I upgraded my wife's P3300 from English WM5 to English WM6 (WWE 3.13.405.1_4.1.13.44_02.94.90) without a problem.
OK, now I'd like to upgrade it from English WM6 to Finnish WM6 (FIN 3.13.414.1_4.1.13.44_02.94.90). When I start the EXE file, it will go all the way to 2% but after that it stops and announces that the hardware (P3300 with English language) is not suitable for Finnish WM6 upgrade. Then the phone is restarted and nothing has happened. It's still in English.
I'd really appreciate if someone would know a solution to flash that Finnish software to that phone. Why it doesn't approve the Finnish software? Is there a certain setting that I'd have to do in order to flash the phone with Finnish WM6?
Thousand thanks in advance!
P.S. Both softwares are DLd from HTC's website so they're not cracked softwares...
BTW, that US HTC link TCP-IP address (to those different softwares) has changed. If someone's interested to get the new TCP-IP address, I can post it over here.
Did you unlock her phone? http://forum.xda-developers.com/showthread.php?t=311403
........................................................
prodinho said:
Did you unlock her phone? http://forum.xda-developers.com/showthread.php?t=311403
Click to expand...
Click to collapse
No I didn't since I didn't know that it requires unlocking in order to flash any WM6 version to it. I'll try it again. Thanks for the advise!
BTW, our phones are not locked by any operator, but I really hope that this method works also for "standard" HTC P3300 phone.
P.S. If unlocking is what it takes to flash any WM6 version to P3300, I think I can manage. But if I'd need some further information, I'd be very pleased if I could then continue my series of "stupid questions"
Need for help with USPL!!!!!!!
Well, USPL didn't work for me...
If the flashing should take about 10 minutes, the DOS screen was displayed about 5 minutes and the state of upgrade only 5 seconds.
After that I tried to flash the Finnish WM6 to my wife's phone without any success. The upgrading stops at 2%, after that the phone is rebooted and I'll get the following error message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I definitely need some help!
I'd really appreciate if someone could help ASAP!
Thanks in advance!
P.S. I followed the instructions of USPL very closely, so I don't think I've made a mistake during the flashing. The phone is still running on that English WM6
Device information:
IPL 3.13.0001
SPL 1.11.0000
GSM 02.94.90
OS 3.13.0.0
Sensonic said:
Well, USPL didn't work for me...
If the flashing should take about 10 minutes, the DOS screen was displayed about 5 minutes and the state of upgrade only 5 seconds.
Click to expand...
Click to collapse
Hm well USPL didnt work..
Which ROM are you trying to flash to it?
prodinho said:
Hm well USPL didnt work..
Which ROM are you trying to flash to it?
Click to expand...
Click to collapse
This one:
HTC_P3300_FIN_3.13.414.1_4.1.13.44_02.94.90_Ship_R.exe
Downloaded directly from HTC US site, so it must be an official ROM version.
The English WM6 I have flashed and it's running OK is the following:
HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
also downloaded from HTC US site, so it's official.
I just don't get it how the hell I could get that Finnish WM6 into my wife's phone... Any help will be highly appreciated!
Never mind, I found the solution. Now my wife's going to get HTC P3300 with Finnish WM6 ;-)
Oops I lost track of this thread..
Glad that you did found a solution tho!
Perhaps you could post what the problem was and what you did to get it working?
prodinho said:
Perhaps you could post what the problem was and what you did to get it working?
Click to expand...
Click to collapse
OK, first I installed USPL to my wife's phone. Since her phone was equipped with English WM5 I flashed it with WM6 WWE at first. After that I used WinHexEdit and copied the country code row from English RUU file. Then I just pasted that country code row to Finnish WM6's RUU file. After that I flashed my wife's phone with the modified Finnish WM6 ROM. It worked and the language was changed from English to Finnish.
But now I'm facing another problem with her phone: I installed HTC Home (similar to Kaiser's one) to her phone but it doesn't work correctly maybe because of the language of the phone. So does anybody know how to tweak the country settings of HTC Home?
Sensonic said:
OK, first I installed USPL to my wife's phone. Since her phone was equipped with English WM5 I flashed it with WM6 WWE at first. After that I used WinHexEdit and copied the country code row from English RUU file. Then I just pasted that country code row to Finnish WM6's RUU file. After that I flashed my wife's phone with the modified Finnish WM6 ROM. It worked and the language was changed from English to Finnish.
But now I'm facing another problem with her phone: I installed HTC Home (similar to Kaiser's one) to her phone but it doesn't work correctly maybe because of the language of the phone. So does anybody know how to tweak the country settings of HTC Home?
Click to expand...
Click to collapse
In the windows folder of your wife´s Artemis should be a file named HTCHome.dll.0409.mui and you have to rename it as HTCHome.dll.040B.mui
jou_llorente said:
In the windows folder of your wife´s Artemis should be a file named HTCHome.dll.0409.mui and you have to rename it as HTCHome.dll.040B.mui
Click to expand...
Click to collapse
OK, I'll try it. Many thanks for this advice!
Related
Qtek S100 French 1.06.02_1.06.551_1.05.00 decrypted rom uploaded to ftp.
ftp://xda:[email protected]/Magician/French/
Enjoy.
Do not forget to change operator and country id.
I receive errors when I try to update operator and country id... Is it normal ?
Thanks in advance...
Largo
Largo,
you need to use the http://www.ce4you.cz/forums/downloa...les/forums/cz/0000053752/MaUpgradeUt_noID.exe
you stick this in the same folder as you extract the ROM
you click once, your S100 will go on Cold Boot mode, then you got an error.
You click again on MaUpgradeUt_noID.exe and you are set
let us know if you get it OK
bruxelles5 said:
Largo,
you need to use the http://www.ce4you.cz/forums/downloa...les/forums/cz/0000053752/MaUpgradeUt_noID.exe
you stick this in the same folder as you extract the ROM
you click once, your S100 will go on Cold Boot mode, then you got an error.
You click again on MaUpgradeUt_noID.exe and you are set
let us know if you get it OK
Click to expand...
Click to collapse
It works well with your Dangaard Rom but not with the Qtek Rom mentionned in this post... Perhaps my file is corrupted...
I have been converted these files to old format that xda3nbftool can accept.
You can change operator and country id with xda3nbftool.
Here are the errors I receive :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
???
Largo
all is ok!
Largo_Winzclav said:
It works well with your Dangaard Rom but not with the Qtek Rom mentionned in this post... Perhaps my file is corrupted...
Click to expand...
Click to collapse
If it work well with the Dangaard ROM then don't bother, stick with the Dangaard one
:lol:
Can I put this ROM on my I-mate JAM...is this ROM in English or French?...
Regards,
Primoz
p.s. Has anyone noticed some benefits in this ROM after the 1.06 version?
Help : How to Update
I've just bought my S100 french and I'd like to update. But I never did it before. Can someone tell me how to do it and if it's difficult. I'm in Belbium (Brussels) and I speak french. It can be done by phone if it's easyer for you.
Best regards.
[email protected]
Re: Help : How to Update
mamac said:
I've just bought my S100 french and I'd like to update. But I never did it before. Can someone tell me how to do it and if it's difficult. I'm in Belbium (Brussels) and I speak french. It can be done by phone if it's easyer for you.
Best regards.
[email protected]
Click to expand...
Click to collapse
there is 2 main things,
1- you have a reel S100 QTEK you buy this in Belgium or France
then you just download the update you click you wait and you are set
(go to FTP on XDA) and you will see Magician folder.
But if I was you if your QTEK come from Belgium and still under waranty I won't bother and I will go to the dealer and have it update for you.
It's easy, hard to failed, but hey you never know
2- you have a S100 from Germany (or whatever country else) then you need to DL the link above and same things you click you wait and you are set.
It's like installing a program. When you start you have to wait, don't disconnect or so, anyhow you will see warning on the sreen, telling you what to do or not to do
see ya
Pc78 said:
Can I put this ROM on my I-mate JAM...is this ROM in English or French?...
Regards,
Primoz
p.s. Has anyone noticed some benefits in this ROM after the 1.06 version?
Click to expand...
Click to collapse
if you go to FTP on XDA you will see 2 ROM one in English ( WWW ) and one in French ( FRA )
your choice to DL
bruxelles5 said:
Pc78 said:
Can I put this ROM on my I-mate JAM...is this ROM in English or French?...
Regards,
Primoz
p.s. Has anyone noticed some benefits in this ROM after the 1.06 version?
Click to expand...
Click to collapse
if you go to FTP on XDA you will see 2 ROM one in English ( WWW ) and one in French ( FRA )
your choice to DL
Click to expand...
Click to collapse
I have found just the extended ROM!...
Regards,
Primoz
noooooooo you are in the wrong folder I guess
Look what I see on XDA FTP (in the folder Magician/..........)
@mamac: make sure you do a backup first. make sure you connect your device via the supplied cable directly to your PC (don't use USB hubs or stuff like that), remove the cards from the SD slot. follow instructions and be patient and everything will be fine
upgrade Qtek S100
I upgraded my S100 yesterday since then the touch screen does not work properly anymore. Does anybody know waht happened? I can not use the touch screen anymore... :?
After the upgrade it is ok. It's only after I do the backup to restore my programm that it won't work anymore.
Thanks
What are the benefits of ROM v 1.06.02?...any emprovements from version 1.06 (qtek, I-mate,...)...
Regards,
Primoz
Newbie alert:
I have a French Qtek S100, which I have essentially left untouched, and I get the following error message when I try to upgrade to this new ROM version: "ERREUR 123 : ERREUR DE CHECKSUM DU FICHIER IMAGE RADIO"
That is to say, checksum error regarding radio image file.
I would be grateful for any advice...
tupisdin said:
Qtek S100 French 1.06.02_1.06.551_1.05.00 decrypted rom uploaded to ftp.
Click to expand...
Click to collapse
Thanks a lot !
Where did you get it ?
Erreur 123 : erreur de checksum du fichier image radio
I have the same difficulties than Sprotch : what is the solution please.
Thanks
On TyTN it is possible to change loading screen e.g. like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does somebody know address to flash the same via MTTY to Artemis as well?
Im also very intrested into changing my startup screen.
its a great Idea to put your address there because it doesn't go away after a hardreset and most people wont know how to get rid of it.
planning to put a nice bluefish over there, you figured it out yet?
itarix said:
Im also very intrested into changing my startup screen.
its a great Idea to put your address there because it doesn't go away after a hardreset and most people wont know how to get rid of it.
Click to expand...
Click to collapse
it tries with this:
http://www.4shared.com/file/19395089/5971579/Upgrade_HTC_First_Splash.html
clodia72 said:
it tries with this:
http://www.4shared.com/file/19395089/5971579/Upgrade_HTC_First_Splash.html
Click to expand...
Click to collapse
still seeing a htc logo at boot...? did it just change again, from a htc logo to a htc logo, or did nothing happen?
thanks for helping though!
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=20&Itemid=27
clodia72 said:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=20&Itemid=27
Click to expand...
Click to collapse
can anyone confirm that it works?
itarix said:
can anyone confirm that it works?
Click to expand...
Click to collapse
I think so.
Dutty's is ok for artemis
clodia72 said:
I think so.
Dutty's is ok for artemis
Click to expand...
Click to collapse
Dutty's IS not OK FOR ARTEMIS You have to use an othe tool. i will upload it tonight i don't have it here at my work. DUTTY's is for the hermes not the artemis
pvdhelm said:
Dutty's IS not OK FOR ARTEMIS You have to use an othe tool. i will upload it tonight i don't have it here at my work. DUTTY's is for the hermes not the artemis
Click to expand...
Click to collapse
Could you upload all of the files needed to change boot screen?
pvdhelm said:
Dutty's IS not OK FOR ARTEMIS You have to use an othe tool. i will upload it tonight i don't have it here at my work. DUTTY's is for the hermes not the artemis
Click to expand...
Click to collapse
Here is a link for the HTC ROM Tool form Dark Simpson to use with Artemis (don´t use Dutty´s tool for artemis)
http://forum.xda-developers.com/showthread.php?t=311909&highlight=htcrt.exe
Tnx Uliba this is the tool i was talking about.
I have assembled the ROM for my MDA Compact3
I have assembled the ROM for my MDA Compact3 with Dutty's and all correctly works!!!
I have change the OS from German to Italian, without canghe the files IPL and SPL
The ROM is possible to see here her ---> http://forum.xda-developers.com/showthread.php?t=316159
Has been only fortune !!
Or with Dutty it is possible to also assemble ROM for Artemis.
Always failed for me with duty's tools...
clodia72 said:
I have assembled the ROM for my MDA Compact3 with Dutty's and all correctly works!!!
I have change the OS from German to Italian, without canghe the files IPL and SPL
The ROM is possible to see here her ---> http://forum.xda-developers.com/showthread.php?t=316159
Has been only fortune !!
Or with Dutty it is possible to also assemble ROM for Artemis.
Click to expand...
Click to collapse
If you are successfull, it will work - i personally had some problems, but may be this was with a former version. Since that i build my roms with HTC Tool.
The next rom that I cook, will try to use HTC Tool.
Is never finished learning, thanks!!
clodia72 said:
The next rom that I cook, will try to use HTC Tool.
Is never finished learning, thanks!!
Click to expand...
Click to collapse
Hi friend - we all are always learning.
For info - i use Dutty´s tool for extracting - for example if i need an special radio rom.
uliba said:
Hi friend - we all are always learning.
For info - i use Dutty´s tool for extracting - for example if i need an special radio rom.
Click to expand...
Click to collapse
YES, I use for extracting the files * .nbh, and it is very simpler and comfortable than NBHextract.
didn't work
it didn't work followed the instructions to make the nb file then converted it to nbh with the htc tool.
after that I renamed the file to TOM_B.B_v3.7_WWE.nbh and used its flash program RUU
it goes to 100% in a split second, and then it says on the pc screen error 228? (not sure about the number) wrong file size, invalid or corrupt file.
the phone simply reboots and I the old bootscreen.
but at the bright side... my phone still works
anything im doing wrong?
did it work with the dutty tool?
btw the htc tool only allows you to select one bootscreen no sub bootscreen. did the people that got it to work with dutty select 2 bootscreens?
itarix said:
it didn't work followed the instructions to make the nb file then converted it to nbh with the htc tool.
after that I renamed the file to TOM_B.B_v3.7_WWE.nbh and used its flash program RUU
it goes to 100% in a split second, and then it says on the pc screen error 228? (not sure about the number) wrong file size, invalid or corrupt file.
the phone simply reboots and I the old bootscreen.
but at the bright side... my phone still works
anything im doing wrong?
did it work with the dutty tool?
btw the htc tool only allows you to select one bootscreen no sub bootscreen. did the people that got it to work with dutty select 2 bootscreens?
Click to expand...
Click to collapse
Here is a new link: Screentool, which is easy to use!!!
http://forum.xda-developers.com/showthread.php?t=317726
since they (HTC) released the long waited WM6 upgrade today and all the guys posted
bunch of links i decided to gather them all in one thread to ease the search for the members in XDA
enjoy .
1. WWE HK ENG version
http://210.64.124.194/download/838Pro_HK_ENG_WM6_Upgrade_20070712.zip link is Working
or
http://www.asia.htc.com/download/838Pro_HK_ENG_WM6_Upgrade_20070712.zip link is dead temporarly
or
http://www.dopodasia.com/download/838Pro_HK_ENG_WM6_Upgrade_20070712.zip link is dead temporarly
or
http://rapidshare.com/files/42461391/838Pro_HK_ENG_WM6_Upgrade_20070712.zip.html thanx caferoom
or
http://www.megaupload.com/?d=IASNVPS7
2. WM6 Chinese Traditional version
http://www.asia.htc.com/download/838Pro_HK_CHT_WM6_Upgrade_20070712.zip
or
http://rapidshare.com/files/42606297/838Pro_HK_CHT_WM6_Upgrade_20070712.zip
3. Original ASIA (singapore) version
http://www.asia.htc.com/download/838Pro_SEA_ENG_WM6_Upgrade_20070712.zip
4. WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
http://rapidshare.com/files/4297231...57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship.exe
i will try to upload the WWE ver when ever the download completes as its too fcking slow .
----------------------Edit--------------------------
mrvanx said:
may i reiterate again, the RUU in the official version WILL NOT work if you have updated to HardSPLv7 (which is HIGHLY RECOMMENDED).
Therefor you need to use the repackaged version i uploaded to rapidshare and megaupload.
RapidShare
MegaUpload
Click to expand...
Click to collapse
----------------------------------------------------
someone asked for screen shots ... here you go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here's the rest of screen shots since i CANT add more than 4 images in one post
http://suprfile.com/src/1/8a6ftxq/Screen003.jpg
http://suprfile.com/src/1/8a6laq3/Screen007.jpg
http://suprfile.com/src/1/8a6mrj1/Screen008.jpg
http://suprfile.com/src/1/8a6nwok/Screen009.jpg
http://suprfile.com/src/1/8a6orga/Screen010.jpg
http://suprfile.com/src/1/8a6pyok/Screen011.jpg
http://suprfile.com/src/1/8a6rh7j/Screen012.jpg
http://suprfile.com/src/1/8a6tw9f/Screen013.jpg
http://suprfile.com/src/1/8acusj9/Screen014.jpg
but i'm wondering why is the old dialpad and connection manager is in this rom ?? shouldn't they be updated to the wm6 ones ?
anyone with another links plz post .
thanx， it is very nice of you
sticky! Nice work!
may i reiterate again, the RUU in the official version WILL NOT work if you have updated to HardSPLv7 (which is HIGHLY RECOMMENDED).
Therefor you need to use the repackaged version i uploaded to rapidshare and megaupload.
RapidShare
MegaUpload
Whats RUU? I have got the original Vodafone branded one. Will this official ROM upgrade work as is?
Mods - can we please either transfer all the info from the other collected links thread into this one or 'sticky' it as well?
I'm not redoing all of that - I'm Alt-Tabbing my way out of getting the sack as it is!
Cheers.
mrvanx said:
may i reiterate again, the RUU in the official version WILL NOT work if you have updated to HardSPLv7 (which is HIGHLY RECOMMENDED).
Click to expand...
Click to collapse
It will work, you just have to put your hermes in bootloader mode manually first...
Does anyone know which version will be uploaded to the Australian HTC site? They've apparently removed the roms temporarily at this stage.
Hello everybody!!
Is this rom useful form TYTN (Hermes 200)??
Thanks for answer
In this moment iìve Schaps 3.30A
webtime said:
Hello everybody!!
Is this rom useful form TYTN (Hermes 200)??
Thanks for answer
In this moment iìve Schaps 3.30A
Click to expand...
Click to collapse
The rom can be flashed onto any Hermes, so yes.
thank god~~! i waiting it so long time
Thanks for answer!!!!!!
nbedford said:
It will work, you just have to put your hermes in bootloader mode manually first...
Click to expand...
Click to collapse
I second that ... upgraded fine that way
i also upgraded mine without running anything or entering boot manual .
all went smoothly .
thanx for sticky sleuth & mrvanx for addition .
Hi everyone,
I'm sorry i'm a noob.... i'm having CHT9000 Herms for sure, will the Asia Singapore version works in CHT9000? I was wandering anyone tried yet?
Hope you can share the result m(_ _)m sorry if this is really a noob question....
Regards,
Narutu
Still didnt managed to download the WM6 ROM from HTC website as it is f*** slow and timeout many many times
Can someone who have downloaded the ROM post it in some other place to facilitate download?? Thanks a million.
kopibean said:
Still didnt managed to download the WM6 ROM from HTC website as it is f*** slow and timeout many many times
Can someone who have downloaded the ROM post it in some other place to facilitate download?? Thanks a million.
Click to expand...
Click to collapse
check this out
http://forum.xda-developers.com/showpost.php?p=1363406&postcount=1
its on megaupload and rapidshare
a-h-t1 said:
check this out
http://forum.xda-developers.com/showpost.php?p=1363406&postcount=1
its on megaupload and rapidshare
Click to expand...
Click to collapse
But CHT is not on raidshare or megaupload
T-mobile MDA US
Wheezle said:
The rom can be flashed onto any Hermes, so yes.
Click to expand...
Click to collapse
Even the MDA in the US ?
weasley said:
But CHT is not on raidshare or megaupload
Click to expand...
Click to collapse
i'll try to upload it for you since i didn't dnld it at all . give me some time and i will ..
Over at PDAClan.com they're working on WM 6.5 for the HP iPAQ 610-series. Currently, there are bunch of bugs to be worked out, but at least we know there's something in the pipelines...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For more screenshots, you can head over to the original post.
Yaaaaaaay you made my day!
Yeey mine too.
can we get a general idea of what the bugs are?
Google translate, tells me its the "landlord" :S
Huhuuuu, cant wait...
Lets hope they make an English version eventually .
This is still very very good news.
thebranded said:
can we get a general idea of what the bugs are?
Google translate, tells me its the "landlord" :S
Click to expand...
Click to collapse
He says they already know about a couple of bugs:
1. After opening Settings > Phone, the window can't be closed.
2. "Missing card." [-]Whether he means the SIM or the SD card I'm not sure.[/-] It's the SD card that can't be detected, thanks aaronx.
3. "This isn't an official 6.5, because the .VM and .ROM in 6.5 aren't the same as in 6.1. Since the HP612 has never come out with 6.5, there's no place to find the precise .VM and .ROM needed to transplant [WM 6.5 onto the HP612], unless an expert can properly modify them based on 6.1. Here, I've used the resources from 6.1. However, not trying out [the ROMs for this reason] simply won't do - on the basis of the PocketPDA Xiu Mutou's 6.5 ROM for the Dopod U1000, which basically has no problems. From this we can see that using the .VM and .ROM from 6.1 can produce a ROM without bugs - as to the other properties, I just don't know."
Zoltair Wright said:
He says they already know about a couple of bugs:
2. "Missing card." Whether he means the SIM or the SD card I'm not sure.
Click to expand...
Click to collapse
He said "Missing Card" means the HCSD card can not be found.
I still waiting for WM6.5
I hope is can fix bluetooth problem.
there is a stable wm 6.5 , 21193 build
..but it is in simplified chinese, I flashed it and it seems so far so good
I think there is english in the rom since when I shutdown it actually give english message in the popup box, so it may be able to changed to english by registry
but I haven't had time to look at it yet
anyway here is the link to the post in pdaclan:
image from the post:
p.s: at least these works
- wifi
- 8 G sd card
keyx said:
there is a stable wm 6.5 , 21193 build
..but it is in simplified chinese, I flashed it and it seems so far so good
I think there is english in the rom since when I shutdown it actually give english message in the popup box, so it may be able to changed to english by registry
but I haven't had time to look at it yet
anyway here is the link to the post in pdaclan:
image from the post:
p.s: at least these works
- wifi
- 8 G sd card
Click to expand...
Click to collapse
Hi,
Sounds nice, but for an WWE interface you need the complete langpack : 0409.mui and as there 's still no emulator for the WM6.5 , it's not available yet....
Dirk
ya i guess...I haven't never cooked a room before so I have no idea exactly how the mui thing work.
May be i wiill look at some some 6.5 rom in ppcgeeek to see if i can copy the english mui over? Do you think it is possible?
keyx said:
ya i guess...I haven't never cooked a room before so I have no idea exactly how the mui thing work.
May be i wiill look at some some 6.5 rom in ppcgeeek to see if i can copy the english mui over? Do you think it is possible?
Click to expand...
Click to collapse
Not to mention you'll need to replace ALL references of the old mui to the new, include fonts etc ... and even then you can have some driverproblem.
Guess I'll wait some more time
Dirk
i extracted the rom and notice it is probably protected...package tool cannot recreate sys and oem folder
so i think the whole thing need to be start from scratch, but at least we know it is possible
some update for my first rom cooking!
I successfully flashed mine to ENGLISH 6.5 using xip extract from the chinese rom and combine it with the sys floating around here/ppcgeek
wifi work...but the problem is PHONE does not work
so need to compare files with the chinese rom to see what i am missing
if anyone know why the phone doesn't show up in the communication manager let me know
EDITED: may be because i used a cdma sys? let me try to use different sys lol
great news!
i replaced ril.dll, phone.dll and rilgsm.dll and now the phone works
i will start a new thread when i package the whole thing up
EDITED: new thread created, pls go to new thread if regarding my rom
awesome 6.5
keyx,
do you mind share the link of ya new thread or the location where i can download ya cooked WM6.5 installer for ipaq 61x series .. appreciate that
err isn't my thread on top of this forum?
keyx said:
err isn't my thread on top of this forum?
Click to expand...
Click to collapse
lol i think deftons actually used the search button!
search for "WM 6.5 for 610" returns this thread as the first hit
search of "WM6.5 for 610" gives yours
WWE Custom Rom for HTC Alpine.Test Version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE. This rom won't brick your device.
U must have installed OS image(nk.nbf).
Download
http://www.4shared.com/file/E7BUU_g0/ALPINE_NS_ROM_V10WWE.html
See this great work by SHAHEN with a little ammendment by me that is (wm6.5 booting screen) in the start
http://www.youtube.com/watch?v=-D50DiLTjJU
If you also want a wm6.5 booting screen you can do the following
1. get the two files which are attached below
2. If you download SHAHEN's rom then its very good.......otherwise if you only want the wm6.5 booting screen then you may download only my files
3. copy the splash2.nb file to your windows directory in you ppc
4. now copy the splash_changer to you ppc and run it..
5. You are done now reset your device and see
extract the splash.rar file
it contains two files Splash2.nb (wm6.5 booting screen)
and splash.nb (wm6.1 booting screen)
splash2.nb can be directly copied to the windows folder
for Splash.nb first rename it to Splash2.nb before coping to windows folder
It would be great if somebody could upload some screenshots, cause my battery is dead and radio part is bricked. At the present moment I can't do it. Especially dialer screenshot, like this one, but with English captions.
I hope i could upload the screen shots
But my radio already bricked
And please somebody first install SHAHEN ROM before installing my splash screens because we want to know wether it already has wm6.5 booting screen or not
and if it did not have then you can follow my points and can have it
THanks
WTF
Russian version already contained wm 6.5 splashscreen like on the banner. So I'm confused.
But i already installed it before thats why i see no change
you can see my wm6.1 splash screen
so that i upload more with something different
Here is my windows7 and vista splash screen check it
Download it and then comment please
For all bootscreens the same method
rename the splash.nb file to splash2.nb
use the splash_changer given in above posts to install it
This it the ROM WM6 for Alpine or style WM6 fix???
If the ROM WM6, i can install software for WM6 in it or not?
qmha said:
This it the ROM WM6 for Alpine or style WM6 fix???
If the ROM WM6, i can install software for WM6 in it or not?
Click to expand...
Click to collapse
it's 2003 SE with theme.
Hi again
Wanna version 2.0? I have sucessfully cooked new rom(RUS). If u want, I can create WWE port. See more at http://4pda.ru/forum/index.php?showtopic=264429
Shahen said:
Wanna version 2.0? I have sucessfully cooked new rom(RUS). If u want, I can create WWE port. See more at http://4pda.ru/forum/index.php?showtopic=264429
Click to expand...
Click to collapse
Cool, yap, do so! Well done. It is still WM5, right? But a really good looking one!!
Waiting for the WWE port. No problems on flashing? Please, include the working flashing tool. Oh, I see, you did it, Thanx.
Update
Yep, no problems on flashing. RUS version works very well. I've started my work on WWE port 2 weeks ago, but..... I've got a little problem. Unfortunately, due to lack of free time, this project was temporary stopped. As soon as it is possible, I will continue to work on this port... I hope it will be ok.
Good work Shahen
Shahen said:
Yep, no problems on flashing. RUS version works very well. I've started my work on WWE port 2 weeks ago, but..... I've got a little problem. Unfortunately, due to lack of free time, this project was temporary stopped. As soon as it is possible, I will continue to work on this port... I hope it will be ok.
Click to expand...
Click to collapse
you are doing well,
but the thing is that i have given up and put my pocket pc aside i m doing CA ( Chartered Accountancy) that's why having no time for it.
Hopes are with you what ever work you do will be appreciated Thanks
At work
Ok. I've finally solved all problems. Today I'll start building WWE version. And perhaps, on the weekend I'll upload 2nd WWE version with a little Add-on.