Ok...Im new to XDA and have always come here when I've needed help. However, after looking around I cannot find an answer to my current problem. I have a T-mobile wing with a 6gb storage card. I have all of my software, movies, pictures, ie cache, and pictures installed to my storage card. My problem is that my main system storage seems to be decreasing by the day. I am down to 3.5mb and have no clue as to what is consuming the space. I have run scans for large files and have even run sktools to make sure that im clearing out everything. Has anyone else experienced this problem? Any help would be greatly appreciated.
Danny
Already tried a soft-reset?
It usually clears it up and otherwise check if you have set your storage card as storage for your mail attachements.
Yep...I've done all of that and nothing. Im really running out of options and dont want to do a hard reset to have to re-configure everything how I have it now. urggg
Try using this.
I'd also suggest using PocketMechanic or MemMaid ... and I'm sure SkTools will do it too to clear out all the crap that you can.
With PocketMechanic, you can "relocate" installations from the main device to the storage card, and that may help you as well.
I had the same problem. Then I stuck Open Touch 2.6 on it, and all of a sudden it ran way better. I was really apprehensive about doing it at first too since I was happy with my settings. But really, it's worth just taking the plunge. I went from 5mb to what, over 30mb free and it seems like I have the exact same setup (in fact, MORE programs) and they are on the device and not the card, too.
The standard ROM just really whacks your phone.
The Stock Rom sucks ass. I use TouchIT 4.4 and I'm extremely happy with it.
Thanks for all the info. After looking at some of the threads on the two roms recommended im seriously considering doing so. 3 quick questions....1. Can I revert back to the original rom if needed? If so, how. 2. Is there a feature that my phone has now that these roms do not have? 3. Will flashing the phone with one of these roms void the warantee on my phone? Thanks again!
1. Can I revert back to the original rom if needed? If so, how.
Yes, by running the Stock T-MOBILE RUU
2. Is there a feature that my phone has now that these roms do not have?
Any of the Tmobile crap ... myfaves, hotspot logins ...etc... but you can install most of those with a cab.
3. Will flashing the phone with one of these roms void the warantee on my phone?
Yes. Theoretically. But again, if you ever need to send it in, you can install the Stock Tmobile RUU and hopefully you won't have any problems.
Yeah....better off. I dont need the extra T-mobile crap any ways. Which rom is best? I looked at the one you have and that one seemed better.
btw....what exactly does the page pool hack do?
Different people on here will reccommend different Roms.
ITJE has been around making Herald/Wing ROMs the longest and he's the Godfather of the Herald/Wing Rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
roman2113 said:
btw....what exactly does the page pool hack do?
Click to expand...
Click to collapse
This should help you out:
pof said:
What is the Page Pool?
Quoting mamaich:
The large the paging pool is, the more code pages can present in RAM simultaneously -> the less loads from slow ROM -> the faster the device is.
Quoting Mike Calligaro from Windows Mobile Team Blog:
In general terms, there are a number RAM uses that aren't reported in the Memory CPL.
For instance, an OEM might set aside a fair amount of RAM to allow the camera to write directly into it without using the CPU (a DMA buffer). Typically the way they do that is to tell the system there is less than the available RAM and then use the RAM the system doesn't know about.
Another example is something called the "page pool." This is similar to the "page file" on a desktop system, and is heavilly used on NAND systems. The page pool isn't something a user can configure, so there's not much point in showing it in the Memory CPL.
Code that can't be shut down or paged out, especially drivers, isn't shown on that Memory CPL either. There's no reason to show you the RAM the display driver is using, because you can't do anything about it.
Applications use RAM in two ways. There is code that runs, and there is data that is created while it is running. On a NOR device, the code can run directly from the ROM and not be loaded into RAM first. This process is called XIP (eXecute In Place). NAND devices can't XIP, so their code is loaded into RAM and executed from there. If you don't have a Page Pool, this code is loaded into normal RAM. The Page Pool is a mechanism to limit how much code is loaded into normal RAM. With a Page Pool, we can unload code that hasn't been used in a while and reload it later if we need to. We can't do that without a Page Pool.
More information:
http://forum.xda-developers.com/showthread.php?t=276630
http://blogs.msdn.com/windowsmobile/archive/2005/11/17/494177.aspx
http://blogs.msdn.com/windowsmobile/archive/2005/08/19/453784.aspx
Click to expand...
Click to collapse
Bro...thanks so much! You have been extremely helpful in answering all of my questions. I think I will be trying out the Touch-It rom this weekend. Hopefully this fixes my original problem.
No probs. Anything else, let us know and we'll be glad to help you out.
duprade said:
Different people on here will reccommend different Roms.
ITJE has been around making Herald/Wing ROMs the longest and he's the Godfather of the Herald/Wing Rom.
Click to expand...
Click to collapse
lmao, funny
Related
Guys, someone was asking for a Bluetooth Manager for the Magician. I have no idea if this works, but it seems to load ok. It's from the eten rom.
It might do nothing at all, but it looks cute :wink:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cab
Zip
Note, it should be installable anywhere. But you have to launch it twice to load it. And it only closes properly with a task killer.
V
V
Tried installing this on the Uni and just won't go on. keeps saying unsuccessful both to storage and device before and after a soft reset
Any ideas
Scott
The same thing here. Not able to install it...
Works ok on my Magician and Universal. Have you done the certificate unlocker patch?
I've reposted it as a zip as well, above. Just decompress and launch (twice).
V
vijay555 said:
Works ok on my Magician and Universal. Have you done the certificate unlocker patch?
I've reposted it as a zip as well, above. Just decompress and launch (twice).
V
Click to expand...
Click to collapse
Vijay now it is working on my Universal. But there is a small problem. It doesn't show good in VGA resolution. The icons and text seem really distorted... Would it be possible to make a VGA version?
Thank you in advance for all your contribution...
Mythozz: it would be possible to make a VGA version - it's all resource hackable. But I'm only posting it as a curiosity. Unless there's overwhelming demand that indicates it's useful, I'll leave it to someone else to resource hack... (and please post your results back here).
Have you found it good for anything? I don't think it particularly adds any functionality, just puts it all neatly together in one place. But I don't really use Bluetooth, so can't say if it adds anything.
V
Works nice on my SPV M3000 (NL).
Nice looking tool, to bad you have to scroll on some pages
vijay It is working just fine with my Uni, no problems at all. It's really nice that I can do anything I normally do with Bluetooth, but in a more sophisticated way... I use it all the time, I have a BT headset, a BT carkit, I ActiveSync with my PC via BT, exchange files as well so I have to admit that I am a fanatic user of such programs.
I understand that it is trouble for you to create a VGA version, so I will wait and see if you or someone else comes up with such a version. If not, no worries, in any case I thank you for a usefull program
Good to know it works! If I get a bit of time, I'll resource hack it, but anyone with VS2005 can open it up and do it for us - I'm desperately trying to finish a UI for VJToggleToday II so am very tied up
V
ps anyone tried the ftp setting. Looks quite curious!
scotjen1 said:
V
Tried installing this on the Uni and just won't go on. keeps saying unsuccessful both to storage and device before and after a soft reset
Any ideas
Scott
Click to expand...
Click to collapse
Idem for me with my 9000
So i opened the file with WinCe cab manager and extracted the two dll files and the Bluetooth Manager.exe
I click on it twice but nothing appears
What's wrong ?
Thank you in advance Vijay :wink:
Diggia: I'm not really sure. Perhaps start with the zipped version, decompress and copy folder to Phone. Again, launch twice.
I'm sure you have already, but make sure you have de-certified your phone first.
Otherwise, I'm not sure. As I said, this is stolen from the Eten, but it works on both of my phones:?: If the zipped version doesn't work, I'll try looking into it further.
V
Works on my O2 mini ,i used the CAB...Good job bro
vijay555 said:
Diggia: I'm not really sure. Perhaps start with the zipped version, decompress and copy folder to Phone. Again, launch twice.
I'm sure you have already, but make sure you have de-certified your phone first.
Otherwise, I'm not sure. As I said, this is stolen from the Eten, but it works on both of my phones:?: If the zipped version doesn't work, I'll try looking into it further.
V
Click to expand...
Click to collapse
Now I try again, thank you Vijay
Just for curiosity, what can i do to see if my device is de-certified ?
:wink:
Diggia: just the usual, try running any of my cabs and see if they install. Ie your system is set up to run uncertified software... I can't remember what system you're using, but the regedit is probably in the wiki if you need it, and there are a few cabs in the hacks section to do this. But I'm sure we're all running a decertified system now anyway!
V
I install your cabs without any problems (I have just installed VJDeviceLock, very useful !!!)
About the system, i have Qtek 9000 (WM5 obviously) with the last Qtek italian Rom taken from the FTP
I have installed the EnableRapi.cab also
The VJBlueToothManager must be run from memory ?
Because I try to launch your application from SD
:wink:
Should run from anywhere. Very strange why it doesn't work? Can't think why...
V
vijay555 said:
Should run from anywhere. Very strange why it doesn't work? Can't think why...
V
Click to expand...
Click to collapse
YEAH, it works !!!!!!
I resolved uninstalling the Tanworks BT Stack (do you remember ?) and now it works, wonderful work Vijay !!!
Thanks a lot :wink:
PS: What's VJToggleToday II ?
Diggia - wow, didn't think of that
VJToggleToday II is an app to maximise the screen space of the Today screen, by shrinking the start bar and softkeys to an option size.
eg (not my screenshot)
I'm currently working on transforming it into something much better, hopefully But the current alpha works quite well.
V
WOW !!!! :shock:
Excellent work, i must try it ! 8)
ViJay,
I think this is the only bt app that can do ftp!! It's great (I use it only for this ability)
It would be great if this can be modified, so that pairing can be done (it currently does add something in the registry, unusable but is something )
I'll literally fall in love (of the manager of course XD)
Speaking on your start-softkey bars hack, it looks really nice: but what software can I add to add another customizable start bar with the same features? and how can I show the icons in the lower bar? Keep the good job!!
Cheers, MocciJ
in GIGABYTE's new models like I-Teq Bond
there is built in answering machine you can see details in http://www.iteqonline.com/bond_details.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
as far as i know there is no Answering system works with wm2003
so i think the problem regarding the answering machine has been solved in WM5 but there is no individual application to enable answering system on other wm5 phone edition PPC's like Prophet, is there any answering program like the one used in i-teq?
please introduce it if you any.
here is screen shot of i-teq bond
lover - this is a specific software and hardware solution provided by Gigabyte. It's not a generic WM5 solution.
Have a read around the board on why that might be the case.
V
http://www.pocketpcthoughts.com/articles.php?action=expand,46925:dont_paginate,1
page down for Gigbyte answering machine built OS software, dam why didnt IMATE think of this !
Jus found this on Google. Supports HTC Universal
http://www.boointeractive.com/products.asp
SMS Answering Machine v1.0
Release Date 1/1/2006
Requirements Pocket PC
Desktop PC
1MB of space
100Kb of Memory
Answer your calls when you're in a meeting or can't pick up the phone. This sms answering machine becomes your personal assistant, and replies to your selected callers by sending your custom message.
Handle your calls when in a meeting or on vacation using this top of the line answering machine.
You can also reply to unknown numbers, the ones that are not in your address book, by selecting the "reply to unknown" checkbox.
You can view all your calls from within the application, the name of the person, time of call and how many times the phone rang.
Digs said:
http://www.pocketpcthoughts.com/articles.php?action=expand,46925:dont_paginate,1
Click to expand...
Click to collapse
The overdub could be awesome too.
"If you don't feel like talking to a particular individual (i.e. annoying friend, boss, spouse, or debt collector) and need a digital alibi, the Background Effects feature adds a looping ambience of being in a car, airplane, concert, meeting, movie theater, and more."
Click to expand...
Click to collapse
As I stated before, Gigabyte added some really neat functions, especially to the phone portion of the device. For starters, they've included answering machine software!
Click to expand...
Click to collapse
so i think this is a software which is in ROM and there is no hardware added, ithink so.
it would be great if some one get that software from the original ROM.
thanks for sharing
lover: I'm inclined to disagree. I've tried the app on the Magician, Universal and Mio A701. No joy.
The attached, ripped from the ROM, may require other associated files, but I've tried the whole ROM in its complete form. It appears to be non English, so I may be reading it wrong, but let me know if you have any luck.
V
vijay555 said:
lover: I'm inclined to disagree. I've tried the app on the Magician, Universal and Mio A701. No joy.
The attached, ripped from the ROM, may require other associated files, but I've tried the whole ROM in its complete form. It appears to be non English, so I may be reading it wrong, but let me know if you have any luck.
V
Click to expand...
Click to collapse
than you very much but
it didnt work on my JAMin., does any one knows which company is the developer of this software?
Maybe I'm missing something here, but can someone enlighten me as to why you would want an answering machine on your phone when your mobile phone carrier already supplies you with that service? Just want to make sure I'm not missing out on any features here.
i dun think its just a software api that does this answering machine..
most likely to be a hardware inside the phone that is not present in other phones.
It is just a software!
There is a rom (2.03 Beta TofClock Himalaya) and it has this answering machine...
bepe: I think that's specific to the Himalaya. Because of the way the modem works on PocketPC phones, not all (in fact, it seems, very few) have the audio path accessible by the device itself for two way recording.
Have a read through here. If you've had any sucess, please post:
http://forum.xda-developers.com/viewtopic.php?t=40100&highlight=record+poll
V
thanks vj for clarifying
thank you all for you comments but still no way to make this software work with prophet
Digs said:
http://www.pocketpcthoughts.com/articles.php?action=expand,46925:dont_paginate,1
page down for Gigbyte answering machine built OS software, dam why didnt IMATE think of this !
Jus found this on Google. Supports HTC Universal
http://www.boointeractive.com/products.asp
Click to expand...
Click to collapse
To pay $ 18.95 for an app that you can do for FREE? I've reported about a long ago (it's REALLY worth following my blog ) - I'd certainly prefer it to this one.
hope anyone can make it work, this will be great
gwassef said:
hope anyone can make it work, this will be great
Click to expand...
Click to collapse
Just my two cents...
I don't think the software won't work on any device other than g-Smart range, it's to do with the hardware of the phone, not WM5. Without this hardware I believe it is impossible to record both sides of the conversation without some massive application, which will probably (a) slow the ppc right down, as will need to be integrated into the OS, and (b) not be that cheap either.
Regards.
just a quick qn.. if i want to try on my hermes, how to i 'install' it?
do i need to tweak any registry settings?
thanks
that would be a great app i think!! i'm on pay as you go and orange charge 10p per min to retieve voicemail!! would be super if the phone itself took over and saved an mp3 or something to the memory card!!! no charges!!
come on!!! some make or find it!!!
Hey Guys,
I has been a long damn wait, but I finally got the long awaited Skyfire first release. I will share the cab here. However, I do believe that you need an account to use it (kinda like M$ did with their new browser)
However, there are a few things about this new Browser:
1. Since this is the first release, it is relatively slow (not in the loading of the page, but in the scrolling, zooming, and anything using flash (youtube, flash games, etc).
2. I am not sure if it has anything to do with the browser itself, but I installed it, I run the browser for a few minutes with a wifi connection, and the next thing I know, my Blue Angel is about to shut down due to having almost no battery (8% left). Did I mention that I had roughly 75% battery 15 minutes earlier? On an extended Battery?!?!?! (~2400 mAh)
I knew that flash apps have the tendency to run your battery dry but... damn!
Like I said, I posted it because I just felt that it was the right thing to do, to share this with my fellow xda-users
Other than that, this looks rather promising. I will update as I receive any new updates from these people.
Sorry, this is no help for the majority of the users. Will give an error message about System authorization. Thank you for the effort. I personally hope to get my code soon
thanks will try it out
same here with the system authorization..
but i a least saw that it does not take the persumed "20 seconds" to boot the browser up. took me about 2sec. on my tilt
TurboX2 said:
same here with the system authorization..
but i a least saw that it does not take the persumed "20 seconds" to boot the browser up. took me about 2sec. on my tilt
Click to expand...
Click to collapse
Actually, it did take about 20 sec to boot on my BA. I guess that I oversaw that little detail
coolphilip04 said:
Sorry, this is no help for the majority of the users. Will give an error message about System authorization. Thank you for the effort. I personally hope to get my code soon
Click to expand...
Click to collapse
I figured that much, but I just thought I would give it a try. Heck someone could probably hack that code. We have good, skilled programmers here ...
Just Kidding!!
Since this doesnt work on all devices (except the choosen beta testers), please change the title
have downloaded the cab, just freezes when trys to connect to the web. hope that either someone cracks the security or they hurry up and release in the uk
system authorization error... please reinstall... can anyone help... eager to use this app...
You know....you could just always sign up on their website and have the program link sent to you!!! Thats what I did and it works!!1
Don't work on my Touch...
An error comes out and the program says: "unistall skyfire and then reinstall it".....
ryncppr said:
You know....you could just always sign up on their website and have the program link sent to you!!! Thats what I did and it works!!1
Click to expand...
Click to collapse
unfortunately ryncppr, im living in other country that the app is supported. maybe ur living in the listed country...
Anyone receive any invitations today ?
no crack yet
rtakeo said:
no crack yet
Click to expand...
Click to collapse
It's server based, so don't expect a crack.
evandena said:
It's server based, so don't expect a crack.
Click to expand...
Click to collapse
Wasn't deepfish too? There was a crack eventually. Browser was **** though
No BetaTester? Don't use it!
Just found this....
I've taken a look at SkyFire & it doesn't look good. It's not possible to force authorization as it depends on a secret PGP keypair shared between the activation server & the device. A meet in the middle attack would be our next best bet but this is not guaranteed as they're using SSL to encrypt the packets flowing between.
Even if the app were cracked to force successful authorization on the client side it would just freeze & wait for a non-existent response from the authorization server. A crucial part of the activation would be that it compares the IP of the client to determine their geographical location & any place outside the US results in an "Invalid authorization" response.
Another possibility is to access the server through a tunnelling exploit but this highly depends on the configuration of the server itself. I doubt that they'd leave this channel open.
Also something interesting to ponder:
Code:
.rdata:0007BA0C aReset DCB "Reset",0 ; DATA XREF: .text ff_28DE0o
.rdata:0007BA12 ALIGN 8
.rdata:0007BA18 aScheduledAHard unicode 0, <Scheduled a hard reset for tstamp=%d>,0
.rdata:0007BA18 ; DATA XREF: .text ff_292BCo
This is a debug message that would not be displayed to the end-user so there exists a condition where it secretly schedules a hard-reset of the client's device. Nice going, SkyFire
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You just copied that from ppcwarez.org, nice job claiming you "found it" yourself
E_Shinobi said:
You just copied that from ppcwarez.org, nice job claiming you "found it" yourself
Click to expand...
Click to collapse
That's where he found it
You should qoute things like this so people with too much time (like me) will stop *****ing about it
Can anyone tell me why the program usage is so high on the Tilt II with no programs open?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have attached a screen shot from my phone.
Thanks for the help.
Jim Jep
JimJep said:
Can anyone tell me why the program usage is so high on the Tilt II with no programs open?View attachment 269909
I have attached a screen shot from my phone.
Thanks for the help.
Jim Jep
Click to expand...
Click to collapse
is this after a fresh power cycle? are there programs in the recent program list? do you have alot of startup apps running? do you use CleanRAM? looks like only about 35-45mb of memory is used up by apps, the other 80mb is all system programs that you cant stop. check whats in your startup folder in my device/windows/startup. with only 94mb of storage space left, looks like either you got alot of apps installed or you got a ROM loaded with apps on the main memory...what ROM are you using?
HA your using a 6.5x ROM...can tell by the start icon. try finding another ROM that has more memory...check the specs. also still tell me the answers from the above so i can further help you
JimJep said:
Can anyone tell me why the program usage is so high on the Tilt II with no programs open?View attachment 269909
I have attached a screen shot from my phone.
Thanks for the help.
Jim Jep
Click to expand...
Click to collapse
Go to the got mine thread sticked in the general area, there is a post of mine with 2 .cabs you can download to help alievate the problem. The issue is that the phone is running opera even when you X out and as well is caching all the apps. These two cabs stop that, I installed it and get the mem usage down to 45% at startup.
Cant find your thread even looking for threads started by you.
try these cabs...
these are not my work, can't remember who i got them from.
Thank you. I instlled both on my Tilt 2, soft-resetted and went down to 49% from about 69%.
So far it seems fine.
Testing on stock WM 6.5
I just installed both cabs,and I will let you know about the impressions.
I am running stock WM 6.5 on my Touch Pro 2.
The good thing is that both files appear in Remove Programs list,so if any side effects are being noticed,both files can be simply uninstalled from phone.
Let us wait,and see
Thanks for the links.
thnx for the apps btw.. I just installed both of them and went from 75% to 51% of free RAM. ..no more auto start for Opera .. Will be back with furthur info on how its going.
nayr1482 said:
try these cabs...
these are not my work, can't remember who i got them from.
Click to expand...
Click to collapse
what do the two programs do? what program does what?
Hello !
vim0314 said:
what do the two programs do? what program does what?
Click to expand...
Click to collapse
As far as I know,the smaller one turns push internet off,so it will not run in the background constantly.
The other one,bigger,prevents Opera from automatic start,and running in the background even when you exit the Opera browser. Maybe you did not know,but when you turn the phone on,Opera starts automatically and runs in the background all the time,whether you close the program or not. And that process is hidden,therefore,you can not kill it,nor end it using task manager.
I installed both applications two days ago,running stock WM 6.5,and I am now testing. I am now IDLING at 60 % of RAM usage,instead of 76% prior to installation.And phone runs great,no changes at all,without any glitches whatsoever....so far
^^^ Thanks!
what does the push internet do? like what are the advantages of it and disadvantages of it?
also is there any advantages of having opera running in the background?
nayr1482 said:
try these cabs...
these are not my work, can't remember who i got them from.
Click to expand...
Click to collapse
vim0314 said:
what do the two programs do? what program does what?
Click to expand...
Click to collapse
no push internet disables opera from auto dloading pages and save a good amount of mem. not sure about the other.
RAM Cleaner
Well guys,after several days of testing these two cabs,I found out that in fact,they do not work on WM 6.5
They work when the phone is started,because the phone starts with much less memory used,but after browsing in Opera and Skyfire and camera actions,memory leaks again and comes to 76 - 80 % of usage,and it can not go down without resetting the phone.
I Installed RAM Cleaner and it is far better option. It also has schedule,so you can set it to run automatically and keep the RAM clean,without you even do anything.
Anyway,thanks to the creators of those two cabs.
^^ what program did you install? is it called CleanRam 1.7?
also will this work with EnergyROM "Phoenix 2" 21889
Yes it is.
Yes it is,you can find it under applications section thread...
Honestly,I do not know will it work with the ROM you mentioned,but I think it will.Read the posts about it...I read many of them,and I did not find that anybody complains no matter what ROM they use.
Try it...it is my advice.Nice software tool.
aleksandar0475 said:
Yes it is,you can find it under applications section thread...
Honestly,I do not know will it work with the ROM you mentioned,but I think it will.Read the posts about it...I read many of them,and I did not find that anybody complains no matter what ROM they use.
Try it...it is my advice.Nice software tool.
Click to expand...
Click to collapse
using it right now and seems to be working... having it clean level 2 every 6hrs.
BE CAREFUL USING RAM CLEANERS WITH MANILA/SENSE. IT WILL FREEZE AFTER THE CLEAN BECAUSE OF SOMETHING WITH MANILA/SENSE RESTARTING. PUT MANILA/SENSE ON YOUR EXCEPTION LIST BEFORE YOU CLEAN SO THE CLEANER WILL CLEAN UP RAM OF EVERYTHING BUT MANILA/SENSE.
akademik_acheeba said:
BE CAREFUL USING RAM CLEANERS WITH MANILA/SENSE. IT WILL FREEZE AFTER THE CLEAN BECAUSE OF SOMETHING WITH MANILA/SENSE RESTARTING. PUT MANILA/SENSE ON YOUR EXCEPTION LIST BEFORE YOU CLEAN SO THE CLEANER WILL CLEAN UP RAM OF EVERYTHING BUT MANILA/SENSE.
Click to expand...
Click to collapse
Not a tech guy to prove it, but I am using htcCleanRAM for quite a while and I have never had this issue. I clean the RAM with HTC Sense on and it works fine each time
Hello!
@akademik,
Thanks a lot for your advice,but I have to admit that I have been using it all together with HTC Sense,and it never froze...
Anyway,it costs nothing to put Manila/Sense on exception list....if any issues are being noticed.
Regards,Alex.
Hey guys, this is 2 Bunny. This is kind of my introduction thread. I share an account on here with KAINPPC6700, so some posts will be from me, some from KainPpc6700.
I've found that this is a very helpful community and have found some very useful hints, CABS, and more on here. I cook over at PPCGeeks for the CDMA HTC Diamond and prefer the tried and true WM6.1, build 21055. I've found that it may be best that I expand my horizons and use both sites for the betterment of the community. I am just a few weeks away from another major ROM release.
Anyway, the real reason I stopped in to post this thread was because I was asking about my 0ld school hp iPAQ h4155/h4150 (I wonder if anyone still has any of these things) and thought it might like a much needed upgrade to Windows Mobile 5, as it runs Windows Mobile 2003 by default, and if you've ever dealtwith WM2003 before, you know how annoying and picky it is about everything. The hardware specs look disappointingly low as far as ROM and RAM are concerned, which brings me to my next question: "Is there anything you can do as far as cooking ROMs is concerned if nobody made a kitchen?" I don't even know if people cooked custom ROMs back then, but at any rate, I'm not sure at all about it which is why I'm asking. It seems like it could be useful as a backup device, but many of my applications wouldn't run on WM2003, and I am really slow as far as getting a new one/getting it fixed/etc. are concerned. Not that I plan to break my Diamond or anything though, LOL! I hope to use that for years to come (as long as Windows Mobile is still usable) and continue to cook for it, but it would still be fun to relive the good ol' iPAQ 4150.
Thanks guys.
- 2 Bunny
There's nothing you can do with it.
And as it does have 32MB ROM, WM5 was never made for it as it requires at least 64MB ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think you're pretty much doomed if you don't have the kernel source and drivers for WM5. WM2003 is totally different from WM5 and later because of the non-persistant storage. You're best bet is to just try building custom 2003 roms, and that may be pretty tough, too.
FARMER TED Reply
Farmer Ted said:
I think you're pretty much doomed if you don't have the kernel source and drivers for WM5. WM2003 is totally different from WM5 and later because of the non-persistant storage. You're best bet is to just try building custom 2003 roms, and that may be pretty tough, too.
Click to expand...
Click to collapse
I guess that's the next best thing. Do you know of any places where I can cook or find custom WM2003 ROMs for h4150? Could it maybe be upgraded to WM2003 "SE". That's a small step forward in and of itself.
Thanks for your help though.
- 2 Bunny
I have no idea. I have a 2003 device, too (asus mypal), and I looked around for kitchens/roms for it, and all I ever found was the occasional post from someone looking for a rom for it, lol. The device I had never got any updates, so there aren't any official roms available. I've tried dumping the rom with pdocread and it didn't work at all. I've also tried buzz lightyear's dumping tool (don't remember the name), and all it seemed to dump was the bootloader (I found others who had the same issue).
Your best bet is to try to find an official rom for the device, and then dump it. You're probably going to brick it, though, don't you think?
For the asus, the closest thing to a custom rom is a linux port, which is available at handhelds.org. They patched the bootloader to dual-boot (linux off the cf or sd card). You have to flash the bootloader, but there are no actual roms out there. I'm not really sure when rom cooking started, but I suspect that few 2003 custom roms exist. You can look at the old forums here (like the himalaya), and there's not a lot of rom development, I believe.
Spiaatie said:
There's nothing you can do with it.
And as it does have 32MB ROM, WM5 was never made for it as it requires at least 64MB ROM.
Click to expand...
Click to collapse
Uhmm... doesn't the Blue Angel have 32 MB of rom space as well? You have some of the latest 6.5.5 builds running in it right now. Needless to say, you need to strip a lot of stuff from the SYS folder, but the biggest problem is not fitting the rom for the 32 MB, but rather porting the whole thing over.
☺ RAY OF HOPE Reply
egzthunder1 said:
Uhmm... doesn't the Blue Angel have 32 MB of rom space as well? You have some of the latest 6.5.5 builds running in it right now. Needless to say, you need to strip a lot of stuff from the SYS folder, but the biggest problem is not fitting the rom for the 32 MB, but rather porting the whole thing over.
Click to expand...
Click to collapse
That's the spirit. How feasible would "porting the whole thing over" be, or is it just a lost cause?
- 2 Bunny
Unless HP released a WM5 upgrade for the pda, you'll never be able to run a newer build because you won't have the nk.exe (or all the drivers). I guess if there was a very similar device that had WM5 on in it, maybe you could try to patch some stuff together.
Farmer Ted said:
Unless HP released a WM5 upgrade for the pda, you'll never be able to run a newer build because you won't have the nk.exe (or all the drivers). I guess if there was a very similar device that had WM5 on in it, maybe you could try to patch some stuff together.
Click to expand...
Click to collapse
Hmmm... I know they never released an official WM5 upgrade for it, but what kind of "similarities" would there have to be? Just the same CPU, or would memory, sound, screen controller, wireless, etc. Need to be present too?
Thanks.
- 2 Bunny
HTC Himalaya and similar were test hardware in HTC, while Microsoft was working on WM5. That's why we got WM5 for those devices - and later WM6.
HP IPAQ Reply
utak3r said:
HTC Himalaya and similar were test hardware in HTC, while Microsoft was working on WM5. That's why we got WM5 for those devices - and later WM6.
Click to expand...
Click to collapse
So we should have that for the h4150 is what you're saying?
- 2 Bunny