I have just bought a Cruise and it connects fine to my Parrot CK3000. The problem is however that the sound is much to loud. Changing it with the button on the side does not help. It makes no difference if the slide is completely at the top or at the bottom.
Does anybody know how to change the volume on the carkit??
When you are in a call just use the dial thingy of the carkit and turn it counter clockwise. Should bring the volume down.
You can also set the volume in the settings of the carkit when you're not in a call.
edit: Which one do you have btw? Cause I'm beginning to thing you have the new CK3000 without the display . Although my guess is that turning the dial when in a call does the same: change the volume.
edit2: I've just come up with a brilliant idea!: http://www.parrot.com/usa/support/userguides
RaptorRVL said:
When you are in a call just use the dial thingy of the carkit and turn it counter clockwise. Should bring the volume down.
You can also set the volume in the settings of the carkit when you're not in a call.
Edit: Which one do you have btw? Cause I'm beginning to thing you have the new CK3000 without the display . Although my guess is that turning the dial when in a call does the same: change the volume.
Click to expand...
Click to collapse
CK3000 does have neither display nor wheel.
Only accept/refuse buttons.
Sascha
Oh my, thát one . Damn parrot calling all their carkits 3000 :/
Online manual here for that one:
http://www.parrot.com/guide_chm/CK3000/
Which says nothing more than:"Setting the volume: Volume is adjusted on your phone".
I'm not sure how the volume might work with the bluetooth connection. Take into consideration that changing the volume when you're not in a call only changes the system volume. When you're having a phone call, only then you are changing the volume of the call.
When clicking the speaker icon when you're not having a phone call shows two sliders, one for the system volume and one with a little phone as icon. That one is not for the call volume but for the ringer volume.
So in short there are three types of volumes. System, ringer and call. Playing with the system volume and the call volume could be worth a shot.
Yes that is the problem. When I adjust the volume during the call nothing changes. The volume slider is shown, but it makes no difference if it is at the max or the min setting. Somehow this does not work. I have software version 3.13.
Any suggestions??
Hi Tim,
just click on the speaker at the top to change the volume DURING a call.
regards Yoshi
Hello Yoshi,
I tried this but I got the same result. I can slide the volume indicator to minimal but the sound volume stays the same.
Any other ideas maybe.
I encounter the same problem that Tim B. I can not modify the sound of CK3000 from the phone.
When I change the volume during a call, no changes. The volume is too loud !
epsimax said:
I encounter the same problem that Tim B. I can not modify the sound of CK3000 from the phone.
When I change the volume during a call, no changes.
Click to expand...
Click to collapse
This is a Touch Cruise problem.
It does not allow to change volume on blutooth handsfree profile.
You'll encounter the same problem with bt headset. Only there, you're usually able to adjust volume on the headset itself.
Apperently HTC thought that there aren't any bluetooth handfree device around which do not allow to change volume.
In my car the ck3000 is just loud enough, but I use bigger speakers.
Sascha
Related
i use O2 xda flame
i wanna it automaticly adjust the in-call volume to the top when i inputed a number and pressed the "talk"button,Or when a incoming call comes and i pressed the "answer" .
the reason why i need it:my flame(perhapt also yours)'s volume in call is always too small(not at the top) even your vomlue bar is at top.and which is more seriosly,sometimes a call comes,you pressed the answer,and you may hear nothing(but he/she can hear you w/o problem).
the two problem above can be solved by pressing the volume+ key during the call,and as soon as you pressed it,you can hear him/her in highest volume,but....
sounds it's easy,but i need to press it almost every call.i hate doing repeated things.so,is there a software can help me "press" the volume+ key?
check out phone weaver
Using the profile of phone weaver, you can adjust the in-call volume.
Morning XDA people
Have one slight issue that really bugs me with my HD2 the ring volume is so damn loud its hazardous lol now I know your gonna say turn it down but when listening to music I have to turn it back up again and then forget to turn it down again....
Any way I can separate the volumes better was literally thinking of taking the wav file for my ring and decreasing the DB its saved with, but slightly longer work around than wanted not ideal!...
Many Thanks in advance,
Crafty...
I used the following registry tweak to lower the call volume, and it's worked great for me on the old ROM and latest ROM. However, I've posted this a couple of times now and it's received a mixed reception. Some say it doesn't work at all, and some say that a second incoming call is way too quiet. You can give it a shot a guess, and if it doesn't work just change your registry back.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
snerkler said:
I used the following registry tweak to lower the call volume, and it's worked great for me on the old ROM and latest ROM. However, I've posted this a couple of times now and it's received a mixed reception. Some say it doesn't work at all, and some say that a second incoming call is way too quiet. You can give it a shot a guess, and if it doesn't work just change your registry back.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
Click to expand...
Click to collapse
Many Thanks for the Reply Snerkler, I don't think I explained my issue that clearly it is actually the ringing volume that really gets me rather than in call volume. I use my headphones and turn the volume up to max and then when removing the head phones if I forget to turn the phone down the ringer is crazy loud.
Hope this is clearer
There are 3 volumes in WM phone. Incall, ring, and system.
Incall volume is highly problematic in HD2, but at least it has nothing to do with the other two. It can only be changed during call.
The other two, ringer and system, are both linked by default. But that can be easily changed by settings/sound & display/single volume - off.
Like that you will be able to control both volumes independently. On my phone that meant that you control ringer only with HW keys. That can be changed to system only, check here:
http://forum.xda-developers.com/showthread.php?t=610334
but for some people no such tweak is needed.
But again .. there is special incall volume which can be changed only during call. So no volume setting before the call, ringer or system, affects incall volume.
I want to mention this problem though i know it has been questioned previously with no answer.
When during a call you raise the bluetooth headset volume then the phone doesnt remember the setting and you have to raise the volume after the next call and again and again.
Very annoying!!Also raising the bt headset volume then the volume control opens and the ringer sound is raised too and i need to lower it after each call!!
Any solution on this?
Thanks!!
solved it
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
When for any reason the volume goes down again, click the volume button in the earphone, just to stimulate it, set your prefferred settings for ring volume etc and then soft reset and the high earphone volume is back.
It is not a complete solution, of course, but it is better than having to raise and low the volumes after each call.
Up to now there is not a better solution to this problem.
If someone knows a better registry setting or tip solution he can post it.
Another problem also is that sometimes the last call button is accidentally pushed in the bluetooth earphone and the last call is activated.
I will try to find the setting that disables last call through bluetooth if there is any.
has anyone else tried this? I have this problem with the t-mous version of the hd2.
NIKOSXRI said:
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
Click to expand...
Click to collapse
if this works you are a life saver I have had this problem for over 3 months now with no answer I will give it a try and answer back!
edit: it works!!!
I've just tried this, and get the following error:
Error : System.FormatException: FormatException at System.Number.ParseUInt32() at System.UInt32.Parse() at RegeditService.RegeditResponse.Send() at httpserv.Services.Service.sendResponse() at RegeditService.RegeditService.Exec() at httpserv.HttpServerWorker.run()
Any ideas?
i entered the value as dec...with total commander you can change in hex also
with this cab that I found here you can restore the original wm sound manager and the HD2 'remembers' the sound volume and keeps it at the highest level even with a bt headset!
NIKOSXRI said:
If someone knows a better registry setting or tip solution he can post it.
Click to expand...
Click to collapse
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!
lawalty said:
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!
Click to expand...
Click to collapse
There is no "in call volume" setting in volume locker. Which box did you check in order to activate the in call volume?
TMOUSA HD2, latest stock ROM.
I searched about this problem on the web with Google, and on this forum, and have not yet found a solution. I hope that someone reading can help me.
This has nothing to do with the system volume, nor the ringer volume, both of which I have set to max.
It only involves in-call volume, hearing the other party talking to you. I have this same problem whether the sound is coming directly from the handset pressed against my ear, or with a bluetooth headset.
Whenever I receive a call on the HD2, at first the sound of the other party's voice is WAY too low. I cannot understand anything they say, do not know who it is, in fact I barely hear anything. (That, despite, both the system and ringer volumes both set to max.)
Then, I press the volume up on the volume rocker several times, or the volume control on my bluetooth headset, and finally I can hear the person talking to me.
That is a hassle--that when someone calls, at first I barely hear anything, don't even know who it is, or what they said, until I press the volume up rocker several times.
It seems like, regardless of system and ringer volume settings, that with an incoming call, the volume is initially set at a VERY low level.
Is there a way that can be fixed--registry tweak, etc.?
I may have come across a fix for this, but am not sure.
I did a search for the word "Volume" in the registry.
One key and value I came across was the following key:
HKLM\Services\HTCAP\SmartHandsetVolumeControl\Handset
I took the value InCallVolume, and changed the dword data to the number which I think represents max volume: 4294967295.
I think that has helped with the problem of the initial call volume on receieved calls being too low. I'm not sure yet though, as I have not received many calls since.
I see many different volume control values in the SmartHandsetVolumeControl key and its subkeys, and cannot say I understand them.
Is there someone reading who really understands what these different registry volume settings mean?
Today I checked voice mail. Therefore a call I placed to voice mail, not an incoming call. I wasn't using a bluetooth headset, but had the phone directly to my ear. I heard the voice mail recording way too softly, could hardly make it out. I pressed the up volume rocker, and it didn't make any difference, I could barely make out the voice mail. (By the way, this was after I made the change mentioned above.)
I think the HD2 has a lot of strange quirks regarding volume, and I think these registry keys may hold the key for dealing with them. If anyone reading really understands the HD2's volume registry keys, please help us to understand them.
Thank you.
PS
I found the following page:
http://www.techparaiso.com/windows-...t-phone-volume-levels-on-windows-phone-device
which describes volume registry settings in \HKCU\Control Panel
It is really confusing, all the different volume settings in the HD2 registry, some generic to WM 6.5, and others specific to HTC and the HD2.
If someone really understands how all these volume settings interact, it would be great if a guide to them were posted!
Thanks in advance.
I couldn't get this to work. Does anyone know how to change the call volume via the registry? My phone crashed when I try to do it via the hard buttons on this ROM.
Updated my galaxy s to 2.2 last night and now I can do the bluetooth voice dial but the volume is too low. The Bluetooth in-call volume is set by default and 50%, how do I fix this without turning up the volume manually every call?
Thanks
to be more specific, its the womans voice that is too low when she ask for a number. How do you raise the volume by default
use the volume up/down from the bluetooth headset
im saying at the time the call number is requested, the volume bar on the phone called "bluetooth in-call volume" is at 50% and I can barely hear the womans voice unless I manualy turn up the volume on the phone. The problem is I have to do it every call and want to know how to change the default setting
No one else has this problem? I really need help with this
All the views and only one reply, can anyone at least confirm if they have the same issue?
Thanks
Have the same problem but with the nexus S on 2.3.3. I would say it is an inconvinience to keep adjusting the volume everytime you try to make a call. I have yet to find a setting to change the default.
There is an APP that will set the bluetooth volume when a headset is connected. Search market for "bluetooth volume" by nightshade. This does NOT help for the stupidly low volume of the lady that provides voice prompts though - just allows a preset override for the in call volume.