Hi guys, I'm looking for a real shut-down software that let me power off my trinity with a click instead of the power button pushed for three seconds.
Can someone help me ?
Thanks
not that i know off
because before wm5 it would result in clearing of all memory
and after it would result in no alarms or calls or other notifications working
while it was off
actarus999 said:
Hi guys, I'm looking for a real shut-down software that let me power off my trinity with a click instead of the power button pushed for three seconds.
Can someone help me ?
Thanks
Click to expand...
Click to collapse
i'm interested, too....don't care of alarm or other notifications, i just want to poweroff the device without pressing power button for 3 sec.
i too would like this but, as Rudegar has said - No it doesn't exist, it's been discussed before on this forum and i think there were some reasons it is not possible
P3600i can be power off by press & hold power button 5s only
Crap....it's really a bad news that PSShutXp woudn't work well on P3600i...damn
Related
Is there a way to complete shutdown the universal?
If I press the powerbutton it's not really powered off... for example it however pops up the notifications/alarm etc.
Let me know if there's a way.
Thank you,
Roberto
take the battery out, its the only way
The x51v comes with an app to switch off entirely, through the magic of persistent memory.
A review of the kjam says:
If you hold down the power button for about 4 seconds, the K-JAM will bring up a Yes/No dialog asking if you want to continue with a full power off. If you choose Yes, it will shut the device off completely, meaning it won't use the battery at all.
Click to expand...
Click to collapse
http://pocketnow.com/index.php?a=portal_detail&t=reviews&id=710&p=1
Anyone tried this? I don't have my uni with me.
V
vijay555 said:
Anyone tried this? I don't have my uni with me.
V
Click to expand...
Click to collapse
Holding down the power button on the Jasjar simply turns the backlight off. You need to hold it down again to turn it back on. I did this accidentely the first time and I thought the device was broken for a minute, because it didn't apprear to turn on when I pressed the power button.
Brett
vijay555 said:
The x51v comes with an app to switch off entirely, through the magic of persistent memory.
A review of the kjam says:
If you hold down the power button for about 4 seconds, the K-JAM will bring up a Yes/No dialog asking if you want to continue with a full power off. If you choose Yes, it will shut the device off completely, meaning it won't use the battery at all.
Click to expand...
Click to collapse
http://pocketnow.com/index.php?a=portal_detail&t=reviews&id=710&p=1
Anyone tried this? I don't have my uni with me.
Click to expand...
Click to collapse
Just tried holding down the power button for 20 seconds and it only turned off the backlight. Nothing else.
I own an O2 Mini & Eten M500.
Is there any possibility of remapping the power on/off button to another hardware key since my actual button is acting funny with me.(it works most of the time, but certain times even if I sit on it it wont power on the device. Power off is not a problem since I programmed it to sleep after xx secs.)
Any developer gurus out there who can develop a prog. for me :roll:
Thanks in advance for the help.
I dropped my HTC Hermes device and now the power button is stuck in.
Is there anyway to remap the power on/off function to another hardware button? Specifically the comms button.
well, i would like to delete my message, but dont know how?
i can edit it but i cant delete it, right?
You can use "AE Button Plus" to map all the other keys to other various functions, "power off the device" is among them...
you can even specify actions for single press, double press, triple press or long press for each button.. good luck
ae button or pqzII is okay
[email protected] said:
I own an O2 Mini & Eten M500.
Is there any possibility of remapping the power on/off button to another hardware key since my actual button is acting funny with me.(it works most of the time, but certain times even if I sit on it it wont power on the device. Power off is not a problem since I programmed it to sleep after xx secs.)
Any developer gurus out there who can develop a prog. for me :roll:
Thanks in advance for the help.
Click to expand...
Click to collapse
Thats quite strange and I've never heard that one before. I'm guessing there could be some oxidation on the contacts of the power button.
As a test to be 100% sure its the button which is the problem, have you tried calling the device to wake it up when the power button refuses to work? Reason being, is that I suspect its actually the device freezing and not waking up rather than just the power button malfunctioning. If the power button refuses to work and you can successfully wake up the device by other means (eg, a phone call) then you can explore other alternatives
how do i map leftsoftkey as the redkey(Red Phone Button) and the redkey as leftsoftkey?
current hardware keymap:
leftsoftkey controller rightsoftkey
greenkey controller redkey
what i want:
redkey controller rightsoftkey
greenkey controller leftsoftkey
reason for tiz is i cant seem to get morphgear to use the redkey or the greenkey even after mapping in the game. by mapping leftsoftkey to the redkey, i can then play the game with "A" "B" buttons using my right hand. so "A" will be mapped to rightsoftkey and "B" mapped to "leftsoftkey"(physically redkey).
i hv tried ae button plus.. tried unbinding redkey still no use. tried binding single press to virtual key too but to no avail.
It could help
[email protected] said:
I own an O2 Mini & Eten M500.
Is there any possibility of remapping the power on/off button to another hardware key since my actual button is acting funny with me.(it works most of the time, but certain times even if I sit on it it wont power on the device. Power off is not a problem since I programmed it to sleep after xx secs.)
Any developer gurus out there who can develop a prog. for me :roll:
Thanks in advance for the help.
Click to expand...
Click to collapse
This one is from the Hermes forum, at least gives you a couple of ideas on how to...
Cheers!
Rigging screen off (like PWMP)
I would like help on this too. Is there any way to rig the device so the power button only ever turns on/off the screen (like windows media player does) or at least is there a program or cab someone can design to do this????
Thanks in advance.
I've figured out how to do the above, if anyone wants to know pm me.
Hi Guyz, anyone help me on this one...I need to be able to power off the PDA using software not the hardware on off button - anyone know of a routine for this
BGA said:
Hi Guyz, anyone help me on this one...I need to be able to power off the PDA using software not the hardware on off button - anyone know of a routine for this
Click to expand...
Click to collapse
search psShutXP
Install Mortscript then use this script. I use it on my Touch. I hate the power buttons on these phones. Except for the Wizard. That was a nicely placed/tactile power button.
Thanks for the responses guys, Can I clarify that I need to power off the unit NOT put it to sleep (hibernate), ie I want to replicate what happens when you press the power button for 4-5 seconds completely power down the unit
hello.
Does anybody know if there is an application that can power off (not suspend but total power off) ?
Thank you
guitarhero said:
hello.
Does anybody know if there is an application that can power off (not suspend but total power off) ?
Thank you
Click to expand...
Click to collapse
Since upgrading to WM6, I accidentally found that holding the power button down for about 3 seconds will power off the device fully. ie, when you press the power button again, it boots up from the white HTC screen
yes, I know that way for powering off, but I'd like to do it by soft instead of using the power botton.
Does anybody know if this is possible ?
creat shortcut to poweroffwarning
Power off app
You may want to give this little app a try, I haven't used it so can't vouch for it...
http://www.freewareppc.com/utilities/pocketpowermanager.shtml
Good luck
* I tried the app, it isn't anything fantastic... but this little beauty does what you're looking for I think - thanks to our friend iiiox (I've tried it and it rocks!)
Hi Guys!
if got a big problem, the Power Button on my Herald does not do anythink. The switch is broken, so could i set up an other button (f.e. the Commmanager Button) to be the Power Button? Only as fix for some month, than i want to grab me a new HTC. Thank you very much, i hope anyone have somethink for me.
Thanks!
No, you cannot switch your power buttons functionality to a different hard-key. The power button is hard wired to the main bored to provide that function, its not software based like the other ones are.
hm thats mad, okay lucky for me i can get an other one on frieday