Database Users

How to load a SPL in RAM and use it?

I have a Herald with the bootloader with some problems.
I can connect with mtty.exe but don't know what commands must be used to load a SPL in RAM and use it. if i do that i think i can install a new OS.
Hope you have a suggestion.

sspl?
message too short!

thanks for your post!
i saw that SSPL exists for hermes and trinity.i asked Des to provide some further instructions.
If you know if i can use SSPL with Herald, and if that can be done from the bootloader that will be perfect...since this is the only way i can unbrick my phone.
and no version for radio is showing..

don't know much about herald, but something is for sure - if your phone is already bricked and hardspl is not already installed - chances are its highly unlikely that you can still push a spl into ram and have it executed.
you need other means of rescue. go to the herald forum and that's your best shot. btw, can't you just flash the original rom to recover?

today i have downloaded all versions of the roms for herald. i'll try them all....

P4350 problem flashing stock SPL after Hard SPL

Hi guys,
at first i want to thank you for any solution or info you provide in this forum, it helped me in a lot of cases.
I'm looking for a solution for a problem i'm facing, I have two P4350 which the second is from a friend of mine.
This P4350(HERA100 IPL/SPL 4.x the second device) was bought through ebay and had the german windows mobile 6.0 on it. I couldnt flash the WWE edition of windows mobile 6 because of an error saying "Invalid Vendor ID" so i assume it was a CID Locked.
So I did the first thing i found on this forum and after a lot of reading on how to do it, i installed the Hard SPL from Aserg. The problem is when I try to install the extended rom which comes from the distributor here in Greece of HTC Phones.
Apparently they have done something and somehow it recognizes that i have installed wrong SPL and always reboots(it displays an error msg inside the OS enviroment and after 5 sec it reboots) when the WWE OS start after the installation of the programs inside off Extended ROM.
So after some more reading i found that i could have used the USPL method for bypassing the CID Lock. Correct?
Now my problem is that I want to remove the Hard SPL to install the officially shipped edition of SPL + WWE ROM using USPL.
Whichever solution I use to remove the Hard SPL it just wont go away!
I even installed the German edition again with the hope that it will install the stock SPL again. It says that is being flashed but the SPL doesnt even change! While the ROM is being flashed correctly and windows boot without any problem
I have tried Flash Center, Stock Rom(German & WWE) and lots of different removals for Hard SPL but nothing worked!
Is there any workaround/solution for this problem? I have no problem to use any tools or console based ones but I need some information or a tutorial so as to not brick the device.
Thanx in regard for any help and sorry for the long post but I wanted to describe all the steps that I followed to get here.
P.S. If this post is in the wrong thread please tell me so.

Signal after SIM unlocker and Hard-SPL

I like many on here am suffering the bad reception after the sim unlock.
If I run Oli's software right through to Hard-SPL, patch radio and unlock can I then add the Murata radio ROM and the Hard-SPL-V2 SPL to a Custom ROM im making.
So my custom ROM will consist of a OS (custom WM6) a GSM (Murata) and a SPL (Hard-SPL-V2) but leave the SPLASH blank will my Polaris then be still SIM unlocked and Hard-SPL'd everytime I hard reset or load a new OS?
Also can I use any radio ROM after the Unlocker to be SIM unlocked or does it have to be the patched one or Murata.
Thanks

Don't need to flash the spl again only one time and that's definitif for the rest of your polaris life.
Yes you can install a rom and after flash a different radio rom without probleme.
You can change the splashscreen if the rom flash have change it by reflashing only the splashscreen with udK tools.
You can use any radio you want.

So the SIM unlock and Hard-SPL will remain no matter how many times I update the radio or os?
Great. Thanks for your reply

Flashing to 1.42SPL when I have 1.49 - Bootload is locked :(

I am from Australia and I am having a problem with my phone.
I have the 1.49.841.1 ROM installed and I cant flash to a HSPL/HSPL2 because I cant put any of the required ROMS on my phone:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
I cant unlock my phone with MaUpgradeUt_noID.exe or anything else.
I am running out of ideas. If i try and install:
RUU_Leo_TMO_UK_1.43.110.0_Radio_Signed_15.25.50.07 U_2.04.50.20_3_Ship
I get an error "Error 294 - Invalid Vender ID". So i google for some answers and i get:
pocketnow.com/tweaks-hacks/htc-hd2-custom-roms-waiting-hardspl
and
forum.xda-developers.com/showthread.php?t=252704
Some how I can't get a correct software to unlock my phone so i can install a compatible ROM.
Anyone got any ideas?

i got a telstra one too..the buggers almost had me fooled too..answer is simple,i found,after almost throwing my phone at a wall,coz i thought i was locked in to thier rom.... just install ,flash, the original telstra 1.42 shipping rom,which allows you too install hspl and flash away..coz its a telstra rom ,the device will accept it..i found the 1.42 telstra rom here..good luck
as i found out,our phone can only use hspl at the moment,which is fine,coz ive been flashing my roms more than using my phone, lol...anyway,worst case scenario,after hspl on my phone,i just had to push reset behind the cover and hold vol switch down to enter bootloader,no dramas... just flash the official telstra .42 rom first,not uk or anything else.....

anton69 said:
i got a telstra one too..the buggers almost had me fooled too..answer is simple,i found,after almost throwing my phone at a wall,coz i thought i was locked in to thier rom.... just install ,flash, the original telstra 1.42 shipping rom,which allows you too install hspl and flash away..coz its a telstra rom ,the device will accept it..i found the 1.42 telstra rom here..good luck
as i found out,our phone can only use hspl at the moment,which is fine,coz ive been flashing my roms more than using my phone, lol...anyway,worst case scenario,after hspl on my phone,i just had to push reset behind the cover and hold vol switch down to enter bootloader,no dramas... just flash the official telstra .42 rom first,not uk or anything else.....
Click to expand...
Click to collapse
Have you got a link to the original .42 rom that Telstra used? I dont have anything

Wilo300zx said:
Have you got a link to the original .42 rom that Telstra used? I dont have anything
Click to expand...
Click to collapse
Did you look here maybey?
http://forum.xda-developers.com/showthread.php?t=577717

there ya go bud.....http://htcpedia.com/forum/showthread.php?t=1474... i also messed up with the rom version,lol,im new at this myself..that rom will give you 1.42 spl so ya can load hspl and flash ya guts out lol....

[Q] Do i have the right SPL?

Hi everyone,in advance i would like to tank everyone that take the time to read this threat!!!here is my question...i had a Nand Android Rom on my Hd2 and unfutunaly the phone stop getting signal(phone's problem)and i have to send it back to Tmobile.i read all the theats i was able to,and to what i understood i had to flash a stock windows 6.5 rom,i also read on a theat that any SPL ending on .0000 would valid my warranty!!!every thing its done to the phone...i now have a stock rom and my SPL is 2.08.0000. My question is...is this the right SPL for US T-moblile users?if not,can anyone link me to where i can find it?ones again guys!!!thanks a lot for the time!!!

That all depends on the build, it could also be 2.10.0000 or 3.03.0000. If you flash the original rom from the sd card you will get the correct spl version back as that is also installed.

If u have a SPLhigherthan 3.03, is that bad? Or just different? Cause when i got my phone back from repair i could play andriod on SPL 3.03 (or higher) and i had to downgrade my HD2

Not necessarily bad, it's just that the tools to "hack" the spl to allow you to install other roms does not work with spl 3.03.0000. The way around this is to downgrade the rom and with it the spl version to 2.10.0000 so that you can run HSPL.