My HTC was flashed with TNT. It has 2.21.0001 and 2.21.Olip. I can boot it to boot loader. I can reset it, with switch or pulling the battery. Every time it boots showing the versions, then comes to a WM6 boot screen. This is normal. However it never comes out of this screen. The LEDs flash as if it were working, but the phone is unresponsive.
Is there any way to fix this?
Do I need to reset it in some way? If so, how?
i had a same problem with TNE. after it worked fine for a year.
then i changed the rom to a new 1 and fixed all my problems . just upgraded it in bootloader mode.
Same problem. I installed BlackDiamond2.0. At the begginning everything was ok, then Send button wouldn't work till I press the Start button on the querty keyboard.
Just playing, I tried to overlook with an application that came on the package and then it didn't work any longer. It stays at the BlackDiamond picture.
And I cannot make a hard reset since Send button don't work and cannot connect with Active Sync to flash the rom.
Any idieas?
also could be a bad battery. happened with my brothers phone. acted the same way.
our phones are old now. get a replacement 10 bucks.
Related
Hi there , i recently tried to flash the rom of my vogu100,it didn't work well so i had to do a hard reset, everything is fine, it goes trough the reseting process fine,but when it restart , it stays at the bell blue screen.I tried to plug the usb to the pc to reflash the rom but nothing shows up !!!!!! What should i do!!!!!!!!
okay after a lot of researche i foud how to get in bootloader mode after restarting my unit,i then have pressed the power button camera button and tapped the reset button as if i was doin' a hard reset,i then got in bootloader mode and was able to install the new rom from bell . everythings work fine now.God i tought it was dead.
ya, my phone started hanging at the bell screen yesterday, had to reflash to get it back up and running. im not sure what caused this as i havent flashed in a few weeks.
Need help/advice.
I flashed from stock rotos rom jme. I had problem with flashing. Things like windows not recognising tab in download mode. Several times failed flashing in midle of flash process. At the end I flashed succesfully. And things are working normaly. But when I switch off and then on. I get at&t logo and then black screen, i get sound from samsung logo but still black screen. Buttons on/off the backlight few times and still black screen. Then I press sleep then wake and i get straight the locking screen and all fine till next boot.
It looks like the boot part does not initialize the screen propely as its has a white line across when its black.
And in recovery i cant see what I am selecting.
Any ideas?
update:
sys73r pointed me to http://forum.xda-developers.com/showthread.php?t=899196. I will test that after I solve my unstable USB connection. As flasshing boot with usb problem smells like brick factory.
Sorry for bringing this again to top.
The fix was already posted.
Hi,
New phone and new to Windows phone 7. Classic story - the phone has stuck in boot screen, it says only "Samsung Omnia 7" and that's all. I have tried all tips I could find from internet - took the battery out and let it sit, tried to hard reset it -nothing. Actually hard reset button combination seemed not to work - when I turn it on, holding camera and volume down buttons, nothing happens, it shows boot screen and that's all. It do switch to the download mode when I turn it on holding camera and volume up buttons. I tried to reflash it (got the rom files that it came originally), and after restart the situation is the same - boot screen stuck and nothing happens.
I used WP7_downloader version 7.41, Samsung USB drivers v5.02. The weird thing was that older versions of WP7_Downloader did not work - told that flash lock was on. 7.41 seemed to work, it erased and downloaded all areas fine. I don't know if this is normal, but the flashing process itself took about 120 seconds only. I tried alternative ROM (classic I8700XXJK1), the flashing time was slightly different, but nothing changed, after flashing the device restarts and stuck to the boot screen. As I have read the flashing process should took about 10 minutes or so? I waited for about 20 minutes and nothing changed.
Can I switch the device to some debug mode or do something else that could lead me to the reason the device is not booting?
Omnia 7 stuck at boot screen after
I upgraded to Mango last week and i now too am stuck at the "Samsung Omnia 7" boot screen.
The phone seemed to do two updates, the first suceeded no problem. I started the update before going to bed. In the morning it had completed the first and was awaiting my pin code to start the device. All good.
It then prompted about the Mango update. I clicked it and left it for an hour or so. Came back and zune stated it was on the step, "restarting the phone".
The phone was showing "Samsung Omnia 7", i left it for another hour and then came back, no progress.
Nothing i've found on the net up until today has worked for me.
I can enter the format and download modes still.
This is what i've found and tried so far.
1:
answers.microsoft.com/en-us/winphone/forum/wp7-wpdevices/samsung-omnia-7-bricked-stuck-in-boot-loop/76831b31-2c5b-4d3b-8f65-06111e1f3798
(Did a device wipe to factory defaults, and its still stuck at boot screen
2:
support.microsoft.com/kb/2547687
(yes this is an older issue but it looked like it was working until it said something about "flash lock").
Next step is a complete ROM reinstall. But i'd really like to find out precisely which ROM i should try and if Mango is the actual culprit. I'd like to reinstall Mango if possible.
My Omnia 7 was bought secondhand.
I am with Telstra NextG carrier.
After mango update mine is behaving strange too. It shuts down itself randomly and it is stucking at omnia 7 screen. After a few try I am able to open it. But I noticed something, it's shutting down much more while it's connecting to web or PC. Can this be related? Because I couldn't find another reason about that.
Im so lost with this, im all stock but one day my phone just freezes then bootloop, I would be able to get it work by just leaving it and let it drain itself since it will be boot looping and lock me out completely, like the power button + low volume button would not work even after 10 minutes of holding it, would not boot to download or recovery mode, just the soft touch keys light on and the blue LED.
I reflashed my ROM from sammobile yesterday but did it half-effort, just dirty flashed it but it seemed to reformatted my phone anyway, after reflashing it, everything seemed to work properly for 20 hours and then now im back to this piece of ********* boot looping...
S7 Edge
running the Australia unbranded XSA-G935FXXS1DQG4 from the branded G935FXXS1DQG5,
would flashing de-branded affect this? or this is hardware?, one thing I did that I think was a mistake is that I chose to restore from old device, can apps cause this?
the very first time this happened, I plugged it in to charge then crash and bootloop.
UPDATE:
Things I've tried,
-Booting with NO sim card and SD Card
-Wiping cache and partition then reflashing stock XSA and OPS firmwares
im convinced that this is a hardware issue and will go to Samsung.
mine does this too. crashes then gets into a bootloop at the Samsung logo. I usually try holding the lock and volume down button. I factory reset the phone once but it still keeps happening, this started happening around 4 weeks ago
Guys your Main/Mother-boards are broken.. u need to replace it, or send back to Samsung..
Damn! Crash reboot samsung logo
Damn you say broken mother board...
did this. Press vol down, power button and home key...hmmm... i think...pressed so many combos hard to tell themapart
ok
i've been usign whatsapp and suddenly my phone went into bootloop,
tried to enter fastboot, recovery
but he keeps on boot-looping after 2-3 sec of showing the fastboot-recovery icon.
i tried disconnecting the phone-battery-motherboard-etc, but he keeps going boot-loop, showing the first load screen, black screen, and so on and forth
any suggestions? never occured to me before , only after unsuccessful flashing, but like this? this is really weird.
i have a custom rom yes, but with it for a few months already , 0 problems.
p.s my phone fell on the floor few days ago, but had no problem since whatsoever
any clues on how to solve this?
i can't even get to flash via fastboot/recovery because it restarts when im there..
what could be the problem? the only thing pops into my head is that the restart key is pressed all the time, but is it possible?
I had the same problem, crazy thing. I couldn't even enter orange fox, got to the loading screen and got another reboot. I pressed power button fast many times and then worked. The power button seemed to be ok. The only thing that i had recently changed was the EAS version of the predator kernel. It may not make sense but i went back to HMP and now it's fine.
well! it worked lol
what is HMP? a kernel?
A type of kernel, the common one. Now i know that was not the reason!
Hello
I have the same problem as you and if someone has a solution, I will be very grateful !
I can use my phone but if I push to the power Button, it bootloop.