Related
You will find extended rom and all rom files in extracted form.
Have fun! :lol:
ftp://xda:[email protected]/Uploads/Magician/extended rom 1.12.119 wwe
and
ftp://xda:[email protected]/Uploads/Magician/extracted qtek 1.12.00
thormdac said:
You will find extended rom and all rom files in extracted form.
Have fun! :lol:
ftp://ftp.xda-developers.com/Magician/extended rom 1.12.119 wwe/
and
ftp://ftp.xda-developers.com/Magician/extracted qtek 1.12.00/
Click to expand...
Click to collapse
hello! I'm wanted to know how do you extract the Extrom from ppc? meaning the each file such as CallerID, PhonePad, etc.. thank u in advance.
That are the wrong Folders!
Over here the right Paths
ftp://xda:[email protected]/Uploads/Magician/extended rom 1.12.119 wwe
ftp://xda:[email protected]/Uploads/Magician/extracted qtek 1.12.00
Sorry , folders fixed!
There are plenty threads explaining this, but here you go:
Extraction of extrom:
-Install required rom
-On first start up setup ppc untill " please tap screen" to finalize
-Within the 3 second count down soft reset your system
-you will see exposed extrom via explorer
-from within active sync/explore navigate to folder and copy to pc
-voila, each cab can be started manually from within ppc[/quote]
Hi everyone:
I just bought my Dopod 828, however it language is Traditional Chinese, and I want to change the ROM to englisg.
So where I can find the english rom for this pda and what is the procedure and precaution I need to take during the upgrading.
Joel
Hi...
go to the ftp from here,and download a WWE ROM of ur liking (1.12WWE is an example),also download MaUpgradeUt_noID.exe and flash ur device....
RAGO :lol:
Thanks,
I logged in to the ftp site, there are many folder and many ROM, however what is the different between them?
Shipped_ROMS
Dumped_ROMs
Modified_ROMs
Extended_Roms
BigStorage_ROMs
Radio
Unlock
Thanks Joel
joelwu said:
Thanks,
I logged in to the ftp site, there are many folder and many ROM, however what is the different between them?
Shipped_ROMS
Dumped_ROMs
Modified_ROMs
Extended_Roms
BigStorage_ROMs
Radio
Unlock
Thanks Joel
Click to expand...
Click to collapse
Shipped=original ROM provided from factories(ex:O2,T-mobile,I-mate...)
Dumped=ROMs dumped for SD memory cards upgrades(forget about them for the moment)
Modified=Modified ROMs using kitchens(forget about them also)
Extended=ms_.nbf=not ROM image,but extended ROM where softwares are preinstalled,and start automatic installation after a hard reset...(also forget about them)
Big storage=enlarge ur storage space by freeing the extended ROM memory..(not now,so also forget about them)
Radio=radio_.nbf=not ROM image but ur phone part upgrade(ur device is a phone and a PDA,these ROMs take care of the phone part)
Unlock=not ROMs but tools to unlock ur device if it's locked from communication networks like t-mobile,etc....
so,as a conclusion,use shipped ROM folder... :wink:
RAGO :lol:
Very detailed explaination!
Thank you very much.
I will try to upgrade my device in this week end, good luck to me
Just curious about how other customer the extended rom etc.....
And I saw many CAB file to install... is this those modification that other have make to improve the device?
RAGOv said:
joelwu said:
Thanks,
I logged in to the ftp site, there are many folder and many ROM, however what is the different between them?
Shipped_ROMS
Dumped_ROMs
Modified_ROMs
Extended_Roms
BigStorage_ROMs
Radio
Unlock
Thanks Joel
Click to expand...
Click to collapse
Shipped=original ROM provided from factories(ex:O2,T-mobile,I-mate...)
Dumped=ROMs dumped for SD memory cards upgrades(forget about them for the moment)
Modified=Modified ROMs using kitchens(forget about them also)
Extended=ms_.nbf=not ROM image,but extended ROM where softwares are preinstalled,and start automatic installation after a hard reset...(also forget about them)
Big storage=enlarge ur storage space by freeing the extended ROM memory..(not now,so also forget about them)
Radio=radio_.nbf=not ROM image but ur phone part upgrade(ur device is a phone and a PDA,these ROMs take care of the phone part)
Unlock=not ROMs but tools to unlock ur device if it's locked from communication networks like t-mobile,etc....
so,as a conclusion,use shipped ROM folder... :wink:
RAGO :lol:
Click to expand...
Click to collapse
joelwu said:
Just curious about how other customer the extended rom etc.....
And I saw many CAB file to install... is this those modification that other have make to improve the device?
Click to expand...
Click to collapse
Hi...
In the Magician,extended ROM customization is not as easy as other devices.
For himalaya devices,u can use ER2003edit to open ms_.nbf files,edit them by replacing the cabs,or u can unlock and unhide ur extended ROM using extrom unlocker,then u wille able to see extended ROM as a removable drive,and u can edit cabs within...(note that cabs are *.cab files,or cabinet files,those files are executable on ur PPC,almost every program or software is a cab file,even if it doesn't look like,cab file must be contained in,exept executable applications on PPC like .exe that runs directly by clicking on)
In BlueAngel,ER2003edit don't open it's ms_.nbf,but still u have an extrom unlocker for BAs....so u can also edit ext ROMs...
Now in Magician,and due to the difference in hardware architecture(Magician have one rom slot of 64mb),this device don't have (yet) an ext ROM unlocker,and ER2003edit do not open it's ms_.nbf files....(and the member (Anansky) who did the big storage and we all believe he can make or help in making extrom unlocker,seem to have vanished... :? ...)still,there's advanced methods to customize ur ext ROM,but take into consideration that they r not easy....
1-by dumping the ROM to storage card,then using ntrw and a hex editor to cut a partition of the decoded ROM(the ext ROM),mounting it as virtual drive using total commader plugin,editing it,and reflashing using SD method....ouff...read more about this method from here...
2-by freeing ur ext ROM memory using big storage,then making a folder called 2577 on ur storage card,put in autorun.exe and a .zip file containing ur cabs,so,once u do a hard reset,the cabs will be installed automatically from ur SD card....read about big storage from here and here...learn about 2577 folder from buzz's site... http://www.buzzdev.net/
note that this method does not make u an extended ROM like ms_.nbf,but will do the job as it will install ur favorite cabs directly after hard reset....
Good luck...
RAGO :lol:
Just to share with everyone after few days trying, I have succesfully upgrade my dopod 828, the main problem is facing the Error 150, the Upgrade utility is not designed for this device
The procedure is more or less the same as pervious post in this forum, but just little bit different
1. Right click on the EXE-file and extract to a named folder (using Winzip or something similiar)
2. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade
3. Download the MaUpgradeUt_noID.exe
4. Once you have this file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
----- until step is exactly the same
Skip this step-> In ActiveSync, click on file and connection settings and untick the USB connection.
5. In ActiveSync, go to option -> Schedule, Set it to Manual, this is to make the PPC USB connection to ActiveSync active but don't do any Sync with your PC and PPC during the upgrade process.
6. Connect the phone to the USB, manually sync once. From now onwards, the step is the same.
-----
7. Now run the MaUpgradeUt_noID.exe
8. The upgrade Wizard will start, go through a few checks then eventually come up with the country Id error.
9. Run the MaUpgradeUt_noID.exe file again and this time it should allow you to run the Wizard.
10. The process should then go through 3 stages which should last about 10 - 15 minutes.
11. When finished you should get the upgrade successful notification and a prompt to reset the device
12. In ActiveSync, click on file and connection settings and tick the USB connection.
13. Enjoy your new ROM
I am trying to upgrade my Dopod 828, and I get a error no. 150 said the ROM is not designed for this device... oh.....
RAGOv said:
joelwu said:
Just curious about how other customer the extended rom etc.....
And I saw many CAB file to install... is this those modification that other have make to improve the device?
Click to expand...
Click to collapse
Hi...
In the Magician,extended ROM customization is not as easy as other devices.
For himalaya devices,u can use ER2003edit to open ms_.nbf files,edit them by replacing the cabs,or u can unlock and unhide ur extended ROM using extrom unlocker,then u wille able to see extended ROM as a removable drive,and u can edit cabs within...(note that cabs are *.cab files,or cabinet files,those files are executable on ur PPC,almost every program or software is a cab file,even if it doesn't look like,cab file must be contained in,exept executable applications on PPC like .exe that runs directly by clicking on)
In BlueAngel,ER2003edit don't open it's ms_.nbf,but still u have an extrom unlocker for BAs....so u can also edit ext ROMs...
Now in Magician,and due to the difference in hardware architecture(Magician have one rom slot of 64mb),this device don't have (yet) an ext ROM unlocker,and ER2003edit do not open it's ms_.nbf files....(and the member (Anansky) who did the big storage and we all believe he can make or help in making extrom unlocker,seem to have vanished... :? ...)still,there's advanced methods to customize ur ext ROM,but take into consideration that they r not easy....
1-by dumping the ROM to storage card,then using ntrw and a hex editor to cut a partition of the decoded ROM(the ext ROM),mounting it as virtual drive using total commader plugin,editing it,and reflashing using SD method....ouff...read more about this method from here...
2-by freeing ur ext ROM memory using big storage,then making a folder called 2577 on ur storage card,put in autorun.exe and a .zip file containing ur cabs,so,once u do a hard reset,the cabs will be installed automatically from ur SD card....read about big storage from here and here...learn about 2577 folder from buzz's site... http://www.buzzdev.net/
note that this method does not make u an extended ROM like ms_.nbf,but will do the job as it will install ur favorite cabs directly after hard reset....
Good luck...
RAGO :lol:
Click to expand...
Click to collapse
Hello,
I have read that some people have been having a bit of trouble with customising their extended rom on the Universal. So here is my attempt at creating a guide, as a way of saying THANKS to all who helped me in these forums to create my own customised ROM's on the blue angel and my current EXEC.
First thanks mainly to Buzz for the Ext Rom Unlocker and also to BeyondTheTech for the Disable Security Cab.
Also thanks to all other members who contributed their trials and files in the thread.
IMPORTANT - DO A BACKUP BEFORE DOING THIS AS A HARD RESET IS REQUIRED!!!!
Here Goes:
This is how i did it:
1. I created a folder on the desktop called Exec, and inside i created 2 folders called Orig Rom and Cooked Rom
2. I then downloaded the following 3 files and placed them into the Exec folder.
3. i copied the unlock policies and the ext rom unlocker onto sd card and copied them to the phone.
4. i ran the unlock policies cab first then the ext rom unlocker cab
5. under programs i clicked on ext rom unlocker to execute the file
6. it then said succesful and reboot to finsh
7. once rebooted install total commander from below.
8. i then ran total commander and typed in /extended_rom (note underscore) and it displayed the contents of the exteneded rom that originally came with the phone.
9. selected it all and copied the contents to SD card.
10. if you connect your phone directly to pc then you can copy the contents directly to the 'orig rom' folder you created earlier, or use card reader to do same.
11. either way you have the contents of the ext rom on the pc. i then deleted the contents of the Extended_Rom on the phone.
12. the next steps are done on the pc.
13. copy the autorun.exe and the config.txt file from the 'orig rom' folder to the 'cooked rom' folder.
14. copy all the CAB files that you want to be installed upon hard reset into the cooked rom folder aswell.
15. copy the disable security.cab file into the 'cooked rom' folder aswell
16. you will need to rename the cab files that you want installing in the following format:
Default_Unsigned_xxxxxx.cab where xxxxxx is the name of the file
17. if the cab files have long names then just rename them!
18. if you wanted to keep some of the original cabs from your extended rom then copy these into the 'cooked' folder aswell but leave their naming system alone ie:
Signed_UNI_Remove_BatteryIcon.sa.CAB
19. once these have been named as above open the config.txt file
20. it needs to be prepared into the following format :
LOCK:Enabled
CAB: \Extended_ROM\Default_Signed_DisableSecurity.CAB
CAB: \Extended_ROM\Default_Unsigned_tcpmp.arm_ce3.cab
CAB: \Extended_ROM\Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
CAB: \Extended_ROM\Default_Unsigned_Porta-Pinball.CAB
RST: RESET
this is an extract from my config.txt file
21. i used the existing file and amended the entries, add/deleted some of the entries.
22. note the space between Cab: \ this is important.
23. also note that the first file that i wanted to install was the disablesecurity.cab file, without this the other 'personal' cabs will not install.
24. so once you have edited and saved your config.txt files making sure all spelling is correct (also an important thing otherwise the files dont install) and no warnings are issued either! you will have in your 'cooked rom' folder:
autorun.exe
config.txt
and several cab files
25. select all the files and then 'right click' on properties.
26. select the 'read-only' option and ok
27. i found that after the first install some of the cab files delete themselves! this prevents that from happening.
28. connect your phone to the pc
29. using active-sync Explore device and navigate to the Extended_Rom folder
30. copy all the contents of your 'cooked rom' folder into the Extended_Rom folder
31. once completed, disconnect the phone and perform a hard reset.
32. after you have aligned screen and done the start-up routine it will start installing your personallised cab files.!!
33. You should now have an Exec, customised with your own extended rom and as a bonus a complete back-up on your pc.
34. if ever you upgrade the phone rom/radio etc, all the software you need and the perosnlaised rom is ready to go.
if i have missed a step plz post back and i will edit my posts and put in there.
I cannot stress how important it is that you make a backup first before doing this as you will lose everything on the phone.
Bye for now!!!
Gr8 Work!!!
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
mail attachments
Thanks for the guide, however when i use total commander, extended rom is shown with the same symbol as storage card and I cannot get the mail programme to save attachments to the real storage card as the universal thinks the extended rom is the storage card.
How can the properties of the extended rom be changed so it does not appear to be a storage card ?
Thanks
Steve
Re: Gr8 Work!!!
krassen said:
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
Click to expand...
Click to collapse
i have the same problem, any solution?
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Re: Gr8 Work!!!
majdi said:
krassen said:
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
Click to expand...
Click to collapse
i have the same problem, any solution?
Click to expand...
Click to collapse
I just renamed the required cab file by adding "Default_" to it. That did it.
Thanks
But I have been through the thread numerous time.
The mail programme thinks the extended rom is the storage card.
The thread has a fix to hide the extended rom so the mail programme now saves attachements onto the real storage card.
It just seems a shame to have gone to all the trouble to unlock and make visisble the extended rom, just to hide it again so the mail programme can save onto the real storage card.
Am I missing something. Simple guidance PLEASE.
Steve
hollytree said:
Thanks
But I have been through the thread numerous time.
The mail programme thinks the extended rom is the storage card.
The thread has a fix to hide the extended rom so the mail programme now saves attachements onto the real storage card.
It just seems a shame to have gone to all the trouble to unlock and make visisble the extended rom, just to hide it again so the mail programme can save onto the real storage card.
Am I missing something. Simple guidance PLEASE.
Steve
Click to expand...
Click to collapse
When the hard reset is done the whole point is for the Extended Rom to be hidden again. This ensures that at any point in the future if a hard-reset is required then the phone is setup agian as you want it.
At the moment the Extended_rom partitrion cannot be used as a storage space , and i believe Buzz is working on that.
So my guide illustrates deleting existing rom, and replacing with personalised rom and then hiding it agian.
Above this thread is a link to Buzz's small tutorial to alllow attachemnts to be saved back to storage card instead of the Extended Rom for those who want to leave it Un-Hid.
Regarding those without a config.txt file then renaming everything to Default_xxxxx.cab does the trick.
thanks
This is a GREAT thread. Hats off to you.
Personally, I think I'm going to add the T-Mobile USA Internet Settings cab to "cooked" stuff (I'm in the US).
Does anyone have a cab that will set up the gmail pop settings (w/ generic un/pass of course)? Lazy, yes, but I'm just trying to make any refresh that I would ever need to do that much simpler
i have another question as we have a lot of good registry tweaks....
is it really that hard to create cab files for those registry settings and just throw those in the extRom
regards
krassen
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
majdi said:
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
Click to expand...
Click to collapse
If you dont have a config.txt file then you need to rename your cab files in the following format:
Default_xxxxxx.cab where xxxxx is the name of your file. this has been found to work in your phone.
thanks
many thanx to u.
this worked just fine.
cheers
disable security cab
Does anyone know where I can download the DisableSecurity.CAB as the links no longer work.
Thanks
Steve
Re: disable security cab
hollytree said:
Does anyone know where I can download the DisableSecurity.CAB as the links no longer work.
Click to expand...
Click to collapse
Did you try the first post in this thread?
You have to register and be logged in to see the files...
links worked for me
l6cum said:
majdi said:
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
Click to expand...
Click to collapse
If you dont have a config.txt file then you need to rename your cab files in the following format:
Default_xxxxxx.cab where xxxxx is the name of your file. this has been found to work in your phone.
thanks
Click to expand...
Click to collapse
It's shuld be Default_xxxxxx.cab or Default_Unsigned_xxxxxx.cab / Default_Signed_xxxxxx.cab, now ?
I was out of the forums for few years and missed how to make ExtROM for BA for WM6. I used to create for WM 2003.
Can some one provide me the link for it which works for WM6 and creates ExtROM?
I created an ExtROM folder in Storage Card with all the cabs and also added AutoRun.exe from my collection of WM 2003 and wrote proper Config.txt file, but it didnt work.
help help help. tried to flash my windows 2003 phone to wm6 using maupgrade tool. didnt work propely now phone has dim display saying serial at the top and v.2.03 at bottom! pc wont recognise it, whwt have i done wrong!!! rga
Dude, did you follow the steps in the wiki? or did you just flash it using the tool without setting it up first?
read wiki, tell u what happened i was upgrading using baupdate tool and took phone out of dock b4 it had finished! so now at stuck in bootloader mode( serial at top, and v2.07 bottom), so when try and flash again same as it doesnt detect old system, to overide with wm6 software. i cant figure out how to sort it now as cant get off bootloader. connects to pc with usb link, but cant see phone in pc because it as if phone is empty at the moments, connects as an unknown device. just trying to find out how i would flash the phone from the start now! rga
ive done it. the problem i was having was finding the replacement driver for usb connection when i wanted to use mmty and baupgrade tools. sweet now , using wm 6.5 now its classsssss! RGA
so the question is...... Did you figure it out already or not?
@markanthonypr
i guess he's happy now man. he will love flashing his BA from now on hehehe...
@reggaedave
Congrats man!
reggaedave said:
help help help. tried to flash my windows 2003 phone to wm6 using maupgrade tool. didnt work propely now phone has dim display saying serial at the top and v.2.03 at bottom! pc wont recognise it, whwt have i done wrong!!! rga
Click to expand...
Click to collapse
You seem to be new to the forums. Thank you for joining XDA-Developers.
Please take a minute to go over the Rules and Regulations of the forum.
Also, it seems that you are a Blue Angel owner, in which case I will encourage you to go over the BA forum regulations here
For questions, please use the search function in the site or simply Google for an answer. More than likely, your question has probably been answered before and the answer is floating around somewhere in the site. That being said, unless you are contributing to the site with either skins, roms, ports, new applications, programs, games, etc., please [highlight]do not[/highlight] open new threads. However, if you do have questions, you can post them either in the BA Q&A section or in the General Q&A section.
Thanks.
ha yeah im happy enuf! i dont know anything about these phones, ive been modding Sony Erricson phones for the past 2 years but this ones all new to me!.
ROM VERSION 6.50.21.WWE
ROM DATE 03/28/09
RADIO VERSION 1.06.00
PRTCL VERSION 1337.38
EXTROM
In another pack i downloaded, nothing to do with what i flashed, it had a file labelled EXTROM, with loads of stuff in it, could this be put on my phone, bear in mind i know almost nothing at the moment? cheers off work 4 a week reggaedave!
the "file" extrom is an archive, which first needs to be unpacked to become the folder extrom. in there you find the following things:
1. Autorun.exe
2. CFG.txt
3. custom.bmp
4. a lot of cab files
there are 3 basic ways to handle the extrom after flashing:
1. you copy the cab files you want to an sd card and install them one by one
pro: fast if you know you don't need much or want to install to ramdisk or storage card
con: slow, when you install a lot of programs that go to the phone memory anyway and you plan to install the same progs every time you hard reset or flash a new rom
2. you customize you extrom by deleting cabs, adding new ones (you have to list them in cfg.txt)
pro: one folder to copy, installation process automated
con: all progs go to phone memory, you need to customize the cfg first
3. you take the extrom as it is
now for the explanation:
the extrom is a folder containing basic system programs that are not included in the rom, so their installation is optional. i don't know whether you worked with your device before, bust most names should ring a bell, if not, refer to the wiki or google the names for detailed descriptions.
what you need to do to install the extrom as it is: copy the folder extrom to an sd card and insert it after hard reset (make sure the cfg.txt lists all the cabs in the folder), a window will appear that tells you that the automated customization begins, you wait, after the next (automatic) soft-reset you have the programs on your device.
(mmh, probably that last part was the answer to your question, should have started with that. )
greetz
Chef_Tony
ok ill have a go now, thanks for the advice! cheers..RGA
Chef_Tony said:
the "file" extrom is an archive, which first needs to be unpacked to become the folder extrom. in there you find the following things:
1. Autorun.exe
2. CFG.txt
3. custom.bmp
4. a lot of cab files
there are 3 basic ways to handle the extrom after flashing:
1. you copy the cab files you want to an sd card and install them one by one
pro: fast if you know you don't need much or want to install to ramdisk or storage card
con: slow, when you install a lot of programs that go to the phone memory anyway and you plan to install the same progs every time you hard reset or flash a new rom
2. you customize you extrom by deleting cabs, adding new ones (you have to list them in cfg.txt)
pro: one folder to copy, installation process automated
con: all progs go to phone memory, you need to customize the cfg first
3. you take the extrom as it is
now for the explanation:
the extrom is a folder containing basic system programs that are not included in the rom, so their installation is optional. i don't know whether you worked with your device before, bust most names should ring a bell, if not, refer to the wiki or google the names for detailed descriptions.
what you need to do to install the extrom as it is: copy the folder extrom to an sd card and insert it after hard reset (make sure the cfg.txt lists all the cabs in the folder), a window will appear that tells you that the automated customization begins, you wait, after the next (automatic) soft-reset you have the programs on your device.
(mmh, probably that last part was the answer to your question, should have started with that. )
greetz
Chef_Tony
Click to expand...
Click to collapse
Excellent description Chef Tony! It should be added to the Wiki/Wizard page as there is no clear description of it there, and I had to search this forum for quite a while to get a definitive answer as to what an extrom was!
okey dokey failed! ha. file extrom contains AUTORUN, CUSTOM, CFG, and many CAB files. Placed it on memory stick. Tried to open cabs one by one none worked, said was unsuccessful. One thing is that the CFG file is blank, do i need to be writing text in there of some sort? This is harder than a sony erricsson phone! what and how do people use the display a deskbar on the main screen, ive disabled the windows default set of icons, is there a better external app to use for it? answer whatever you can i know nothing about ppcz
reggaedave said:
okey dokey failed! ha. file extrom contains AUTORUN, CUSTOM, CFG, and many CAB files. Placed it on memory stick. Tried to open cabs one by one none worked, said was unsuccessful. One thing is that the CFG file is blank, do i need to be writing text in there of some sort? This is harder than a sony erricsson phone! what and how do people use the display a deskbar on the main screen, ive disabled the windows default set of icons, is there a better external app to use for it? answer whatever you can i know nothing about ppcz
Click to expand...
Click to collapse
It sounds to me that you need to go back to suggestions of reading the wiki my friend. You need to downgrade to wm2003, and follow instructions step by step. This is where to start... Choose the proper answers and it will walk you through.
and if your cfg.txt file is really empty (which i don't understand, as many people downloaded the package and had it working), here is a sample extrom, that i wrote for myself:
LOCK:Enabled
SHOW:\Storage Card\EXTROM\Custom.bmp
CAB: \Storage Card\EXTROM\ADC.cab
CAB: \Storage Card\EXTROM\A2DPFix.cab
CAB: \Storage Card\EXTROM\Extrom_version.CAB
CAB: \Storage Card\EXTROM\GoogleMaps.cab
CAB: \Storage Card\EXTROM\HTC Large Title Bar.cab
CAB: \Storage Card\EXTROM\HTC_Task_Manager_2.1_34837.5.cab
CAB: \Storage Card\EXTROM\HTC_Touch_Calculator_Skin.cab
CAB: \Storage Card\EXTROM\HTC_WMP_Touch_Skin.cab
CAB: \Storage Card\EXTROM\Office_6.1.21202.cab
CAB: \Storage Card\EXTROM\PHM Regedit.cab
CAB: \Storage Card\EXTROM\PIE8_Flash3.1_21202.cab
CAB: \Storage Card\EXTROM\pocketrar.cab
CAB: \Storage Card\EXTROM\psShutXP.cab
CAB: \Storage Card\EXTROM\RDM_21202.CAB
CAB: \Storage Card\EXTROM\sipchange.cab
CAB: \Storage Card\EXTROM\skybox.CAB
CAB: \Storage Card\EXTROM\skybox.CAB
CAB: \Storage Card\EXTROM\SMS Delivery Receipt Fix.cab
CAB: \Storage Card\EXTROM\WMWidgets.cab
CAB: \Storage Card\EXTROM\youtubeplay.cab
LOCKisabled
HIDE:Enabled
EXEC: \Windows\DelCDetect.exe
HIDEisabled
RST: Reset
as you can see it is just some basic commands and a list of cab files, so you can do it yourself.
Oh, and where the smileys are, there of course has to be ":" "D" but as they stand without space, they make fun of the HIDE function should have posted it is code
@reggaedave,
How much free storage space do you have after a clean flash?
Everybody more cleverer than me im looking into extrom!
Storage
total: 43.26 MB
in use: 10.80 MB
free: 32.45 MB
program
total: 90.93
in use: 29.86
free: 61.07.
Learning the basics a bit now after getting bollocked! ... silly question but here goes, if i wanted to replaced png in the windows folder, should i just overwrite them with my own pngs, with same dimensions and names, is that how people change the interface graphics? apprentice ppc modder!....
Also trying to get my head around themegen program, because got loads of stock gfx to use so hopefully should be able to create some fantastic themes soon! over and out! Rga
reggaedave said:
Everybody more cleverer than me im looking into extrom!
Storage
total: 43.26 MB
in use: 10.80 MB
free: 32.45 MB
program
total: 90.93
in use: 29.86
free: 61.07.
Learning the basics a bit now after getting bollocked! ... silly question but here goes, if i wanted to replaced png in the windows folder, should i just overwrite them with my own pngs, with same dimensions and names, is that how people change the interface graphics? apprentice ppc modder!....
Also trying to get my head around themegen program, because got loads of stock gfx to use so hopefully should be able to create some fantastic themes soon! over and out! Rga
Click to expand...
Click to collapse
That is exactly what I thought! You should seriously taking a look at the Wizard in the Wiki that markanthonypr pointed to you. I'll put it in simple terms... you did not follow the process completely (didn't unlocked and resized the storage). The reason why you cannot install your cabs for your ExtRom is simply because the old ExtRom still exists in your phone. Also, since all of these files are still there taking up space, instead of having about 60 MB of storage, you have roughly 43 MB. Long story short, you have to start from scratch (and I do mean from scratch... go back to stock 2003). Please follow the Wizard in the Wiki [highlight]step by step by every single step.[/highlight]
After you get an OS installed properly, you can continue modding the phone to your liking, but at this point, it is meaningless since you will have to hard reset your device a few more times.
ERROR!
Oh lord... ok, ive seen a lot of info since i did my first flash, ( seen the formating storage info), ill have a look and see if i can sort it.Originally i was stuffed because i got to the point that my phone was stuck in bootloader mode and paniced so thats why a rushed flash happened, and because it was about 3 in the morning aswell. Ill follow link, when i did my flash i followed a post actually in a thread, not from wiki, suppose that didnt help me much.Ill try again from scratch!
Wowzer what a night. Not done it yet. Had a total nightmare. Flashed my phone back to WM6 again in the end. Followed the instructions but couldnt pull it off, have to have another go.
Got as far as getting Downgrade to wm2003 pack, put the nk.nbf file in folder that had been extracted, but couldnt get maupgrade tool to recognise my phone to reflash it. So phone was stuck in bootloader so flashed it again using maupgrade with the WM6 files in and it come up straight away, so just flashed it to get back to beginning.
Will have to make my own notes and do it myself without having to search pages, also b4 i couldnt get mtty app to get into phone, wouldnt let me type commands so that was doing my head in. Couldnt find any info in any wiki wizzard link about commands for mtty! anyhows im knackered. Work in progress. Am i right in thinking that i need to flash my phone back to a wm2003 rom, do the nessasary formatting of storage, then upgrade to a version of wm6?? is that what i should be looking at? Knackered No time for any REGGAE Dave!
Yes!
Yep Dave, that is correct.
You need to flash back to 2003, install the unlock and unhide cabs as per the Wizard and execute them in the correct order.
Follow all steps! Do not skip anything and you should be ok.
After that continue on through the Wizard instructions to flash your new rom.
Best of luck.