Related
I'm on Tmob USA's GPRS which works fine, except certain pages (like the html full version of google) or blogger.com just will not load over GPRS. I've tried some registry tweaks to make my browser look like another browser and some other tweaks that were recomended and I still have no luck.
I believe another JasJar user was able to set the preferences at Google to always load pages as HTML, but over GPRS I can't save my preferences on that page to do so. Over wifi I'm able to connect to any page just fine (and I've set my google preferences to HTML from the device on wifi), so I believe somewhere the device is changing the settings depending upon my connection method.
This is one of my last JasJar bugs that's driving me nuts. Please help if you can!
Really, no one else is having this problem? crap....
After my last hard reset google keeps diverting to www.google.co.uk/pda. I think that's because I haven't used Tweaks2k2 to change a few bits, as I normally do, but you can still view 'proper' google, by going into preferences (on the website) and changing the default to 'HTML'
sub69 said:
After my last hard reset google keeps diverting to www.google.co.uk/pda. I think that's because I haven't used Tweaks2k2 to change a few bits, as I normally do, but you can still view 'proper' google, by going into preferences (on the website) and changing the default to 'HTML'
Click to expand...
Click to collapse
See, I tried that with no luck. When I navigate to the preferences page over GPRS it fails to save my preferences, literally every time it times out. When I use Wifi I can navigate to the preferences page and save the preference for full HTML, but it still doesn't load when using GPRS. It's pretty clear that it's using a different set of connection settings when the connection is made via GPRS. What settings do you use with Tweaks2k2? Maybe that will work for me...
As I see it, there are three possible reasons:
1) The connection is not a full internet GPRS connection and maybe instead going to a "walled garden", or using WAP
Go to settings, connections, connections, Manage existing connections and duplicate the settings from your Universal onto another device capable of taking your SIM card. Try that sim card in another device with the same connection settings. I expect you'll get the same results. If so, post the settings here
2) Tweaks has done something undesired. Can you list a few websites that are failing? Personally, I'm reluctant to install ANY software until I'm 100% convinced I need it. This applies also to my desktop and trippley so to my server
3) Blame the user :lol:
I reckon it's 1) :idea:
I just set it to recognise pIE as IE6.0
I'm not convinced that that's going to fix the problem you have though, because I'm sure that I've had that problem on other PPC phones which I never used Tweaks2k2 on, and there was some other way to fix it.
I'll have a play around and see what I can come up with...
xiasma said:
As I see it, there are three possible reasons:
1) The connection is not a full internet GPRS connection and maybe instead going to a "walled garden", or using WAP
Go to settings, connections, connections, Manage existing connections and duplicate the settings from your Universal onto another device capable of taking your SIM card. Try that sim card in another device with the same connection settings. I expect you'll get the same results. If so, post the settings here
2) Tweaks has done something undesired. Can you list a few websites that are failing? Personally, I'm reluctant to install ANY software until I'm 100% convinced I need it. This applies also to my desktop and trippley so to my server
3) Blame the user :lol:
I reckon it's 1) :idea:
Click to expand...
Click to collapse
Some interesting ideas there. Some of the sites that are failing include:
www.google.com - I can't access the full version and the PDA version hangs constantly during loading and loads results very slow, no images shown when image search is done.
www.blogger.com - It tries to load www.blogger.com/start which again hangs terribly and loads a version of the page with no images.
Various internet shortcuts I imported over from my bookmarks I used on my Dell Axim X30 (PPC2003SE). I'll have to pull a list later if I'm still having this problem.
I don't have another PPC Phone device so I can't try the settings swap but it does sound very likely. I am currently using the cab file from imate for tmobile USA settings (which does create a connection called "tzones" which kinda worries me), it uses the internet2.voicestream.com access poin. I had also manually configured the settings previously using these settings and still had the same problem (pulled from a hofo post by Mashie):
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = wap.voicestream.com or internet2.voicestream.com (whichever you like)
Next
Next
Finish
leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
But maybe I need to try some different settings... I'll try playing with the settings I have, creating new settings, and hounding some other Tmob USA GPRS user's settings (hopefully someone using another jasjar).
Re: #2, I haven't actually used Tweaks, I used Resco registry editor to try and make the browser appear to be a full PC browser. I tried a ton of registry settings suggested by some more Hofo super-users, but nothing worked. I eventually got really creative and desperate with some registry edits and finally hard reset the device, tried the suggested reg edits again without success, then hard reset again.
Re: #3 - lol. I seem to be the only one with this problem, so I'm not rulling it out... I was a bit worried someone was going to suggest that the PEBKAC (problem exists between keyboard and chair).
www.hotmail.com and www.handango.com are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards
www.hotmail.com and www.handango.com are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards
"www.hotmail.com" and "www.handango.com" are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards
Has anyone had this issue and resolved it via ROM upgrade? I'd be ready to upgrade the ROM right away if I knew it fixed this issue. If not, I'd rather not waste a few hours setting up, reinstalling, and configuring everything.
Does Mozilla Minimo work on the JasJar?
If it does - I believe that might offer a more feature full alternative to the bundled pocket PC InternetExplorer Galt.
Hope this helps
Finally remembered the address that I used to use for Google when I had this problem on my Jam...
http://www.google.com/webhp
That wont redirect you to the /pda page. There are probably similar pages for other websites, but this is the one I used most!
This registry hack will make Pocket Internet Explorer identify itself as IE 5.5 on Windows 2000. However it will prevent web sites that provide Pocket PC specific content to be able to know you're actually using a Pocket PC
Change Pocket IE to IE Version 5.5 (For Secured Sites)
1) Go to the HKLM\SOFTWARE\Microsoft\Windows\?CurrentVersion\Internet Settings\User Agent\ key. 2) Set the default value to "Mozilla/4.0" (Default is "Mozilla/2.0"). 3) Set the "Version" value to "MSIE 5.5" (Default is "MSIE 3.02"). 4) Set the "Platform" value to "Windows NT 5.0" (Default is "Windows CE").
This will only work on some secure sites that check version number rather than perform a check for support of secured transactions.
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Carnivor said:
Change Pocket IE to IE Version 5.5 (For Secured Sites)
1) Go to the HKLM\SOFTWARE\Microsoft\Windows\?CurrentVersion\Internet Settings\User Agent\ key. 2) Set the default value to "Mozilla/4.0" (Default is "Mozilla/2.0"). 3) Set the "Version" value to "MSIE 5.5" (Default is "MSIE 3.02"). 4) Set the "Platform" value to "Windows NT 5.0" (Default is "Windows CE").
This will only work on some secure sites that check version number rather than perform a check for support of secured transactions.
Click to expand...
Click to collapse
Tried that, didn't work for me.
sub69 said:
Finally remembered the address that I used to use for Google when I had this problem on my Jam...
http://www.google.com/webhp
That wont redirect you to the /pda page. There are probably similar pages for other websites, but this is the one I used most!
Click to expand...
Click to collapse
Tried that, although it loaded the main page (I think I had it cached from wifi browsing) it didn't let me search from there.
I finally upgraded my ROM to the latest 1.13.53 version and still couldn't resolve this with alternate URLs or registry edits. Any ideas, anyone? I'm using the T-mob USA cab settings from imate...
For some reason I've done this a thousand times but its not working this time. I'm pretty sure I've set this up right but its not working. 1st question: Is it possible to send MMS messages through 'internet2.voicestream.com'? It works through 'wap.voicestream.com', but then GPRS/EDGE wont work through that, it will only work through 'internet2.voicestream.com'. In addition to that, the auto switch isn't working for me. The MMS is trying to use 'internet2.voicestream.com' and the GPRS/EDGE is trying to use 'wap.voicestream.com'. 2nd question: Is there a way to set this up MANUALLY, without a provisioning cab? I hate those things, they add in other customizations that I don't like or want.
hiimcliff said:
For some reason I've done this a thousand times but its not working this time. I'm pretty sure I've set this up right but its not working. 1st question: Is it possible to send MMS messages through 'internet2.voicestream.com'? It works through 'wap.voicestream.com', but then GPRS/EDGE wont work through that, it will only work through 'internet2.voicestream.com'. In addition to that, the auto switch isn't working for me. The MMS is trying to use 'internet2.voicestream.com' and the GPRS/EDGE is trying to use 'wap.voicestream.com'. 2nd question: Is there a way to set this up MANUALLY, without a provisioning cab? I hate those things, they add in other customizations that I don't like or want.
Click to expand...
Click to collapse
I've been using the T-mo cab since day 5 (days 1-4 I was racking my brain trying to get MMS to work) and it configures the connections as follows:
-Use internet2... under "My ISP" (or "T-Mobile US" in your case)
-Use wap... under "My Work Network" and change the "Connect via:" setting under MMS settings appropriately. Also, proxy settings are enabled for this connection ("This network connects...." and "This network uses..." both checked, proxy server blank, and under advanced settings: WAP server is: 216.155.165.50:9201)
-Network management (under the advanced tab of connections) => "My ISP" in the top, and "My Work Network" in the bottom.
The autopick within a connection never seemed to work for me, but the above works fine. In order to send an MMS, you must first disconnect from your GPRS/EDGE connection (alternatively, MMS will be the first to connect when recovering from a dropped data connection).
Hope that helps, if not just run the provisioning cab...hell-of-a-lot easier and I don't see what "other" things are added, all it does is set up the network connections and all the settings, nothing more, nothing less. Filename of the one I've been using for quite some time is T-Mobile_USA_Internet_UNI_SA_V2.0.CAB
glhs509 said:
I've been using the T-mo cab since day 5 (days 1-4 I was racking my brain trying to get MMS to work) and it configures the connections as follows:
-Use internet2... under "My ISP" (or "T-Mobile US" in your case)
-Use wap... under "My Work Network" and change the "Connect via:" setting under MMS settings appropriately. Also, proxy settings are enabled for this connection ("This network connects...." and "This network uses..." both checked, proxy server blank, and under advanced settings: WAP server is: 216.155.165.50:9201)
-Network management (under the advanced tab of connections) => "My ISP" in the top, and "My Work Network" in the bottom.
The autopick within a connection never seemed to work for me, but the above works fine. In order to send an MMS, you must first disconnect from your GPRS/EDGE connection (alternatively, MMS will be the first to connect when recovering from a dropped data connection).
Hope that helps, if not just run the provisioning cab...hell-of-a-lot easier and I don't see what "other" things are added, all it does is set up the network connections and all the settings, nothing more, nothing less. Filename of the one I've been using for quite some time is T-Mobile_USA_Internet_UNI_SA_V2.0.CAB
Click to expand...
Click to collapse
on the contrary. when you open the cab you find all sorts of new favorites, changed home page, setup.dlls, and other customizing crap.
i've tried your way in the past. it does work. but i also know there is a way to get the auto pick to work. it has worked in the past. i just cant figure it out again.
hiimcliff said:
on the contrary. when you open the cab you find all sorts of new favorites, changed home page, setup.dlls, and other customizing crap.
i've tried your way in the past. it does work. but i also know there is a way to get the auto pick to work. it has worked in the past. i just cant figure it out again.
Click to expand...
Click to collapse
Dunno which CAB you've been looking at, but the one I use has 4 files: an XML file for network settings, registry settings file (for MMS), and Check/Recheck executables for installation. No changes to favs, home page, etc...
The is the same one I've been using since grabbing from I-Mate's website back in Oct. '05.
glhs509 said:
Dunno which CAB you've been looking at, but the one I use has 4 files: an XML file for network settings, registry settings file (for MMS), and Check/Recheck executables for installation. No changes to favs, home page, etc...
The is the same one I've been using since grabbing from I-Mate's website back in Oct. '05.
Click to expand...
Click to collapse
well the ones from tmobile's extended rom do. and quite simply put, i dont want to use a provisioning cab.
now the question at hand is... has anyone gotten the auto pick to work with manual configuration and not with provisioning cabs
Odd wap.voicestream.com works fine for me for my edge connection. Makes it real easy to send an MMS no dropping connections or anything. I've used the above mention method using two different settings before works fine but not the autopick method.
Regarding Cingular (ATT) 8500, BES and proportioned SIM for Blackberry Service
In the past I was able to get Blackberry connect to work on the Elf 2.1 ROM. I removed it while using ActiveSyc for mail but due to corporate mandate we must use BB's rather than WM (BB Connect is acceptable). When I went to reinstall...no go. I've tried the Elf 2.1 ROM and Black X beta 2 and run into the same problem over and over again. Currently I have installed Black X beta 2. A search of the forums and google have lead me nowhere thus a post.
I'm installing Blackberry Connect (BBC) 4.0.0.90 via a cab file on my device. I then connect to the Desktop BBC 4.0.0.17 and configure the wirless handset successfully. When I go back to the device the Services tab is populated with six entries. theEmail Settins shows my email and allows me to "Go to Settings". The Identity tab shows my PIN, IMEI but no IP Address( No Connection). Under the Status tab's Service I can get it to show "Network Available" but after a few minutes it will go back to "Suspended by User".
I've used BandSwitch & CommMngPro to set the band to GSM (no 3G) and this has not worked either.
Additional, I've ensured that all apps are closed (included activesync) with no result. I've even go as far as to hard reset and only install BBC to ensure nothing is stepping on BBC.
I can not remember if "Blackberry" should show up under WM's Network Management. If it does, I'm not seeing it despite repeated installs. Further more, I do see the device trying to connect to "Blackberry" but this only show up in the alert bubble. I can find it listed (grayed out) in the Options tab of the BBC Settings.
So far for all my trouble the best I can get is a system tray icon of "B!"
Any ideas? Do I need to manual install the APN settings?
Thanks for taking the time to read.
CMD
Hi all, got my new HD2 yesterday, got phonealarm, TOMTOM7 and a few other apps loaded plus all the HTC patches and latest ROM. Its an HTC branded phone on T Mobile PAYG.
When I go to check my e-mail, it pops up asking me to check my data settings with a dismiss button. When I try and use Twitter it says the service is temporary unavailable. When I use the Weather to update I get a similar message.
Browsing and FB are fine, I have requested the T mobile settings but they arrive as a voicemail message which is odd. Any ideas?
Thanks all.
tmo uk use a proxy, which is the first thing to turn off,
settings menu all settings connections* connections manage existing connections proxy tab untick uses a proxy.
try that, if that doesnt work, at the * point above, there should be a 'connection setup' app. Give that a try, but dont forget running it will probably re apply the proxy.
Genius maty, works a treat now. Also my twitter is now working. Could you explain why unticking it works? Cheers.
i'd assume its to do with the proxy traffic shaping in some way. i believe tmo compress images too,
Its the fault it did'nt even try, just popped up with the connections error and the dismiss button.
Just tried it again, fine, goes onto 3G, jumps to H, then checks mail no prob.
Only other thing to sort its the weather, it picks up my local town which is coded in. But the "my location" won't work. I get a connection error Retry YES or NO. Get this regardless of whether its wireless or active sync.
I want to automatically select the default network to which the device connects
(the first combo in Settings->WirelessControls->menu->Connections->Advanced->SelectNetworks -
See attached image)
My problem is as follows -
When I set up the connection to the operator -
it sets the default network to be <<3G Portal>>
I want to automatically change it to <<Internet 3G>>
(Or in the worst case -
Automatically delete the <<3G Portal>> -
making the <<Internet 3G>> the only available option -
which will force it to be default)
Does anyone know how to do this ?
(Even if some Cpp/C# code is needed - does anyone know the API ?)
Thanks
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
As I understand your Q, you wanna auto set the default network without having to manually change it everytime you hard reset / change roms?
Here's what I do for such things.
Get ceregistry editor, connect to your phone, export the registry to file, then, on the phone, change the default access point to the one you would rather it was, (possibly reboot phone here to be sure the registry has changed the default apn,) back into ceregistry editor, compare current registry to the snapshot, figure out which key changed, and to what value, then provision that reg key (via a cab, or provxml,) whenever you hard reset, after the network has been set up. (I have a cab with dozens of tweaks in it,you can just keep adding to it)
johnerz said:
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
Click to expand...
Click to collapse
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Som30ne said:
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Click to expand...
Click to collapse
Try using Data Controller by Red Frogfish. With this app, you can turn on and off all of your different connections indvidually.
Since, I have T-Mobile, I have the following connections:
T-Mobile Data
T-Mobile MMS
T-Mobile Internet
And, Data Controller lets turn each on or off as needed/wanted.
Rob
samsamuel said:
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Click to expand...
Click to collapse
Ok, thanks.
I will try this method.