[QUE] How to get Cell information? - Networking

Hi guys,
is there any way to get cell broadcast information on my wm5? I want to see broadcast message.
I read somewhere in this forums that it is possible by going to Start > Settings > Phone > More > Broadcast channel but I can not find any More tab on my phone settings.
Also I use Cell profiler 2.0 but each time I run it I got Failed to connect Com2: error.
Is it possible to get cell broadcast information throught GPS settings?

? no one ?

here is the screen shut from my phone setting in control panel there is no "More" tab.

no idea guys?

Related

Smart Application .NET

I am trying to write some code in vb.net for smart Apps...
the project is very small i am trying to access the PHONE Settings of my Qtek S200 and make an application that the user hits a button that search the network of GSM... The reason i am developing this app is because
when the S200 loses the network signal it will find it again in 15 -20 minutes
but if i go to settings > phone > network > and hit the find network button everything is ok the network is back...
so i am trying to make a project that searches the network
is there any vb.net examples to do something like that ??

How to NOT allow calls while on EVDO?

I am wondering if there is any way to send all incoming calls to voicemail when I am using PDAnet to get online. I know there is a PDAnet setting to "allow calls when connected" but even if I uncheck this, calls still come through and discconect my internet.
The reason I'm posting this here is because if something specific to PDAnet isn't available, or possible, is there anything that I can do to the phone to not have incoming calls disconnect my internet connection? I had a Motorola Q for a little while, and there is a "bug" that actually does this automatically (sends call to voicemail while on EVDO). It was a setting in the DEBUG menu, in the field test option, called DDTM, and it was by default on (I think), and so people had to change that to off (could be switched) to allow incoming calls. It was perfect for me though. Now, I think I tried looking for a DDTM setting in the mogul and I had found it a while back, but I dont think it did anything with regard to my situation. So my questions are:
Is there anything with PDAnet that I can do besides the setting I talked about? Registry or something...?
If nothing with PDAnet, then does anyone know how to change the DDTM setting on a mogul? I got into the DEBUG menu (##33284#) and I didnt find any DDTM setting there.
Besides the DDTM setting (since it hasn't worked for me in the past) is there any other method you guys can think of that will do what I want?
Thanks!!
Try going to phone settings > services > mode of operation > change from hybrid to EVDO only.
toneedo said:
Try going to phone settings > services > mode of operation > change from hybrid to EVDO only.
Click to expand...
Click to collapse
Hmm, that does seem to work for my last option. But I cant receive any calls at all when in this mode, so I guess I would have to manually change this each time . Is there any way this entry can be automatically changed somehow with a script or a registry change?
How I dont see mode of operation under services list. This is all I have:
Location setting, Voice Privacy, Network Service, TTY Mode, and Time Sync
Found this on an old thread somewhere.
edit the registry to make that option appear in the services list. HKEY_LOCAL_MACHING\Software\OEM\PhoneSetting
Change HiddenPreferenceMode from 1 to 0
I am on WM6 and the correct registry to change to make the "Mode of Operation" selection appear is: HiddenModeOperationPage (set value to 1 to hide, and 0 to show).
Cheers ...

App or Shortcut: [Settings -> Connections -> Advanced -> Select Networks]

Hi,
Phone: HTC Touch Diamond (P3700)
OS: WM6.1 Professional
I'm new to the forum, sorry if this had been covered already, I tried to use the search, but couldn't find anything.
Basically, what I'm looking for is an app that allows me to access the Network Management quickly so that I can switch the connection settings from the provider's to My Work Network or another without going through [Start -> Settings -> Connections -> Advanced -> Select Networks] every single time. Or perhaps a way to create a shortcut instead?
I'm looking for this because I need to change it when I'm at home or on the road. At home, where WiFi is available, I always change it to My Work Network on both Internet and private network settings to ensure that I'm not connecting through my provider. And when I'm on road, I'd change it back to my provider's settings so that I can access their free websites.
Thanks.
Ok, after some more research, so far the closest thing I found is making a shortcut to Windows\remnet.exe.

Deactivate data connection on HD2

On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
I am also looking for an app that can do this.
I'm off abroad in a couple of weeks and I am already having nightmares about the bill I may have when I return if I can't find a way to deactivate the data!
pkchips said:
On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
Click to expand...
Click to collapse
Just use the same app
Grtz,
Degake
there is a app out there called...................nodata
oh, are you sure it works on the HD2?
nodata works fine but i use bsb tweaks to disable data connections manually before crossing the border so i can enable it just in case
Since I have no data plan with my carrier i disable connections not referring to WIFI alltogether, I just go to Settings, connections, menu, connections, advanced, select network, and put "work network" (or something, I have it in italian) to both.
pkchips said:
On my Diamond, I had a handy little application called NoData which deactivated data connections so that I didn't get charged for using mobile internet by mistake.
Is there any way to do the same thing on the HD2?
Thx.
Click to expand...
Click to collapse
there is a vey simple way to deactivate the data connection: long press the on/off key and you will get a little menu: one of the menu items is deactivate data connection. Press it and it's done.
kuzibri said:
there is a vey simple way to deactivate the data connection: long press the on/off key and you will get a little menu: one of the menu items is deactivate data connection. Press it and it's done.
Click to expand...
Click to collapse
That terminates it, but it doesn't stop it coming back on when an app tries to use it.
Is there a reason that no-one has suggested airplane mode?
no cab needed, the answer is on the HTC site:
How do I disable my 3G/GPRS Data Connection?
Follow the steps below to ensure that your phone will never connect to a GPRS/3G Data Connection.
1. Go to Start > Settings > Menu > All Settings > Connections > Connections
2. Tap Add a new modem connection > then under Select a modem, select Celluar Line (GPRS) > Name the Connection "Offline" >Tap Next.
3. In the Access point name text box input "Offline" and tap Next.
4. On the next page tap Finish.
5. On the second Connections Menu, tap Manage existing connections and select "Offline" then click OK.
Re-enable the data connection if you want to connect to the internet via 3g/Edge.
1. From the home screen, slide to the Settings tab, Wireless Controls > Data Connection.
2. Select your Country and Operator
3. Tap OK.
4. On the subsequent screen, tap Yes.
The phone will automatically configure itself with the appropriate settings.
Note: When disabling the connection in this way, your phone may report errors when trying to connect to "Offline." The error is caused by the phone being unable to connect to a data source due to the settings, and is normal.
traianescu said:
no cab needed, the answer is on the HTC site:
How do I disable my 3G/GPRS Data Connection?
Follow the steps below to ensure that your phone will never connect to a GPRS/3G Data Connection.
1. Go to Start > Settings > Menu > All Settings > Connections > Connections
2. Tap Add a new modem connection > then under Select a modem, select Celluar Line (GPRS) > Name the Connection "Offline" >Tap Next.
3. In the Access point name text box input "Offline" and tap Next.
4. On the next page tap Finish.
5. On the second Connections Menu, tap Manage existing connections and select "Offline" then click OK.
Re-enable the data connection if you want to connect to the internet via 3g/Edge.
1. From the home screen, slide to the Settings tab, Wireless Controls > Data Connection.
2. Select your Country and Operator
3. Tap OK.
4. On the subsequent screen, tap Yes.
The phone will automatically configure itself with the appropriate settings.
Note: When disabling the connection in this way, your phone may report errors when trying to connect to "Offline." The error is caused by the phone being unable to connect to a data source due to the settings, and is normal.
Click to expand...
Click to collapse
that's what bsb tweaks does, but with one click.
d3l1 said:
that's what bsb tweaks does, but with one click.
Click to expand...
Click to collapse
in case you dont feel like installing bsb tweaks, get nodata here
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
This is what i want to know. How can we auto disconnect data connection after certain period of time. For example if i set up my device to update weather every hour using EDGE, it wont disconnect automatically but i want it to auto disconnect once the weather is updated regardless of i notice it or not. How do we achieve that?
Hello, I have installed the modaco no data app and it works a treat.
yusufjee said:
This is what i want to know. How can we auto disconnect data connection after certain period of time. For example if i set up my device to update weather every hour using EDGE, it wont disconnect automatically but i want it to auto disconnect once the weather is updated regardless of i notice it or not. How do we achieve that?
Click to expand...
Click to collapse
Why not give this a try? http://forum.xda-developers.com/showthread.php?t=286844&highlight=bandswitch
Thought i'll post a qn here instead of starting a new thread:
Is there any way to allow data connection for just one application in hd2? disabling all others?
I want just IM+ to have data connection but not others like weather update,stock update etc...
any ideas friends?
An application having the same functionality of the famous MoDaCo Nodata but with Manila touch screen interface!!
http://www.redfrogfish.com/data-controller/
sevoflurane said:
An application having the same functionality of the famous MoDaCo Nodata but with Manila touch screen interface!!
http://www.redfrogfish.com/data-controller/
Click to expand...
Click to collapse
Thx...but its only showing 3 connections:mobile TV,MyWorld and MMS.
IM+ is not there although its running.
disabled data but now cant connect to wifi
Hi,
I've disabled my data connection using the HTC mehtod but now when I've connected to wifi, I keep on getting an error message say page cannot be displayed and there is a problem with my connection?
Can someone please tell me if I've done something wrong? and if this is suppose to happen?
Thanks,

Set Wifi as default connection?

Hi everyone,
im a newbie with WM (formally Symbian) and i have a question regarding setting my wifi as a defaut connection whether checking email, browse internet, update my weather...and the etc. is there a way of setting it? everytime i try to update my weather or any internet connection it keep trying to connect to the phone data connection which i did disable and ofcourse it tell me there's a problem with connection.
Any help would be appreciated
Drew
settings menu all settings connections connections advanced select networks top dropdown select "the internet" or maybe my work network(I forget what it says).you'll get it when you see
Works perfect - thanks bunch!
Question: Can I somehow setup my device that after I click to update MyWeather automatically connects to WiFi vs clicking ToggleWiFi button?
sorry, no clue.like auto on wifi. should think so if you look hard enough.

Categories

Resources