I was wondering what people do to turn the backlight back on during a call if it turns off after its set amount of time. Was wondering because sometimes when trying to get to menu's or ending a call i end up putting the call on hold or mashing other buttons when trying to figure out where to touch on the screen, But i haven't really messed around with anything else.
I understand that its a strange question but I'm relatively new and just trying to make things easier with my new phone.
I just slightly move the scroll wheel. Another way is to touch the dpad up or down.
I also just figgle the scroll wheel, it works perfectly
Related
Hi Guys.
I had a quick search for this but other than posts about the button lock "when off" thing, which I have enabled, I can't find a fix for this, what I consider to be, bug/fault/failing.
The thing which really really gripes with me is the dumb buttons all around the edges of the Universal. Sure, when the phone is off, they are disabled, but what about when the phone rings ?
I grab the phone but have to try to dance around any and all buttons because as soon as it gets a call it wakes and the buttons become live.
I've had to forget having the phone in it's case (I tried a krussell case for it but it stresses the screen hinge) because you have to wail away on the keys in order to get the thing out the case.
I could assign the functions of the buttons to <none> but it kinda negates them even being there.
A way to disable them when off and also on call receipt would be just the ticket.
gee, I really hate this aspect and if I lose another call I swear I'll throw it out the window.
I dont really understand your concerns.
I use button lock, and they do lock without a problem.
When my phone rings, the phone call buttons are active to accept or decline.
I also use the krussel case and didnt find any hinge stress, and had easy access to the answer and hangup buttons located on the hinge. mind use, i usually keep the clam closed so i had not problem accessing any of the buttons, ever.
I have also extended the ring time from the 10second default to the 30 second maximum available, so I am not in any rush to answer the phone in the first place, and dont need to visually see who is calling as I accept all incoming calls, or decline all incoming despite who it is. so simply pressing the green button located on the hinge is easy.
so alas, I dont understand your problem.
But when your phone rings, the other external buttons are also active, camera etc. So, when dragging the phone out of a pocket or it's case, you are almost bound to catch one of those butons or, as has happened, the Red call-end button on the side.
marcuskeeler said:
But when your phone rings, the other external buttons are also active, camera etc. So, when dragging the phone out of a pocket or it's case, you are almost bound to catch one of those butons or, as has happened, the Red call-end button on the side.
Click to expand...
Click to collapse
I tested this on mine and whilst you are right about the buttons being active, the phone answer/ignore window stayed foremost regardless. In my case i tested a button I have assigned to notes and the notes window appeared underneath the call window.
As with previous comments I really don't see the issue as anything more than trivial, especially considering the buttons size and pressure required to activate it. Perhaps someone will (or has) write a little utility to disable the buttons except for the phone answer/ignore. In the meantime I wouldn't worry about it.
Using a SPV M5000 and keep it in the leather/elastic holster provided with the phone, and have the same problem with loosing calls whilst extracting the phone from the holster. My rings before going to answer service is set at 30 secs, and that makes no difference.
Just need to find a decent case which doesn't interfere with any of the buttons.
sipat said:
Using a SPV M5000 and keep it in the leather/elastic holster provided with the phone, and have the same problem with loosing calls whilst extracting the phone from the holster. My rings before going to answer service is set at 30 secs, and that makes no difference.
Just need to find a decent case which doesn't interfere with any of the buttons.
Click to expand...
Click to collapse
You could try this case. I loved my previous xda2 case and this is the closest I could get with a belt clip. Phone rings, I unclip, check the green (middle) phone button, press and answer. Finish and press red (end) phone button and reclip.
BTW I'm not at all related to the vendor.
About 1/2 of the time that I pull my jamin out of my pocket when I'm getting a call, I hit a button of some sort which shunts the inbound call to voicemail. Very very annoying.
I have my buttons all on the locked setting except for power, but when the phone rings - all bets are off and every button is live. Bad design.
Thanks in advance!
I too had the same problems ...I just get the photo framed and what happens .. I press the power botton and turn the thing off! Very annoying.
but you do eventually get used to remembering to not pick it up by the sides wher ethe buttons are.
Buttons
I asked the same thing last week (see link). The suggestion did sort of work, but was not slick enough for practical use. Would be nice for a proper solution (such as the 'menu*' on the Nokia).
http://forum.xda-developers.com/viewtopic.php?t=41956
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
Hi there,
I am a little ticked off with the way the phone switches the light off and you HAVE to press a button to get it back up when in the middle of a call.
Is there any way to keep the phone awake while on a call? Ofcourse, I HAVE tried out "Shake Awake", but thats a little buggy too.
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button. Is there any alternate dialler available or something which can get all these options on the screen while on the call like the iPhone as its easier to use it than press the button to get the options?
just install keepscreen.
edit: this will keep the screen alive. about the alternative dialer i don't know. but be aware that the phone has no proximity sensor, so you are prone to accidentally press random buttons.
Cool. Will check it out man. Thanks.
I have a different problem - since, sadly, Hero has not got a proximity sensor, I constantly drop my calls by accidently touching the end call button with my cheek. I believe that's a reason the screen backlight goes off so quickly during a call - when the screen is off, it does not react to touch too, so that accident call drops would be less likely.
There are still some serious problems though. First of all, screen timeout during a call is not short nough - while you can know that you must wait a few seconds before you can actually touch the phone with the face, others can't, so call drops are, sadly, unavoidable in such cases. The fact that hold, mute and other buttons are hidden under the menu button is a good thing not only because it keeps Android phillosophy straight, but reduces chances of unwanted misc. actions. The solution of this problem could be an option to disable the end call button, since there are dedicated hardware keys for that.
I have also noticed that if you minimize the dialer during a call with home button, the screen timeout will not be quick, so before continuing a call it's a good idea to bring the dialer back by tapping the hardware call button so the screen timeout becomes quiick again.
Very true. I thought about all these before I posted, but on the other end, I just said 'f it' to myself and asked it here.. hehe.
I wonder if iPhone users have such issues.
As someone in this forum mentioned, it is best to have the screen switched OFF during a call, unless you have something to do. This way, it prevents you from fiddling with the controls.
Not just the hero, earlier models too have this feature. It quite odd in the beginning, but you will love it later.
subhramani said:
Hi there,
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button.
Click to expand...
Click to collapse
Not necessary!
During a call
- Press "Call" to hold (will also mute)
- Press and hold "Call" to activate speaker mode.
i have searched around and haven't found quite what im looking for. i find my phone screen is turning on in my pocket and sometimes unlocks. i hear the sound of it unlocking all the time just from the pressure against my leg. i keep it so my screen is faced in because of what i do for work i could easily smash it against something. i have bought a case that helps prevent the side power button and the home button from being pressed but still happens quite often.
what i am looking for is an app/mod that will keep the screen from coming on when the proximity sensor detects that it is in my pocket. this would need to work regardless of whether home/power buttons are pressed or a notification wakes it.
if anyone knows of something like this for our phones i would much appreciate it.
Don't have that app/mod, but you may be interested in this one instead. Killing the home button's ability to wake up the phone. I did this on my S4, although you only need to modify the one file, the gpio-key.kl. You need to be rooted:
http://forum.xda-developers.com/showthread.php?t=1702675
Thanks ill give it a try and see if it cuts down on screen on time. I have noticed that ill get notifications and phone calls that will turn the screen on and then simply walking will be enough to swipe and unlock. This screen is much more sensitive than my old epic.