phone keeps scanning for satellites
Is this normal? The GPS program ran and continues to search for satellites. Its alomst like it can't find any. I ran it just the way you listed. Anything else I can try?
If you are using Holux GPS viewer and you see red dots then be happy your GPS is working. Usually first lock takes longer. try it on an open place hopefully you will get a lock. The red dots you see on Holux are the satellites that your GPS is seeing, Once it gets a lock you will see blue dots and that's a fix. If it continues to flash red dots, I would try closing and opening port once, that wud restart the GPS.
Once you get a lock, use any 3rd party software like Garmin Mobile XT or Tomtom Navigator 7 if you don't have a data plan. If you have a dataplan then you can use goolemaps too.
Hope it helps..
bwolsen said:
Is this normal? The GPS program ran and continues to search for satellites. Its alomst like it can't find any. I ran it just the way you listed. Anything else I can try?
Click to expand...
Click to collapse
MethodMan said:
No it shouldn't. The data connection you're seeing is probably initiated by the application that needs the internet for transferring maps like Google maps or MS Live search.
If you load up any independent GPS app that uses locally stored maps like TomTom or Garmin, then it shouldn't initiate any data connections.
Click to expand...
Click to collapse
No that isn't true at all,
I have both Tomtom and Igo with map files on the sd card. The phone needs the internet to get the agps information otherwise the GPS programs can't get a lock. It doesn't use much adata at all as I was roaming in the states (from canada) for around 10 days , I used the gps everyday and was only charged under $3 for the whole 10 days.
jimonfly said:
I called Verizon regarding the WM 6.1 upgrade and they told me to go to Microsoft's website and download it. Microsoft says go to the carrier's website. I'm confused. I'm using a Verizon XV6900 running Windows Mobile 6 Professional. Are we talking the same thing? Is there a newer version (6.1) than 6 Professional? If so, where can I get it?
Also, I've read about enabling the internal GPS antenna, which appeals to me, but there is so much info with different instructions, talking about Sprint and Alltel, radios, etc. Is there a good (read: easy) set of instructions for this? Also, a list of the possible problems encountered (function, data loss, etc.)? I don't want to be a pain in the rear, but this is not my specialty. But I could really use the GPS capability with my work (real estate) w/o needing an exterior unit. I currently use a DeLorme bluetooth unit, but its a pain.
Thanks in advance, Jim.
Click to expand...
Click to collapse
http://www.pcdphones.com/phone_downloads.aspx?bid=95&cid=1&mid=302&carrier=Verizon Wireless
Here is the update you are looking for, now.... For the love of the lord, DO NOT LET CUSTOMIZATION RUN!!!
Update your device as directed in the file, when the device updates and restarts, you will see a message that says something like "Running Customization in... 3,2,1 Seconds" or something like that, when you see that, stick the stylus in the hole at the bottom of the device and you will avoid a big pain in the @ss.
EDIT: Oops, i'm too late LOL, didn't refresh thepage while searching the update.
Can't get a lock
I just followed all the steps and installed GPS viewer and could not get a lock. I used the Verizon MR1 rom. Since that did not work I tried installing Valhalla GPS Server to see if that would help. No luck. Any Ideas?
mfpreach said:
No that isn't true at all,
I have both Tomtom and Igo with map files on the sd card. The phone needs the internet to get the agps information otherwise the GPS programs can't get a lock. It doesn't use much adata at all as I was roaming in the states (from canada) for around 10 days , I used the gps everyday and was only charged under $3 for the whole 10 days.
Click to expand...
Click to collapse
I have data blocked on my phone and the GPS worked fine up until about a month ago. Whatever Verizon did blocked my GPS and I have not been able to get is working since. I can still run GPS viewer and see satellites but I can't get a fix on them.
I have everything working now. Thanks.
Just so I have it straight...
When I unlock the phone with 2.31, do I let customizations run? The ppcgeeks thread doesn't specify, but the atwistedweb thread says let them run. What does 2.31 do? Just unlock the phone so I can install the next ROM? Also, the ppc post talks about disabling USB while the other does not. Is there a preference?
When I install the new WM6.1 ROM, the atwistedweb post says to install it from the SD card, while the this thread says via USB. Once again, any preference?
I understand not to let the customizations run for this ROM and by putting the stylus in the bottom hole it resets the machine. After it comes up again, will the phone be (should be) upgraded and ready to use?
Lastly, if my phone gets "bricked" (I guess that means it turns into a battery powered paperweight), you guy can help me out, right?
Man, all of this just to get GPS and Verizon service. Still nervous! And Verizon won't shut my service off or stop tech support?
Thanks again. Trying to get all the info up front so I don't have to later. Jim
jimonfly said:
Just so I have it straight...
When I unlock the phone with 2.31, do I let customizations run? The ppcgeeks thread doesn't specify, but the atwistedweb thread says let them run. What does 2.31 do? Just unlock the phone so I can install the next ROM? Also, the ppc post talks about disabling USB while the other does not. Is there a preference?
When I install the new WM6.1 ROM, the atwistedweb post says to install it from the SD card, while the this thread says via USB. Once again, any preference?
I understand not to let the customizations run for this ROM and by putting the stylus in the bottom hole it resets the machine. After it comes up again, will the phone be (should be) upgraded and ready to use?
Lastly, if my phone gets "bricked" (I guess that means it turns into a battery powered paperweight), you guy can help me out, right?
Man, all of this just to get GPS and Verizon service. Still nervous! And Verizon won't shut my service off or stop tech support?
Thanks again. Trying to get all the info up front so I don't have to later. Jim
Click to expand...
Click to collapse
Make sure you have backed up everything. First you need to unlock with the .40 unlocker. Then flash to the sprint pre-GPS ROM (This will downgrade your radio which is said to be dangerous but I have never heard of anyone hurting their phone while doing it correctly. This will also require you to call Verizon and get a new A-key. If they ask you what happened just tell them that you had to hard reset your device because of a bad program. Go through all of their steps and it will all get fixed. You have to call Verizon because you wont be able to make calls.) DO NOT LET CUSTOMIZATIONS RUN! You'll know they're about to run beacuse there will be a pop up saying they're going to run in 3 seconds (or something like that). As soon as you see that pop up stick your stylus in the reset hole. Then unlock with the 2.31 unlocker. After you use this unlocker you wont have to unlock again. Ok now you flash back to the Verizon MR1 ROM. DO NOT LET CUSTOMIZATIONS RUN! Once again you'll know they're about to run beacuse there will be a pop up saying they're going to run in 3 seconds (or something like that). Now after you do this your GPS should be working but I was never able to get it to work with the Verizon MR1 ROM. So I recommend using NSFFAN's 6.5 ROM. Now when I unlock and flash ROM's I don't disable the USB thing your talking about. I also flash everything through my computer (USB) and not through the SD card. There is a small chance you can brick your phone but if you do everything carefully and correctly it's a very very small chance. Just make sure you are doing everything right before moving on to each next step. If a phone is bricked I don't think it can be recovered but i'm not 100% sure. Lots of times when there are problems though it's not a bricked phone and just a glitch so if you have anything that doesn't seem right just come on here and ask for help. Verizon won't do anything with your service except fix your phone like I said earlier unless you tell them what your actually doing. I don't know what happens then and I don't want to find out.. What they don't know won't hurt them Feel free to PM me if you have any questions or need any help.
Now that Verizon finally has unlocked the GPS on a new device, I am curious about what navigation software and performance everyone is seeing. I tried TomTom 7 on my Imagio and it is lagging about 10 seconds. I haven't had time to really give it a good test, however it was a little concerning. How is your GPS working for you?
Same with me, Navigator is too laggy to work. I've installed Nav4All (free at nav4all.com) and it works great but is very rudimentary.
Goggle Maps works fine but not TTS so the search continues...
Interesting, I was using version ttn7.915.9196 for the record. I saw somewhere that there is a newer version for the TP2 out but i think it only added the ability to use the keyboard. I noticed that on the TomTom sight it only shows the Iphone edition I wonder if they are tweaking it for the new rev of WM phone. I think i might buy Copilot 8 if we can't find a fix considering its only something like $35.
Copilot 8 works great!
I use Ostia from pharosgps.com.
It was lightning fast to locate me, compared to using my old Tilt.
This is my third phone using Ostia and have to say currently liking it best.
GPS
You must first use HTCs Quick GPS. It speeds up the lock on the satellites. Google maps finds my location within seconds and Bing in less than a minute
Hormazdd said:
You must first use HTCs Quick GPS. It speeds up the lock on the satellites. Google maps finds my location within seconds and Bing in less than a minute
Click to expand...
Click to collapse
Is QuickGPS a memory hog? And is it always on? I'm a little afraid to install it.
In the meantime, I have always like Garmin software. Garmin XT works very well on the Imagio. I got it off of ebay for about $25. It's also got lots of connected services, like nearby gas prices, flight times, google search, weather etc.
no quick gps isn't a memory hog and should already be on your device. The way it works is:
The GPS chip receives a synchronized timed signal from the satellites (birds) the US DoD launched into orbit. Each bird uses a different channel. With a good signal from three or more birds, GPS starts to get a fix. It does this by calculating the time difference between the reception of the different signals, then calculating the relative distances to each of the birds, then figuring out where it sits in the middle of the birds.
The GPS calculates four spheres, and its located somewhere on the surface of each of these spheres. There is only one point where these four spheres intersect. That's you.
If you're good at geometry, you might think that it needs 4 birds to get a fix, but in fact, if the GPS assumes that you are on earth, that provides another sphere, so it only requires 3 birds to get a decent fix. More adds altitude and accuracy.
But the GPS needs to know where each of the birds is before it can decide where IT is. That information is not calculated, but is available in a detailed download of orbital data provided by the DoD called ephemeris data. It is transmitted...from the bird to your GPS. For a cold start, your GPS needs to download the entire file, without interruptions in the signal - BEFORE it can even start getting a fix. In fact, the GPS may not even know which channels to tune into, since it doesn't yet know which birds are currently overhead. This causes a slow first fix.
Quick GPS, is simple. Ephemeris data is passed thru WiFi or cellular data connection ahead of time, and you never have to wait for it to download over the satellite. Awesome.
Click to expand...
Click to collapse
I'm using IGo8 and it works perfectly.
I'v been happy with Bing for Maps/Turn-by-Turn GPS, with the bigger screen of the Imagio it's more than adequate for my needs. It also has gas prices, movies, and speech recognition which is very nice. Use Quick GPS to cache satellite info and it locks very quickly after that.
makryger said:
Is QuickGPS a memory hog? And is it always on? I'm a little afraid to install it.
In the meantime, I have always like Garmin software. Garmin XT works very well on the Imagio. I got it off of ebay for about $25. It's also got lots of connected services, like nearby gas prices, flight times, google search, weather etc.
Click to expand...
Click to collapse
Isn't Quick GPS already on the Imagio. I don't remember installing it on mine and its been working great.
Boss428man said:
Isn't Quick GPS already on the Imagio. I don't remember installing it on mine and its been working great.
Click to expand...
Click to collapse
It is if you go into the All Applications area from the TouchFlo Start Menu.
Boss428man said:
Isn't Quick GPS already on the Imagio. I don't remember installing it on mine and its been working great.
Click to expand...
Click to collapse
I was confused, when I opened up QuickGPS, it said "Download", so I assumed it was like the Windows Marketplace icon, and that you actually had to download the program first. I was wrong- download means download GPS Data.
makryger said:
I was confused, when I opened up QuickGPS, it said "Download", so I assumed it was like the Windows Marketplace icon, and that you actually had to download the program first. I was wrong- download means download GPS Data.
Click to expand...
Click to collapse
Correct, and it will auto-close after as it's not needed to stay running to work, just download cache files and exit.
Give it a try it has always worked will for me
IGO 8 is by far the best navigation software takes some tweaking to get it to work but if you do some searching you can find what your looking for on the net. Garmin XT uses a bit less program memory and still works well but not near as slick as IGO. Make sure you use latest possible release and maps.
Is it Igo 8 or OnCourse 8 in the US. I went to the site and found it a little confusing. Looked pretty nice either way.
Can't get Tomtom to work
On the topic of GPS programs, I have used Tomtom Navigator 6 (purchased version) for some time. Worked great on my AT&T fuze, but when I tried to install it on the imagio, it looks like everything is smooshed to the top of the screen, and is unusable. I contacted Tomtom, but they replied simply that it was an unsupported phone. I guess I'll have to try a different program. Anybody else had issues?
sdph said:
On the topic of GPS programs, I have used Tomtom Navigator 6 (purchased version) for some time. Worked great on my AT&T fuze, but when I tried to install it on the imagio, it looks like everything is smooshed to the top of the screen, and is unusable. I contacted Tomtom, but they replied simply that it was an unsupported phone. I guess I'll have to try a different program. Anybody else had issues?
Click to expand...
Click to collapse
I've been using TomTom for years too. On my PDA's and winmo phones. I didn't install it on the Imagio because I was going to get the latest maps from TomTom and see if they had any software updates. But all they have on their site now is iPhone and zip for winmo, so it looked to me like they were dropping windows support, so I dropped them.
I can get by with Google Maps and/or Windows Live Search (Bing) - and for turn by turn I'm now using the $35 CoPilot 8. Works real well, but I have very limited time on it so far.
I was going to switch to Garmin XT, but you need a completely dedicated microSD for that - that's a deal breaker.
My friend installed wm 6.5 on his wing and he is having a similar problem with TOMTOM being very laggy. I think its a wm 6.5 issue and not and Imagio!
Anybody got this working on the hero?
I saw it on the gadget show where the presenter was seeing her friends current position (who was carrying a gps enabled phone) on her pc in real time and she was able to see where she was going etc.
Now i have paired up the pc and my hero but when looking at my profile on the pc it gives my position of a day ago or 23 hours ago!
Is it possible to see in "real time" or is it only able to see past locations?
Thanks in advance
Gaz
It's working right out of the box for me.
I've been using it since I got my hero.
It works great, I can see all my mates on it in real-time too!
Make sure you've set it up properly...
I set it up on igoogle on my laptop and just added a friend(my hero) and thats all i did. but like i say it doesn't show in real time!
Is there anything in particular i should check for?
Thanks
Gaz
I don't think so, since Latitude worked for me right out of the box, as I got my Hero (before it I was using Latitude on a Windows Mobile device). No configuration was needed at all.
@ngel said:
I don't think so, since Latitude worked for me right out of the box, as I got my Hero (before it I was using Latitude on a Windows Mobile device). No configuration was needed at all.
Click to expand...
Click to collapse
Hmm. No special requirements are needed from the laptop or anything? Just seems strange.I can pair with the laptop ok but it always shows onw day ago???????
Gaz
Google Latitude works fine for me.
Not in realtime but it works
realtime would mean everyone have to update their location all the time with enabled GPS. oh god my battery
Gazaman said:
Hmm. No special requirements are needed from the laptop or anything? Just seems strange.I can pair with the laptop ok but it always shows onw day ago???????
Gaz
Click to expand...
Click to collapse
Latitude works regardless of the device running it: if a GPS receiver il available you'll get the maximum precision, on a regular phone your location will be fixed out (rather well, to be honest) using WiFi hotspots well-known location, carrier geolocation (if available and applicable) and a number of other less obvious methods.
So, on your Hero it'll work using GPS, WiFi or cell tower location: a laptop is not required.
So, if Latitude isn't working for you I can suggest a double-check at its website, looking for some wrong setting. Please note that you'll have to explicitly activate your location sharing, as it's turned off by default. See here: http://www.google.com/latitude/apps/badge
oooops.............schoolboy error!!!
My calendar was out by a day hence being out by 24hrs....Sorry guys but didn't feel the need to check as it shouldn't be wrong
Do i keep having to refresh the page then to see where it is?
Sorry once again folks
Gaz
I've had the imagio for about 2 weeks not. and can't get the GPS to work. I've tried every reg edit I can't find. Tried useing GPSID.dll rather then GPSID_HTC.dll. I tried installing the GPSModDrivers. Ran QuickGPS. Done Hard resets and half a dozen flashes. Nothing. The only program that works in Verizon's VZ Nav. TomTom, Google maps, Bing never get any sat lock. I'd say it was my phone but my dad's and the floor model at our Verizon store all have the same problems. The guy at Verizon said it was an issue with a lot of them and HTC was working on an updated rom for it. But that could be crap. Any ideas?
You probably have a faulty unit - my GPS always locks pretty quickly.
Agreed. My GPS works flawlessly. I use it all the time with TrackMe.
Never had the first problem with the GPS , works great with Google and Bing maps. Yours Dad's phone must be defective , swap it out for a new one.
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Sorry for the double post working from device.
Keep in mind that some of the things you may have installed to correct the issue may have negatively affect registry settings, sync your contacts and do a hard reset on the device. And do not set up VZ nav when you bring it up.
Then do this:
Install Google maps
Make Sure your Location Setting is "on" in the phone settings. If it is on then toggle it to "911" hit okay on upper right corner then go back into it and toggle it back on and hit okay.
Soft Reset and let boat up completely
Open Google Maps And make sure USE GPS is not checked.
Click "X" in top corner to let it run in the background
Run Quick GPS and select "Download"
Open Google Maps again and select "USE GPS" make sure you have a clear view of the sky and it should take less than one minute to lock
Sometimes a soft reset is required to get a gps lock.
Actually, It is a known issue with the particular gpsone chipset. It's an issue with location caching with agps, but this phone comes stock with agps disabled. However, I have not heard that many complaints on this forum, of course not everybody uses gps. If you soft reset before you try and use you shouldn't have issues. Trust me this is my third HTC touch series phone with this issue (diamond, touch pro, imagio). With my imagio it suddenly stopped having this issue, wierd. I used to use a program called HTC gps tool on my touch pro that would clear the cache for you without having to soft reset each time you might want to do some searching, not sure if it works with wvga screens.
bastukee said:
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Click to expand...
Click to collapse
I concur if it was a hardware issue VZ nav wouldn't work.
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
One of my friends had the same problem as you mentioned. I asked him to do a hard reset and after a HR, the GPS has been working smoothly. Please try a HR!
I have no complain about my Imagio's GPS because it works much more than I expected. I can get 7-8 sattelites fixed in house, near the window where my old phone Touch HD could not fix any sattlelite.
I'm about to try bastukee suggestion. Giakhoa are you saying do a hard reset after a hard reset?
bastukee This is what I got, any ideas?
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,*31
$GPGLL,,,,,,A*11
$GPGSA,A,1,,,,,,,,,,,,,50.00,50.00,50.00*35
bastukee said:
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
Click to expand...
Click to collapse
Let me know how this pans out. I haven't used this new version but it will allow you to play around with some setting my gps locks instantly so I'm not going to mess with it I just now it works on vga, you might need a screen rotate app to read all settings.
Original Post where I found it is here
Sweeny, Program works nice. it's an easier way to see the data then the program bastukee gave me. But sadly I don't know what half the options do and it still gives me the same date I posted in #12. Thoughts anyone?
That's exactly what you would get when satelites are not being seen, in fact you can't even see a Clock. Once I finish this 3 day trip to India and settle I will try that program and see how my settings look like and post screenies. "I'm a zombie atm"
Thanks for the help. I'm going crazy trying to get this to work.
While bastukee is on his trip, anyone else have any ideas?
hackthis02 said:
While bastukee is on his trip, anyone else have any ideas?
Click to expand...
Click to collapse
be sure ur using com port 4
There's where I got the data that matched the data bastukee showed me. And the one in the settings.
I might be pointing out the obvious but, did you try this outside? After like a minute?