ppl i´m from portugal...i bought on ebay a xda vario I and i have a problem with wi-fi i can´t get connect to my network using wi-fi...anyone can help me?the pda find my network i enter the key but don´t connect... help me plz sorry my english
omg, so you have vario and cannot connect by wifi.
any fockin more details?
can you use ppcphone at all?
did you read a MANUAL at last?
mods can me ban now for that...
sorry for my bad english too.
'e muito facil man.
It is easy man.
hum i have other problem no...on the other day the screen dissappear litle slowly, i don´t know what it is!it started after i format, and pass some hours the screens appears only with some line and everything else white...but if restart the pda the screens become ok...its a software or a hardware problem???
Related
Hi,
I would like to know if anyone else has GPRS problems with the QTEK 9100 ? It hangs up as it wants (once every 10min, once every 24h) If it is connected and I want to sync, it doesn't work, I have to hang up in order to reconnect and sync.
Anyone knows something about this ?
Micman
I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.
Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.
Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Need answers , hit me ;-)
Micman
Moonsower said:
I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.
Click to expand...
Click to collapse
I have MTS but no problems :wink:
Thanks Micman. Workin great
q-biq said:
Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.
Click to expand...
Click to collapse
Just press and hold the red end key for more than 3 seconds and the GPRS-connection is terminated. I have even tried to install GB softtweak wich is able even i WM5.0 to bring the disconnect button to the gprs-bubble and it work.
Powershot-g2
Zamsky
I guess Tver's MTS GPRS differs from Moscow's. I heard they're testing EDGE here. This might be the cause. 9100 hangs on GPRS every time until reset or flight mode on/off.
Yes, the same situation...
In very random moments GPRS hangs ... I'm with Vivatel, Bulgaria...
Have you found solution ?
Micman said:
Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Click to expand...
Click to collapse
Nice utility thanks
Hello all
My gprs connection works correctly, but sometimes it indicates "the connection with the modem has finalized" and then, if i don't do it a soft reset, this connections don't works again NEVER, there is no another solution, only a soft reset. Why? i cannot think to me that it is the only solution !!!
Anybody can help me please?
Thank you for all and excuse my bad english, it's very dificult for me
I have a qtek s200 and the radio version is 02.30.21
Thank you again
Nobody can help me?
Thank you
I continue having this problem, somebody may help me?
On my phone, when i turn off and later on, the GPRS connection it works again on my qtek s200, but why? where is the problem?... i don't understand anything
Please, i need any idea
Regards
Hi all universal user out there i recently encounter with a problem, my I mate jasjar seems to have problem detecting wifi signal , is there a problem with my software or what ? When I didn't turn on any wifi, it comes out a msg of '' to connect to either internet or work set up a new connecion in settings'' but I couldnt set up any new connections. can any bro help me out with this ?? I am very new to my jasjar now really need help from all the pros out there, much much appreciated.
lawchisin said:
Hi all universal user out there i recently encounter with a problem, my I mate jasjar seems to have problem detecting wifi signal , is there a problem with my software or what ? When I didn't turn on any wifi, it comes out a msg of '' to connect to either internet or work set up a new connecion in settings'' but I couldnt set up any new connections. can any bro help me out with this ?? I am very new to my jasjar now really need help from all the pros out there, much much appreciated.
Click to expand...
Click to collapse
Welcome to the forum
Please refer to the Wiki here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
If not helps, identify what ROM are you using
And a reflash or hard reset could help
Good luck,
hi orb, very nice to see u , I have seen u in diffrent post helping around, very nice to have a person like u in the forum. anyway, I am an extremely new pda user. I dono how to check hard reset the phone can I know wad exactly isit ? And I do not have an IP when the wlan is not connected. Is this the same in every universal? I m sorry in advance if I asked anything stupid..
lawchisin said:
hi orb, very nice to see u , I have seen u in diffrent post helping around, very nice to have a person like u in the forum. anyway, I am an extremely new pda user. I dono how to check hard reset the phone can I know wad exactly isit ? And I do not have an IP when the wlan is not connected. Is this the same in every universal? I m sorry in advance if I asked anything stupid..
Click to expand...
Click to collapse
Thanks for your words mate
I´m still learning also but when ever I have a chance to help I do it happyly!
Here how to hard reset your Uni:
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
Hope it helps,
Hi folks,
I know some body posted a likewise post but I have almost memorized the respond by reading it over and over but it didnt help.and not only this forum I have done hundreds of google searhces, please help me
The problem is ;my sx 66 was running on wm 2003 se and I wanted to upgrede it with wm6 but I dont know what did I wrong it stuck at the screen that says "serial v2.07" or "USB v2.07" when it is plugged in. I dont care what wm it is gonna be I just want it to be fixed. I tried soft and hard resetting and taking out the battery but one of them worked.
my email adress is [email protected]
Thank you very much..
Thank y'all!!
I have fınally upgraded my BA to wm6 wıth ur precious help!!!!!!!!!
I konw it is very hard to wrıte a couple of sentences but come on people!!!!
hi
try this:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Hi,
i have a problem and maybe somebody can help mi.
I would like to that if my Qtek commes out standby automatic a SMS ("Help i am having troubles") commes to my GSM (my GSM number).
It'is for my old mother.
So, the only thing she have tot do is putting the "ON" button.
Maybe this question is too much, but maybe someone can help mi.
Thanks a lot.
Pity that no one can help me.
I am sitting here than on the wrong forum?
Can someone tell me where i or should be?
Sorry for my bad English.
I do note understand well.
So many great programmers on this site and nobody can help.
I regret very much.
OK, i have another solution.
This should be closed, thank you.