Database Users

ExtROM Cab Files

Hi all,
I've had my S100 for a week now. It came with ROM ver 1.06 (I think) and right on the 1st day I upgraded to 1.11 and finally decided to apply Anansky's Big Storage ROM. All work perfectly even with my Jabra BT800. I've been trying many different 3rd party software. As usual, after installing and deinstalling, my unit became unstable and therefore would like to start from scratch.
In XDA's ftp site there is a Qtek 1.11 Ext ROM zip file. At first I installed all, but I think I could do away with some. Based on the filenames, some are self explanatory but I don't know which ones I can do without. Could someone be kind enough to explain?
Delete_vdisk_shortcut_WWE.sa.CAB What does this do?
Caller_ID_Magician_Generic_WWE_RC13.CAB Selft explanatory
SmartDialing_Magician_Generic_WWE_RC13.CAB I've read in other threads that some don't install this when using sw like MSVoice Commands.
PhonePad_Magician_Generic_WWE_RC12.CAB I think this contains T9 and what else? How can I edit this file to remove unwanted languages other stuff?
CAB-ArcsoftMMS-20022-Magician-Generic-ENU-08Mar05.cab I believe this is essential, right?
CV2.41.386_WWE.CAB No clue. Is it essential?
JMM101257_WWE_1004.CAB No clue. Is it essential?
BTHUSB_PATCH_AKU26.CAB Self explanatory
Version_WWE_111129.sa.CAB What is it for? Is it essential?

And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?

johnannie said:
And does anyone know of how to delete these .cabs? I hit soft reset before it autoloaded all of those above mentioned .cabs. IS it possible to delete them or at least make them non accessible?
Click to expand...
Click to collapse
If you have the Anansky ROM installed I don't think you will have the option to install the extended ROM when you do a hard reset, mine doesn't. You have to install the extended ROM seperately. You should have made a backup of your extended ROM before doing the Anansky hack. If you don't have it, maybe you can download it from the XDA ftp site. Remember only install .cab files, don't execute the autorun or you may wipe out your big storage. Even if you install all of the Ext. ROM files, they don't take up much space in the storage area (maybe 1.5 or 2 meg.) depending on your Ext. ROM.

Thanks for the responses but I would like some information from you experts on the following:
1. Which CAB files can I do away with and why?
2. How can I edit the PhonePad.CAB in order to remove unwanted languages? Any special software needed?
The Qtek 1.11 ExtROM found in this forum's FTP site has 9 CAB files. Some of them like the Caller ID is self explanatory, meaning this must definitely be installed if Caller ID is one of the functions one needs.

Unlock Extended ROM

I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank

fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!

Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank

Isn't "ROM" short for "read only memory"?

hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?

Total commander does not work with the jamin in my case anyway.
Tried several time with no results.

shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz

...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz

Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards

I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn

Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank

you can use wince cab manager to see the content of the cab file.

Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank

That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592

Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank

Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?

any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?

I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.

Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:

mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank

How to delete everything and install a clean version of WM5?

Hi,
I'm really tired of debranding my MDA pro after a hard-reset and I would like to do the following:
-delete everything on my device (use the extended rom unlocker to unlock)
- install a "fresh" WM5
- configure the system
- create a complete backup of the system like the Norton-Ghost in the pc-world
Is that possible, and if so, how?
Where can I get a clean version of WM5?
Has anyone of you already done so?
How can I create a complete backup of the system?
I know that are a lot of questions and I'm thankful for every hint
C ya,
Elias
Shame on T-Mobile for the annoying branding!!!

Re: How to delete everything and install a clean version of
eli_d said:
Where can I get a clean version of WM5?
Click to expand...
Click to collapse
I believe you can achieve this from the provided ROM itself by unlocking then deleting the ExtROM followed by a hard reset. You can then use other hacks from this site to delete or replace the splash screen and etc... to clean it up some more.

surely if you delete the extended rom and then do a hard reset the system wont work as youll be missing the majority of the installation, there are Cooked ROMS on the FTP site which people have created which I guess you can try at your own risk. I tried to remove all of the tmobile branding but found that they'd tied in some of crucial configuration after the branding process so when I soft booted before rebranding the XDA was only half complete... I too would like a good clean install without branding, unfortunatley I have to use the tmobile rom with its gay pink colours so that I can use their blackberry client.?

eli_d said:
...
- create a complete backup of the system like the Norton-Ghost in the pc-world
Click to expand...
Click to collapse
There are various programs out there that allow you to make a backup of your phone. Currently, I'm using BackupManager which generate an EXE files that you can save into your SD card such that you can restore your phone without having to reinstall the backupsoftware itself. I know that there are better software out there you can use. I think they call it phone clone or something, which uses your pc to store and clone the phone.
tonyb15re said:
... I tried to remove all of the tmobile branding but found that they'd tied in some of crucial configuration after the branding process so when I soft booted before rebranding the XDA was only half complete...
Click to expand...
Click to collapse
I have relatively the same problem, that my phone doesn't support MMS. However, if you were to extract the ext rom (by any means) to get the CAB files within, you can choose which to install or not. I think you pretty much need to guess what each of them means.

Thank you for your answers
I think I'm gonna try the backup-manager.
Now I wll start another post "Avoid T-mobile branding by install Jasjar or Dopod-ROM?"

Keep Softs after ROM Upgrade

Hi Guys,
I'm looking for a solution that can give me the possibility to upgrade my Polaris ROM without loosing all installed softs and parameters. Is it possible?
Thanks for your help.

lionelfryd said:
Hi Guys,
I'm looking for a solution that can give me the possibility to upgrade my Polaris ROM without loosing all installed softs and parameters. Is it possible?
Thanks for your help.
Click to expand...
Click to collapse
This topic is a perennial. There are many definite opinions on the wisdom of doing this, with some people absolutely sure that it simply won't work ...
BUT
1) make sure you have HardSPL installed 1st, before any cooked ROM upgrade
2) backup your Registry with a Registry program (eg PHM Registry). This is purely a last line of defence if you have to revert to the original ROM
3) backup to your micro-SDHC card with either Spb Backup 2.0.1 or Sprite 6.2.2. I use both for "belt and braces" security
4) flash cooked ROM of choice
5) use backup from 3) to restore over ROM upgrade. Mostly I have found the Sprite restore with Merge Level 1 + database restore to work OK, but the Spb restore with Overwrite files unchecked will probably work just as well
If in the end, none work properly, then just revert to your original ROM and use 3) backups for a full restore ... no harm done !!
I have done this many times on both a Polaris and an X500. Sometimes it doesn't work (eg. the earlier swtos and pdaviet Polaris ROM's) but I eventually found ROM upgrades for both devices that did work. Occasionally for the Polaris I found some Registry entries repeated - eg. \HKLM\Control Panel\MyCtrl - but these are easily deleted.
Be adventurous - you can easily revert if it stuffs up.

Schaps rom issue :S

i have a mda vario II , its at wm6 now, with a basic rom, i want to update it to the schaps rom, because the things i hear about are really good, i want to try it, 3 questions
1 do i lose my data, (sms data, contacts enz)
2 can something happen so my phone wont work anymore?
3 where can i download the newest dutch schaps rom
my english is not that good, im dutch....

oh yea, another question, do you get your garantee if you send it back to tmobile?

1. yes
2. possible - install hard SPL V7 1st to reduce risk.
3. Do a search to find if its available.
No, you need to put the Stock rom and SPL back on.

thanks for your answers, but can i make a backup with spb backup for example?
and do my programs on the sd micro card still work?

Yes, just don't format the card. Leave it as is and everything should install as it was before. I know SPB backup has 5 trial backup/restores so you may be able to try it without purchase (I have a licenced copy so I don't know if any limitations have been imposed other than the 5 trial backups).
Cheers...
Not to discourage you at all but schapps roms are fairly old now, if you look in the WM06 part of the Hermes forum you'll find some newer roms. Read the description to find out if you like it, then the last few pages to see any problems with and fixes available.

i have schaps installed now, its really great, but it can be done better in my opinion, which custom rom do you recommend me?

I use PDAViet V27 at the moment but also like PDACorner. Roms are a personal choice though, depends what you want it for, how much extra stuff you want in it and how fast you want it to run.
The I said are WM6.1. They are pretty good for me but depending on the 3rd party apps, I found, can become unstable when the apps are installed together.
I use SPBbackup 2.0.1 so if something does go wrong I can re-install a lot of stuff without a great deal of time being spent.
Cheers...

i use spb backup too, but now my programs that i first installed arent in my programs tab, and on my phone by programmabestanden (dutch for programfiles) i can start it tough

If the apps are in you programs filke on the sd card, use Resco explorer or total commander to create shortcuts of the .exe in the windows directory. windows>start menu>programs. Then they'll appear in the programs director of your phone.
For Resco it says "startmenu as shortcut", I have to move the shortcut manually to the programs directory or soft reset will do the trick too.
Cheers...

thankzz