Database Users

Good regedit for PocketPC WM2003SE

Anyone can suggest a good regedit for PocketPC WM2003SE?
I try PHMRegEdit, but looks like it is for old version of PocketPC.
Thanks
Arto

Registry Editor
Resco Registry from Resco Explorer, last version 5.13, but actually i still like PHM.

I can't even get PHM Regedit to install on my Qtek S100. Looks ok when I run the installer, but nothing is ever actually installed.
As it is still my favourite I have tried a number of times, with hardresets between, but no success.

I believe PHM registry editor is what we called here a "green" software, i.e. you can just copy and paste the exe file anywhere you like and execute it and it will work. So if you have exe file (e.g. from a former installation, a backup or another ppc), you don't need to install it.

Tried again by getting the CAB file instead of the desktop installer. Worked like a charm!

bamse,
Where you put or run the .cab file?
Thanks.
Arto

nowhere in particular : a .cab file ca normally be executed from anywhere...
Are you using cabinstall ? Because sometimes it conflicts with some .cab files. It doesn't work for instance with the icon .cab file of Agenda Fusion : when you click on this cab file, nothing happens... but it's the only .cab file that doesn't work for me...
Hope this helps...

Just copy the cab file to anywhere on your device. Then on the device, open up explorer and browse to the location of the cab. Double clicking on the cab will install it.

Just copy the cab file to anywhere on your device. Then on the device, open up explorer and browse to the location of the cab. Double clicking on the cab will install it.
After this you don't need the cab on your device anymore so if it has not been automatically removed you can just delete it.

If it has not been automatically removed it means :
- that you're using CabInstall (because miscrosoft standard installer deletes tha .cab file once installed !)
- or that nothing has been installed because of an error

Anyone can suggest a good regedit for PocketPC WM2003SE?
Click to expand...
Click to collapse
How about using Tascal RegEdit? I've been using it for a long time.

cayotte said:
Anyone can suggest a good regedit for PocketPC WM2003SE?
Click to expand...
Click to collapse
How about using Tascal RegEdit? I've been using it for a long time.
Click to expand...
Click to collapse
Tried it when I couldn't get PHM Regedit to install but didn't like it. With TRE you can't even search through the registry, right?

shortcut to games folder?

hi folks,
have spent most of the day searching the forum and must be missing this
is there a way to create a shortcut that will open the games folder? wanting to use with slithers c++ cube
many thanks
chris

\Windows\Start Menu\Programs\games

ather90 said:
\Windows\Start Menu\Programs\games
Click to expand...
Click to collapse
LMFAO!!!!!! He should ask more questions in the Slither Cube thread....

ather90 said:
\Windows\Start Menu\Programs\games
Click to expand...
Click to collapse
cheers for the assistance I tried that one, the link comes up as intrusted / unsigned
works fine as a direct link through programs , just not through the cube
any ideas?

First Go here then try here

no joy so far
tries shortcut creator, been through the lnk thread... again....
tried google...
there must be a way to shortcut to a specific folder???

if you read the actual 051 thread, slither discusses this many times and says it won't be available until 052

I think it involves passing a parameter to fileexplorer...
Look at this post: http://forum.xda-developers.com/showpost.php?p=2120755&postcount=140

chrisd1a1 said:
hi folks,
have spent most of the day searching the forum and must be missing this
is there a way to create a shortcut that will open the games folder? wanting to use with slithers c++ cube
many thanks
chris
Click to expand...
Click to collapse
create a link to your file explorer
tap and hold
select properties
add '-windows\start menu\games' to the end of the link so you should end up with something like
program files\file explorer.exe -windows\start menu\games

cheers for the help folks, still no go.
will have to see if slither can resolve in the next release

bbobeckyj said:
create a link to your file explorer
tap and hold
select properties
add '-windows\start menu\games' to the end of the link so you should end up with something like
program files\file explorer.exe -windows\start menu\games
Click to expand...
Click to collapse
I got it wrong, no '-' before the address
"fexplore.exe" windows\start menu\programs\Games
exactly as above in the properties of any .LNK will do it

bbobeckyj said:
I got it wrong, no '-' before the address
"fexplore.exe" windows\start menu\programs\Games
exactly as above in the properties of any .LNK will do it
Click to expand...
Click to collapse
cheers mate but vust links to the 'my device' page on file explorer no matter what i do.
have looked into and edited folderview.exe so it should route to an alternative folder but the signature is not taking via msigner.
was thinking that this might be the 'simple' way but must be doing something wrong, was thinking set the shortcut to a generic option (ie Windows/Start Menu/Programs/Test) would give some flexibility (we could just add/rename folders in the program list
any idea what i am doing wrong on the resign?
edit: unsign/resign done will work on the edit to see if i can get this to work

chrisd1a1 said:
cheers mate but vust links to the 'my device' page on file explorer no matter what i do.
have looked into and edited folderview.exe so it should route to an alternative folder but the signature is not taking via msigner.
was thinking that this might be the 'simple' way but must be doing something wrong, was thinking set the shortcut to a generic option (ie Windows/Start Menu/Programs/Test) would give some flexibility (we could just add/rename folders in the program list
any idea what i am doing wrong on the resign?
edit: unsign/resign done will work on the edit to see if i can get this to work
Click to expand...
Click to collapse
well i can find the path, edit the path and run on my xda...
but the dam think defaults to the program folder no matter what i do!!!!
anyone any ideas?????

Please try this It's part of Wisbar Advance 3, Start Panel. Files in folder my documents > my documents and exe put somewhere.
http://ike-dats.thez.info/public/startpanel.rar
If you have problems with startup (blank white page) and using wktask or programs like this, make exception to run always in background. Then to refresh list you must restart it.

IkE Blaster said:
Please try this It's part of Wisbar Advance 3, Start Panel. Files in folder my documents > my documents and exe put somewhere.
http://ike-dats.thez.info/public/startpanel.rar
If you have problems with startup (blank white page) and using wktask or programs like this, make exception to run always in background. Then to refresh list you must restart it.
Click to expand...
Click to collapse
Hi IkE Blaster, Spot on, works perfectly!!!! is it possible to edit the config to allow folks to choose the folder?
if this works, it is a configarable menu option that will work with any 3rd party app
all credit to you!!!!
hope you dont mind but have added the link to Slither's c++ cube thread

rename this .txt file to .LNK and you should have it

bbobeckyj said:
rename this .txt file to .LNK and you should have it
Click to expand...
Click to collapse
thanks for trying, this works as a seperate link but not through the cube??? for some reason it brings up Internet Explorer????

You can change the "url" of folder in config file, if you select for example start menu, than can you change folder tapping the top curtain. But you can go only in includes folder. I can't explain it, try it yourself

cheers man,
appreciate the work
thanks for your help

IkE Blaster said:
Please try this It's part of Wisbar Advance 3, Start Panel. Files in folder my documents > my documents and exe put somewhere.
http://ike-dats.thez.info/public/startpanel.rar
If you have problems with startup (blank white page) and using wktask or programs like this, make exception to run always in background. Then to refresh list you must restart it.
Click to expand...
Click to collapse
Is their a way to elaborate a bit further on this solution?? I have WA3 but no idea on how to use this?

Help Me?

Im having a little trouble installing the manila theme. i tryied to install this theme http://mikil.deviantart.com/art/HTC-Glass-98139581 but its doesnt work. I put the 2 manila files in the windows folder and it told me to over write but its gave me an error. Also what is that program called like i seen many vidoes of people controlling the htc diamond on there desktop. like you can use your mouse and click the applications in the phone.
Thanks

You cant use the orginal filebrowser, you can use totalcommander

does anyone know who to install the manila files?!? because when i move it in windows folder i get an error about you can't overwrite it, because those files is used by windows or something like that.

tango3 said:
does anyone know who to install the manila files?!? because when i move it in windows folder i get an error about you can't overwrite it, because those files is used by windows or something like that.
Click to expand...
Click to collapse
I use Resco File Explorer (not freeware) to copy and overwrite files. Had no issues. Though it costs, it is a must have program. Has a great registry edit that comes along with the purchase.

totalcommander is freeware and it will solve your problem.. follow the link below to get the apps
http://forum.xda-developers.com/showthread.php?p=2286376
Cheers!

alken00 said:
totalcommander is freeware and it will solve your problem.. follow the link below to get the apps
http://forum.xda-developers.com/showthread.php?p=2286376
Cheers!
Click to expand...
Click to collapse
Total Commander is that a Total Comander.
You can do as you please.

How to use and install things on your HTC Diamond.

Hi.
Can anyone of u plz tell me how to use open gl and how to install thongs like Diamond cubes themes and more. Plz teach me how to do this cuz i cant get this things to work. I wana use me htc for something funny not just use it like a phone.
plz help me if u can.

I am not an experienced person, but I try to answer you.
you need a file called CAB. Download the CAB file for a particular program.
Never unzip it. The CAB file itself acts as a exe file.
1) Sync your diamond to the PC with active sync.
2) copy the cab file to your diamond
3) double click on the cab file.
4) Install either on your ROM or internal memory
Good luck!

Google is your friend.

If your new to Pocket PC devices, check this out.
Regards,
Carty..

Thx guys for great help

I have been all over this site, ppcgeeks and sprintusers and maybe I am on brain overload, but I do not understand how to install manila files. I have done programs and cabs. I have all sorts of tweaks and changes on my diamond. I am trying to change just my icons. i have downloaded many of the files that people create, but cannot figure out where to get them to install. any help anyone could pass on will be sooo appreciated. I have Diamond TF3D Config, I have Diamond Tweaks and I have PHM RegEdit...what am i missing?

I have the same question as Kndracing. Dont know what to do with the manila files.

lexster said:
I have the same question as Kndracing. Dont know what to do with the manila files.
Click to expand...
Click to collapse
Copy them to your \Windows folder with Resco Explorer or Total Commander.

so why use total commander and not just drag the manila into window\, pls. fill me out with more details. Thank you.

lexster said:
so why use total commander and not just drag the manila into window\, pls. fill me out with more details. Thank you.
Click to expand...
Click to collapse
Because ActiveSync/File Explorer can't copy files with System attribute and Total Commander can. Apart from that, it is a way better file manager than the system one. And unlike the desktop version, it is free.

Joppiz HTC LOVER said:
how to install thongs
Click to expand...
Click to collapse
Maybe because I'm tired, but this made me laugh.

[SOLVED] Resco Explorer in ext package

Does anybody has Resco Explorer in ext package?
Tried to do it but i miss resco registry and resco ftp.
Thanks!!

What exactly do you want to get? I have it (selfmade).... But it's free for sure....
One more thing - I use OEM regular structure - not EXT (For OsBuilder). It's a normal package - with rgu and dsm.... Registry is a separate cab - you should add it to the package. FTP is a part of explorer - just added features.

AndrewSh said:
What exactly do you want to get? I have it (selfmade).... But it's free for sure....
One more thing - I use OEM regular structure - not EXT (For OsBuilder). It's a normal package - with rgu and dsm.... Registry is a separate cab - you should add it to the package. FTP is a part of explorer - just added features.
Click to expand...
Click to collapse
Well, in Resco site there is one cab for all the subprograms that are included in the resco 2010 8.10 version.
It is this cab I tried to convert to ext package.Everyrhing works except registry function.
Thanks anyway.

Attached is the app.reg (renamed to app.txt because of forums limitations) file that I use for Resco Explorer with FTP and Registry plugins added.
I didn't clean it up so it also contains the keys and values for the options and settings that I prefer having.
For future reference, I had the same issue as you at first then I used a tool called Kheb to monitor the registry changes that happen when I install cabs and customize everything. Kheb can also make diffs between different registry snapshots and even generate OEM packages based on such diffs.

I did apply your REG file, but Resco Registry not work yet, the problem is a SETUP.DLL in to the Resco Explorer CAB, it contains a secret instructions and I believe that is impossible to open it, anyway I saw some cooks with Resco Explorer and Registry in their ROMs, it's obvious that they know the secret.
I also want to know.....pleaseeeee

justintxu said:
I did apply your REG file, but Resco Registry not work yet, the problem is a SETUP.DLL in to the Resco Explorer CAB, it contains a secret instructions and I believe that is impossible to open it, anyway I saw some cooks with Resco Explorer and Registry in their ROMs, it's obvious that they know the secret.
I also want to know.....pleaseeeee
Click to expand...
Click to collapse
Make the package with cab to package software (there is in all kitchens) and then replace the reg and app.dat files with the ones attached and cook it.Works for me.
The idea goes to MusicMonk but his attached file doesnt work for me.

Just use Kheb like MusikMonk suggested; it will capture all of the reg keys that are installed by the setup.dll. You can also look in the setup.dll with notepad and probably see the keys that are installed.
If you're trying to backup you registration info, it's stored in a file in \windows called wmtrigger.dat. All of Resco's registration codes are stored in that file, so if you have several of their apps, that's all you need.

NIKOSXRI said:
Make the package with cab to package software (there is in all kitchens) and then replace the reg and app.dat files with the ones attached and cook it.Works for me.
The idea goes to MusicMonk but his attached file doesnt work for me.
Click to expand...
Click to collapse
I did apply your REG file but not works for me, anyway thanks for your help, mate.
I made a CAB file from the original Resco Explorer CAB, I deleted all files except SETUP.DLL and later run it and VOILA!!! the Resco Registry works !!!!!
Unfortunately I don't need it, I need the secret instructions in SETUP.DLL, I did open it using UltraEdit but I can't find nothing.

try this it should work, but your still gonna need the code as this is not cracked

Thank you, mate, but I found the secret reg keys in the setup.dll file. I used CeRegEditor to create a registry image, later install the cab with setup.dll and I created a image again, and finally I compared the first and second image to detect the differences.
I made a new reg and all works now
Thank you very much mates

fully working resco explorer package
Fixed some shortcuts added rtoday plugin, resco update, task manager that was missing and ftp in previous packages and is attached below.
Of course it needs the usual registration process.

NIKOSXRI said:
Fixed some shortcuts added rtoday plugin, resco update, task manager that was missing and ftp in previous packages and is attached below.
Of course it needs the usual registration process.
Click to expand...
Click to collapse
Have you managed to have in built registration code in it so that you dont have to feed the registration key after the installation?

c_shekhar said:
Have you managed to have in built registration code in it so that you dont have to feed the registration key after the installation?
Click to expand...
Click to collapse
The registration code is in the wmtrigger.dat file in windows folder which is created after registration.
So you have to copy this folder after registration and put it in your kitchen.

NIKOSXRI said:
The registration code is in the wmtrigger.dat file in windows folder which is created after registration.
So you have to copy this folder after registration and put it in your kitchen.
Click to expand...
Click to collapse
Thanks a lot. I was looking for this clue sinse ages.
BTW: how did you discover this?

c_shekhar said:
Thanks a lot. I was looking for this clue sinse ages.
BTW: how did you discover this?
Click to expand...
Click to collapse
All Resco products write registration to one file It's well known for ages and it's no need to discover anything. So if you decide to use several resco products - you should install and register them all and then save the summary wmtrigger.dat - it will be one for all installed Resco-s..... And for sure - system User name should be the same for all your roms - it's also fixed in that file...
One more tip: if you occasionally decide to use cracked resco products - you will get a conflict if you use for example one legal and one cracked program simultaneously in one rom. So better use all registered.

AndrewSh said:
All Resco products write registration to one file It's well known for ages and it's no need to discover anything. So if you decide to use several resco products - you should install and register them all and then save the summary wmtrigger.dat - it will be one for all installed Resco-s..... And for sure - system User name should be the same for all your roms - it's also fixed in that file...
One more tip: if you occasionally decide to use cracked resco products - you will get a conflict if you use for example one legal and one cracked program simultaneously in one rom. So better use all registered.
Click to expand...
Click to collapse
Thanks a lot. Added to my knowledge bank..

c_shekhar said:
Thanks a lot. I was looking for this clue sinse ages.
BTW: how did you discover this?
Click to expand...
Click to collapse
You can use sktracker in your phone.
This program traces the changes in registry and files so if you create a snapshot with the program and then install or register applications or change the options and user settings in applications (you better do it program by program) you can easily find the changes and apply them each time you change your rom.
I apply all mods with sashimi but there are other choices also.

NIKOSXRI said:
You can use sktracker in your phone.
This program traces the changes in registry and files so if you create a snapshot with the program and then install or register applications or change the options and user settings in applications (you better do it program by program) you can easily find the changes and apply them each time you change your rom.
I apply all mods with sashimi but there are other choices also.
Click to expand...
Click to collapse
I used to find the registry part of any cab or software by saving the registry and comparing the one before and after with the help of registry workshop on my PC, but did not know that there exists a utility with which wmtrakker.dat"" type of new file creation can also be found out.
Thanks a lot bro!!!

It's very good

Does anyone know how to backup Resco Customizations ( e.g ToollBar Shortcuts etc ? )