Can any one point me in the direction for new skins and how to get them to work, I tryed the ones form SMJ but i can't get it to work,
Thank's..
Related
can someone please give me some links for Dialpad skins for universal
ps : dial pad skins for hermis and other wm5 do not work with universal.( o2 exec)
Here is (probably) the best one
Cheers
hrb
http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=453
Try this http://forum.xda-developers.com/attachment.php?attachmentid=23064&d=1116272602
niketkumar said:
Try this http://forum.xda-developers.com/attachment.php?attachmentid=23064&d=1116272602
Click to expand...
Click to collapse
this is some video dude... the link above your works... can u please send me some link for xda exec dial pad skins... please
Have a look at this and b sure to read the whole instructions b4 installing them http://www.paulya.com/etenskins.htm
niketkumar said:
Have a look at this and b sure to read the whole instructions b4 installing them http://www.paulya.com/etenskins.htm
Click to expand...
Click to collapse
These are QVGA skins for Eten.
I think they work with uni also as they r for WM 5 , have u tried them ?
Paulya Phone Skins and HTC Universal
I have tried the skins from paulya.com on a Universal with ROM as below.
They do NOT work. I have attempted to modify the graphics of Pauly's very nice skins for my own use, this is possible and you can make the appearance on the screen appear normal at the corrected pixels per inch size, however, the underlying .dll that controls the layout of the touch screen that comes bundled does not ammend the touch responses correctly (as an example: in portrait mode the graphics for SPEED DIAL, HISTORY and TALK remain horiozontal above the number pad, whereas the .dll expects to find them in a vertical list to the right of the dialpad. If you have the time and the skills there are instructions on several forums (including this one) for editing the relevant dynamic link libraries.
The only skin I have found so far that works (as downloaded, out of the box, so to speak) on this device with its current ROM is O2's XDA Exec skin (or one made for it by a third party) which is attached to this post. This skin however consumes 2mb of storage for a minor change in appearance (transparent in place of solid graphics). I have deleted it.
Incidentally I have paulya's Vista phone skin on my HTC Himalaya. It is beautiful graphic work and makes the device very usable with one hand no pointer required. Thank you very much for all your hard work.
CORRECTION:
Further effort shows that the underlying .dll bundled with paulya's eten skins does amend the touchpad on the screen correctly. (i.e. you get the result you would expect by tapping on the screen, but the graphics will not display correctly even when they are resized to 192 pixels per inch. I would imagine there is only a small effort required to get from here to something that works but I do not know how to do that.
jvworldchampion said:
I have tried the skins from paulya.com on a Universal with ROM as below.
They do NOT work. I have attempted to modify the graphics of Pauly's very nice skins for my own use, this is possible and you can make the appearance on the screen appear normal at the corrected pixels per inch size, however, the underlying .dll that controls the layout of the touch screen that comes bundled does not ammend the touch responses correctly (as an example: in portrait mode the graphics for SPEED DIAL, HISTORY and TALK remain horiozontal above the number pad, whereas the .dll expects to find them in a vertical list to the right of the dialpad. If you have the time and the skills there are instructions on several forums (including this one) for editing the relevant dynamic link libraries.
The only skin I have found so far that works (as downloaded, out of the box, so to speak) on this device with its current ROM is O2's XDA Exec skin (or one made for it by a third party) which is attached to this post. This skin however consumes 2mb of storage for a minor change in appearance (transparent in place of solid graphics). I have deleted it.
Incidentally I have paulya's Vista phone skin on my HTC Himalaya. It is beautiful graphic work and makes the device very usable with one hand no pointer required. Thank you very much for all your hard work.
Click to expand...
Click to collapse
Hey i didnt get it right... the vista skin does it work on exec.... i suppose not.... please can u upload any working skin for exec.. i have been looking for the same for quite some time but the search is futile.... else upload the 2 mb skin u mentioned about... i m ready to sacrifice 2 mb for a good looking dial pad skin... thanx
PaulyA.com is no longer. For those of you who are still interested I have moved all my projects to JPL4Designs.com. The old site got robbed while I slept on it.. Mods, if you please update my links on the forums I would greatly appreciate it. Google is picking them off XDA-Dev and others rating the old site high. Thanks so much.
-Paul
Bump
Please someone,anyone show me what other dial pads we can use? I've tried a bunch and most don't work, either they're qvga or just don't work So if anyone has some that work please share or tell us how you got it to work.
PLEASE
has anyone of you more dialpad skins for the Xda Exec?
LegNuM said:
has anyone of you more dialpad skins for the Xda Exec?
Click to expand...
Click to collapse
Welcome to the forum
If you do a read and search you'll find some nice dial pads for Uni
Good luck,
Torx's iphone theme is excellent on my Touch (Vogue) except for the dialer. I tried switching from Narg to the other iphone-ish dialpads but they all lock up my Touch when switching from Keypad to Status. I also tried Polen's Vista Dialer but it does not work correctly with your theme. The Stock dialpad is miscolored and the Back button is invisible...aaargh! THERE MUST BE A DIALER THAT WONT LOCK UP MY TOUCH!!!!
Torx has responded:
if someone can get me an official cab of a wm6 dialpad that works flawlessly as far as smartdial and all that jazz..
i can take it all apart and redesign the graphics myself and not have to worry about tinkering the real innards to get features working because thats well out of my scope.
problem is, there so many 3rd party dialers out there and i have no clue which generalized dialpad i can use to base the design off of.. get what im saying?
so it has to be a dialpad .cab that isnt the original wm6 dialpad, but one that EVERYONE can use no matter what phone or brand, cdma or gsm.. etc etc..
Torx has done a tremendous job, and please, Anyone help with this last piece!!
come on guys! someone has to have an official cab...please
most dialpads ive tried so far, the smartdialing doesnt work.
TorxT3D said:
most dialpads ive tried so far, the smartdialing doesnt work.
Click to expand...
Click to collapse
you might want to ask one of the cooks... they might be able to extract the dialpad out from a rom... i think dutty or alex in the kaiser forums might know how to do this. (not trying to call anyone out lol) i just think that it would be awesome if we could get a really cool dialer with all the functions... (including OPTIONAL video) and transparent buttons so that the background can be chosen by the user... its not impossible im sure
Like I said before:
http://forum.xda-developers.com/showthread.php?t=321605
The iphone version of DuronMarcel works (smartdial).
If it had the graphics of the other version (narg), it would be perfect.
(sorry my bad english)
can you place the cab for DuronMarcel's? does it work with the Vogue? i tried one before that locked up my Vogue...
I tried the duron marcel dial pad with BA. it doesnt work...
I don't think there is a dialpad can work perfectly with both GSM and CDMA without any loss of functionality.
Most "dialers" that work with cdma phones i have seen are really just skins rather than a true new dialer. Your best bet for creating a iPhone "dialer" for htc cdma phones would be a dialer skin with the format similar to this skin:
http://forum.xda-developers.com/showthread.php?t=315685
with the digits spanning the width of the screen and two additional digits on top of the right row.
Of course, I really hope I am wrong, because this arrangement doesn't allow much flexibility.
anyone, please post the official cab for Torx to work on....thanksa!
superflysocal said:
I don't think there is a dialpad can work perfectly with both GSM and CDMA without any loss of functionality.
Most "dialers" that work with cdma phones i have seen are really just skins rather than a true new dialer. Your best bet for creating a iPhone "dialer" for htc cdma phones would be a dialer skin with the format similar to this skin:
http://forum.xda-developers.com/showthread.php?t=315685
with the digits spanning the width of the screen and two additional digits on top of the right row.
Of course, I really hope I am wrong, because this arrangement doesn't allow much flexibility.
Click to expand...
Click to collapse
oops double post
agentmikeyd said:
anyone, please post the official cab for Torx to work on....thanksa!
Click to expand...
Click to collapse
Duronmarcel (iPhone):
http://rs168.rapidshare.com/files/64143547/Dialer_Iphone_V1.01.cab
M.A.S. said:
Duronmarcel (iPhone):
http://rs168.rapidshare.com/files/64143547/Dialer_Iphone_V1.01.cab
Click to expand...
Click to collapse
This dialer does not work on the Touch (Vogue) from what I have read.
Please let me know if anyone has info that it will work on the Touch (Vogue).
Just upgraded to Sprint 6.1 Rom on my vogue and lost my dialer, anyone know where I can find it (CAB) again? I really dont like the new one since there is no "talk" button. Any help would be great. Thanks.
id be willing to bet google knows where that dialer is
Been looking for awhile now, maybe Google doesnt like me.... Thanks though.
Use the ppcgeeks kitchen, make yourself your own rom, unlock your device, put the vogue dialer in that ROM, flash and feel accomplished
ppckitchen.org
I'm not sure what is the name of the dialer though but it's included in open touch v4 rom for xda herald:
http://forum.xda-developers.com/showthread.php?t=377939
Frankly I really hated this dialer. The number buttons are small and very unresponsive. The color is not as pleasing. I recommend the iphone dialer of the newer minimal dialer.
that is actually the wm6 default dialer. I remember seeing a cab of it somewhere around here (for the wm5 folks)
This may be the cab you are looking for. From WM5.
I had to scout around and find it when i upgraded to WM6.
Cheers.
make the following edit in your registry and soft reset.
hklm\security\phone\skin\enabled = 0
thanks "black_mamba" @ ppcgeeks.
Hello everyone.
Recently i updated my HTC Touch Diamond to WM 6.5. Everything installed just the way it supposed to have. But i got 2 issues which makes me wanna come back to my old rom.
Previously i got old 1.93.479.3 stock rom but i needed to install it because i bough my phone from guy in sweden (im from poland) and needed rom in my native language.
To update i used Windows Revolution Manila 2.1 Edition 1.1A (23017) by mike1986 which had both windows mobile 6.5 and TF3d 2.1. And generally i love my new rom. Exception is 2 things:
1. What i cannot digest is the dialer. I just dont like. It is tachi's dialer with black skin on it. I would like to go back to my stock Diamond dialer (if it possible with the slider).
Dont get me wrong. Im not the type of guy who writes complain and wait for ready answer. I tried to make it on my own for 2 days now. I managed to change tachi's skin to white and it looked much better but to look great i need old white one. I found 3 cabs with that but none of that actually made things better (installed all: Diamond_PhoneCanvas_full_Eng_without_battery_icon.cab , xmatrix_PhoneDialerBlackS2A.cab. and Diamond_PhoneCanvas_Slide.cab - dont remember from where on xda i get it - sorry).
When i install any of them, tachi is gone but instead getting my stock diamond dialer i get wm dialer but without any skin - jsut black and white. When i choose to not use HTC dialer i get wm dialer again but with skin on it.
Dunno what im doing wrong but it is possibility that this is it - im a lumberjack not a telephone soft expert.
2. Dont know why, dont know how but in my new soft keyboard choosing is limited to only 1 position. I cant change keyboard layout in fly. Instead i need to run some .cab to which shortcut i have in settings area. Can i do something about it? I found already intelwrite for my new windows mobile but sometimes i need to change layout to phone because it is hard holding something (driving wheel or something else).
I wont bother u any more and im just counting that u will find a little time to help me. Thanks in advance.
Hi all
I want to port a dialer from the Photon to the Nike or the EzInput from the Rhodium
I was wondering if I can ask from the guru's who port dialers, Sense, etc from 480x800 to 480x640, etc what actually needs to be edited?
I have IDA and Restorator as well as a hex editor. I would like to learn how to go about this and want some help.
I know pcarvalho at one stage was porting the EzInput 2.1 before the MEGA was released - so I know that it is possible, just want to know how.
The main reason for the EzInput is that the Nike has a hardware keypad that doesn't seem to work with any Ezinput other than v1.5 and then there is a 16key version and a 20key version, so the builds are different - just want a more recent one that is QVGA and works with the hardware input also
Reason for the dialer is to correct a few errors in the MEGA dialer (already corrected the incoming call Position - but Call History is an issue) and I believe that V5 Phone Canvas solves this problem - I would also like to look at a more recent 3G dialer, but the only that I can do for that is look at porting one from a different resolution, as there are no recent QVGA ones. Why the Leo never had 3G video dialing is a mystery to me
Is it possible to add Video dialing to a 2G dialer Canvas?
Anyway, I hope someone can assist me to do this, or at the very least point me in the right direction.
Thanks
DT
that is very hard and i dont know how to make it... look at this OEM pkgs i get from LEO to QVGA maybe you can have an idea makin a diference hex edition
+ Que PPC said:
that is very hard and i dont know how to make it... look at this OEM pkgs i get from LEO to QVGA maybe you can have an idea makin a diference hex edition
Click to expand...
Click to collapse
Thanks + Que PPC - I have already ported the power/backlight from the Leo - editing the XMLs is good if the package has them.
I also understand what I am asking is not straight forward; otherwise anyone could be doing it. There are however, those in the XDA community that have the knowhow - I don't mind if the help comes via PM or email so that the inevitable thousand questions and comments aren't there - it is though, something I would like to be able to do, if not just for myself, but to also help the XDA community.
The people with QVGA devices would love to get updated components - the MEGA helped that immensely, but they are still crying out for a decent 3G dialler – I would be able to halve my ROM releases if nothing else with that. I for one want to be able to use a newer Ezinput – one that I can get working with the Nike’s hardware keypad. If that means pain stakingly editing every file in a package, then so be it.
Maybe it is as easy as editing a few XML files with the newer packages – I don’t know, if someone wants to help then I welcome the assistance. We all start somewhere and I wouldn't be able to even cook a ROM if 14months ago people in this community didn't lend their helping hand.
Thanks again, appreciate the input.
DT