Help needed HP iPAQ hw6965 - Sable

I am New to XDA-Developers.
My boss purchased an iPAQ 6965 and he is not liking the WM5.
I would like to do two things.
1. Backup the device completely.
2. Upgrade to wm6 or a lighter version of WM5 that will run faster and less
Painful to my boss (and to me ).
3. When I am tring to use itsutils I get the following error:
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
Click to expand...
Click to collapse
I tried to restart everything that came to mind including removing and
re-adding active sync.
I read the threads concerning WM6 and the hp hw6965 device but I do not mind using a non original HP OS.
Since I am very new to this I will be grateful for a reply as detailed as possible.
Have a Gr8 week
Itay

Related

Upgrading to 2003 / Need help with ROM error

I'm new to this forum and it seems like a great resource. I have seen this question answered but the answers are still above my head in terms of complexity. I've got an AT&T branded SX56 running 2002 and an XDA-Developers ROM (I think). It is unlocked, I am guessing through the use of an XDA Developers tool for unlocking. I'm in Colorado and using the phone with T-mobile. My question is this, I'd like to upgrade to 2003 and have downloaded the file to do so from Siemens website for free, which is great. It had some nice enhancements and I thought I'd upgrade to it. So, I downloaded/installed the new ActiveSync v3.71 and then tried to run the upgrade. I got the same message many have gotten apparently saying that the ROM Image is not compatible. The specs are;
current
Model PW10A1
ROM 3.17
English
upgraded
Model PW10B1
ROM A.30
English
In reading through the posts it seems that I need to upgrade the ROM of the device, but I still get lost looking at "cooking a ROM", etc and what exactly I need to do. Making this a little more urgent is the fact that after I tried to upgrade the phone (which gave me the ROM error) my internet connection on the phone (which was working fine) suddenly doesn't work with explorer or outlook on my phone giving me an error "Trouble Connecting; Unable to connect with current settings" even though I didn't change the settings and they look exactly as they did before. So, I feel like I've messed something else up on the phone even though it didn't get to install the whole upgrade.
So, any advice for a novice? Thanks in advance, I appreciate any help you can give.
Best regards,
chefandy
the official AT&T release for WM2003 is an exe file contains both ROM & RSU upgrade, and it aparently designed for PW10B devices (900/1900 MHz).
i think the first part of the faulty upgrade (usually RSU) affected your device ... i really hope not
chech your device info and tell us what's there. if u can still get to the boot loader screen and activesync can still connect to the device, then it's not a severe damage. I think successful RSU upgrade with the right stack would solve it.
I'm not sure what the boot loader screen is, but the device still syncs just fine and seems to be working ok except for the internet connection issue. The funny part is that I can connect to the GPRS connection by going to the connections screen, but then when I transfer to Outlook or Explorer they do not recognize the connection as something they can use.
Is the Siemens upgrade I downloaded (http://www.my-siemens.com/MySiemens...C%2FMC%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html) different from the AT&T upgrade you mention? I also saw there was a T-mobile upgrade to 2003 but it was not available when I tried to download it from tmobile.com. Thanks!
That's great! .. ... It seems I misunderstood your issue ... I thought you lost the RSU part.
I think something wrong happens to the registry values ... you see, there is a reference for each defined connection in the registry which all applications that may require to connect to GPRS or WAP or MMS can refer to.
I suggest that you delet ALL connections and start the setting from scratch ... I can't guarantee it will work since some applications may be required to be uninstalled and reinstalled to use the new connections references (if it has smart uninstaller!!).
The last resort is a hard reset which will bring the registry to the original setup.
Well, I did what you suggested and started with a new connection and it worked :lol: Thanks!
Now I'm back to the original question about whether or not I can safely upgrade to WM2003 or not? Thanks again for all your help.
The answer is YES! ... it's easy to upgrade ur ROM to WM2003 if u know what ur doing.
spend some time reading this forum on how to cook a new ROM from the kitchen ... and it's better to get yourself SD card for flashing and backup.

Himalya WM5

Hey guys,
Newbie here
I have a himalya(XDAII)
Rom Vers. 1.66.00 WWE
Radio 1.10.00
I want 2 know whether i should upgrade to WM5 or not
I mean is it really worth it or not
Can any one help and guide me step by step
[/b]
...
Well the upgrade to WM 5.0 is not so easy and clear (for newbie) as the upgrade for WM2003SE. I mean the additional installations of postinstallfixes,DOCtools,RAMdisk,MMS,etc(all things must be installed separately,while 2003se's ROM is completely prepared). Anyway try the web server made by our King of Himalaya (BL) http://buzzdev.net
it is described there a lot about,or try the discussion board for WM5 especially.
I want to notice you for few recommended steps:
1. what size of RAMdisk do you want to use? (My recommendation is 64/64).
2. flash ROM image patched with current RAMdisk size (Use HimaUpgradeUt_noID)
3. install DOCtools to raise up your Storage space
4. do a hard-reset(for DOCtools)
5. after start-up install PostInstallFixes(shipped in zip with ROM image)
6. install RAMdisk with your preffered size
7. Install MMS
8. beware of installation of old software(some software is not able to run under WM5)
If you will have any question,I can maybe help.
Thanx
wat i really want 2 know is whether upgrading 2 WM5 would be worth the trouble or not.....i mean is the OS really that gr8??
i'm a new user of O2 and dont want 2 fiddle 2 much with my fone coz i might wreck it!!
i'll only do an upgrade if WM5 provides me with some additional utilities otherwise i'm quite happy with WM2003...
...
Well there are 3 major problems with WM5:
-I am still unable to establish ActiveSync connection via USB(you need at least ASv4.0)(I am using BT for connection)
-The camera software is really crap and portation from 2003se is not yet done
-Sometimes there's a problem with phone(call answer,establish,end etc.)
Anything else is really good and better than before. The system is running rock-solid without crashes. The biggest + is that this PPC system is also possible to install(and run)Smartphone applications. Don't be afraid of upgrading. Just beware of bootloader upgrade and you can't wreck it. When the flashing procedure will be unsuccessful,just start the upgrade again and it must working. But read all things carefully about upgrade,what is DOCtools,what is RAMdisk etc. that you can purely understand it.
I've tried it twice and went back to WM2003se twice.
I found it annoying that my camera and record buttons stopped working.
Other than that WM2005 was a nice OS to use.
Pity there isn't a final release for the XDA II.
...
It can't be official for Himalaya,coz the hardware isn't designed for WM5. Especially the memory system(128RAM,32Flash). This new OS has a different memory organisation,that uses Flash for all things including installed software while RAM is used only for running system and apps. Therefore you will need this combination at least:128Flash,64RAM. Himalaya basically offer 128RAM for running(too much)and 32MB as a storage(too low).
...
chazam said:
I've tried it twice and went back to WM2003se twice.
I found it annoying that my camera and record buttons stopped working.
Other than that WM2005 was a nice OS to use.
Pity there isn't a final release for the XDA II.
Click to expand...
Click to collapse
I didn't notice any problem with buttons. It is also working the AEBPlus utility problemless. The flashback know I also. Once tried Magneto,flashed back to 2003se. And again and again and again...coz a lot of problems I've had with the system. Then I've studying buzzdev.net and step-by-step solved problems. Now I have it totally and it's running great.
Hi
I'm running WM2005 at the minute, but want to go back to WM2003SE, as I'm having problems syncing with hardware at work.
Only problem is, since I changed laptops, I can't get my XDA2 to connect with my PC at all! I've tried installing latest ActiveSync 4 from Microsoft site on my home PC (thinking there are fewer things to stop it syncing on the home PC), so that I can go back to WM2003SE.
However, 2 problems:
- 1) still can't make a connection with the PC - don't even have the Code 28 problem anymore (http://support.microsoft.com/kb/264693/en-us) as the system installs a Network Adaptor device driver called "Windows Mobile-based Device"
- 2) once I do connect, unsure of how to go back to WM2003SE - thinking I could simply run the Xda_II_172181_Final.exe ROM file that I downloaded from O2 UK.
If anyone can shed any light, would be greatly appreciated. I'm new to this, so go easy on me!
Would like to be able to continue running with my Vodafone SIM once this is sorted.
Thanks.
...
As I wrote:
>1. I am still unable to connect via USB. I am using Bluetooth. Maybe I need SP2 for WinXP. Don't know. AS4 is using the connection with WM5 little bit differently as 2003se. This connection goes via network connection,not directly. Try this link:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
>2. For flashing another ROM image:Just use HimaUpgradeUt_noID.exe with current OS image file nk.nbf to flash. These files you can download at the FTP of this server. The nk.nbf filename is the same for all ROM images,therefore be sure of version. Copy these 2 files to same directory,put your Himalaya to bootloader mode and start the exefile.
Re: ...
TomasNM said:
chazam said:
I've tried it twice and went back to WM2003se twice.
I found it annoying that my camera and record buttons stopped working.
Other than that WM2005 was a nice OS to use.
Pity there isn't a final release for the XDA II.
Click to expand...
Click to collapse
I didn't notice any problem with buttons. It is also working the AEBPlus utility problemless. The flashback know I also. Once tried Magneto,flashed back to 2003se. And again and again and again...coz a lot of problems I've had with the system. Then I've studying buzzdev.net and step-by-step solved problems. Now I have it totally and it's running great.
Click to expand...
Click to collapse
Hmm...
Perhaps i should have a good read of the buzzdev forums and try again.
Other than that I'm going to be due an Upgrade in fecuary so i might just stick with 2003se and get a WM5 sevice when my upgrade comes. 8)
I'm glad i got the XDA II. I was using a P900 but having a pocket PC phoner seems better for me.
...
Well the WM5 system for XDA II will never have an official release. When I was buying my MDA II,I've had two choises(MDA II vs.P900). Some + was for MDA,some for SE. In total that was two equable devices. I bought my Himalaya due the price was a little bit lower. Now the SE-P900 costs in a second hand 200Euro and MDA II 400Euro. MDA II is much better than P900. The hardware and as well the software. Now I know,that it was my good choice to take MDA II instead of P900. Now when it is possible to use UNofficial Magneto is the Himalaya back on the top.

Upgrade Powermap ROM with Vista 64 (=without activesync) but windows mobility center

Hi Folks,
I tried to upgrade my P3300 to the nice Crossbow looking Dopod P800W rom.
It's an exe file and gives the following 2 problems:
1> Rapi.dll not found (activesync nescessary)
2> Sleep4.exe is not compatible with Vista 64
I tried to install,but cannot due to that windows mobility should take over the activesync function. I also put the rapi.dll in system folder but not solved.
I extracted the Powermap.exe rom and found the powermap .nba file.
Is there any method to put this rom image on my HTC without activesync ?
I wonder if anyone tried to upgrade rom through Vista and had the same 2 above errors and how it was solved?
Powermap rom looks awesome, and maybe a solution for us P3300 owners to enjoy the Crossbow look already. If HTC puts the crossbow rom on their downloadsection it would be great offcourse. Let's hope.
I hope I don't need to put XP again on a partition to perform this rom upgrade or visit a friend. I think the reason maybe is that this powermap rom was made when vista was not released yet. It still is based on activesync.
Thanks,
Innovator
suggest you do your upgrade on Windows XP machine (ie visit a friend). then you can use your device on Vista. i heard, it is technically possible to do upgrading on Vista, but as experience of many people shows it's not a straightforward thing. try searching these forums for "vista" and you'll see what i'm talking about. it's relevant to all devices, not only 3300/ good luck!
Let me remind you guys that there is problem with restoring from backup file on PDAMobiz ROMs (I use Spb Backup). Make sure you have it sync with Outlook on your desktop !!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=295295
EazyVG said:
Let me remind you guys that there is problem with restoring from backup file on PDAMobiz ROMs (I use Spb Backup). Make sure you have it sync with Outlook on your desktop !!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=295295
Click to expand...
Click to collapse
Sprite works well for me

New ROM and no connection (Active Sync)

After intensive reading of this site (compliments!!!), I decided to take the risk and replace the old PPC 2002 ROM version (3.12.07 ENG) to ROMkitchens' WM 2003 SE (3.04.00 ENG) on my XDA1. The upgrading process was without complications and after a full reset (Wallaby bootloader V.5.15 was shown) I happily started with the standard installation procedure.
Unfortunately, replacing the XDA in the cradle didn't realise a connection between the XDA and the PC. ActiveSync version is 4.2, USB as connection is enabled. So, e.g. a synchronisation with Office is not established, nor is it possible to install other programs like TomTom.
Is it possible that there are compatibility issues or just wrong settings????
Any help is greatly appreciated (also via PM). I'am looking forward to be able to use my device again!
Bergerm said:
After intensive reading of this site (compliments!!!), I decided to take the risk and replace the old PPC 2002 ROM version (3.12.07 ENG) to ROMkitchens' WM 2003 SE (3.04.00 ENG) on my XDA1. The upgrading process was without complications and after a full reset (Wallaby bootloader V.5.15 was shown) I happily started with the standard installation procedure.
Unfortunately, replacing the XDA in the cradle didn't realise a connection between the XDA and the PC. ActiveSync version is 4.2, USB as connection is enabled. So, e.g. a synchronisation with Office is not established, nor is it possible to install other programs like TomTom.
Is it possible that there are compatibility issues or just wrong settings????
Any help is greatly appreciated (also via PM). I'am looking forward to be able to use my device again!
Click to expand...
Click to collapse
~
Problem solved! Did cost some time but after input from other Forum I finally reinstalled ActiveSync and that was the solution.
hi i hava th same problem! what can i do? thanks
Bergerm said:
~
Problem solved! Did cost some time but after input from other Forum I finally reinstalled ActiveSync and that was the solution.
Click to expand...
Click to collapse
There have already been the hint....
Stefan

[TUT] HP 91x ROM update (fix bricked ipaq and change from any language to english)

Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal
Good job, thanks!
Will try it out later!
is it still compatible even though my device SKU IDs is not compatible with the update?
Last time i tried i almost bricked my device.
In theory, yes
Actually, like I wrote above.
My ipaq 914c is Italian version.
It means that the SKU IDs of the phone is not not compatible with the update. ( I mean the official update!)
But we all know that there is no difference in the hardware between the ipaq 91x.
So any language ROM versions can be used on the another ipaq 91x phone.
=> WWE ROM can be used on any Ipaq 91x phone.
My Ipaq now is in English. But the SKU IDs still show that it's in Italian.
By the way, I forget to thank: Z!L0G80.
i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx
AbsolutBenz said:
i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx
Click to expand...
Click to collapse
Hi,
As it was given like that, I think you should check the usb cable. Sometimes the cable is not working well. I use the original cable, because the last time I use another there was an error when it was flashing. (I'm not sure if the active syn is necessary. In my case, I have the active syn on my laptop. XP enviroment.)
If you want to try the SDBootloader you can find in this forums some instructions about cutting some bytes to obtain the flashdio.nb0
But I really don't recommend that way. Because the last time when I find the way to change the language by flashing the english Rom following those instruction. My phone was bricked. So I tried to find another way.
And this is it.
I think this method is the safest way for newbie. As I wrote above. The first time I bricked my phone. But I did the same procedure again. And it worked.
Just check the procedure again.
Good luck,
For the SDloader update (Which works very very well on my German 914c):
download the file below (I already cut the first 3432 bytes from it), put it on a newly formatted SD-card (not SDHC!) and hold down volumeup+OK button (the one on the right side) while pushing the reset button, hold the mentioned sidebuttons until you see SDloader. Then wait for a few minutes, and the update will finish!
If the updater does not find the file, you have to re-format the SD-card to either FAT or FAT32!
Rename the file to FLASH.DIO when you copy it onto the SD-card!
http://rapidshare.com/files/236053650/FLASH.DIO.html
vragon said:
Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal
Click to expand...
Click to collapse
Hi Everybody,
@vdragon
1- what a great job, guy!
2- in reality, i have already flashed your ROM successfully for my ipaq 914c, which is a native italian version. Since the incompatibilites of different versions were resolved perfectly.
3-Grazie tanto di nuovo
I'm pretty new with this and I've been trying to update my 910 with original ROM but for some reason it gets stuck and the only way to bring it back is with a SDLoader I downloaded from here but that one is very simple and I'd like one with all the programs.
Is there a way to load yours on it through the SD card?
you can follow the instruction to cut the 3432 bytes and flash your phone with SD card.
I see that many people prefer to use the sdloader method than this one.
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.
vragon said:
...
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.
Click to expand...
Click to collapse
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?
congtiger said:
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?
Click to expand...
Click to collapse
sure
congtiger said:
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
Yes it is true!
Using vragon's patched Updater the following is updated:
OS (=ROM)
Bootloader
Pre-Bootloader
Radio&Modem
This update takes about 20minutes, so be patient, do not remove any cables during update!
The flashing of FLASH.DIO with an SD-card "only" updates the OS (=ROM) and is done within less than 10minutes.
Thanks vrago for patching the Romupdate.dll!
You can also see it in the bootsplash screen. Before the update (even after SDloader updates) it always showed FW 1.04.
Now it is 1.09 - and yeah, it works GREAT and quick!
I can recommend it!! (I do not take responsibility though)
Should be a sticky!!
I've been trying this file, and I get an error at 51% of update. Any ideas?
I think it's about your cable. Be sure that you use the original cable with the anti-noise hub.
If you didn't success the first time. Try it again.
Do as you did the first time.
And just be patient. Don't move anything.
The first time I used this method, at the middle of flashing, I kicked my cable and it just stopped. And I did it again carefully.
So that's it
Actually, I think I figured it out. It seems that Vista treats USB partnerships differently than XP, so after a certain amount of time, it "refreshes" the relationship with the USB device. If you are trying to flash your phone, that stops the flash/update.
I just used my XP system, and it worked fine. After a few registry tweaks for ring volume and battery life, it's working fine.
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
I'm positive the SD Loader method isn't as thorough as this method. This method takes 20 minutes or so, and you can see that it's updating the pre-loader, modem/radio, etc. The SD method only updates software.
Problem using HP 614c from original ITA rom
I am a stupd guy
I am a stupd guy
I am a stupd guy
Hy vragon, i have used your method to upgrade my device 614c (and not 914) from an original Italian ROM. All process is ended correctly, all upgrade are finished without errors.
The update utility has made the update of that:
Software - From Version - To Version
Bootloader - 1.00.07 - 1.01.01
Windows Mobile 6.1 Professional - 1.00.07 - 1.01.01
Pre-Bootloader - 1.00.07 - 1.01.01
iPAQ WAN Radio Firmware - 0.81.00 - 1.09.00
But after the upgrade, at the end the display was black(not really black i can see the leds of the entire display are ON but das not appear nothing), and after some minutes abouth 20, i removed the battery and restart the device but nothing has changed. The led over the screen and the sound working.
I have try also to do a hard reset with a flash.dio on an SD card inserted to replace the Rom, but dose not work!
The device after that will work properly, and das not appear to have any problem.
CAN SOMWONE HELP ME !!!
@ilconte81:
just go to hp site.
find a ROM update for 614c.
download it.
using winrar to extract everything in the exe file.
copy the ROMupdate.dll from my file to replace the file in the folder which is extracted from exe file.
run the rom update again.
Tanks for reply vragon,
i have tryed to do what you wrote, but the device will not be right recognized from the OS (will appear USB device not recognized) and the update utlity after a long time in "Plese wait while the device state is verified" give the comunication error Code 402, Cannot comunicate with device.
I use the original cable and try these on different OS like Win XP and Win 7.

Categories

Resources