disable xt9 - Windows Mobile Development and Hacking General

Is there any way to disable xt9? I tried to disable via the sip options but it keeps appearing everytime I start a sip usage... further more... it disables the native auto-complete from wm6....
anyone has a clue?

Hello.
Sorry but i'm not english.
Try to change on registry
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
I hope help you.

DAVIMON said:
Hello.
Sorry but i'm not english.
Try to change on registry
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
I hope help you.
Click to expand...
Click to collapse
gracias It worked
know there's just another problem... the xt9 keyboard is now a qwerty keyboard, is there anyway to have it back without activating xt9?

philocritus said:
gracias It worked
know there's just another problem... the xt9 keyboard is now a qwerty keyboard, is there anyway to have it back without activating xt9?
Click to expand...
Click to collapse
It's not posible, but you can make two cabs with the previous reg settings, to activate or deactivate easily.

DAVIMON said:
It's not posible, but you can make two cabs with the previous reg settings, to activate or deactivate easily.
Click to expand...
Click to collapse
Hi, i tried the fixing and now my S710 keyboard didn´t recognize anymore strokes and i couldn´t re-enter the original layout and ime file. Pls could some post the cab file or the previous HCKLM/System/CurrentControlSet/Control/Layout/e0010409 reg file to import it again? Thanks!

berndhufmann said:
Hi, i tried the fixing and now my S710 keyboard didn´t recognize anymore strokes and i couldn´t re-enter the original layout and ime file. Pls could some post the cab file or the previous HCKLM/System/CurrentControlSet/Control/Layout/e0010409 reg file to import it again? Thanks!
Click to expand...
Click to collapse
Done! No action required!

Related

Fixing German QWERTZ keyboard for O2miniS with O2 EnglishROM

Fixing German QWERTZ keyboard layout for O2 miniS with English ROM installed is very simple.
Many nomally use AEKmap, but this is not allways fine for somebody.
Now we need a small registry hack.
1. Use a registry editor like total commander.
2. Go to \HKCU(HK Current User)\ControlPanel\Keybd\Locale.
3. Change the value of the key "Locale" from "0809" to "0407". "0407" is the locale ID for Standard German. You can find other Locale ID suitable for you at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx.
4. Do a soft reset and enjoy. All the keys and symbols have fixed right.
Hope this help someone.[/list]
wooooooow!!
That's good.
I will try that NOW
Well I don't see any Locale folder under Keybd...
What next?
cizake said:
Well I don't see any Locale folder under Keybd...
What next?
Click to expand...
Click to collapse
Dear cizake,
"Locale" is not a folder. This is a key, locating under the folder "Keybd". We have to change the value of this key. Check the path again, pls.
Hope this help.
I cannot change the vaule, I use PHM Registry editor, after soft reset, the vaule back to 0804,not 0407.....why??
sim1 said:
I cannot change the vaule, I use PHM Registry editor, after soft reset, the vaule back to 0804,not 0407.....why??
Click to expand...
Click to collapse
I have no idea. I am using total commander. This is free at here http://www.ghisler.com/pocketpc.htm.
1. Check your programs that running each time you start windows at \windows\startup\. If they change keyboard settings.
2. After changing the registry key value. Do the soft reset by this way: Hold down the power button for ~5 seconds. When being asked to turn off the device, tap Yes. This will completly turn off the device and save the changes in registry. This method may different from taping the stylus to the reset hole.
I dont see Locale either .... would really appreciate any help on changing :
a) software keyboard layout and
b) hardware keyboard layout
pencilcase said:
I dont see Locale either .... would really appreciate any help on changing :
a) software keyboard layout and
b) hardware keyboard layout
Click to expand...
Click to collapse
Check the path again:
The folder: \\\Registry\\HKCU\ControlPanel\Keybd\
The key: Locale.
If you do not see the folder. Create a new folder "Keybd", then create a new key with name "Locale".
I thing this may help.
This is a fix for hardware (real) keyboard only.
Cool. For AZERTY keyboards the value is 040C. My ROM version didn't have Locale value in the HKC\ControlPanel\Keybd, I had to create one myself. It has to be String value, not DWORD. Thank you for great hack.
GUYS! YOUR ARE GREAT!!!
Works perfect with Eng for Russian Keyboard (Russian code is 0419). Now I can switch between Russian and English
yes can confirm 0809 works a treat for english keyboard, thanks!!
Sweet!
Yup! works a treat. Have now changed WM 5 from french to English (which gave me the english keyboard problem) and thanks to you changed the keyboard layout to French. Brilliant. By the way, where could i get the new qtek 9100 ROM 1.6 WWE?
Sorry, but this nice solution is not working after upgrading to 1.6.7.1
This entry in the Registry does not exit anymore. I can only find things whichhave the value "e0010409" for english keyboard and i want to get back my german one. Has anybody that number?
Check again kbaasch
Check the path again:
The folder: \\\Registry\\HKCU\ControlPanel\Keybd\
The key: Locale.
If you do not see the folder. Create a new folder "Keybd", then create a new key with name "Locale".
I thing this may help.
This is a fix for hardware (real) keyboard only.
my keyboard is now ok
oainot
Its works fine, thanks.
I have T-Mobile MDA Vario from German, I have flashed it with ROM: 1.6.7.1 WWE
And, with reg file my keyboard is now ok.
Code:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
MrBuz
Great, stunning solution! Thank you! This is absolutely BRILLIANT !
I have 1.6.7.1 WWE and Russian layout works perfectly...
But the English now lacks a "comma", as the combination "dot+comma" is assigned by the system to switch between layouts.
Is there any solution to re-assign the layout sequence, or to assign "Shift+comma" to print comma (currently Shift does not have any influence on that button on my system...)
Awesome solution.Works like a charm. Can not imaging a better solution. A++++
Fixed permanently?
Cool!
Will this work after hard reset? If not, anyone dare to create a new ROM so that we can flash it and fix it permanently?
Rocks!
hello
I have qwertz keyboard and italian rom
which value i must insert?
tnks a lot
i can try to insert locale key, but when i do soft reset locale it became a directory...
why? i don't understand
the page where i sow the references is because the other doesn't work
http://www.microsoft.com/globaldev/reference/win2k/setup/lcid.mspx

More International Encoding on WM5

Universal is very nice device, but only focused to Major Language and some languages were un supported their encoding on Inbox and IE.
so i made wince.nls with more national language encoding support last year,
I forgot to tell you all and i will do now
the Regional supports are
@WWE version Default Supported Languages,plus
(some of follows already in WWE version, sorry i forgot what was in Default OS)
@Japanese / Korean
@Chinese(Traditional/Simples)
@RUssian(supported by default?)
@Romania @Croatian
@Makedinia @Czech
@Arabic @Dutch
@Azeri(Cyrille) @Estonia
@Azeri(Latin) @Faeroes
@Basque @Finnish
@Belarusian @Fyro
@Bulgarian @Greek
@Catalan @Hebrew
@Hungarian @Iceland
@Latvian @Polish
@Prtuguese @Rommania
@Serbian(Cyrille/Latin)
@Slovak @Solovenia
@Swahilli @Tatatr
@Turkish @Ukraina
@Thai @Urudu(pakisitan)
@Uzbek(Cyllile/Latain)
@add Encoding on IE and Inbox
All of aboves and also
@vietanmese
@Central Europe
@Eastern Europe
@Arabic
@Hindi
@Baltic
@Turkish
@Thai
@Korean / Jpana
@ChineseHebrew
@Cyrillic
@and more.......
But i dont have all fonts for them. you must install your fonts
onto windows folder or \windows\Fonts folder.
ANd another way,
you can create and install on the \Storage Card\Fonts folder with
small application FontsOnSTorage by mr.homing
http://www.yetanotherhomepage.com/j7xx/software/util/fontonstorage.html
i htinks those fonts can be work on your devoce, but not tested by myself all of them
http://www.alanwood.net/unicode/fonts.html
Any way, this is the Strikes Back by Forgotten Nations by WM5 WWE.
PLS enjyoy it friends!
Allahhhhhhhhhh h akbarrrrrr!
Thank you Asukal!
Thanks once more...
Cooked ROM with this patch
**QTEK 130 ROM based****2006-Aplir-23 uploaded*****
Fogotten Nations ROM ---following reginal "wince.nls" and "font"
http://www.asukal.jp/ROMs/Qtek_Forgotten_130.rar (53MB)
hindi, hebrew,Arabic,Thai, Chinese,Korean, Japan, Easteren and Central Europe,
Greek,Vietnamese fonts and encodeing in this ROM,,,,,,already
But i can not confirm they are correct or not,,,,,,
Allahhhhhhhhhhhhhhhhhhhhh h akbarrrrrrrrrrrrrrrrrrrrrrrrrrr again!!!!!!!!!!
Nam Amida-butsu!
shamilsh said:
Allahhhhhhhhhhhhhhhhhhhhh h akbarrrrrrrrrrrrrrrrrrrrrrrrrrr again!!!!!!!!!!
Nam Amida-butsu!
Click to expand...
Click to collapse
thanks Camrade Shamil......
but seems only you need this... ?
Asukal said:
shamilsh said:
Allahhhhhhhhhhhhhhhhhhhhh h akbarrrrrrrrrrrrrrrrrrrrrrrrrrr again!!!!!!!!!!
Nam Amida-butsu!
Click to expand...
Click to collapse
thanks Camrade Shamil......
but seems only you need this... ?
Click to expand...
Click to collapse
Not at all, nice and god job , Asukal
I install to my BA it working very well
Text messages?
It seems like I can't get this to work with text messages (the encoding option in my text message inbox is disabled). Does anyone know how I can get around this problem?
whats language you want to get?
using this rom or CAB files with English ROM?
Is your font in your Device or ROM?
i tried text message in Japanese, Chinese, Korean. Thai Languages in this ROM
How about with check the unicode option?.
Also encoding of IE and e-mail enabled?
SMS doesnt need some encoding if the SMS service center support that.
<but almost of them suport it, within my knowledge>
Asukal said:
whats language you want to get?
using this rom or CAB files with English ROM?
Is your font in your Device or ROM?
i tried text message in Japanese, Chinese, Korean. Thai Languages in this ROM
How about with check the unicode option?.
Also encoding of IE and e-mail enabled?
SMS doesnt need some encoding if the SMS service center support that.
<but almost of them suport it, within my knowledge>
Click to expand...
Click to collapse
I want to get Traditional Chinese on my Vodafone V1640. I also have a T-Mobile SDA (on O2 UK) which has nina.ttf installed but it doesn't show all the characters (i.e. I still get some squares) which is why I want to try to get Chinese on my V1640.
The ROM is the latest i-mate WWE ROM.
I have a T-Chinese font (don't know the actual name of the font but it is definitely no included in the Chinese Windows) placed in the Windows/Font folder, but does it have to be a specific font (like MingLiu? it's quite big though)?
I forgot where the unicode option is. Encoding options in IE and E-mail are available (I can choose the language), but IE still can't display Chinese, despite the change in the encoding option.
Please help.
1; used my CAB right?
this can install wince.nls and enabler for the nls files.
Text message need the sytem font to discribe your languages.
so it means chinese font should be register as "System font"
you have never done that., i guess so.
Ok following the sample of font registry for Mingliu font.
1;way 1 <with the cab in this page>
import this with registry editor and put the Mingliu into windows folder.
and make soft reset, then you can solve all problem.
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
"MingLiu="\\windows\\tahoma.ttf,Tahoma"
"PMingLiu"="\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\mingliu.ac3,PMingLiu"
"Tahoma"="\\windows\\mingliu.ac3,PMingLiu"
2:way 2 <without the cab in this page>
Or you install my chinese enabler CAB.
(but you must uninstall previouse cab befor install thia\s)
http://www.asukal.jp/English/LocalizeCABS.htm
PLS go to the bottom of above page, then dl for the cab you wantt.
cab should be "for the WM5"
those were included registry and font. not mingliuy but chinese font in it.
I don't know any hebrew.
But I think the display hebrew on last pic is not correct,because there are so many same character in one line.
Asukal said:
1; used my CAB right?
this can install wince.nls and enabler for the nls files.
Text message need the sytem font to discribe your languages.
so it means chinese font should be register as "System font"
you have never done that., i guess so.
Ok following the sample of font registry for Mingliu font.
1;way 1 <with the cab in this page>
import this with registry editor and put the Mingliu into windows folder.
and make soft reset, then you can solve all problem.
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
"MingLiu="\\windows\\tahoma.ttf,Tahoma"
"PMingLiu"="\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\mingliu.ac3,PMingLiu"
"Tahoma"="\\windows\\mingliu.ac3,PMingLiu"
Click to expand...
Click to collapse
I use the PHM Registry Editor. Do I just create new "String" values? Also, do I have to create the location in the registry as it isn't there?
The font file is named HDZB_74.TTF by the way.
arabic doesn't seem correct from the screen shot... the right to left encoding isn't enabled which is making each word to print on it's own instead of getting merged
ady> Arabic "right to left", can it solve by registry tweak?
if so can you let me know??? i can not read Arabic acutualy
or the problem of font???
ft1860> i also can not know hebrew, so no way to know about the problem also.
also the problem came from Font or registry???
any way this ROM or cab just gives you wince.nls for encoding.
Hope each languages Experts tweak for detail and font link to discribe
correctly. i just put uni-code font to the demo fro other language which i couldnt read
richardrai>
yes you make new valu. if you think it is troublesum.
1:write your registry with text editor and save it as xxxxxx.reg file.
the head of registry need "REGEDIT 4"
2;use the TRE free registry editre;
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/tre_e.htm
and use import command from menu, them import the reg you saved.
then make soft reset.
if your registry is correct, your font can use as system font
3
Good luck.
Thank you for your effort. Finally there is a solution.
ady> Arabic "right to left", can it solve by registry tweak?
if so can you let me know??? i can not read Arabic acutualy Crying or Very sad
or the problem of font???
Click to expand...
Click to collapse
It may be solved by a registry tweak.
It is an old issue between the customers and the sponsor of I-mate. We have been seeking a convenient free solution to the right-to-left problem for a long time.
Anyway, I don't think the problem is from the font.
There is an example of a left-to-right text on the following link (the flash on the right side). http://www.imaginet-software.net/index.aspx?p=arabizer
Asukal said:
1:write your registry with text editor and save it as xxxxxx.reg file.
the head of registry need "REGEDIT 4"
Click to expand...
Click to collapse
Sorry just want to make sure whether there should be a space between "REGEDIT" and "4"?
No need Space. REGEDIT4 is ok. sorry make you confuse.
Arabic. ;;if some boday help me discribe the Registry, i will make a patch CAb for that.
too difficult to understand me that language
It works on WM5 already?! Hmmm.. the last time I checked it doesn't. Will check it out this weekend finger cross
I think it's font problem. Because even my device does not support display from left to right, my display of Arabic is perfectly correct. I use a font called DFHeiMedium from Dynalab. It is a unicode font.
Asukal said:
ady> Arabic "right to left", can it solve by registry tweak?
if so can you let me know??? i can not read Arabic acutualy
or the problem of font???
ft1860> i also can not know hebrew, so no way to know about the problem also.
also the problem came from Font or registry???
any way this ROM or cab just gives you wince.nls for encoding.
Hope each languages Experts tweak for detail and font link to discribe
correctly. i just put uni-code font to the demo fro other language which i couldnt read
richardrai>
yes you make new valu. if you think it is troublesum.
1:write your registry with text editor and save it as xxxxxx.reg file.
the head of registry need "REGEDIT 4"
2;use the TRE free registry editre;
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/tre_e.htm
and use import command from menu, them import the reg you saved.
then make soft reset.
if your registry is correct, your font can use as system font
3
Good luck.
Click to expand...
Click to collapse

Touch Keyboard/Keypad issue, help required

Hello All, I have the new kitchen rom installed and need a bit of help with the touch keyboard/touch keypad.
When I first start it (say go to programs) and tap on the keyboard symbol I get a nice large standard keyboard with the numbers on top but if I change to any program that requires that requires input the keyboard switches to the XT9 automatically and I can't seem to find a way to disable the XT9 input.
Any ideas????
Hey Iggy, I have a unbranded herald and installed a custom rom with the touch keyboard/touch keypad, and encountered the same exact thing. I wasn't the only one either. I installed the custom rom I was using previously and I didn't have that problem anymore. I think it might be a keyboard bug in that rom you're using. I could be mistaken, but so many people in the herald community forum who installed that particular beta rom experienced that same *annoying* keyboard issue, lol.
Look in the Elf upgrading forum for the original thread by noonski, check on the first page for the link to the fix for switch to xt9 mode (2 letters per key). Just a note if you make the changes to have the full querty stay you will not be able access the other modes, also xt9 will be completely disabled.
Look in the Elf upgrading forum for the original thread by noonski, check on the first page for the link to the fix for switch to xt9 mode (2 letters per key). Just a note if you make the changes to have the full querty stay you will not be able access the other modes, also xt9 will be completely disabled.
aaronsmckee said:
Look in the Elf upgrading forum for the original thread by noonski, check on the first page for the link to the fix for switch to xt9 mode (2 letters per key). Just a note if you make the changes to have the full querty stay you will not be able access the other modes, also xt9 will be completely disabled.
Click to expand...
Click to collapse
Thanks aaronsmckee, found that thead yesterday and the reg fix to disable the Xt9 worked perfectly.
having trouble finding original thread
whats the title of the orgin. thread???
found the file, how do i upload it?? Sorry for being a novice!!! Its on my phone, just don't know where exactly i need to place it.
shadeo5 said:
found the file, how do i upload it?? Sorry for being a novice!!! Its on my phone, just don't know where exactly i need to place it.
Click to expand...
Click to collapse
look for the HTC Touch keyboard/keypad's cab file version somewhere in the elf/elf upgrading forums and copy it into your ppc. then tap it to install the cab. then use a registry editor and go to
HKEY_CURRENT_USER/keyboard layout /Preload/1
change e0010409 by adding characters like XXXXXe0010409 to disable xt9 and make the HTC Touch 40-key keyboard permanent. (you can revert it back by taking out your added characters) BUT what i found was the landscape view does not contain a spacebar key/button! but portrait mode works flawlessly.
Disable XT9
I used this reg file found in this thread http://forum.xda-developers.com/showthread.php?t=344533 it is part of the HTC Touch Keyboard/Keypad file that can be downloaded as a seperate file.
..thanks...
...for you information, now my hardware keyboard is on!!

Dutch language XT9 with 16 key's

Can someone help me to install the xT9 Dutch on a HTC TOUCH DUAL 16 key version?
I tried several options and none works.
I have tried adding the Dutch Language pack, but I am not able to make it work cause the IME file hpd.5x4.Dutch.kdb is for the 20 key layout...
When I install the cab the hardware keyboard starts working like the 20 key keyboard.
If I set the language to Englisch, it works (XT9 and ABC), but I want to use the Dutch-libary.
Can some help me with this?
Here you can find the files and registry settings.
An more step by step instruction in dutch you can find here. With those settings I managed to get my Dutch xT9 working on my 16 keys Dual.
Good luck.
I've installed this CAB:
http://forum.xda-developers.com/showthread.php?t=343106&page=5
This afternoon I want to set the registry settings manually and copy the files you give.
Tnx!
The problem is changed, after I manually set the registry values and after I copy the files manually, I could only type numbers in Dutch.
If I set the language to English, all works fine, but if I set it to Dutch I can only type numbers (this is in xt9-mode and ABC-mode).
Anybody knows how to fix this?
theovds said:
The problem is changed, after I manually set the registry values and after I copy the files manually, I could only type numbers in Dutch.
If I set the language to English, all works fine, but if I set it to Dutch I can only type numbers (this is in xt9-mode and ABC-mode).
Anybody knows how to fix this?
Click to expand...
Click to collapse
what about a danish xt9 for niki pls????
It's fixed now.
I think I've mixt some things files and/or reg-key's

QW-ER-TY keypad cab please

Hi, can anyone point me to where on this forum I can download a QW-ER-TY keypad cab for my p3300. I've searched for a long time but could not find.
Thanks,
Mujeeb
Here they are
DOWNLOAD
You can see how dows it work at:
http://www.youtube.com/watch?v=ngvGfMDIqII&eurl=http%3A%2F%2Fwww%2Egsm%2Dinfo%2Enet%2Fwindows%2Dmobile%2F621%2Dfinger%2Dkeyboard%2Ehtml&feature=player_embedded
Arhangel said:
Here they are
DOWNLOAD
You can see how dows it work at:
http://www.youtube.com/watch?v=ngvGfMDIqII&eurl=http%3A%2F%2Fwww%2Egsm%2Dinfo%2Enet%2Fwindows%2Dmobile%2F621%2Dfinger%2Dkeyboard%2Ehtml&feature=player_embedded
Click to expand...
Click to collapse
Loaded. It works. Thanks! However, I still need the QW-ER-TY type keypad (ie keypad with "Q" and "W" on thesame key, etc. I am using a modified cab that does not include this keypad, and I need it. Many thanks for ponting me in the right direction again
http://www.freewarepocketpc.net/ppc-download-ezinput.html
http://www.youtube.com/watch?v=BAx_jmgq1Mghttp://www.youtube.com/watch?v=BAx_jmgq1Mg
U need to install two cabs, the keyboard and language pack. There is a third cab to install if U want T9 turned off by default, although U can always turn it off manually.
zukae said:
http://www.freewarepocketpc.net/ppc-download-ezinput.html
http://www.youtube.com/watch?v=BAx_jmgq1Mghttp://www.youtube.com/watch?v=BAx_jmgq1Mg
U need to install two cabs, the keyboard and language pack. There is a third cab to install if U want T9 turned off by default, although U can always turn it off manually.
Click to expand...
Click to collapse
EzInput ABSOLUTELY rocks! Thanks zukae.

Categories

Resources