i let the battery run down on my wizard running WM5 and when it was almost dead and i tried to restart it told me it was booting in "safe mode". i recharged but now when i restart WM5 appears to boot straight into safe mode (spb pocket plus and a bunch of other stuff doesn't load). can anyone tell me how to get my wizard to boot into Normal mode again?
Related
First of all, it's not my device, it's my coworker's, and he brought it to me to install some sw for him few days ago, cause he is bigger newb to WM than me All the programs were installed to main memory, so i noticed that there is too little memory available. So we agreed that I ll do a cleanup for him and restart his programs in a few days, and finally he brought it over today, but the battery wasn't in the device for probably more than a night. Now it won't boot windows, it goes to windows mobile screen with "boot into safe mode" message, so wheter I boot into safe mode nothing happens, and if I go into normal mode, it just restarts
Any help?
Hard reset worked, I'll see where it goes from here
Looking for some help, my phone broke so a friend gave me his old g1 that has been rooted. when i power on the phone i get stuck in the boot cyctle of the g1 logo and then off and the repete.
i cant get the g1 to do a restore, the only change i can get is when i hold the back key when i turn it on. i get the rainbow scree and "serial 0" cant get into fast boot....
if possible i would like to get this device usable and even better with a cstm rom and froyo or what ever is reccommended.
any help would be amazing.
a small update, i did get it to boot recovery mode once, so i rebooted the phone and android started. i got a low battery notice and pluged in the usb cable and it imeditaly rebooted and started the cycle over and over agian. i have not clue why that time it actualy booted, i let the battery charge for 30min and tried agian with no luck.
Background: I bought this phone on ebay mainly for development testing of apps. The seller has a high reputation and said that the device would boot to the insert sim card prompt. Upon receiving the phone it always boots to the download mode, I am new to Windows Phone 7, I tried to get it to hard reset, I downloaded Samsung-i917-Focus-firmware-UCJK2-ATT-USA.exe extracted the files and installed the usb drivers. The 7.05 version of the program runs copying files to the phone and you can see a progress bar at the bottom of the download mode screen. When it gets to the end and reboots it immediately goes back to the download mode screen and from videos I have found it should go to a transfer screen. The program does still go with the rebuilding part but the phone stays on the download mode screen. I have waited over an hour after the program said it was complete. I have also pulled the battery after a half hour and on pressing power it goes back to the download mode screen. Hardware version 1.3
Any help with this is greatly appreciated.
Hey everyone,
This morning i was doing a backup on my lg d803 straight from twrp and the screen turned off. I left it like that for about 10 minutes to make sure the backup would finish.
However, the screen still wont turn on. The phone rebooted once into the lg logo and turned off. It is now stuck like this. It won't boot back into anything
-The phone won't turn on.
-It can't boot into recovery or download modes.
-It it not recognized by my pc in any way (win 10 64 bit with LG drivers installed).
-Holding the power button does not turn it on, not even to the lg logo.
-the button combo for recovery mode does nothing either.
alexander_the_great said:
Hey everyone,
This morning i was doing a backup on my lg d803 straight from twrp and the screen turned off. I left it like that for about 10 minutes to make sure the backup would finish.
However, the screen still wont turn on. The phone rebooted once into the lg logo and turned off. It is now stuck like this. It won't boot back into anything
-The phone won't turn on.
-It can't boot into recovery or download modes.
-It it not recognized by my pc in any way (win 10 64 bit with LG drivers installed).
-Holding the power button does not turn it on, not even to the lg logo.
-the button combo for recovery mode does nothing either.
Click to expand...
Click to collapse
I bricked mine last week. Got it into dowload mode (don't remember, google it) used lg mobile support tool and did recover phone from options and worked like a charm. Didn't even lose any of my installed apps.
Maybe battery level is low
Download mode did not work for me with low battery
I charged for about 2 hours and still could not get into download mode. i tried holding the volume up button while pluging it into the pc and nothing happened on the pc or the phone. No connect sound or anything.
Charging and using combo's don't always work, you should ideally boot into download mode before attaching. Perhaps you should try and make a MacGyver cable with a spare/broken usb charger to charge the battery directly - in-case the port or something is broken.
hi all,
Just come back from holiday and SM-G928F edge plus (european model) battery was completely flat.
I charged the mobile and booted it up, loaded into Android then sounded like a lots of notification alerts then phone made a loud buzzing noise and crashed/auto-reloaded.
Since then it had gone into a boot loop. Tried holding power and vol down to reboot phone. Initially this function worked then no longer worked. Phone still stuck in boot loop...
Could not get into safe mode (hold power and vol down then release power)
Tried in recover mode (hold power, vol up and home), tried clearing cache took ages about 1 hour, also tried the format option, rebooted system and still boot loop..
Tried going into Odin mode (power, vol down and home) , used ODIN s/w and installed the latest XER version firmware, got success message but still boot loop...
Interestingly when I left it to constant boot loop, eventually it booted up Android now. However once I start using the mobile it intermittently reboots the mobile and then goes back into boot loop again...
When I did manage to get into Android I tried using an app to check the mobile health, strangely I notice it said I only had 1gb ram spare and the rest was used when mobile was factory reseted and I didnt expect so much RAM in use. During stress test mobile crashed and gone into boot loop again...
I am not sure this was affected by an auto update that may had gone wrong.
I don't root, just used stock firmware.
UPDATE:
Left mobile in boot loop until battery went flat, fully charged it and now can get back into Android. But it started to auto update some app and then auto rebooted/crashed and went into boot loop again.
Please help.
Thanks
Is there anyone who can help me please?