Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
Hi all, I have MDA Pro with BT headset Motorola H500. When I have call, the headset just play its built-in ringtone. I have set different tones for some 'important' contact and want to listen to them on BT headset, is there any software or registry tweak can do it? I used MS Voice Command and it direct the ringtone to the BT headset, but using that program was a huge memory consuming and not useful for a non-native speaker like me. Any help would be appreciated.
PS: sorry for my bad English.
Your headset needs to support the handsfree profile not just the headset profile for this to work.
When I tap & hold on the headset icon, there are 'set as hands free' entry, click on it has no effect, anything i can do to activate handsfree? TIA.
Not unless your headset supports it. If it did, you would hear the ringtones.
I am looking at some specs of the headset, it do support both 'headset' and 'hands free' profiles. But I cannot hear the ringtone of MDA Pro just the default ringtone of the headset. Any ideas? Thx.
Hi folks,
can anybody confirm this behavior ?
When I plug in my headset, my ameo still plays the ringtone from ist speakers on an incoming call (yes, the ringtone is also on the headset).
Is there an option i missed ?
Thanks for your help, best regards.
I find this extremly handy, when im driving I dont have the earphone in my ear all the time. It also does it with a bluetooth headset. im sorry I don't have the answer.
first off, i love al bundy
ok now that thats over.... what headset do you have, is it bluetooth or wired headset
I’m running the official HTC (Dutch) Windows Mobile 6 version on the HTC X7500.
I’m using a Motorola HT820 Stereo Bluetooth headset to listen to music by A2DP.
I’m using a Jabra BT5010 Bluetooth headset for voice calls.
Voicecalls with the BT5010 are no problem at all. Listening to music with the Motorola headset is no problem too, when the Jabra IS NOT connected (turned off) at the same time.
The Motorola stereo headset and the Jabra BT5010 can both be connected at the same time, they are even working (I can call with the Jabra and listen to music with the Motorola) but now and then the stereo music is lagging.
When it starts lagging in stereo audio playback it doesn’t seem to stop anymore. Sometimes the music continues the normal way, and sometimes the lags will come up again a few seconds later.
There are no more lags when I then shut down the Jabra headset.
Is there a way to solve this? It looks like some sort of “Bluetooth bandwith” issue since it only happens when both headsets are connected.
Please note that even though the Motorola HT820 can make voice calls too, I only checked the “Wireless Stereo” service to be used, and “Wireless headset” is only selected for the Jabra.
Adding/editing registry entries like BitPool, UseJointStereo, MaxBitPool, SampleRate and all WILL NOT resolve this problem, I’ve already tried that.
Thanks guys!!
Hey guys,
after a few days testing the BT headset connection in all different versions, i cannot get the LG to play the SMS sound from the device when my headset is connected. It plays the SMS sound only in the headset.
Phone calls are correct... the device rings and the headset makes it's typical sound.
I have a Jabra headset and it worked well with my HD2.
Can someone confirm this?
Any ideas how to solve this?