Database Users

Wizard wifi bug - shows all networks as available

I found a bug in tmobile rom 1.6.2.4 and qtek ROM 1.6.7.1. When access points are out of range they still show up as available. The network "Free WiFi - Be nice!" is NOT in range, yet it continues to appear in the list. Even after a few minutes.
This prevents my software - WiFiFoFum from working properly. Could someone please confirm they also have this problem so I can rule out that its my hardware.
TIA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yes mine does that as well. it also tries to connect to out of range networks, it cycles through them and for some reason it attempts to connect to the "in range" network last.

I think it trying to connect to unavailable ones is normal. This is so it can still connect to a network which is in range but not broadcasting it's SSID. Some people turn off broadcasting the SSID on their wireless routers to prevent others from discovering it.
However displaying networks not in range as available is NOT normal!!! This means that nobody with a Wizard can war drive :-(

I'm pretty sure that I've seen exactly this behaviour on every HTC device I've owned, i.e. it sits there stating that it's connected to my home network despite me being 200 miles away.

The WZC list has always been a bit screwy thats not an HTC problem its MS's. Like the first time you open the dialog it might take a few secs to show real information. However this bug is different because it continues to show APs as available. Only way to clear the available list is to power cycle wifi (or power cycle device which does the same).

I'm not convinced that this bug (if it is one) effects war driving....
Indie, using beta's of your latest app all ap's located at the start of a scanning run are located correctly.....It's after a few miles I start to have problems, and the problems I have are ap's located BEFORE I actually reach them....perhaps the wizards wifi drivers are telepathic

I've been using the Wizard for War Walking for a month now with Wififofum. If it hits 32 Ap's connected Wififofum crashes. The only way to clear out the list of AP's to start Wififofum with the wifi off, then close Wififofum. Restarting with the wifi on will make it behave normally.
In practice I switch the wifi on and off to disconnect AP's. This is often every 20-30meters in central london. Some places there are so many AP's that simply starting Wififofum cause it to crash. The Wizard can't handle crashes so a reset is required - up to 90 seconds. Sometimes within a few minutes of the last crash.
I've collected 5000 AP's so far but quite frankly, I'm somewhat pi**ed off with it.
I tried posting this on the Wififofum forumebut their email confirm registration process failed and I've run out of email addresses to register with. I also emailed them twice as I assumed it was Wififofum bug.

Sounds like 32 is the maximum number of APs that can be in the drivers internal access point list. Then perhaps when it sees the 33rd it crashes because it tries to add it off the end of the array? Hmm I didn't receive your emails about this bug. If you give me the username you signed up with I can activate your account. We need someone like you on our forum

I just tested the I-mate 1.1.9.3 ROM and it also has the problem. I was hoping to find a ROM that doesnt have the problem so we could take the wifi driver from it and install it via wififofum however it doesnt look likely we'll find one.

peterweg said:
The Wizard can't handle crashes so a reset is required
Click to expand...
Click to collapse
Usually if a program crashes most of the device becomes unresponsive, including the today screen if you manage to get to it with the hangup button. But most of the time the Start menu still responds. From there you still manage to go to Parameters, System, Memory, Running programs and kill the unresponsive app.
Works 90% of the time, this already saved me quite a lot of resets, like when I stupidly run VisualGPSce forgetting to turn on Bluetooth. This Stupid app freezes all the device until it manages to open the COM port, which obviously never happens...

Just to confirm that with the lastest beta of wififofum my QTEK 9100:
Rom verson:1.1.9.3
Rom Date: 9/16/05
Radio version:01.01.10
Protocol ver :4.0.13.16
ExtRom: 1.1.9.106
works just fine, no problems at all with war driving.

Drewy, run wififofum and let it detect your home access point or wireless router if you have one. Then power off the access point or router. Then watch wififofum continue to show the wireless network as in range. Examine the LastSeen column.
The reason you might think wififofum is ok as wififofum actually only updates the coordinates of a network if the signal gets stronger - that is for teh file it makes when you do File->save. However if you use autolog mode then it wont work correctly it will produce a file with every AP at every coordinate, after the AP has been found.

OK I concur.
Once it's detected 32 ap's that's your lot!
Is there perhaps a way around this (within wifofofum) , just a few quick ideas:
1, programatically remove ap's from the list when signal starts to decrease.
2, up the limit to something bigger than 32, if this figure is not hard coded.
3, flip the wifi radio off then back on once the list hits 30 or something...
Only idea's have no idea of the advantages/disadvantages of any at this stage, anyone think any of these (or others) are worth pursuing?

I dont think its possible to clear out the driver's list. Since when you get the list from the driver it gives you a copy.
THe power off on thing would work to prevent it reaching the 32 limit, however it doesnt help the problem that APs are still seen as available when they arnt.
We can hope there will be a new wifi driver in the new ROM. And then we can extract it and I can include it in WiFiFoFum and allow people to use the fixed driver on any ROM version. Is there a way to issue a bug report to HTC?

are we sure that it is a bug and not normal operation of mobile 5.0? has anyone been able to try any other mobile 5.0 devices ?

my dopod 838 does this as well... it cycles thru all networks [shows unavailable as available kinda misleading...]

I have the same problem with Universal (Qtek 9000) also :?
I thinks it's better I post in Universal forum

indiekiduk
I've PM's you.

new ROM 2.8.7.102 still has the problem
The new ROM with push email - Qtek version 2.8.7.102 still suffers the same bug :-(
http://forum.xda-developers.com/viewtopic.php?t=40458&postdays=0&postorder=asc&start=0

Great news! This bug has been fixed in the new i-mate ROM
http://forum.xda-developers.com/viewtopic.php?t=42663&highlight=

When connected to WIFI network, TyTN tries to launch a 3G/GPRS connection instead of

I've read the FAQ and see that this has already been answered but I just don't understand it. From what I can tell, my settings are as described and yet I still have this problem. Also, the second part of the answer in the FAQ says to go to settings - connections - network card, I don't see network card.
Please help. This is very annoying.

carsmovies said:
I've read the FAQ and see that this has already been answered but I just don't understand it. From what I can tell, my settings are as described and yet I still have this problem. Also, the second part of the answer in the FAQ says to go to settings - connections - network card, I don't see network card.
Please help. This is very annoying.
Click to expand...
Click to collapse
On the network cards point -
Start>settings>connections Do not go to the next connections icon but look for PDA picture icon Network Cards.
Mike

mikechannon said:
On the network cards point -
Start>settings>connections Do not go to the next connections icon but look for PDA picture icon Network Cards.
Mike
Click to expand...
Click to collapse
This is what I see when I go to settings-connections:
My ISP
add a new modem connection
manage existing connections
My Work Network
Add a new modem connection
Add a new VPN server connection
Set up my proxy server

carsmovies said:
This is what I see when I go to settings-connections:
My ISP
add a new modem connection
manage existing connections
My Work Network
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
Click to expand...
Click to collapse
That's because you have gone one connections click too far! See my above post and do not tap on the second connections icon.
Post back here if you still can't find it.
Cheers
Mike

This is the screen you want - see the second connections link AND the Network Cards icon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cheers
Mike

Sorry my bad. Found it but as mentioned before, all my settings are as suggested. I've now taken my sim out and connected to wifi. When I open a internet site I get a popup window saying:
Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again.
Obviously since it doesn't have any GPRS connection at all it can't even try to connect to GPRS while connected to Wifi.
I've even upgraded my ROM thinking that might be the problem but it didn't help.
I don't remember having this issue when I previously had a Tytn.
I should add though that i am able to surf using the wifi but it's still very annoying that these pop-up windows keep coming up.

I'm pretty green here, but was having the same issue that you were having - a big concern because my company hadn't coughed up the $$ for a data plan as yet and so I would have to pay for all the charges.
After spending an eternity on hold I got to speak with someone, cut thru a bunch of crap by saying "yes, I've soft reset and even hard reset the device...". She then had me check a setting, then told me to remove the battery with the device powered up. I figured it was one of those stupid things on a checklist, but it actually fixed my problem completely!

pkley said:
I'm pretty green here, but was having the same issue that you were having - a big concern because my company hadn't coughed up the $$ for a data plan as yet and so I would have to pay for all the charges.
After spending an eternity on hold I got to speak with someone, cut thru a bunch of crap by saying "yes, I've soft reset and even hard reset the device...". She then had me check a setting, then told me to remove the battery with the device powered up. I figured it was one of those stupid things on a checklist, but it actually fixed my problem completely!
Click to expand...
Click to collapse
I just tried that and at first it seemed to solve the problem but that was cause it wasn't truely connected to wifi at all but just GPRS. I disconnected wifi and reconnected it and the problem was still there.

same problem
I am having the same problem... when i go to settings>connections i dont have a network cards icon at all. what is wrong and how do i correct this

You are using Direct Push I assume ?
If yes, it because direct push always use GPRS/UMTS (not wifi)

adebilloez said:
If yes, it because direct push always use GPRS/UMTS (not wifi)
Click to expand...
Click to collapse
Yes. So since I am it constantly tries to stay connected I assume?
Is there any solution to this?

I experienced this behaviour before, too. A hard reset solved it then and it never occurred again.
Another issue is, that you can't make Hermes changing profiles automatically when it's connected via Wifi.
I've configured a proxy server in my a connection profile, since my WAP-flatrate with O2 Germany will apply only for connections via that proxy (btw it works for regular websites, too). That proxy of course is unreachable from outside O2's network, so when I'm using Wifi I always need to change my preferred profile, so the proxy settings won't apply.
And now guess what happens when I forget to switch back to the proxy profile and then get on the web through 3G! €€€!!!
In terms of connectivity Windows Mobile is crap! And I fear they won't fix it for us Hermes users, but force us to buy some WM6 device.

I sometimes have this problem, and have found a 'temporary' solution.
I connect to the wifi, and then, without doing anything else, immediately disconnect. Then connect again, and it seems to work. Not sure why. Maybe it will work for you.

marisa4755 said:
I sometimes have this problem, and have found a 'temporary' solution.
I connect to the wifi, and then, without doing anything else, immediately disconnect. Then connect again, and it seems to work. Not sure why. Maybe it will work for you.
Click to expand...
Click to collapse
Hi
I'm Jake from Italy, I used to have the same problem, without knowing I used same Marisa procedure and it works!
Jake

I too had this problem and my fix was to - turn off phone connection - turn on phone connection - turn on WiFi.
Only had to do this once and has been working ever since. Of course you have to have the other settings as recommended earlier here.

Wifi network cards in xda stealth!!!!

what network cards are supported in xda stealth.....???ie if you go to settings> coonections> network cards and then which one you choose to connect to wifi????

alright man,if you have a wireless network available to you then you have to choose that network.If it has password enter that password and you will be right.

mightyblues92 said:
alright man,if you have a wireless network available to you then you have to choose that network.If it has password enter that password and you will be right.
Click to expand...
Click to collapse
thanks alot ....i have a network but the wifi never connects because itis always off and there is no buton to turn it on ....i beleive this happened after aprevious upgrade and may be in the registry but iam afraid to touch the registry now but eventually i may need to:

My phone in Wireless Manager not have wifi button to turn on wifi. Every body, please help.

I select this network adapter from the list:
‘tiacxwln Compatible Wireless Ethernet’
Andy

underwurlde said:
I select this network adapter from the list:
‘tiacxwln Compatible Wireless Ethernet’
Andy
Click to expand...
Click to collapse
I don't know it mean??? Please help

Can ANYBODY tell us what is the right setting for the wifi in the registry in xda stealth ???? and can changing to the right setting repair the lost on/off key in my wifi ????

soft reset...
usually the Wifi Dispears after you connected to ActiveSyc(or Mobile Device Center) becouse on default ActiveSyc disconnects any data connections on the device(including disabling Wifi card) and therefore it does not show up.
when i was still on wm5, most of the time the wifi button did not come back up. i would usually have to play with the ui somehow to get it back but it should come up with a soft reset.

lifecheater said:
usually the Wifi Dispears after you connected to ActiveSyc(or Mobile Device Center) becouse on default ActiveSyc disconnects any data connections on the device(including disabling Wifi card) and therefore it does not show up.
when i was still on wm5, most of the time the wifi button did not come back up. i would usually have to play with the ui somehow to get it back but it should come up with a soft reset.
Click to expand...
Click to collapse
Sir, i was soft reset - hard reset and uprom but not fix...

well, if it still does not show at all(including fidling with everything you can, and doing everything and anything) then there definatly something wrong and you should send it to repair centers. it could be a wifi chip problem but i really dont know.
you could also try an unnofficial WM6.1 on the device and see if that works...

lifecheater said:
well, if it still does not show at all(including fidling with everything you can, and doing everything and anything) then there definatly something wrong and you should send it to repair centers. it could be a wifi chip problem but i really dont know.
you could also try an unnofficial WM6.1 on the device and see if that works...
Click to expand...
Click to collapse
DIDNOT WORK TOO.....

end of the road
abdelrahim said:
DIDNOT WORK TOO.....
Click to expand...
Click to collapse
well if the solution i gave you does not work and unnoficial ROM did not work, then it should be sent back to repairs.

lifecheater said:
well, if it still does not show at all(including fidling with everything you can, and doing everything and anything) then there definatly something wrong and you should send it to repair centers. it could be a wifi chip problem but i really dont know.
you could also try an unnofficial WM6.1 on the device and see if that works...
Click to expand...
Click to collapse
i have the problem with the Wifi turning on -off from a previous Rom upgrade and this was not fixed by installing wm6 from yuc........in MY STEALTH Wifi utility the wifi is off....and in IP info it says DHCP ENABLED > FALSE...I have tried installing new wifi rgistry , tried soft and hard reset but the wifi is DEAD.....Finally I GAVE UP ......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

tried to import some screen shots but failed

try older version
abdelrahim said:
i have the problem with the Wifi turning on -off from a previous Rom upgrade and this was not fixed by installing wm6 from yuc........in MY STEALTH Wifi utility the wifi is off....and in IP info it says DHCP ENABLED > FALSE...I have tried installing new wifi rgistry , tried soft and hard reset but the wifi is DEAD.....Finally I GAVE UP ......
Click to expand...
Click to collapse
other people are also experiencing problems with the reg fix.
you could try an older version(beta1.2-im still using that version and wifi works strong, like it should).

lifecheater said:
other people are also experiencing problems with the reg fix.
you could try an older version(beta1.2-im still using that version and wifi works strong, like it should).
Click to expand...
Click to collapse
I have already tried beta1.1 and 1.2 .....they COULDNOT FIX Wifi problem which has been there after a previous Rom upgrade......thank GOD the bluetooth still works .....

]

after downgrading to wm5 from MWG site the Wifi key is back after almost 2 months !!!! but the key is frozen.... pressing turn on wifi doesnot turn it on !!! ANY SUUGESTIONS TO SOLVE THIS PROBLEM???

I have noticed that I dont have wifi-init.ink in widows startup folder..... where and how can I find that ????

WIFI connection problem Samsung i780 help

helo, i got WIFI connection to my home wifi, and some other free ones without a problem.
the phone wifi is connected, however, no data seems to be able to download - i.e. cannot surf the net, cannot check email nothing zilch.
what's going on?? anyone has this problem with their samsung i780?
thx

the WIFI version is IEEE 802.11 b/g
s/w 1.0.0.0
h/w 1.0
it connects to any FREE WIFI, but doesnt surf or cannot download any pages.
also i'm running realvga on 96

can anyone assist please??
PROBLEM WITH WIFI Surfing...
Phone's ROM Version and WIFI version:
PDA: i780 DXHC4
PHONE: i780 DXHC4
wifi: s/w: 1.0.0.0
h/w: 1.0
the problem I HAVE is that WIFI CONNECTS OKAY and DETECTS NETWORK OKAY, however, I CANNOT surf and/or download any DATA using Internet Explorer. It SOMETIMES download, but VERY VERY SLOW.
Can I get some help please????
I tried another phone HTC Touch with WIFI, and no problems at all.

I have exactly the same problem...
I just bought the phone, and i had the surfing working through wlan once, but now it doesnt work. Wifi connection is ok, i can also ping the device from the wireless-side.
tried to manually enter dns address, no help.

I also had this problem, but after installation of realVGA and SPBbackup, it somehow works again. I am keeping my fingers crossed though, because I don't know for how long this will keep working. Hopefully I wont have this problem again.
The problem started after only a couple of days use. I had made use of wifi with no problems, surfing the net. After trying some connections via poor access points, I could still connect to my home network, but I could not open any internetpage (in IE and in opera).
You could try installing realVGA and SPBBackup like I did, but I'm not sure that this was really the solution to the problem. I didn't try anything else as far as know.

i got it to work now. i made some changes to network settings that should only be related to gprs or wap. change to my internet instead of my wap.
or dont touch anything if it works

still no luck

I had same problem. Cannot connet to internet at home but it was ok at work. It didnt worked with firmware C1. I had some problems with E1 too but somehow it works now. What WiFi router do you have?

Im having the exact same problem and ive tried fiddling with the connection settings also, but no luck so far. :-(
I wanted to try that realVGA thing, however it says that it might mess up the phone if used with other than eng language, so ill pass on that one for now..
I might have found the solution, ill be back with the details if it keeps working. :-D
So i shot these pics of everything network related i could find in my phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope this will be useful even though its in Danish, but the basic stuff like "Network Adapter" etc is almost the same in Danish (Netværkskort) so it shd be possible to figure out which is what.
Cheers!

wifi connection ss i780
i got a similar problem with ss i780 but am trying the solution i have read..thanks will let yu know if it works

same here with me.. using LGKS20.. cannot surf the website but still can connects the wifi..

For i780 Wifi...If network connected successfully and still you are not able to surf, then it might posible the your you had select "Work" to Network Adaptor connects.. Please goto wifi menu=>Network Adapter =>select Internet
if problem not solved then it might be with wifi router. i.e. it may uses proxy.
Following proxy works for many gateways and it also works for me.
You can set proxy by clicking Samsung Wifi adapter..=>Use Specific IP Address=>
IP => 192.168.1.(1 to 249)
Subnet mask => 255.255.255.0
Default Gateway => 192.168.1.1
Please let me know what happened
-Pratap

[Q] ipaq 614c wifi problem

Hi,
I'm new to the thread and need help. My ipaq 614c's wifi keeps saying "unavailible" when switched on. When I create an ad-hoc connection my other devices sees it and can connect to it. The blue led flashes, but it doesn't pickup any networks at all. I have tried all availible channels on my wifi router with 802.11b and g settings sepretely. It has been working for a few hours when i got it. I'm on radio firmware 0.88, os 1.01.04 and run win mobile 6 pro. I tried radio firmware 0.89 a few times and win mobile 6.1, but my problem was'nt solved.
Please help?

Make backup, install this wifi fix, restart device. One time it helps me with weak wifi

ipaq614c
Hi,
Thank you for the reply, and the file, but unfortunately it didn't work. I installed and restarted the device, but it still says "unavailible" when wifi is switched on.
Any ideas?

hm, is you wifi router correctly set up? Does your notebook connect to this router?

ipaq614c
My router is setup correctly, my other devices see my wireless router when I search for it,and connect to it. My router has wifi channels 1-13, and I tried all of them in g and b mode, with and without security, the device doesn't see it, or any other connection. when I make an ad-hoc connection, my other device sees the connection, and it can connect to yhe ipaq.
I do not know what else to try?

ipaq 614c wifi problem
I have contacted HP and they adviced me to hand in my HP for repairs.

i have too
raidmax said:
I have contacted HP and they adviced me to hand in my HP for repairs.
Click to expand...
Click to collapse
i have the same problem
how to fix it

I cannt Connect to wifi, the status wifi only " Available ", not "connected"
i use WWE 21501 4.01, and go back flash to 3.04,its also not help my hp 612c
anyone have the same problem with me,
how to fix my hp 612c

raidmax said:
Hi,
I'm new to the thread and need help. My ipaq 614c's wifi keeps saying "unavailible" when switched on. When I create an ad-hoc connection my other devices sees it and can connect to it. The blue led flashes, but it doesn't pickup any networks at all. I have tried all availible channels on my wifi router with 802.11b and g settings sepretely. It has been working for a few hours when i got it. I'm on radio firmware 0.88, os 1.01.04 and run win mobile 6 pro. I tried radio firmware 0.89 a few times and win mobile 6.1, but my problem was'nt solved.
Please help?
Click to expand...
Click to collapse
lynggo said:
I cannt Connect to wifi, the status wifi only " Available ", not "connected"
i use WWE 21501 4.01, and go back flash to 3.04,its also not help my hp 612c
anyone have the same problem with me,
how to fix my hp 612c
Click to expand...
Click to collapse
Hi,
I don't have any problem running WiFi here. I connect to my home network as well as to the network at work ...
Is it happening when connected to AS ? If so, did you check wether in AS the checkbox 'Allow wireless when connected' is active ?
Dirk

dirlan2001 said:
Hi,
I don't have any problem running WiFi here. I connect to my home network as well as to the network at work ...
Is it happening when connected to AS ? If so, did you check wether in AS the checkbox 'Allow wireless when connected' is active ?
Dirk
Click to expand...
Click to collapse
where that option "Allow wireless when connected' ? can you show me...
or can you show that the regedit.?

lynggo said:
where that option "Allow wireless when connected' ? can you show me...
or can you show that the regedit.?
Click to expand...
Click to collapse
Hi,
It's in Active Sync on your PC. Just open the applet and go to Connections.
Dirk

maybe my wifi module had broken.
no solution

lynggo said:
maybe my wifi module had broken.
no solution
Click to expand...
Click to collapse
Hi,
Check if in your Start | Settings | Connections | WiFi | Network Adaptors | Marvell SDIO8686 Wireless Card is configured and has a IP address (even greyed out, but it has to have an IP)...
If so, the WiFi is working but badly configured. And the I guess you're in for a reflash.
Dirk

dirlan2001 said:
Hi,
Check if in your Start | Settings | Connections | WiFi | Network Adaptors | Marvell SDIO8686 Wireless Card is configured and has a IP address (even greyed out, but it has to have an IP)...
If so, the WiFi is working but badly configured. And the I guess you're in for a reflash.
Dirk
Click to expand...
Click to collapse
I have been reflash and reflash again with the other ROM WM 6.1 or 6.5, and i have checked the card configure and Network Adaptors have an IP that i configure with manual and a wifiprofile software cab.
but it can't solve my HP Problem wifi

you would be best contact hp if you think your hardware has issue =)

i have the same problem with you,and try all things.
but,my hp612c had work correctly for several days after I useing a soft that is wmwifirouter overnight with charging.
afterward i open the GPS about halt day ,my hp612c dont work again.
and I cant repairt it still NOW.
------------------
so you can try repair the wifi config with the wmwifirouter,and open the wifi overnight .

raidmax said:
Hi,
I'm new to the thread and need help. My ipaq 614c's wifi keeps saying "unavailible" when switched on. When I create an ad-hoc connection my other devices sees it and can connect to it. The blue led flashes, but it doesn't pickup any networks at all. I have tried all availible channels on my wifi router with 802.11b and g settings sepretely. It has been working for a few hours when i got it. I'm on radio firmware 0.88, os 1.01.04 and run win mobile 6 pro. I tried radio firmware 0.89 a few times and win mobile 6.1, but my problem was'nt solved.
Please help?
Click to expand...
Click to collapse
I had the same problem with you until i recheck the security settings in the router.
Perhaps your network has security settings too. If it does these settings (see picture) must be the same as in your pocket pc (can be found in Wireless Manager --> Menu --> Wi-Fi Settings)
good luck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

raidmax said:
Hi,
I'm new to the thread and need help. My ipaq 614c's wifi keeps saying "unavailible" when switched on. When I create an ad-hoc connection my other devices sees it and can connect to it. The blue led flashes, but it doesn't pickup any networks at all. I have tried all availible channels on my wifi router with 802.11b and g settings sepretely. It has been working for a few hours when i got it. I'm on radio firmware 0.88, os 1.01.04 and run win mobile 6 pro. I tried radio firmware 0.89 a few times and win mobile 6.1, but my problem was'nt solved.
Please help?
Click to expand...
Click to collapse
Well i'd the same problem....I guess thr is no solution unless Hp replace this!!!i 'd the same prob and i contact HP greece...they r very helpfull and they replace my ipaq 614 with 5 business day with a brandnew one!!!!as they said its not repairable!!!so better to contact HP.if u've warrenty then its totally free of cost!!!UPS will pick up from home and deliver to your home.

so your on 0.88 at the moment , and you cant flash to 0.89?
Have you tried going to free wifi hot spots? usually starbucks, macca's etc
If go to a office etc does your ipaq see the connections (you dont need to connect, just see)?
If you cant even see public wifi's then its a hard ware issues and best you contact HP.

Is there any patch for 914c Wifi? running on WM6.5
After installing SP2 for DD-WRT on my Linksys router (who knows if related) my IPAQ can't connect to the home network, other devices can. It connects ok to other WiFi routers..
If I disable security, still device shows it as secured