am trying to acess this hidden wireless network in my school on a tmobile dash wit htc wm6 rom..i noticed that all the laptops were wireless so i was thinking if there was any way that i can find the signal on my phone and access...it
thanx in advance...
yeah u can easily do that.
just get the SSID, WEP key(if specified) and the channel of the WiFi network and put that in the wireless settings as a new connection and u will be able to connect to the network.
but there could be a problem if the network does not support DHCP or if there is some proxy setup of gateway defined as then u will have to get those details also.
Related
Hi
I have a WiFi network at home (802.11g), the network does not broadcast a network name and also has 64bit WEP security active.
When I turn on Wirless Lan On I cannot find my network.
When im out and about and turn Wireless Lan On, I can connect to any network thats available.
Has anyone got any ideas how i can setp up my PDA to work with my Wireless Network at home?
Many thanks
Matt
hi, im not able to connect to the net with my wizard.
i dont have a wireless router so am connecting directly to my laptop, the ad hoc connection i have made works fine for file tranfers, but not for activesync or connecting to the web in either PIE or minimo.
i know activesync isnt possible but surely i should be able to use the broaband from my laptop?
any pointers would be greatly appreciated. software? settings?
its a t-mobile uk vario with qtek test rom.
also anyone know of a remote control utility, i use logmein but would like something a little more menu/macro based for control of media.
cheers
kevo
Try turning on Internet Connection Sharing (ICS) on your laptop; that'll make your laptop act a bit more like a router, providing NAT services to the Wizard.
yeah i've tried that, and i've just tried bridging connections (dont really know much about that) but that hasnt worked either.
kevo
My configuration
Me too, I use ADHOC connection for my WLAN.
PC configuration:
ADSL connection shared
Adress IP:192.168.1.1 Mask:255.255.255.0
PocketPC configuration:
Adress IP:192.168.1.55 Mask:255.255.255.0 Gateway:192.168.1.1
DNS:80.10.246.2 for Wanadoo
Your problem is certainly the DNS.
You can put 192.168.1.1 too.
so it is possible? cool!.......but im still having problems.
i cant figure out how to enter these settings, not to sure where to put them,
iv tried puttin the DNS in the -> connections -> vpn
and -> network cards -> networks adapters -> SDIO WLAN Wireless Adapter
sorry to be a pain, but could you point me to where to get each address and where to put them?
also is there anything particular you did to set up the adhoc network? i just used the Windows XP wizard and then ticket the AdHoc option after.
my laptop is conected to the router and the router is connected to aol adsl.
the ip address of my laptop is showing as a simple 10.0.0. number on the LAN but "Autoconfiguration IP Address. . . : 169.254.235.147" for the WLAN
none of my setup has a static ip address, could this be causing the problems?
thanks
kevo
It's more hazardous without static adress but it's can work.
My PC has directly access to the Internet with a ADSL modem.
It's here (network cards -> networks adapters -> SDIO WLAN Wireless Adapter )
Apparently, it's ok for your PC and the Ad-Hoc mode.
Maybe, you should have your adress IP WLAN on the same network adress of your router.
I GOT IT WORKING!!!
I started again from scratch.
set a new WLAN. added new setup to the vario, added the DNS etc to the vario.
the problem i was having was the way i was sharing the internet connection, i was trying to shared the internet from the wireless to the lan rather than the internet from the lan to the wireless (if that makes sense to anyone!!!). i also ticked all the connection sharing services to allow them, just need to go through them and see which i dont need now.
thanks for the help guys
kevo
(its showing my transfer rate as 11Mbps, although i think iv done the G tweak and my laptop says its got a G card. what speeds should i be getting?)
hi guys, any help you can give is realy apreciated,
ive never used wifi before on my exec or in a home network so treat me as a beginer. ive got a pci wifi network card and i am trying to set it up so i can use my mda pro when i am at home. my computer is currently connected to my housemates wired network which is a simple set up
bb modem......
......|..............
....router........
..../....\..........
my.....his.......
pc......pc.........
like i said nothing fancy, i installed the network card which went fine and bridged my network connections together as advised by my large local computer retailer. my computer asked me to provide a name and network key so i did. my pc is now connected to my mda pro.
and in the wifi it displays
main
status connected to network
ssid: cusnet *thats what i entered as my network name*
tx rate:auto
mode: ad hoc
channel:6
bssid:00-71-0e-71-29-00
mac:00-09-2d-52-4d-66
ip:169.254.156.219
settings
half in power save
turn off not on
leap
nothing entered
...............................
every so often i get the following
*unable to obtain a server assigned ip address, try later or enter an ip address in network settings*
i cant get any internet based app to work and i am asumeing its due to the settings, any help is gonna be soooo apreciated
i dont want to subscribe to wifi in the city if i cant get it working in my own home lol
any one think this might be a network problem ?
ive posted a few questions on network forums but no reply yet
i am lost
:?
From the info that you have given, it looks like your universal is getting an incorrect ip address. What you need to do is check what your desktop ip address and gateway is. Then give your universal and ip in the same range as the desktop ip and also add the gateway to your device. It should wotk this way !
The best option would be to get a wireless access point instead of the wireless network card and set things up like this.
....bb modem......
...........|..............
........router........
..../......|......\.............
my...access......his......
pc......point.......pc......
The wireless access point plugges directly into the router rather than connecting through your PC.
If you don't fancy the above setup then you could use internet connection sharing. You'll need to remove the bridge between your network cards and ensure that the router,your PC and friends PC's isn't using 192.168.0.x IP addresses.
Then you can select ICS (tick the allow other computers to access internet...) on your network card's (one to the router) advanced properties and select your wireless NIC as your home network connection.
I hope this isn't too heavy I've resisted the temptation to start talking about subnets, NAT, DHCP and all the other networking terms.
ok heres the deal... i have a MDA flashed with the software from att for the 8125 everything works great except when i turn wifi on, i can connect to the network but cant ever get a page to work. does anyone have any suggestions????? please help
Is this happening on any network or your home network?
Check this... go to Settings - Connections - Network Cards. Make sure the WLAN Adapter is set to connect to the internet. Then tap the WLAN Adapter and make sure IP Address is set to Server Assigned then in Name Servers you don't have anything. If any of these is different, change it to the above.
Yeah. I have the same problem. I have wifi pci asus, the signal is good. I have Lan tru router and now bridged connection. I set the ip, mask and gateway which are in the status of the brudge. And the internet explorer and opera wont load pages.?!??! dns isnt set.
The network adapter is sdio wlan.., and the connection is my work network in connection > connections > advanced >select networks.
i use wm6, nbd 8.0
What could be the problem???
it is home network and all other wifi locations
i know there is a problem with secured networks, especially with wpa encryption. try to remove the encryption and see how it goes....
I have removed all encription. I tried preety much everithing and it doesnt work. All other free wifi networks work just fine, i can surf on internet.
what router do you have? i know that i could not connect to a 3com router with the wizard with any rom i tried.
try using a defined ip address and dns, meaning no dhcp. use a real dns addresses and not the default gateway...
Is there a way to make the wi-fi stick to 2.4GHz full time. The phone defaults to 5GHz. otherwise. Phone is rooted.
Imagine you have a wifi router you play with.
In wifi setting in this router, disable 5g. then add mac address of fone to mac address of 2.5 network security allow/deny give manual ip to fone before you connect with the fone in question.
This should force fone to use 2.4g.
I no longer have my firestick, but what I mean can be seen when first setting up the firestick, where you choose manual IP, ADVANCED - you disable the 2.4/5g, look for SWITCHING, roaming...
Band hopping. So many new names...
Pachacouti said:
Imagine you have a wifi router you play with.
In wifi setting in this router, disable 5g. then add mac address of fone to mac address of 2.5 network security allow/deny give manual ip to fone before you connect with the fone in question.
This should force fone to use 2.4g.
I no longer have my firestick, but what I mean can be seen when first setting up the firestick, where you choose manual IP, ADVANCED - you disable the 2.4/5g, look for SWITCHING, roaming...
Band hopping. So many new names...
Click to expand...
Click to collapse
Thanks. But the Netgear mesh router does not have the 2.4 and 5g separation provision. It's both or none. .