Related
After owning my Orange M700 for 6 weeks I finally remembered it had a camera when I wanted to take an emergency shot yesterday. I noticed there's an option to take normal pictures and another one that tries to initialise the GPS signal. I eventually get a green bar next to the camera icon so I presume it is connected. Can anyone tell me what I can do with this? I've searched all over and there seems to be no mention of this function anywhere. The only difference I have noticed between this and normal photos is that it saves them into a "My POI" folder.
TIA
Leigh
From what i gather, the GPS Camera function allows you to take a picture of a place and add it to your "Points Of Interests" in your GPS program. So if you want to go to that "Special" place again, you can find it as a POI in your GPS software (I use TomTom 6 and im pretty sure it'll work in that)
Leigho, where do you see the option to turn GPS on? I can't find it on mine!
Cheers
The GPA Camera function saves GPS data with the image - so using software like Picasa from Google lets you see where (google earth) the photo was taken.
crankshaft said:
Leigho, where do you see the option to turn GPS on? I can't find it on mine!
Cheers
Click to expand...
Click to collapse
If you mean from within the Camera function you click on the arrows in the top left hand corner until you see a camera icon with a little target over the top of it. A box will then pop up saying Initializing GPS and when it finally connects you get a little green signal icon next to the camera one which I presume means it is connected. From my experience it seems to connect a bit quicker than TomTom or Google Maps.
If you mean any other application it just starts automatically. It certainly does with Google, TomTom and Cameraware.
leigho said:
If you mean from within the Camera function you click on the arrows in the top left hand corner until you see a camera icon with a little target over the top of it. A box will then pop up saying Initializing GPS and when it finally connects you get a little green signal icon next to the camera one which I presume means it is connected. From my experience it seems to connect a bit quicker than TomTom or Google Maps.
If you mean any other application it just starts automatically. It certainly does with Google, TomTom and Cameraware.
Click to expand...
Click to collapse
i still cant find that function on my m700. have u done anything to yours to enable it?
hoyler30589 said:
i still cant find that function on my m700. have u done anything to yours to enable it?
Click to expand...
Click to collapse
obviously, u need to have a GPS-enabled ROM first....i assume that you do?
I don't have that option either! I get all the other types of photo and video formats but none with a target symbol. My rom version is 1.23.61.5.
Sorry about that. I should have said that I am running MUN's WM6 ROM so maybe that makes a difference.
GPS Today
I am very impressed with this program so far. Found it at
http://www.freewareppc.com/download/travel/gpstoday.shtml
Like Google Maps but with a Today Plugin.
Works easy and fast!!
Try it!
Mobo
Sounds cool, I'm trying it now. Here's a link to the full page with the description: http://classic.pocketgear.com/software_detail.asp?id=26396
Application Description
GeoTerrestrial GPSToday is a lightweight today screen plugin that will allow you to utilize the full capabilities of your device.
* It utilizes intelligent algorithms to always maintain and display a fix on your position right on your today screen, without draining the battery.
* Always see your full street address, not just geo-coordinates.
* Currently WORKS in the US only!
* Slide the red icon over to the right to start the GPS in continuous mode, or single-tap the red icon to start the GPS in quick-fix mode.
* GPSToday always shows the distance to the nearest contact from your device's address book.
* Single tap to create a new contact with your current location as the address, or save the current location as an existing contact's address. Imagine not having to type the full street address on the PPC keyboard!
* You will never need the stylus to use GPSToday!
* Speed, heading and satellite data is shown clearly on the today screen whenever the GPS is running.
* In-pocket tap protection. A single tap on the today screen only operates the GPS in quick fix mode. To fully start the GPS in continuous mode requires an iphone like sliding motion, guaranteeing no pocket accidents.
* Single tap from the today screen to access fully draggable online maps!<
* Always see all your address book contacts on the map. Just tap a contact to quickly call/email or send sms.
* Single tap from today screen to quickly do a yahoo local search around your current position and see the results on a live map. Just tap a result to call or open the website.
* High quality Yelp Reviews for local search results!
* Fetch the full street address for any point on the map.
* GPSToday automatically disables data access when your device goes into roaming mode.
* And many more features.
* Best of all, its free!
Update Description
Added Note: Currently Works in the US only!
i'm trying t too
I'm really curious how can it be "without draining the battery" when internet is active and gps is active. If those two features are active then battery must be drain more than normal usage. Hopefully, someone can measure it. If it is true, we can have GPS open all day long without worry about battery drain and in the same time no need to wait for "cold" boot and have instant gps when open tomtom or other gps application.
I had it on my device for the last few days and while it does offer direction, speed, etc it does consume battery life. It stays active and when it hits open sky, begins the search. Several trips home from work monitoring my speed yielded a very warm battery...
I'm really curious how can it be "without draining the battery" when internet is active and gps is active. If those two features are active then battery must be drain more than normal usage. Hopefully, someone can measure it. If it is true, we can have GPS open all day long without worry about battery drain and in the same time no need to wait for "cold" boot and have instant gps when open tomtom or other gps application.
Click to expand...
Click to collapse
There should be no extra Battery drain with GPS on because GPS doesn't require the transmitter to be turned on like the internet access does.
The receiver in the unit always stays on (so you can get calls) so receiving satellite data doesn't require any more power than normal.
The internet connection DOES drain the battery though as it needs to turn on the transmitter each time it sends data.
i used it this morning and last night.
first off, it leaves the data connection active while it updates your location/address so yeah, it drains the battery. i lost 10% or so in about an hour of constant use. but keep in mind that also had the screen on while i was watching it. next, its a little buggy because, for me, it would stop GPS'ing when the screen shut off and once the screen came back on, it would get the sats for about 20 seconds then stop. i have to go into the map, choose MORE, and chose run GPS to make it stay on. all in all, its a really neat app, i love the speed part.
I just found this the other day and tested it. One problem I had was I had to go to the map to keep my connection open. It kept turning on and off until I clicked on the map and it didn't turn off afterwards. I didn't have to keep it open. I just opened and closed it. It seems to get a pretty quick connection when outside. It seems to be a memory hog I think for what it does. I start at 11 mb with just this on the Today screen using NexVision rom, which I usually started at 15. I like the plugin. I wish it didn't use at much ram as it does.
OK.. I might just be lame but I ran the cab on this.. Did the soft reset and there is nothing installed for it.. In my programs there is no listing for it and on my storage card (where I installed it) there is only a listing for a help file that does not open...
Any ideas??
RevSand said:
OK.. I might just be lame but I ran the cab on this.. Did the soft reset and there is nothing installed for it.. In my programs there is no listing for it and on my storage card (where I installed it) there is only a listing for a help file that does not open...
Any ideas??
Click to expand...
Click to collapse
NM... just installed it to the device and it works.. hmmm not a fan of it there but it will have to do...
Asphyx said:
There should be no extra Battery drain with GPS on because GPS doesn't require the transmitter to be turned on like the internet access does.
The receiver in the unit always stays on (so you can get calls) so receiving satellite data doesn't require any more power than normal.
The internet connection DOES drain the battery though as it needs to turn on the transmitter each time it sends data.
Click to expand...
Click to collapse
If you delve a little bit deeper into how GPS receivers work, you'd understand that it actually does draw quite a bit of power. Also, the mogul does not use aGPS, which uses the cellular tower information to help get a faster fix without as much effort on the part of the GPS chip. Your explanation of "The receiver in the unit always stays on (so you can get calls)" doesn't make any sense in this case since the technologies do not rely on each other.
To prove my point:
Turn off the cellular radio on your phone in the comm manager. Turn on Bluetooth. They both use a receiver, however bluetooth uses far less power than the cellular radio. Your battery will last longer. The GPS radio also uses power, perhaps less than cellular, but more than not using it at all.
BOTTOM LINE: Leaving GPS on will eat your battery. Period.
it's a today plug in. if it doesnt show up, reinstall it to your device
This program makes my mogul really slooooooooooow...
hmmm, I was really trying to prevent downloading on device but i'll do it and hope all works.
Update. I now see the gps but my phone is slow as dirt. Cant even click on Start or anything....whenever I receive a new message I get same issue...bout to soft reset again to see if it works a little better....
seems to be running better just needed time to boot up I guess....should we be changing anything on GPS settings? I feel like I just got a new toy man...
Seems like a cool new toy.. I cannot wait to get outta the cave I am working in right now and see how well it really works with a sat signal...
Dishe said:
If you delve a little bit deeper into how GPS receivers work, you'd understand that it actually does draw quite a bit of power. Also, the mogul does not use aGPS, which uses the cellular tower information to help get a faster fix without as much effort on the part of the GPS chip. Your explanation of "The receiver in the unit always stays on (so you can get calls)" doesn't make any sense in this case since the technologies do not rely on each other.
To prove my point:
Turn off the cellular radio on your phone in the comm manager. Turn on Bluetooth. They both use a receiver, however bluetooth uses far less power than the cellular radio. Your battery will last longer. The GPS radio also uses power, perhaps less than cellular, but more than not using it at all.
BOTTOM LINE: Leaving GPS on will eat your battery. Period.
Click to expand...
Click to collapse
and besides that, even if the gps doesnt need extra power to recieve GPS data it still has to do something with the data, that means the processor is running, stuff is being written to and from RAM, then displayed on the today screen, all this takes more power that doing nothing
anyway, i ended up having to prime the GPS with google maps to get this thing going, and the today plugin flickers rather annoyingly (and its definately eating the battery, i got it charging now but its charging up a lot slower than usual)
hmm, i have google maps on my laptop for mobile. I will attempt to install later. as far as the gps working, I was driving to work and it showed me how fast I was going and how far i was from work. I didnt even put it to search for work but it must have found the address somehow in my phonebook?
I'm lookin at the program and its linking to an Autozone that is 5,397.7 miles away from me. I know which one they are referring to since i saved that name and number but i'm pretty sure its closer than 5 thousand miles from me...WTF
i'm still trying to learn how to use this...
program seemed REALLY cool.. but while it was installed and looking for a signal it seemed to REALLY lock up my phone... I could not do anything on it for a couple mins. I will keep an eye out for a newer version when it comes out since I did really like the concept of this program...
Thank you
Hi all,
First, its wonderful to see so many positive comments about the software just days after its first release. Now we know we are on the right track!
Secondly guys, apologies for the bugs/issues you faced, or are still facing. This is still version 0.9, so its actually a beta release (not that that's an excuse!). Also please excuse us for the lack of documentation.
About the "without draining the battery" part, I agree the language is somewhat confusing. It was meant to compare with the consumption that would occur if the GPS were actually running all the time. You'll agree that if you start up the GPS at 8:00 in the morning on a typical Phone-PDA and leave it running non-stop along with an active internet connection, it will not last until noon. With GPSToday one can get the same benefit throughout the entire day. There have been some inconsistencies though, with some users reporting almost no perceptible change in battery life, and some being seriously affected.
Please note that tapping the red icon on the today screen is intentionally meant to temporarily start the gps, obtain a fix if available, and then stop. To start the GPS in continuous mode from the today screen itself, drag the red icon over and drop it onto either of the two icons on the right. Once you are done, you must remember to stop it by repeating the same gesture. Also, try this once if the automatic mode is not able to get a fix the first time you go outdoors.
Memory: our tests indicate significantly less than 1MB consumption when the map window is closed, and about 1.5 Mb overall when the map window is being actively used. We agree this is a bit high (but nowhere close to the 4mb one of you is reporting). Some of this is also an offshoot of the fact that it uses up only a tiny amount of storage memory, < 200kB. Nevertheless, expect to see ram usage being reduced significantly in later versions.
Lastly, please fetch the latest version 0.9.1 which fixes some battery life issues and other minor fixes, from Pocketgear at http://classic.pocketgear.com/software_detail.asp?id=26396. Make sure the download filename is GPSToday091.CAB. We recommend a soft reset immediately after installtion. We also promise that from v 1.0 onward soft resets will not be required!.
Thanks!
GT, Inc
I search for a GPS Program for fishing! I want save my position on water and 2 days later the program navigate me to the saved position!
Try this: http://www.cradle-software.de/en/software/gpsspot
It works very fine, not limited just for fishing. I'm using it often to find my car LOL For some people it may be good at night, when returning back home from a pub
looooooooooooool i dont think they would make much sense off the 3 inch display like that
Thanks! And sorry for my bad english!
But where do you get a serial?
Buy it of course. Didn't notice you want freeware
2,90€ is almost freeware THX for this tip - the program looks quite interesting
I test it, but its not that what i´m looking for. it have to be preciselier. or maybe with same card where i can see the piont.
i would recommend using Garmin. you can save any point to the gps program (much like any GPS) but with Garmin, as you are just browsing the map, it will show you all the points when you are approaching without having to 'route' to it. it's perfect if you have many fishing spots on the lake and simply want to jump from one spot to another (again, without having to have the program 'route' to it).
Try this:
http://www.freewarepocketpc.net/ppc-download-where-is.html
I haven't tried that one myself (it has problems conecting to some in-built GPSs accordingto the comments and I can confirm this with my X1), but it looks pretty good and is still in dev.
Or this is a great GPS programme that might help:
http://www.freewarepocketpc.net/ppc-download-turbo-gps.html
a lot more features than you need, buy being able to store waypoints and showing them on live plots could be useful. I thoroughly recommend this app and have been using it for a couple of years now.
-FM
Update:
Latest version of 'Where Is' seems to work fine with the X1.
It's got a really nice simple interface and, if its granularity is enough, it should do exactly what you want.
Where Is will show a warning that it can't connect to the GPS until it acquires a lock - tap the icon that looks like a notepad to view the raw GPS log and if you see data then it's seeing your GPS fine and will lock as soon as it has enough sats.
I originally thought the GPS needed to be switched to 'unmanaged' by unchecking the box in the WinMo External GPS settings, but this seems to be a red herring. Maybe a soft restart of the device was what got it working, or maybe the message about not being able to connect to the GPS was just misleading.
Hope this helps,
FM
hi, i have had an unusual issue in that the GPS on the device does not work any more, it did before around 2 weeks ago when i used google maps with the compass working as well.
i have tried soft resets and to check the com ports (i am unsure of the defaults for com port, is it 0?) and have tried to set them manually and also to allow the device to automatically set them. The digital compass has allways been working.
i have installed a fue gps applications recently, since i last used the gps successfully, and have noticed the gps not working in any of these and then not working in the pre-installed applications;
(installed in descending order)
-iGO 8
-GPS sport computer
-wifi fo fum 2
-GPS speedo
-hd speedo
-gps cycle computer
i have uninstalled these since and the GPS still is not being picked up in the digital compass application and google maps (both the preinstalled apps on the original ROM out the box, and were working with gps around 2 weeks back).
i have made sure i am always in clear sight of the sky, but no prevail their.
if some one could please help me on what to do to regain the functionality of the gps again, i would be great full.
p.s. has anyone else had this issue or a similar one?
Try downloading something with setelite tracker. GCZII is such application (good for geocaching btw).
Sometimes, the GPS has wrong satellite data. You will see (on the satellite tracker) it can receive some signal, but the satellites will not show above you, but let's say all to the north.
Go to start/tools and run QickGPS and download new data. That should help. It will download current data via internet. But it may help not. Sometimes bad data on these servers are the source of the problem.
So next thing you can try is use file explorer and go to Temp folder. There is file xtra.bin. That's where the data are stored. Try to remove it and soft reset. Try running your GPS without the file. It will take some time to fix (up to 5 minutes), but it should work.
If that does not help, QuickGPS will get the file back. I had problems like this on X1 .. usually something helped, either refreshing, or removing the file. On HD2 I needed it once, and refreshing the data using QuickGPS helped.
I'd suggest to try htc's own gpstool and see if you get anything at all on com4. search the forum for htc debug tools, the exe is in that package. And...disable quickgps and delete xtra.bin from \temp
Nice application .. I was looking for something like that ! Thanks !
thanks for the replies.
sofar i tried the qgps file removal with out success.
i have aso found something else out thats concerning, thats in igo 8 when i run a auto detect scan for gps device it come back saying their is no gps device.
it also seems to be the case when i ran gczll and the htc-gps-tool.
so i think that the gps driver? or device is the root of the issue?
hope this helps with the suggestions on how to resolve the issue?
Thanks for the helping again.
Aslo check settings/external gps.
First tab (programs) should be: COM4
Second tab (Hardware) should be: None, and 4800 (or anything I guess).
Third tab (Access) should be: Yes, manage GPS automatically
Dr.Sid said:
Nice application .. I was looking for something like that ! Thanks !
Click to expand...
Click to collapse
You're welcome ;-)
Have you installed any "tweakers" like BsB Tweaks, HD2Tweaks or similar? Have you messed around in the registry with drivers and such? I assume you didnt see any gpsdata at all on port com4 using the htcgpstool, what exactly happened when you opened com4?
Imho, if the above post by Sid doesn't do the trick, the easiest way out is probably a hardreset.
[edit]
what rom are you on, stock or custom, and have you never been able to use the gps or did this happen after a while, perhaps after you installed an app or something?
its stock rom, i havent ventured into cooked roms yet. (reading into it, getting a understanding of it all over last 2-3 days)
haven't messed around with the registy of bsb and dont have htctweaks (not sure on how to do that yet)
nothing happens when i run the htcgpstools, on com 4, same as it does nothing on any other application. it just continues to look (for a long time) or says no gps (like in igo 8).
im thinking that hard reset my be the best option as well.
could something have happened to the radio and broken down the communications of the gps device? (im not a expert, just a theory?)
and just on a cooked rom question.
i wanted a rom that has copilot removed and the full ram enabled, and just to include the performance update drivers (i have adk 1 runtime atm that improves the jitteriness) and other updates that hot fixes have done. but i want to keep stuff like animated weather etc.
from what i have seen it looks like dutty is the man for this type of rom?
could you recommend a cooked rom for a first timer/noobie?
Thanks.
I had a similer problem on my Touch Diamond.
Try switching off.... take the battery out for 1 hour, reinsert battery then turn on. I think that the GPS locked up.
Good luck
steveianson said:
I had a similer problem on my Touch Diamond.
Try switching off.... take the battery out for 1 hour, reinsert battery then turn on. I think that the GPS locked up.
Good luck
Click to expand...
Click to collapse
Hmm, you might be right. I still believe your best shot is a HR...
OK well did a hard reset and that has done the trick.
The GPS works and locks with in 10seconds from my window so working brilliant again.
Thanks for all the suggestions and the time taken to help out.
Hi all,
I am new to the android OS, got my galaxy s a week ago.
I still keep my HD2 and to be honest I may sell the galaxy due to the poor gps reception and keep the hd2 for the next year.
The other thing I do not like is the fact that I cannot program the buttons behaviour.
Any way my question is, is it possible to disable the build in gps and use an external Bluetooth GPS Receiver?
The gps on my hd2 is miles, miles better.
I dont think its possible in this version of android. There is no way to tell the app to use the external gps instead of the internal one.
All we can hope for is a fix from Samsung.
Sent from my GT-I9000 using XDA App
what is all the fuss about android then...
it doesnot support such a basic thing...
absolute joke
GPS won't start
Hello, I am experiencing an issue with my phone and I was wondering if anyone knows a solution.
Basically the GPS receiver won't turn on when an application requests it, so it won't get any location information (the gps notification icon doesn't appear at all). This is definitely a software issue, because if you go to the settings menu and keep fiddling with the location settings (gps on<->off, wireless on<->off) at some point it WILL turn on and work correctly (and the gps icon appears), but randomly afterwards it will go back to not starting up again and you have to go back to the settings menu.
Is there a workaround for this? I'm hoping that a firmware update will fix it, but in the meantime is there anything that can be done? (I'd prefer to wait for the official firmware before flashing it).
Not really a fix but Extended Controls can make a switch on your home screen that will flip the gps function on and off, that will save some time if you have to go into that menu a lot.
darnap said:
Hello, I am experiencing an issue with my phone and I was wondering if anyone knows a solution.
Basically the GPS receiver won't turn on when an application requests it, so it won't get any location information (the gps notification icon doesn't appear at all). This is definitely a software issue, because if you go to the settings menu and keep fiddling with the location settings (gps on<->off, wireless on<->off) at some point it WILL turn on and work correctly (and the gps icon appears), but randomly afterwards it will go back to not starting up again and you have to go back to the settings menu.
Is there a workaround for this? I'm hoping that a firmware update will fix it, but in the meantime is there anything that can be done? (I'd prefer to wait for the official firmware before flashing it).
Click to expand...
Click to collapse
I can confirm the same issue, rumour is that the upcoming firmware is going to improve the GPS a lot.
You can also use the 'Power Control' Widget that comes with the device.
Here you can turn On/Off a number of items, one being GPS.
I had this issue but it's just a case of going into settings and toggling the gps off and on again.
Sent from my GT-I9000 using XDA App
Good to know about the GPS on/off switch.
I was always rebooting my phone to get the GPS back to work.
There is an option in the secret GPS menu where you can set it to cold start, instead of hot start. Fixed it for me.
More here: http://forum.xda-developers.com/showthread.php?t=725748
not sure this will work but...
not sure this will work but found thin in Android market...
3 x w. appbrain dot com/app/googoo.android.btgps
Cleaner
Bluetooth External GPS
Hey guys. I wanted to know if we can 'natively' from within Android 2.1 / Samsung Galaxy S use an external bluetooth gps...
In the bluetooth menu I can conenct to the TomTom bluetooth gps module but it can't be paired...
however after some digging I found this app:
http://www.androlib.com/android.application.googoo-android-btgps-AtDE.aspx
It does what it says. I get satellites straight away.
Now one big big problem with this app is that it closes as soon as I try and open another app by pressing the home button or even holding down the home button to switch between apps...
when the app closes it ends the connection between the TomTom bluetooth gps module meaning by the time a satnav app has opened the message box pops up and says 'do you want to enable gps'
why does this app close when you try open another app? No other apps like Asphalt etc close like this...
is there a way to use the external gps?
many thanks
From my limited understanding, no it's not possible. I don't know why, but Android has been a bit slow on the uptake for Bluetooth.
It's taken to FroYo to actually get Bluetooth Hands Free dialling - we'll see how good Google is in interpreting what you say to it, so far, it hasn't been successful for me on the phone itself let alone Bluetooth.
With regards Bluetooth GPS, I understand that it isn't possible. There would at least have to be some kind of underlying interface to overrule the internal GPS and feed the Bluetooth GPS information into the OS in place.
I want it to be possible, then we wouldn't care so much about broken GPS's.
Cya
Simon
Another GPS fix
Hey guy give this a try and let me know if it works for you.
http://theandroidrevolution.blogspot.com/2010/07/android-tips-tricks-samsung-galaxy-s.html
working like a charm, faster fix and i can actually use the GPS while driving (EU)
Isn't this like turng skyhook on?
Ie ,..whilst locki it uses wifi to identify where u are?
this fix it seems very accurate in Maps, whereas all other "fixes" did not work for me.
i don't notice anything different in GPS tester (i still hardly get any satellites if any) but in Maps my position seems to be very accurate....i'm just inside in my flat, but all other fixes never helped me before even in this situation.
Hello
Thanks for your suggestion for a GPS fix
Immediate I can not see the big difference in standard configuration and the change which you refer to.
I still have a unsettled GPS fix when I use Google maps.
However, I think I can see a slight improvement in the Google navigation. Now I remain almost always in the correct lane.
I use (default) I9000XXJF3
I've read that a newer version should resolve the GPS "problem", but is it possible to change the parameters of GPS I9000XXJF3 match the parameters of the new versions. ?
And just one question more.
If I close the GPS from the phone to calculate my position after mobile mast or WIFI.
How do I get it to find my location by WIFI.?
Hope for a response.
Thanks
Herman
This fix gives an instant , i mean instant gps fix with a clear sky.
on gps test gets 8-9 satellite now , when previously i could max get 1-2, that too not connect.
thanks a ton for this.
outside this fix i also had operation mode as ms based and had skyhook on.
I found this suggested fix a few hours back as well and have been trying it out.
I didn't get much better results from it to start out with but having played the accuracy setting I've found putting this up to 150 seems to make a big difference. Once I made this change GPS Test seems to show that the Galaxy is a bit less picky about the signal strength it needs before making a lock.
I've not gone any further in testing accuracy numbers beyond 5, 20 (the default I believe) 50 and 150. It might be worth trying other values.