Hi
ON my nokia I had wap access to check headlines and football scores. How do I enable the same facility on an XDA ?
You need to run a seperate WAP browser, like EZ WAP. Search the boards here for EZ WAP and you'll find links to places to get it. Once you have it, there's a great WAP config description for T-Mo at:
http://forum.xda-developers.com/viewtopic.php?t=3675
Hope this helps
I've tried following the steps given in several different threads for configuring this on my XDA but have been unsuccessful. I've been trying to use EZWap to configure it, but it cannot connect. I think its something to do with my network connections on my phone that just arent right. Can anyone walk me through setting up the actual network connection settings for WM2003? Any help would be greatly appreciated.
i installed the mms from the O2 uk rom... (from zip posted here somewhere)...
i get mm2 notifications, but i cant download them...
any ideas?
WAP using IE in WM2003
Supposedly IE in WM2003 has support for WAP browsing. However, when I set up a "TZONES" connection and set up the AP to ( wap.voicestream.com ) and the proxy to ( 216.155.165.50:9201 ), and I try to navigate to:
wap.myvoicestream.com
It no longer works. However, if I navigate to any "regular" www page, it comes up just fine. Has anyone else successfully been able to configure their WM2003 ( TMobile PPCPE ) to access their TZones via IE using the WAP connection/Proxy settings ?
I was thinking of installing EzWap 2.5 again, but during the install it said it was going to replace wapdrv.dll and I wasn't going to run the risk of overwriting a necessary file, so I exited the installation of ExWAP.
Anyone gotten this to work ???
[/b]
Eureka !!! You don't need EzWap or Klondike !!!
<Edited - It was LarryH from Horward Forums who originally helped me out with this...it was his idea to try out a different URL monicker. Thanks again Larry ! >
With LarryH's help, we've discovered that it IS possible to access T-Mobile's TZones pages once you've undergone the upgrade to WM2003 from T-Mobile's SITE.
After you set up your connection to use the WAP accesspoint:
wap.voicestream.com
Under Proxy Settings:
WAP: 216.155.165.50 port: 9201
SWAP: 216.155.165.50 port: 9203
You don't have to set the HTTP or SOCKS,
as TMobile doesn't support SOCKS, and the HTTP port ( 80 ) is already open on their gateway server.
To access your TZones homepage, just open IE, and enter:
wsp://wap.myvoicestream.com
apparently entering:
http://wap.myvoicestream.com
will confuse IE in WM2003 for PPC, and
it will say "Unable to find page".
Everyone, enjoy your TZones under WM2003.
Marcelo
but my MSN Messenger don't work
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
do i need to set up something else? or purchase other data plans from tmobile?
Re: but my MSN Messenger don't work
yfei said:
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
I just tried that on my PPC PE and I was able to sign on to MSN Messenger. Are you sure you have the Connection you set up to access the proper proxy address and ports. Make sure you setup the user/password for your msn account properly, because if you type it in wrong, it won't let you log in.
Let me know if you run into any problems.
Marcelo
Click to expand...
Click to collapse
Awesome !!!
Now I can have MSN Messenger using T-Zones / WAP access. This is wonderful.
Now with just WAP, I have acesss to port 80 & 110 and MSM messenger.
Thanks a bunch!!!!
-JB
t-mobile UK ??
Does anyone know the WAP settings for t-mobile uk ?
OK my settings are:
cellular line GPRS
access point name: wap.voicestream.com
user name password and domain all blank
proxy settings this network connects to the net check
this network uses a proxy server to connect to the net checked
proxy server is 216.155.165.050
under the advanced part all but socks are set to same IP
WM2003
I connect to GPRS but it says page cannot be found
any ideas why?
figured it out and took out the proxy stuff and access the web now.
I would also like the uk settings and a fool proof step by step instruction, please.
Thanks for any guidance
After setting up access to my Gmail account through the native email tool, when I do a send/receive, I get and error saying:
"Cannot connect with current connection settings. To change your connection settings, tap Settings. etc..."
The only time I can do a successful send/receive is when my X1 is connected to my laptop - then I get all my emails. I have already appplied Windows Mobile 6.1 Hot Fix for Sending POP and IMAP E-mail.
I suspect some settings might be wrong - everything else is working fine. Am even getting 3G in SoCal using AT&T on MediatNet. My settings are as follows:
Access point name: wap.cingular
Domain: <blank>
Proxy Setting
Proxy Server: wireless.cingular.com
HTTP: wireless.cingular.com:80
WAP: <blank>
Secure WAP: <blank>
Socks: localhost:1080
Could anyone help? Thanks in advance.
almost certainly its because you are using a WAP connection.
I've never been able to use POP or SMTP on any phone through a WAP connection.
Try using the APN for cingular full internet
a quick google comes up with:-
APN: isp.cingular
User: [email protected]
Pass: CINGULAR1
but don't quote me, and you may need to check with cingular whether they need to change something their end to enable you to use that APN
Im pretty new to email on my phone but i had the same problem i.e. if i was on wireless i could get mail but if i connected via gprs i would get the same error, can not connect etc, i had to set up and new account with the same details as the account which would send and recieve via wirless and tell it to connect via t-mobile internet as there wasnt an auto option, so i now have two accounts for the same email one accesses via the internet and one via t-mobile internet, you can change this if you edit account setup.
Not sure if this is your problem or if i have read it wrong.
Hope this helps
Hi Masseur,
Thanks for the pointer. I did try but looks like it made no difference. Not sure what's wrong from my settings.
Anyone else has seen this? Would appreciate any help. Thanks.
Folks,
Someone in another forum pointed me to the solution. As it turn out, gmail doesn't work off proxys with AT&T. The automatic setup for AT&T had the proxy checked. All was needed is to take out the proxy and just keep the http settings. Working now!
Hello!
I own a htc diamond and want to access a wifi network that's using a HTTP proxy. I can connect to the network itsself. However, the proxy settings aren't applied or sometimes deleted when I disactivate and reactivate wifi. When I try it at home, it can still access the internet even if I set the proxy server. (I don't have a proxy server at home, so it shouldn't work then...)
With a iPod Touch/iPhone the following settings work:
Server: server-01.hak-reutte.ac.at
Port: 8080
I also have to authenticate using an username and password, but I think there's also a web form so it's not necessary to configure that in the proxy configuration.
Thank you,
Simon
SimonKnight6600 said:
Hello!
I own a htc diamond and want to access a wifi network that's using a HTTP proxy. I can connect to the network itsself. However, the proxy settings aren't applied or sometimes deleted when I disactivate and reactivate wifi. When I try it at home, it can still access the internet even if I set the proxy server. (I don't have a proxy server at home, so it shouldn't work then...)
With a iPod Touch/iPhone the following settings work:
Server: server-01.hak-reutte.ac.at
Port: 8080
I also have to authenticate using an username and password, but I think there's also a web form so it's not necessary to configure that in the proxy configuration.
Thank you,
Simon
Click to expand...
Click to collapse
If you use ActiveSync or Windows Mobile Device Centre verify the connection settings are NOT set to automatic. If they are then the Proxy settings are overwritten each time you connect to your PC to sync. If you want to use a proxy over WiFi then you need to make sure your 'Work' connection settings specify the proxy and you need to configure the WiFi settings to 'Connects to Work' (or whatever it says, but NOT 'Internet').
Andy
Hi ADB100!
Thanks for your answer. The problem occurs even when I'm not connected to ActiveSync. Somehow the proxy server is reset when the WLAN is used. I tried the application WmWifiProfiles, but the problem is still there. When I set the proxy server and exit the settings application, the settings for HTTP proxy are somehow not saved. (When I reopen the settings dialog, the http proxy setting is blank, but the proxy for socks is still there.)
Regards,
Simon
SimonKnight6600 said:
Hi ADB100!
Thanks for your answer. The problem occurs even when I'm not connected to ActiveSync. Somehow the proxy server is reset when the WLAN is used. I tried the application WmWifiProfiles, but the problem is still there. When I set the proxy server and exit the settings application, the settings for HTTP proxy are somehow not saved. (When I reopen the settings dialog, the http proxy setting is blank, but the proxy for socks is still there.)
Regards,
Simon
Click to expand...
Click to collapse
Do you have proxy auto-discovery on?
Code:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
EnableAutoDetect=00000001
If its set to 1 then proxy auto-discovery is enabled, 0 is disabled.
I have no idea if it is this but worth a shot?
Andy
Hi ADB100!
AutoDetect wasn't acticated. (The key didn't exist.) I tried creating the key with value 0 and 1, but didn't help.
I think this must be a bug, because there are a lot of topics about this problem. Unfortuntatly, nobody seems to have a solution for this problem .
I tried changing the registry keys in HKLM/Comn/ConnMgr/Providers/. That worked, because the internet connection was dead then . I think it's possible to work around the problem by changing this keys. I will try that next week and when that really fixes the problem, I'll probably release an application for it.
However, do have some ideas left?
Thanks,
Simon
Bizarre....
I have never seen this on any of the Windows Mobile PDA's I have had.
I know if the connection settings: 'This computer is connected to:' are set to anything other than 'Automatic' then it resets any proxy you configure. I have mine set to 'Work Network' and the settings are never overwritten. I use a proxy at home and remember playing around with these settings as I had similar issues initially.
I know there is a known issue of the 'Hidden Proxy' if you let the device configure itself using the 'Connection Setup'. I have never let my device do this and have manually configured the HSDPA/GPRS settings.
Andy
Hi ADB100!
I've also aborted the connection setup, cause I didn't want my device to use HSDPA automatically.
I'm not 100% sure but I think my old device (HTC S730) had also some problems with the proxy, but I was able to solve them. Maybe it's also a problem with my ROM.
How stable/fast are the current RC builds of 6.5? Are they ready for every day use?
Thank you,
Simon
SimonKnight6600 said:
Hi ADB100!
I've also aborted the connection setup, cause I didn't want my device to use HSDPA automatically.
I'm not 100% sure but I think my old device (HTC S730) had also some problems with the proxy, but I was able to solve them. Maybe it's also a problem with my ROM.
How stable/fast are the current RC builds of 6.5? Are they ready for every day use?
Thank you,
Simon
Click to expand...
Click to collapse
I haven't tried any 6.5 ROMs for any period of time as they all seemed too buggy. I am on an almost stock 5.2.19212 ROM that I have lightly customised in a kitchen and I am happy with it.
Andy
This is really annoying... When you search the forums for "wifi proxy" you'll get more than 10 threads with the same problem, but without a solution.
You are using a wifi router with proxy at home and it works, right?
I'll upgrade to 6.5 now, maybe this fixes the problem...
Thanks,
Simon
SimonKnight6600 said:
This is really annoying... When you search the forums for "wifi proxy" you'll get more than 10 threads with the same problem, but without a solution.
You are using a wifi router with proxy at home and it works, right?
I'll upgrade to 6.5 now, maybe this fixes the problem...
Thanks,
Simon
Click to expand...
Click to collapse
Yes, I have MS ISA 2006 and it works.....
Truely amazing. I've upgraded to 6.5 and the problem is still there :-(. I've the radio from the latest official diamond rom. Could an other radio fix the problem?
//edit: Just to describe my problem further: When I set the proxy, exit the dialog and reopen the dialog, the proxy is there. When I open the internet explorer then, the http proxy gets deleted. However, the socks proxy is kept. This is kind of frustrating...
Thanks,
Simon
Read this one: http://www.htc.com/www/faqs.aspx?p_id=13&cat=0&id=36792 According to this article wifi + proxy should not work. What can I do now?
// Update: This looks extremly promising: http://forum.xda-developers.com/showthread.php?p=1990412#post1990412 I'll try that immediatly and post the results. If that works, I'll build an application to simplify applying the fix.
Thanks,
Simon
My status is too. Please help me!
It's a bug, that's sure. I finally got the proxy working, but after reconnecting the proxy settings were blank again .
Just to let you know I was also having problems with proxies and a google led me to this thread. For me, the advice in post 2 worked perfectly. I am using a 6.5 rom on a Touch HD.
Hi SivEd!
Did you also have the problem that your proxy settings get reset when you reconnect to the wifi network?
I've written an app that resolves this issue, let me know if you want to test.
Hi Anks!
Please upload your app, this is a real problem for me.
Thanks,
Simon
Simon, sent you a PM.
The problem seems to be fixed in recent Windows Mobile 6.5 builds, at least for me. I'm using build 21812. Unfortunatly, proxy authentification seems not to work in Opera. In Internet Explorer a dialog appears where I have to enter my username and password. Opera doesn't display such a dialog. But the main problem (proxy setting gets deleted) has been resolved.
HTH,
Simon
I have a problem with using the proxy.
I have mobile internet, but need to use a proxy server to get my e-mail from work. The only problem is that when I have the proxy ON, some programs don't have connection to the internet.
Is there a way to make a manual selection of which programs use the proxy and which don't?
many thanks!
Timo
I got same problem. I want a solution.
Hello
I'm trying to get an HTTP proxy working while on 3G on my phone. I've tried pretty much every proxy app I could find and I've tried adding the proxy IP and port to the 3G settings as well, no luck.
The proxy uses username/password authentication, I think that's what's causing the issues.
If anybody successfully set up HTTP proxy on their DHD, please enlighten me