Related
Hi all,
We just released a new dialer (freeware) which you can download from Handango. You can download from
http://www.handango.com/PlatformProductDetail.jsp?productId=152403
Features included in KikkerDialer are:
- The most advanced number dialing system which allows for entry by number panel or keyboard, editing, insertion, copy / paste, etc
- Intuitive and simple UI providing the main functions of a phone such as contacts, dial, access to special characters (e.g. the + sign for international dialing)
- A user interface for selecting contacts which mimicks the most intuitive methods for selecting contacts such as those used within standard mobile phones such as Nokia, Sony Ericsson, etc
- Synchronisation with contacts database (mobile, work, home)
- Extremely fast and responsive to use
- Access to the Windows Mobile clipboard for copy / paste
Feedback welcomed. Enjoy.
Kikker Interactive
I'm sorry, but I really don't see what is so special about this software. Maybe I have got it wrong, but I would say that D9 is better than this, and PhonePlus is much better. I don't want to scroll to the letter J every time I want to call my friend John, and so on.
Copy and paste is nice, but where is the T9 contact selection as in D) and PhonePlus, I think that is a great feature.
The fact that this diealer resembles old standard GSM phones is of no interest.
Sorry for only giving bad feedback, but then again, I might haven't found the cool features.
nteresting… just tried this
First comment - good to see another free dialer out there given what shipped with the jam.
ave only tried this for abt 15 minutes but like it very much so far. Is a lot faster than D9 (my only complaint with that software – I have ~ 1,000 contacts in my jam and the UI is v unresponsive). The thing I like with this new dialer too is the editable text field which seems to be missing on most other apps out there. The ability to edit a number before a call (e.g. insert +44 if not already in international prefix), insert a digit when you have entered incorrectly, etc is just what I was after. Would be nice to see call history in there too btw.
Intuitive and simple UI providing the main functions of a phone such as contacts, dial, access to special characters (e.g. the + sign for international dialing) --->Cool... :wink:
Crashed on my WWE Qtek S100 .. when I try to call ..
Carlis
Hi Carlis,
In the first few hours of release, the first installer required you to have OpenNETCF on your device. It seems not so many people have this so we fixed this issue and now you no longer need this on your device.
You should uninstall the KikkerDialer and run the the new installer file (now setup.exe - ~2MB), downloadable from the same location at Handango. Please give this a go and let us know if any probs - [email protected]
Best rgds,
Kikker Interactive
I'm surprised all of you think different than me, but I will give it another try, I guess. I still don't think it can compare with PhonePlus with all the features it has, but then again it's freware.
/T
Cant downlod the Setup.exe, it still downloads the setup.msi, is this the right version? I'm getting the same crash. Can someone post it here?
ZeroXtreme said:
Cant downlod the Setup.exe, it still downloads the setup.msi, is this the right version? I'm getting the same crash. Can someone post it here?
Click to expand...
Click to collapse
for me the download link does not work at all. Page cannot be displayed.
Well, I downloaded the MSI-file from handandgo. Now in can run on my T-Mobile MDA Compact but when I try to dial, it crashes:
KikkerDialer.exe
TypeLoadException
Failed to load type OpenNETCF.Notification.Led from OpenNETCF.Notification, Version=1.2.3346.0, Culture-neutral, PublicKey Token= 30C767B29D52D6E6
Can it be fixed? I wanted to test this application concerning tone dial (DTMF sending).
Anonymous said:
Hi Carlis,
In the first few hours of release, the first installer required you to have OpenNETCF on your device. It seems not so many people have this so we fixed this issue and now you no longer need this on your device.
You should uninstall the KikkerDialer and run the the new installer file (now setup.exe - ~2MB), downloadable from the same location at Handango. Please give this a go and let us know if any probs - [email protected]
Best rgds,
Kikker Interactive
Click to expand...
Click to collapse
Hi
Thank´s for the answer...
but .. hm .. its not an exe on the same location .. its still the MSI ..
Carlis
ZeroXtreme, 718 & Carlis - Our apologies - we actually meant to the setup.MSI - the file you see up there is the right one (it is not an .exe).
However, seems some of you are still getting a runtime issue on your devices. We suspect this is due to a missing DLL - but cannot replicate your issue right this moment. We've just received some more devices now tho and are retesting. Will post a response here shortly. Feel free to email us directly in the meantime.
Iggy - the handango site must have been having problems. You should try again.
Kikker Interactive
Beta testing - never easy. I'm having enough trouble and bugs beta testing Mobi Dial 2.5 right now, so I'll think I'll pass on this one. Someone let me know when there actually is a legit, ergonomically competent and STABLE replacement dialer out there.
OK thank you all for your patience.
Our new devices arrived and we were able to replicate the issue that some of you were having. This has now been solved with a new version of the setup.msi (now named setup_20050202.msi as Handango doesn't seem to allow overwriting).
You can either download the new app from Handango (http://www.handango.com/PlatformProductDetail.jsp?productId=152403) or we've also hosted it at http://69.20.6.190/KikkerDialer/setup_20050202.msi for your convenience.
If you don't want to go through the process of download + installing the 2MB file again, there is an easier way for those of you who already have the previous version installed. Please follow the steps here:
1. Quit the KikkerDialer
2. Download two dll's http://69.20.6.190/KikkerDialer/OpenNETCF.Notification.dll and http://69.20.6.190/KikkerDialer/OpenNETCF.Phone.dll
3. Copy both files to \Program Files\KikkerDialer on your device (or wherever you installed the dialer)
4. Restart the app
Any problems - please let us know. Again, apologies for the false start for some of you. From those who were not affected however, we had some v positive feedback and to repay all your efforts, will add some more features within the next few weeks
Kikker Interactive
Yes, with the dlls you provided the program starts okay. However, I failed to dial DTMF tones. Sometimes it is necessary to dial extention or enter a PIN-code. Such a pitty!
Exelent .. thx.. it now works on a Swedish WWE Qtek s100 without need of the extra dll´s ..
Only thing that is missing .. DTMF codes .. to use bank transactions and so..
When they ask for my account nr .. and I press the keys.. nothing happends..
And finaly .. how to replace the old dailer hardware keys.. Green and Red phone keys to be using Ur dailer.. it still actiavte the old one..
Best Regards Carlis
Hi - ok glad we got all the installer issues cleared up.
Yep - DTMF tones are not supported currently. As users of the software, here is what we do:
- Make the call using KikkerDialer
- When prompted to enter PIN (etc), press the green call button and the standard windows dialer will appear
- Type in your code using this interface
This works fine against all systems. Obviously not as intuitive. We are however, working on building in DTMF into our next release and have made some progress so far but won't ship till its ready. At the same time, we'll try to address the issue of how to bind KikkerDialer to the green call button.
Keep giving us your feedback in the meantime, v useful.
Best rgds,
Kikker Interactive
Would you manage dialing DTMF tones, you'll be great! But please note that the standard Windows dialer do not work correctly with the DTMF tones. There is something wrong with the duration of the tone, as I suppose. So with that dialer I often reach wrong extention or dial wrong number.
First of all thank you for the freeware.
in spite that, I dont think I would throw phoneplus away yet which serves my every needs.
But it is nice to see some developers trying to give some fight to proffesionals.
Thanks for all your comments. We're still working on getting a v1.0 out there shortly and the latest is good news. From the latest development version of the KikkerDialer, we now have full control of all the JAM buttons such as the direction pad middle button (to select contacts), the green dial button (to open the dialer and make calls), etc. This feature alone allows for complete one handed usage of the dialer (i.e. no stylus).
Now focus remains on adding:
- Call history
- Easier searching on contacts
- DTMF
This last, frequently requested, item is proving to be quite a challenge. We shall persist!
Best rgds,
Kikker Interactive
Using codes from here - http://www.arcx.com/sites/GsmFeatures.htm
I want to setup speed dial to re-direct my phone sometime. However if I put *21*[Phone Number]# into a contact and try and dial it I get "Command not supported".
Any way I can do this?
Thanks
M.
does the command work if you put it directly into the phone pad dialler and press dial??
Yup, works perfectly like that. Looking for a way to do it from a memory quickly. Any ideas?
Thanks
M.
Hi Otto-Mate,
I've no time to test and don't know if the HTC Universal allows but have you tried saving the number to the SIM and linking the speed dial to it there?
If this device (having a quick look show's it's not) GCF certified then it should be able to dial *21*xxxx numbers from the U/SIM but I don't know if the speed dial will link to it...
Gavin.
You might want to look at SKScheMa at www.s-k-tools.com which using a script can make a call. It will give you a shortcut to the script to execute it.
cjb
I have been searching the web for years trying to find the solution to what I would consider is a very simple requirement:
From Outlook on the PC, right click on a contact and dial to a connected Pocket PC via Activesync.
Now, either I am alone in this world, or my search capabilities are flawed. This is a function/capability I used to have with my old Sony-Ericsson & I am missing it badly - yes, I know there is a Powertool that provides you with a "window" to your PPC, but I have found that this is somewhat flakey, doesnt like Landscape mode and frequenly freezes the PPC.
Further, I have enhanced my Access application to perform the dialup via the CPROG.exe, what I am after is the same or similar functionality direct from Outlook... please help!
Is there anyone out there that can help me?
looking for the same
it seems we both live in the same world
Come on guys, are you really telling me there isn't anything out there at all?
err so remind me why one would want to do this other than to write some annoying dialer program?
OK, rather simple, really:
Working from Desktop PC, with PPC connected via ActiveSync and sitting in a cradle - by definition, this makes it a pain to access the PPC.
Current Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact
3. Look at number
4. Lean over desk, usually spilling coffee, or unintentionally moving to another website
5. Try to use Stylus to dial number (or use Intellidialer to access the same contact you have in Outlook)
6. Make call
7. Hope you have put in the right number
8. Call goes to voicemail, throw phone against wall
All in all, a rather cumbersome scenario.
Preferred Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact, or right click on Contact
3. Select number to dial
4. "Magical programme" sends dial request to PPC
5. Make call
6. Call answered, sale made, kids go to expensive Private School and Wife loves you forever
Makes sense now?
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
st3v3 said:
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
Click to expand...
Click to collapse
Did you ever read his first post?
yeah for about 4 or 5 seconds, gave pity and responded for the simple fact no one else did and thought i would show some interest.
at least some of us make an attempt eh helterskelter
Thanks for your pity, but I would prefer to know what, if anything, is out there. Obviously, I was mistaken in believing this was the font of all wisdom and exciting development in the PPC world. I truly cant believe that nobody has thought to put this together. Funnily enough, there is one that does this via Bluetooth, but as the XDA Mini wont allow multiple Bluetooth connections, I have been "forced" to find out if there is anyone clever enough to make this happen :sigh:
Hi!
I miss this funtion in windows mobile. This is the only reason why I consider to go back to my old Ericsson.
A little bit strange that it works with other software but not with Microsofts own?
Using .net you might be able to write an app (server) that listens on an open port on the PPC for coms from the active sync pc. When a certial string is sent down this port DIAL(123456789) the app calls the dial command in .net framework.
Maby its time to bite the bullet and code it.
Im having to with another app
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
mlk said:
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
Click to expand...
Click to collapse
Nope this can then be done using windows scripting host cause its the outlook that you need to automate not he PPC.
See the 3rd item on this page.
http://www.cooperstown.net/tips/outlook-address.html
It should be able to help you out just make a custom toolbar button in outlook to call this piece of code and your away laughing.
EDIT:
Where did you fiind the info on cprog. Is there any way it could help with this
Unfortunately, I cant remember where I found the information on Cprog - only thing I have is the "How to call a number".. tried for some time to find various parameters to no avail... not too sure if this will help with your problem.
OK Guys, I finally bit the bullet - thanks Shaun for the "hint" - and coded a Macro to perform this.
It may be a bit clunky and as a "non-developer" I don't have the requisite nous nor software to distribute this as a plugin. For this reason, I have provided this as completely open (as far as I can tell), so if anyone wants to take this further, I hope I have started you on the track and that you wont forget the initial starter!
For those of you that wish to install - you will need to access your \Documents and Settings\<username>\Application Data\Microsoft\Outlook folder and extract the zipped file. My recommendation is that you save the existing one first, just in case you have written a bunch of Macros - wouldn't want to get any nasty surprises here - remember, Outlook only has one Macro bucket and this file is it!
Once you have installed and either provided your own Digital Certificate, or have an appropriate level Security within Outlook to allow this to run, simply add the Macro "Dial2PPC.Dialit" to a toolbar both in Outlook (that comes up in Contacts preferably) and in the Contact Form itself (use "Customise" as you would in any other Office application to facilitate this).
From here, it is as simple as selecting the Contact from your contact list and clicking on the Macro button you have setup - then follow the instructions, make sure your PPC is connected & Dial away!
Please note that you will need to have installed RapiStart from the Windows Mobile Power Toys and that I make no assertions that this is bug free, so use wisely - although, I am pretty sure I have most of the bugs out.
Again, this is provided open & free, so if you make an enhancement, please share it with the rest of us!
Hope this solves the "issue" for you guys as it has done for me!
DialViaActiveSync
mlk – thanks very much for your macro. I’ve taken the liberty of rewriting quite a bit of it (everything other than the part which communicates with the device, really), and have made it available under the GPL v2.0, in order to preserve its “Free” status.
In terms of changes, as I say, I’ve rewritten most of the back-end functionality. In particular:
1.) Adding items to the listbox – this now only shows fields which have a valid phone number, so there are no empty spaces
2.) Dynamic resizing of the form
3.) Form and “Dial” button captions show the name of the contact
4.) Where a contact has no valid phone number, a dialogue to this effect is shown
5.) You need to select number from the listbox before the “Dial” button is available
6.) You can double-click on a number in the listbox to dial it
7.) General tidy-up of some of the variable names, and removed a couple of unused variables
Installing my version:
I’ve exported the relevant files from the Project, so there is no need to overwrite the existing Project file – just open Visual Basic Editor (Tools / Macro in Outlook) and select “Import” and the browse to the relevant folder.
I'm a lurker rather than a poster on here, but, any questions, please do let me know.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Neil,
Champion stuff mate - I have always said it is best to wait for Version 2! Just one question: The ".frx" file, what is that for?
Mark.
It's the binary file for the VB .frm - it's not something you manually import, but it's necessary for the display of the form.
BTW- I've changed the contents of the .zip file for download- realised that I'd left in a line (an extra ResetState call) which stopped the whole thing from working - new version uploaded (same name) should be fine.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Thanks for this, maybe should change my mantra to: Wait for V2.1?
P.S. Thanks for coming out of the lurk!
Nah- v2 was fine... if I hadn't been meddling with it...
Managed to put the reset call before the RAPI argument, which, of course, wiped out the phone number it was trying to dial... Stupid, stupid, stupid -embarrassing, but at least easy to fix.
I guess that the next step is to try and implement SMS via ActiveSync - not sure if cprog.exe handles this, though, so it could be rather more complicated...
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.
Hello folks,
is it somehow possible to edit a number from call history (or maybe even a contact) before calling / dialling (eg. change the suffix) with HTC HD2 (or Windows mobile in general)???
Even my stoneage Nokias could do this... Very helpful feature if trying to call different numbers (suffixes) in one company or after mistyping a number and noticing it after hitting the "Call" button (you could then take the number from history and correct the typo instead of re-entering the whole number).
I found no way with my top notch HD2 to perform this simple task. Any tricks at hand? Any (simple, probably free) apps that may help?
(Is there anyone at all who shares my need? )
Thanks for your help!
surprisingly enough, and ridiculously enough, as far as I've tried until now, that's not possible, unless you keep the number in your head and type it in the dialer, or copy/paste the original number inside a fake contact, and edit it there in order to call that contact later.
Nothing even by far anything similar to copy/paste is possible in the dialer, not even with quickmenu
Thanks ephestione for your sympathy, pity that there seems to be no solution!
Creating a dummy contact would be a kind of workaround but no simplification. Re-entering the number would then be quicker and less complicated.
Another strange flaw of the "Phone dialer screen" I just noticed is that you can not even really edit the number you just typed in at any position (by placing a cursor). You really have to backspace-delete the whole number until the typo and re-enter it from that position on! How "smart" is that?
(For my not-so-smart old SE k800i this was one of the easiest tasks and I never expected this to be a problem...)
Certainly this problem is caused by the different concepts of "touch" or "keypad" interfaces. With a keypad selecting an item (eg. a number in a list) and then doing something with it (eg. dial or select a "use number functionality" via menu) are separate things, while in touch interfaces selecting and executing often (mostly) is one.
But in many situations this is inappropriate at least. The distinction between a single tap to select and a double-tap to execute (like known from the mouse) seems to be the better approach when there are several different things you might want to do with an Item (like here)!
Anyway, is there no one else missing a "edit number before redial/dial contact" functionality?
Anyone else with a solution (app or easy workaround) at hand?
If there is a certain demand I would even try to write my own app! Unfortunately I have absolutely no experience in programming for WinMo and accessing functions there...
Could someone suggest a good introduction to WinMo-Programming? (Or maybe anyone of the experienced developers here is keen on doing the coding? )
My idea:
App functionality:
Possibility to edit phone number selected (tapped) from call history before redialling starts
Possibility to edit phone number selected (tapped) from contact before dialling starts
App features:
Suppress dialling after selecting (single tap) a number from call history or contact (or anywhere else), instead paste the number to the "number field/row" in the "Phone dialer screen". The number could then be edited using the "backspace method".
A number could then be dialled as usual by double-tapping the number. (Tap/double-tap functionality may be switched)
>>> At least great for suffix editing. Looks quite easy to code to my unexpirienced eye...
On the "Details" tab for a contact (or a number from history) provide a button to the right of every "Call ..." entry (just like the "select number" button for the "send message" entry) with a "use number functionality" wich just pastes the number to the "number field/row".
>>> Surely needs accessing HTC Sense. Looks challenging.
Maybe also provide such a button in call (history) lists...
>>> There already are two buttons in these lists...
Make "number field/row" fully editable by providing a freely placeable cursor.
>>> No idea how to do this. May need accessing HTC Sense? Looks very complicated.
Feedback welcome!
It is simply SICK that this functionality does not exist by default. No wonder the head of win mo just got sacked! /P
I desperately need this editing function as I travel overseas a lot and ther are a lot of IP dialing facilities where one just has to enter a specific number before the main phone number, eg if in Singapore and using M1 sim card one just has to dial 021 + country code + tel number. (021 is not an international dialing code, its just a cheaper way to make international calls)
I was able to do this in my 10 year old phone but ever since I've moved to WiMo such a basic feature is missing.
I am missing it also very much!!! Tried to use the note function but it did not work ... It would be really great if someone might be able to provide a cap-file to improve this great mistake of wm!! Or anything else - any ideas are appreciated!!!
blaster88 said:
I am missing it also very much!!! Tried to use the note function but it did not work ... It would be really great if someone might be able to provide a cap-file to improve this great mistake of wm!! Or anything else - any ideas are appreciated!!!
Click to expand...
Click to collapse
The only thing I can think of, is a phone suite software from Inesoft.
http://www.inesoft.com/eng/index.php?in=phone.html
New version 6 has been released with updates.
I have attached some info in their user manual.
Apparently, it seems they have addressed this issue.
I have read a number of forums and people with HD2, liked this software.
Hope this helps.
ps. I haven't tried it, as I hadn't had a need. But I think I will give it a go, as my needs for international dialing are picking up. I have SPB phone suite, and it is almost useless.......so give that phone suite a miss. I also had phone alarm and it won't solve the problem either.
Oh, and I forgot their was PhonEx. Ver2.2 is the current one.
http://www.iconsoft.com/?language=en&menu=62e094db10fc83b1
They also have a feature to edit and add, special format numbers, which can be used when dialing intl numbers etc....
I have attached their info as well.
You would have to do some research and see which one would suit your needs better, and your device, between PhonEx and Inesoft.
Good luck.
Edit: I think between the two, PhonEx has a better dialer.............Just my two cents.......but check it out for yourselves.
just had a quick play with this, with the aim of taking a number from call history, editing it and dialing the edited number.
here's how.
from phone screen, choose number in the list by tapping the icon on the right, which calls up the history sub tab for just that number, (or the details page if it's a known contact), slide to the messaging sub tab and press the hardware send key, this loads the number into the dial screen, but doesn't dial it. now choose menu, save to notes, edit the number, select it, press and hold, choose copy, jump back to phone screen, hit menu and paste is now an option.
voila, new number just waiting for you to hit dial.
samsamuel said:
just had a quick play with this[...]
Click to expand...
Click to collapse
the whole procedure sounds like the neverending story, as it would require more time than to memorize the new number and type it in
Anyway, what I have to thank you for, is pointing me to the fact that there is indeed a "Paste" item in the menu! I don't know how I overlooked that
So well, regarding my need, which is not actually editing the number before dialing but rather copy the number off a calendar entry, you just saved my day thank you
heh, glad it helped, and as usual, teh explanation takes 10 x longer to read than the process takes to do, its a 10 second thing once you know it. The downside is you end up with a pile of notes you dont want.
Not quite as simple as I would have liked but as long as it got the job done, it'd be fine. Except.... Arrrgh!
Everything is OK up until the number is displayed in the dialler. I then hit the Menu softbutton and select 'Save to Notes'.
This opens up a note, BUT (and its a big but!) the number is not pasted into the note.
If I then select Menu from Notes, the Paste opton is greyed out. If not then it just pastes the last thing I copied, which is not the number!
Help!
well it used to work! mine doesn't now either, i recently started using parts from the 3.14 rom, something must have changed.
what rom you on?
Whoops! Appologies for the late reply.
I'm on ROM ver 1.66.405.2 (76641) WWE
OS ver 5.2.21869 (21869.5.0.82)
Manilla ver 2.5.19211619.0
Hope this helps.
Edit before dialing...
Good news!
This software can help....
I started using this from Windows Mobile 6.0, then 6.1 and now 6.5.
I am using it in HTC HD2 before and after new Rom 3.14.
It works perfectly. However, you need to use traditional microsoft contact screen. You need to switch from HTC sense contact to traditional microsoft contact. It is very easy. You can also preset some prefix codes as shortcut.
Good Luck!
The software LoneTear PhoneHelper 1.2-Edit Before Call or SMS
This is quite old software but it works perfectly in HTC HD2 running WinMo 6.5.
This is the link:
http://www.lonetear.com/PhoneHelper/default.htm