I got my Touch today and I purchased and installed Voice Command 1.6. After the install I rebooted my phone and pressed the button on my headset to bring up MSVC but nothing comes up.
Any idea what I am doing wrong?
Strange... does the button work? I'm not having any problems with mine. I had to turn off confirmation with my BT and VC 1.6 combination because the final confirmation wasn't completing... besides that everything works fine with my Jawbone - try another headset?
In the past all i did was press the button once. It appears the touch (or MSVC 1.6) requires you to press and hold the button.
So now it is working. YAY!
What BT headset did you get it to work with ?
Related
Are they compatible?
I've changed the registry to use the voicecmd.exe file instead of the inbuilt Voice Dialer (which I must admit, I never tested with the Jabra!)
But when I press the Jabra button, I hear a noise in my ear but it doesn't seem to activate anything on the MDA Pro itself...
What am I doing wrong?
Have you got the lid closed? If the screen is closed it doesn't work.
This is mad.
If I press the button on my Jabra, I now hear that the voice path is activated but saying "help" into the Jabra mike doesn't do anything. No "mike" icon on the device (lid is open) and nothing happens.
However, with this voice path open, if I then press the voice command button on the device, everything works through BT. I hear the woman and can speak to her.
However, pressing buttons on each device seems a very silly way of doing it.
I should be able to press JUST the headset button, right?
I use the same hardware without issue
I find some commands dont work so well over bluetooth - but call seems to work OK!
I find the built-in mike is better to practice with first THEN try with the headset
I use DIAL <name> at HOME or on mobile etc and this seems OK
My only ***** is than on both BT and the device the VC voice is too low!!
While I remember to 200 Headset supports two profiles - I find the basic one works better with VC (that way you dont accidentally redial if you double tap the button!)
Found the problem. I reinstalled the VC software with no joy, so checked the reg entry. I was missing the space between "Voice" and "Command", so no wonder it wasn't working...
I would have expected an error of some kind instead, maybe... but at least it is solved now.
I got a Bluetrek G2 Bluetooth headset, and i paired it up and when i presss the button i work but after that it not working anymore no matter how many time i press the button
Any advise?
when using VC from MS via BT the Audiogateway stays open.
You have to close it (by pressing the BT button once) before you can give an new command (by pressing the BT button once again)
Has anyone any idea on how I can adjust the time required to hold the headset connect button in order to activate the voice command? Currently I need to hold this for far to long in order to activate it.
Maybe there's something in the manual, but I can't even anwer calls with that button. I think it's supposed to be short press to answer calls, and long press for voice command. Still not figured it out.
That's odd, I press the button for a brief moment , and voice-command is activated.....BT headset btw, but it works like a charm...
The handsfree wired headset that came with the Dopod is the one that takes quite a few seconds of holding to respond. I imagine that a bluetooth headset would work differentially as the time is probably controlled by the device itself rather than the HTC 3600.
Hi All!
I have a problem with HD: I can not start voice dialing by the BT headset (with Polaris worked well), but only to repeat the last call pressing 2 time the button. The headset is a Htc m200 (it supports this feature). Somebody help me solve? TNX!
Mine works fine using MSVC. I I use a cheap bluetooth headset I got from AT&T and in the car it works using my JVC car radio.
you need to hold the call button a little longer than normal and it works. Just dont press and release. hold it and you will hear a blip and make your call.
dandun said:
you need to hold the call button a little longer than normal and it works. Just dont press and release. hold it and you will hear a blip and make your call.
Click to expand...
Click to collapse
Doesn't work this way...by holding just a little bit longer nothing happens, if i hold for more then 3 seconds the headset turn off!
Where can I find information on how to handsfree initiate a call from a bluetooth headset? My understanding is that Android 2.2 Froyo supports this. I have my Plantronics 975 headset synced and working, but can't get voice dial to initiate. Pressing the button on the headset just makes a beep, but doesn't do anything on the phone. Pressing the button twice redials the last number, but it did that on my old G1 with Android 1.6.
Is anyone using a Plantronics 975 with a G2? Does voice dialing work for you?
Thanks,
Tauren
yowzator said:
Pressing the button on the headset just makes a beep, but doesn't do anything on the phone.
Click to expand...
Click to collapse
No idea about the plantronics. With my headset (Sony DR-BT22), pressing the call button on the headset starts the voice dial app (audio through the headset) and a long-press performs a redial.
I figured it out and feel stupid now. But just in case someone else is having trouble, here's the answer...
* Hold down the main button for 2 seconds and voice dial starts (see http://bit.ly/bO0Gvo)
* Double press the main button and redial starts
* If bluetooth is not connected, single press the main button to connect.
* Not sure what a single press does if the connection is already established.
I never tried a long press because a really long press shuts the headset off. I didn't even think that there might be a "short long press" and a "long long press".
On my Moto H17 BT headset, it seems a single press on the button initiates the voice dialer on my G2, and a "short long press" redials.