Dears,
my first REAL contribution to the forum
Please find below the link for my new 4 sided custom made cube based on the iCube by musicman
V1
Cube Of Life @ Rapidshare
Cube Of Life @ zSHARE
Cube Of Life @ Uploading
V2
Cube Of Life [email protected] Rapidshare
Cube Of Life [email protected] zSHARE
Cube Of Life [email protected] Uploading
Installation instructions
----------------------
1-un-install any custom cube you have ( soft-reset so that the cube you have is the default one)
2- copy the registry and cab files onto your phone
3-run the registry file and import the settings
4-install the cube by running the CAB file
5-after the soft reset you'll get the 4 sided cube of life
6-enjoy
will upload a you tube video later today showing the animation of the cube
hope you like it
*tested on the HTC NiKi
-------------------------------
It's not what you say that defines you, it's what you do
Thanks for the contribution. It would be great if you could add screenshot too.
xmanq8 said:
Thanks for the contribution. It would be great if you could add screenshot too.
Click to expand...
Click to collapse
Done ! though the screenshots are worst than the real animation by FAR !
i added a link from the HOWTO post. hope you don't mind.
pp18 said:
i added a link from the HOWTO post. hope you don't mind.
Click to expand...
Click to collapse
surely i don't mind
did you try it ?
how can i make a gif animation of the cube ???
Hello ahmad.yousry. cheers for your work with this theme. I have a possibly stupid question. u know in your step to import the regisrty settings could u possibly be a bit more specifc - i.e. i dont know how to do that. im a newbie here and the touch dual is my 1st ppc.
i have copied the biotouch registry key to my memory card and the cab file.
i have PHM registy editor on my phone.
cheers for ur help
p.s. i have a 3 sided htc cube on my touch dual - does that mattter?
just open the registry file from your explorer
no problem about having a 3 sided cube, this is supposed to turn into a 4 sided 1
But this uses not the original Cube.
Therefor u end in a much worse usage.
U can also alter the original Cube by adding new page.
On my XDA Star already was a second Launcherpage.
It's only a copied and renbamed APLauncher.exe (CustAPLauncher.exe),
new registry path under Biotouch (also named CustAPLauncher.exe)
and new Images.
A Member at the german community ppc-welt.de even realised a 3rd Launcherpage that way.
Completely new at this have registered the bio-touch and installed your cab file but when I activate the cube I see your images for 1 second then the old image appear when I scroll left or right this also happens. Can you please help me?
Cube of Life depends on iCube. have you installed iCube before this?
Now that i have all installed, can anyone kind enough to post step by step explanory on how to add or change applications(inclusive of 3rd party installed software) in the cube?
@dlsw
maybe you can read this thread as start
Hello Ahmad.Yousry.
Thanks for the excellent work you've done.
can you please liste the un-installation steps as you listed the installation ones?
Thanks,
pp18 said:
@dlsw
maybe you can read this thread as start
Click to expand...
Click to collapse
wow! cant really understand it! I guess I will just have to do editing the original path to the path of the programs which I want. By the way, what is the fastest way of find the path of the programs in my phone
How 2 uninstall Cube of Life?
Please, give me some instruction for how can I uninstall this app? I tried WM uninstallation application and SK-tools -- the Cube and its icons are still there. What should I do step by step? Please help!
3-run the registry file and import the settings
4-install the cube by running the CAB file
when try to run the reg file i get the following message:
"There is no application associated with 'Biotouch' run the application first then open this file from within the application
Related
Hi
Just thought I'd post a wee thread here to let you know that I've now completed the new version of this app which lets you customise the HTC touch cube, and now also select your own custom weather location.
The CAB / support thread is at:
http://forum.xda-developers.com/showthread.php?t=324556
Screenshots below.
Carlos
hey
i put the cab file on my cingular 8125 with the NBD 8.0 rom and when i go to install it it says "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
oh sorry i didnt remove the thing in the startup folder works greats now
Great, thanks for sharing!
This is great work! However, I do not know where to find new icones. They are *.png extentions but how do you create them for different programs?
Thanks again for this wonderful work!
Daniel
I friends,
in this days, i flash many new rom´s, and i have a lot of programs like PocketCM with the (zip version), iContact, etc.
Programs not in a cab install version, but only simple *.exe files placed in memory card.So, in order to flash a new clean rom and few minutes later i have all my stuff again ready only using shortcuts in QuickMenu and SPB Pocket Plus
I deside to start this tread for everybody post here some exec. files direct from card.
I have some that i upload here later.
Lets make a large collection in your ppc´s without use so many memory, let´s stay whid a clean roms
Congratulation to developers that made software in exe format, simple and clean.
Lets star.
Heres My Contribution
1. Pbar
2. DicNobar
3. PPCPIM Backup
4. Regedit
5. vSnap
6. psShut XP
7. Glossy Black Bars
8. Clear Temp
9. Adobe Reader LE
10. X-Ray ( for fun Only )
11. VistaHide Battery Gauge
12. Fast Cleanup
Download All of Them In a single Package Here
problem
hey marcos, the only problem is that probably not all the peeps here can remember if the progs are c$%#ed or freeware,shareware, bought etc.... i have a 4gb sdcard and there are not less then 250 programs in exe's on. most c%^%ed ....see the problem!!!???
Mark
************
*****************
***********************
***********************
zcink said:
Here's a few:
Click to expand...
Click to collapse
thanks zcink ... it's nice you put them as individual files ... that way we can choose only the file needed instead of a whole package deal ... thanks again ...
hey zcink i hope u dnt mind but please remove the WM Wifi Router...Chainfire doesent wanthis App posted any where now adays
ather90 said:
hey zcink i hope u dnt mind but please remove the WM Wifi Router...Chainfire doesent wanthis App posted any where now adays
Click to expand...
Click to collapse
I removed it -- sorry -- didn't know.
****any others that need to be removed, just let me know.
No problem and thanxx for the Exe's
Thread for *.exe
thanks friends,
I´m preparing my colection to post here,
let´s focus an keep in mind the autors rights, but if is there a problem, just post the name of the app.
very god work , keep this tread on going, thanks for the exe`s
thanks!
I would like to extend all the file that you've shared with us, thanks buds
desa
thanks!
I would like to extend all the file that you've shared with us, thanks buds (zcink)
desa
thanks...
wonder if there somebody would share any bluetooth transfer exe. directly to SD Card....
thanks in advance
Too many PM's -- remove this, remove that, so I just removed them all.
Cheers!
I like this idea thanks for posting I will add more later
till then n'joy the one I developed VipPIm ring tone version 5.5 to assign ringtone based on Category.
Hi all,
I have developped a small plugin for TL 0.9.3 that will display the birthdays to come on any page.
There is no cab installer yet, I will try to find out how to make one if someone may ask for it.
It is my first try to developping in c#, so it may be bugged...
Please report any comment / error you may have
[09/03] : No more ini file. All the configuration is made through params in xml file. See ReadMe.txt in zip file for details.
Thanks.
I'll give it a look.
screenies?
Fresh2Death said:
screenies?
Click to expand...
Click to collapse
+ 1
gratzi!
Screenshots
JstarLuvsTina said:
+ 1
gratzi!
Click to expand...
Click to collapse
Screenshots added
Congrats!!
Hi!!
First of all thank you for developing a plugin for throttle . I've tested it and have a little issue:
- You're searching for the fixed path by using \Program Files\ThrottleLauncher\Plugins hardcoded... This has make plugin crash on my device as I have an Spanish ROM and path is "Archivos de Programa" instead of "Program Files". Also user's can have Throttle Installed on their SD card. The simplest alternative to take the path that will solve this two problems. Add a parameter to the throttleplugin:
Code:
<throttleplugin name="ThrottleBirthday" path="#$THROTTLE#\Plugins\ThrottleBirthday\ThrottleBirthday.dll" height="25" class="ThrottleBirthday.ThrottleBirthday">
<param name="path" value="#$THROTTLE#\Plugins\ThrottleBirthday\"/>
</throttleplugin>
Also you can get rid of the ini file by using params:
Code:
<throttleplugin name="ThrottleBirthday" path="#$THROTTLE#\Plugins\ThrottleBirthday\ThrottleBirthday.dll" height="25" class="ThrottleBirthday.ThrottleBirthday">
<param name="font" value="Arial"/>
<param name="size" value="10"/>
...
</throttleplugin>
That way people developing setups for throttle can parametrize your plugin so it can be configured through the main ConfigDialog of the setup by using:
Code:
<param name="font" value="#@ThrottleTodayFont#"/>
Now... as you are the first developer for plugins for throttlelauncher may I ask you how it was? Did you encounter any problems or lack of documentation?
thank you very much again!!
If I could do it...
Hi APBilbo,
First of all, thanks for the tips, I will do my best to apply them for the next version
Regarding the difficulties I had, I started from your HelloWorldPlugin and learned C# from scratch, and well, asides from the problem of getting Throttle directory, it was quite a piece of cake.
It was a pleasure (and a great fun !!!) to develop a plugin (as simple as it may be) for your Throttle, as this app is for me a good representation of what a pocket pc app should provide
I will be on vacation next week, but I was curious about developping a ThrottleCal.0.2...
Be sure you will have news from me
No more ini file
Hi all,
Thanks to APBilbo' advices , there is no more ini file, only params in the xml file, and it should work on any region ROM (no more hardcoded silly path ).
You may check the Readme.txt in the provided zip file for details.
malrok37 said:
Hi all,
Thanks to APBilbo' advices , there is no more ini file, only params in the xml file, and it should work on any region ROM (no more hardcoded silly path ).
You may check the Readme.txt in the provided zip file for details.
Click to expand...
Click to collapse
Thanks . Keep up good work . And enjoy your vacations!!
Just dump the VGA bitmap and dll files from a chinese Diamond ROM[http://www.5dpda.com/bbs/thread-22603-1-1.html]
Cab modifed from phonecanvas qvga version[http://mbarvian.freehostia.com/2008...e-applications-cab-and-oem-package-included/]
Usage:
1. Try the [Diamond_PhoneCanvas Patch_Eng.cab] first.
2. If [Diamond_PhoneCanvas Patch_Eng.cab] doesn't work, try extract [Diamond_PhoneCanvas Patch.zip] to /Windows of your devices.
3. If it still doesn't work, try the new [Diamond_PhoneCanvas_full_Eng_without_battery_icon.cab]
Notice:
1. Doesn't work on CDMA ROM.
2. You should enable PhoneSkin.
3. Test on dutty's 3.6b Lite ROM.
ChangeLog:
-Remove 0804 mui files
-Change fonts size of buttons during calls
Any feedback is appreciated.
Anyone who want to translate the text, plz use Reshack to modify the mui files such as phcanrc.dll.0409.mui.
If you like to remove "Slide to answer/Ignore" on incoming calls, plz use this files make by BlockbusterF. [http://forum.xda-developers.com/showpost.php?p=3089528&postcount=73 ].
About how to edit/translate "Slide to Answer" Text, plz refer to BlockbusterF post at http://forum.xda-developers.com/showpost.php?p=3091058&postcount=108. It's a German Version.
Thanks to dane for this black slider http://forum.xda-developers.com/showpost.php?p=3091980&postcount=131, and also daddyload2 [http://forum.xda-developers.com/showpost.php?p=3089616&postcount=75 ]
Thanks to fiendz for another full cab http://www.megaupload.com/?d=JZRBG9JE. anyone who can't use my cab, plz try fiendz's cab.
Thanks to herg62123 for all in one cab with Slide to Answer + Curtain http://forum.xda-developers.com/showpost.php?p=3103295&postcount=244
Thanks bro.
EDIT: Where's the Diamond_PhoneCanvas_full.cab??... I saw it just before I had wrote my post... I promise XD.
This is great, but the links are dead??? I really like the look of this...
I am sorry, the previous cab has some chinese text in it.
I am uploading the new one
I get an error: The cab cannot be installed. Tried both cabs
dobb said:
I get an error: The cab cannot be installed. Tried both cabs
Click to expand...
Click to collapse
...same here!
cyron_at said:
...same here!
Click to expand...
Click to collapse
Same ...
same here!!!
maybe the problem is that we are using stock ROM's. I've found on some other forums other users experiencing this kind of problem, and all of them are using stock ROM's :S
I am using Dutty's 3.6b Lite.
Haven't test on stock roms.
dont' work here either
fico2 said:
maybe the problem is that we are using stock ROM's. I've found on some other forums other users experiencing this kind of problem, and all of them are using stock ROM's :S
Click to expand...
Click to collapse
I'm with XBMOD, not with Stock Rom
Mhh I´m using bElite 0.99 and it doesn´t work for me, too !
just a question here
how is the memory usage of this compared to the stock htc dialer?
Well, I found "phcanOverbmp.dll" can't be overwrite during installing.
I am uploading a new cab without this file.
just a recomendation
you can make the porogram rename phcanOverbmp.dll to phcanOverbmp.dll.bak and then place the new phcanOverbmp.dll in the windows folder..after a softreset we can then delete the phcanOverbmp.dll.bak manually
I renamed phcanoverbmp.dll manually, but again can't install. Same error
The new "Diamond_PhoneCanvas Patch.cab" have uploading. Have been tested on dutty's rom 3.6 lite.
I've installed it. Now testing...
EDIT: It's working! Great work!!
Try the new one. My uploading speed tonight is extreamly slow.
So I can't upload more cab file.
Thanks to GODZSON for support concerning the fonts customisations!
>>Download Here<<
>>for thoose who wish to change the start screen <<
Installation :
Download the zip file on your computer. unzip. put the .teme file on your Diamond into the folder "/Internal Storage/Themes. (if it doesn't exist yet, create it)
Intall the "wallpapers" folder anywhere as you want on your Diamond. Those themes must be installed with TF3D config . Follow the developer's instructions.
To install on of the wallpapers, go to "Settings" tab on the tf3d and choose "wallpaper". The wallpaper only appear one the "Home" main screen of the TF3D.
Can a version be made for the Diamond for HD manila?
Another link please !!!!!!
Great post! Beautiful theme. Can you post just the tray icon files or even a .cab? your instructions are very simple I just don't use/need TF3D config. (I've encountered problems with it in the past). I'm running the stock rom with the old animated manila files over the top (could possibly be the cause of my problems but in a give and take between the two, i take animations). Thanks in advance
y on my touch diamond the weather page it display the temp as ...6 instead of 26?
i love this work, i hade the white 0.1 and thought that was fantastic. dont kno y but i quite like the white one to black but ill deffo check these new ones out straight away
nice work man
i only sceenshots of the theme running touch hd, could u provide screenshots of the theme running on Diamond?
thanks
Really great theme zitoun!
but configurator for Manilla does not work on my device-it can not recognize theme files?!
any other way to install these theme ?
Good luck!
thanx in advance!
drgrabez said:
Really great theme zitoun!
but configurator for Manilla does not work on my device-it can not recognize theme files?!
any other way to install these theme ?
Good luck!
thanx in advance!
Click to expand...
Click to collapse
use diamond tf3d config
@zitioun..weather temp numbers are messed up..great work
Same question like my friend (zmob123), is it possible to make this theme to work in Xbmod HD manilla in Diamond
one question. How can I uninstal pictures with money box?
wow that is really nice, probs the best iv seen for touchflo thanks
Thanks again man, these ones are amazing! Think they might be your best ones yet!
When i can afford it a donation is on its way to you!
magic1972 said:
one question. How can I uninstal pictures with money box?
Click to expand...
Click to collapse
>>for thoose who wish to change the start screen <<
how can I reverse the TF3d fonts to the standard fonts again???
i have installed the themes and TF3D fonts of Zitoin. I do not like them. but i cannot reverse the installation now.
how can I reverse the TF3d fonts to the standard fonts again???
can someone help me?
thnx
zitoun said:
Thanks to GODZSON for support concerning the fonts customisations!
>>Download Here<<
>>for thoose who wish to change the start screen <<
Installation :
Download the zip file on your computer. unzip. put the .teme file on your Diamond into the folder "/Internal Storage/Themes. (if it doesn't exist yet, create it)
Intall the "wallpapers" folder anywhere as you want on your Diamond. Those themes must be installed with TF3D config . Follow the developer's instructions.
To install on of the wallpapers, go to "Settings" tab on the tf3d and choose "wallpaper". The wallpaper only appear one the "Home" main screen of the TF3D.
Click to expand...
Click to collapse
Install the CAB provided with the archive you downloaded
kucles said:
i have installed the themes and TF3D fonts of Zitoin. I do not like them. but i cannot reverse the installation now.
how can I reverse the TF3d fonts to the standard fonts again???
can someone help me?
thnx
Click to expand...
Click to collapse
There's one cab within the archive file you downloaded, which will restore the font back to original. All the info are in the readme file .
Just remove the "\windows\welcomehead.192.png"
magic1972 said:
one question. How can I uninstal pictures with money box?
Click to expand...
Click to collapse
Just remove the file "\windows\welcomehead.192.png". Or, create your own Welcome file. Do a google for keyword "welcomehead.192.png" and you should be able to find link to readme on how to create this file.
From my vague knowledge on the ROM image, the original "welcomehead.192.png" shall get reinstate once you remove the money box one follow by a soft reset.
how to remove T-Mobile name. my network is not Tmobile
Where can i find the fonts used in this theme (manilla and windows fonts) ???