Hi Guys! Need some help with my alarm on my HTC Trinity running WM6 which is playing up!
It seems that when the device is in sleep mode, the alarm does not kick in! If then I switch it on (or something triggers it to go on like an incoming call) it works!
I dont think i installed anything that could have effected this unless possibly set the "device lock" on the today screen!
I also noticed that the device needs two or three presses on the Power On button before it actually comes to life which might be related to the issue!
Any ideas?
As regards build, not sure exactly although ->Settings -> About shows me on WM6 Professional and boot up with the pdaviet logo! I have HTC 3-tab installed.
tks
jay
I had a similar issue after activesync got confused with the devices partnership. After running pmClean once I have never had it again. Worth a try
Hi!
I must admit that i was not convinced with your solution but it seems to have done the trick!
Seems to have also resolved my power on/off issue.
thanks
j.
False Alarm !!! Same thing happened this morning and alarm didnt kick in!
Any other ideas?
J.
same here any help?
Related
Hi guys, I'm new to the forum so please forgive me for any mistakes. I searched the forum but I could not find any related topic so I decided to post a new thread. Anyways, my tytn is new (2 weeks old) and sometimes hangs when going to stand by mode. I tried to dissable the "turn off devise if not used for.." option and turn it off (stand by) manualy by sigle pressing the power button. But guess what nothing happented!! I could not turn it on and I had to do a reset again. It is so annoying, I am missing calls, sms etc because my device hangs and stays off! Anyone experiencing the same problem? Is because the ROM version? (My ROM version is 1.18.255.3). How can I fix this problem? Thnx
I have occasionally experienced this problem and have tracked it down as a fault that only occurs when I have the wifi connection activated. I keep the wifi off unless in use the problem disapears. Hope this helps
wifi is off at all times. Actually I've never used wifi with tytn
Are you running Today plugins from memory card? One of the reasons Tytn hanging is related to that. Put these plugins into main memory until a future ROM is correcting this problem. Good luck!
I have also had this problem. Activesync was the culprit. I make sure I always close AS after syncing instead of minimising. In addition I delete the event that starts activesync (repllog.exe) in my notification queue. No freezes while on standby for almost a week now
I made a thread about it here : http://forum.xda-developers.com/showthread.php?t=278968
thx guys! I'll try and reply back
Seems to me cdyat was right. Thanks for the tip!
* puts on noob protection *
Whenever I turn my device on, it goes back to the today screen and for the life of me cannot find any option to disable this!
I'm using LVSWs WM6 ROM.
RAH! Driving me nuts.
Thanks.
Same
I have the same problem with my PC. Every time I boot it up it goes to the desktop!
Can't work out how to stop it.
esseff said:
I have the same problem with my PC. Every time I boot it up it goes to the desktop!
Can't work out how to stop it.
Click to expand...
Click to collapse
Good to know I'm not the only one. I don't think it always did this either.
Do you have HTweakC installed?
ok I am a little lost here if you put your device in standby it will awake to what ever screen was there before it went to sleep. If you power your phone off completely it HAS to start at the today screen thats just how it boots up... try using the ROM i have posted in the forum in my SIG since i have no issues with it.
austinsnyc said:
ok I am a little lost here if you put your device in standby it will awake to what ever screen was there before it went to sleep. If you power your phone off completely it HAS to start at the today screen thats just how it boots up... try using the ROM i have posted in the forum in my SIG since i have no issues with it.
Click to expand...
Click to collapse
Lol. yours is actually the ROM I'm using.
j0dan said:
* puts on noob protection *
Whenever I turn my device on, it goes back to the today screen and for the life of me cannot find any option to disable this!
I'm using LVSWs WM6 ROM.
RAH! Driving me nuts.
Thanks.
Click to expand...
Click to collapse
I'm not sure that we are understanding your question properly. I can see some of those replying above are puzzled as well.
As Austinsync says above if you turn on after normal sleep mode you return to the screen you were on before. If you fully powered off (not something you should be doing in regular use) then it will go to the today screen.
So, when you start up your device what screen do you expect to see if it's not the today screen?
Mike
I believe I undestand the OP because I have the same problem. No matter what you have loaded, after going into standby the phone returns to the Today screen. The original active app is still loaded, but not in the foreground.
I have tracked the problem down to either pocketbreeze or Handyswitcher. I'll test more when I return from the business trip I am currently on.
Regards,
Marcelo
mfabre said:
I believe I undestand the OP because I have the same problem. No matter what you have loaded, after going into standby the phone returns to the Today screen. The original active app is still loaded, but not in the foreground.
I have tracked the problem down to either pocketbreeze or Handyswitcher. I'll test more when I return from the business trip I am currently on.
Regards,
Marcelo
Click to expand...
Click to collapse
Hmm.. I'm not using either of those programs. As for software running, I'm using HTC X-Button, phonealarm and spb tools.
I just flashed a different ROM. Older LVSW modified by austinsync this time. Same problem!
I just flashed the LVSW by Sleuth255 and it doesn't do this!
It seems to have been a problem with all of austinsync's ROMs. Phone starts up MUCH quicker now too!
EDIT: I just remembered that the customizations from EXTROM didn't run with Sleuth255's ROM. Could be part of it.
I have the same problem with Schap's Rom (3.57). Anyone else?
My .02.
I recently hard-reset my Schap's 3.57 ROM and have installed minimal software that interact with the Today screen. Before hard-resetting the device, my system would also go to the Today screen whenever my device came out of standby. After the hard-reset, it no longer goes to the Today screen until after the timeout period defined in the Today Settings.
Before Hard-Reset on Today Screen:
Office Communicator
Windows Live Search
Activesync Exchange Server Direct Push
Palm Messaging
After Hard-Reset on Today Screen:
Palm Messaging
No Data Connection or Direct Push
Hope this helps.
Murad
-----------------------------------
Running Schap's 3.57 ROM, not the Official HTC WM6 ROM (as in my signature)
I really don't have this problem!
OS see my signature
I just had to hard-reset (Schap's 3.54b), and the device still goes to today screen. Gaaaahhhh!!!
This is also being discussed here.
mikechannon suggested this might only happen when you're using device lock? My exchange admin requires it - I have a device lock and I also use Zenyee Stayunlock to allow me to adjust my settings...
i have liberated my shift successfully.
i used the alarm on the snapvue side once. after that i have deactivated the alarm again.
but for some reason the alarm comes up every day, even the alarm is switched of in settings (snapvue) and settings (windows mobile).
anybody has a clue what could be the problem?
is there a registry setting i can change to disable the alarm?
gr8 said:
i have liberated my shift successfully.
i used the alarm on the snapvue side once. after that i have deactivated the alarm again.
but for some reason the alarm comes up every day, even the alarm is switched of in settings (snapvue) and settings (windows mobile).
anybody has a clue what could be the problem?
is there a registry setting i can change to disable the alarm?
Click to expand...
Click to collapse
Had the same problem.
Solved it by playing with all the three alarms somewhat. I think I switched them off and on.
Maybe i changed the times.
Sorry that I cannot remember what I did but it is solved now.will, of course never use it again.
It was the very first time I used it. Maybe that was the reason.
Huib
this happened to me while using only snapvue, no liberation pack no nothing. I fixed it only by a hard reset.
I had the problem too, with unmodified Snapvue. It was the first time that I had used an alarm. I remember Shagcontrol Snapvue reset not fixing it. But I think a Snapvue settings reset fixed it.
I haven't used alarms again so I don't know if it will be a problem again.
Had this problem on my Prophet.
Go to HKLM\Software\Microsoft\Clock\, You will see keys 0,1,2 - these are the three alarms you can set - delete the one that's causing you problems. If you don't know which one then delete all three. The alarms will be reset.
ehm, i've put the alarm to ring at 8 am during workdays to remind me to wake up and go to work. The alarm was working fine and I got to work in time, daily. But... last saturday I was free. And I was sleeping at 8 am. Damn thing begun to ring and make noise. That's a huge bug man, I woke up at 8 am and had a awfull long day.
Poss solution
This sort of thing used to happen with WM2003 on my XDA Orbit. I used an app called Wakeuptweak which solved the issues with the alarms. The sdame thing is happening to me with the Shift so I am going to give it a go and see if it helps. Will let you know the result.
Correction - it was on my XDA2 not Orbit. Silly me!
facdemol said:
ehm, i've put the alarm to ring at 8 am during workdays to remind me to wake up and go to work. The alarm was working fine and I got to work in time, daily. But... last saturday I was free. And I was sleeping at 8 am. Damn thing begun to ring and make noise. That's a huge bug man, I woke up at 8 am and had a awfull long day.
Click to expand...
Click to collapse
i do not want this happen to me....
First of all sorry for opening a new thread.....did search but didn´t find anything.....and I usually get annoyed myself by people asking question that have already been answered....
Problem: once in a while - and in no understandable pattern - my HD does not switch to standby after the set timeout (60s for me). Soft-reset does not solve the issue, but it disappears after a while (several times turning the display on/off). Have not changed/installed anything recently. First blamed it on S2U2.....uninstalled and problem seemed to be solved, but only until today - now it´s back in all its glory....
Already compared the - what I think - relevant registry values to my Diamond registry....no suspects there.
And no, there is no video-, audio-, or navigation program running in the background, as the problem manifests itself right after a restart/soft-reset....
Any ideas?
Thanks!!
mine does the same...I've just gotten used to it.
twisted-pixel said:
mine does the same...I've just gotten used to it.
Click to expand...
Click to collapse
Hmmm....I don´t want to get used to it, because whenever the device wakes up (missed call, reminder, alert etc.) the display stays on (altough dimmed) using up battery power....
Same problem here with my Diamond.
Any news or ideas on this?
Same for me, and it's a very big problem!
I've read in some of the other posts that it may have to do with the activation of auto-screen lock that is included in the ROM, but this isn't turnd on in my case!
I use my Blackstone professionally, which means I need as much battery power as possible on one charge! At the moment this problem makes the device last for about half a day during work!
If anyone has a fix, I would appreciate hearing about it
Brand new HTC HD2, No software or any tweakings, nothing.
Alarm set to wake me up this morning.
Woke up an hour later, phone was on, alarm screen was on display with the machine freezed, had to soft reset. What the hell is that? This is a brand new nothing installed device. A simple thing as an alarm clock freezes the device?
Anyone experiences same problem?
I had the same problem, but with galarm.I never thought this can happen with the original software.It should be bugs free...
I get a similar problem sometimes with GAlarm. Luckily for me, it sets the alarm off then freezes up. That gets you out of bed believe me
The screen is on, with the time displayed and what looks like one of the balls from the maze/snooze function in the very top right hand corner. You can't do anything to get rid of the screen. I had to press the Home hard key then end task GAlarm to get it to stop. So it's not totally frozen up but GAlarm is fubard
chimpsinties said:
I get a similar problem sometimes with GAlarm. Luckily for me, it sets the alarm off then freezes up. That gets you out of bed believe me
Click to expand...
Click to collapse
Maybe a new function from g-alarm .
I don't have the problems you (all) are having, even with g-alarm. It's working like a charm on my HD2 orignal WWE 1.66 rom.
You guys/girls got all patches etc installed?
What kind of patches?
Doesn't 1.66 come with them already in?
I'm using BsBTweaks 1.6.
I think mine might be a setting within GAlarm. I quite often get an error while setting up alarms, usually either when adding tracks or when I get right to the end and save it. But it is there and set up when I next go in. I'm using GAlarm 2.3.
Never had this problem with my HD2. However it happened often with my HTC Touch Diamond. Maybe it has something to do with a specific device, dunno. Anyway just in case I have one alarm set on my iPod Touch so there's always at least one device that will wake me up. Maybe you should hard reset your phone or smth... Did you tweak your soft in some way? Edited the registry?
just this morning, fir the first time, the alarm clock didn't trigger. Had it set for 8:40, all days of the week active, obviously alarm was active, vibration was off.
I had a gut feeling that it MAY not work, so I setup the other phone at 9am just in case... as expected, the other phone woke me up, the hd2 didn't... but no freezes nor anything, simply no alarm sounded...
same for me. hd2. it has to do with
1. the windows lock screen
2. galarm
3. backlight/device timeout settings while locked
BOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO.
nothing like a frozen device MID alarm forcing you to pull the battery, and restart, etc
I have the same problem. But i will try something i found. Since the problem occurs occasionally I cannot reproduce the error and post a result. Maybe you can try and share the results too.
There's an option in G-Alarm settings that says "Turn backlight off during an alarm after x seconds". I will disable this feature.
I'm also using S2U2. This feature may interfere with S2U2.
Cheers
Well I am not using G alarm or any other app. Its just plain WM 6.5 alarm. I have tried it on 4 different ROM(stock) and other and I get same result.
If I don't reset my phone before going to bed at night, I will get this issue in the morning that my phone will be frozen during the alarm.
Any advice?
Try these, it should help freezing problems with htc hd2 and galarm
allthese settings are in galarm settings option
1)Disable "turn backlight off during snooze"
2) Disable "turn backlight off during an alarm after x secomds"
3)Disable "show flightmode function"
4) Disable "unlock the device"
I also have the same problem, sometimes the WM alarm fails to sound the alarm, the phone says that it has gone off, but no alarm sounds.
Have done some research, and it sounds like a fault with WM, the phone "wakes" its self at ~03:00 for 30seconds to schedule all its tasks for the day, BUT if it takes too long scheduling other tasks, it cant do the alarm call due to running out of time.