I really did try to read the posts w/o asking for help but there is so much confusing (I don't what G3 or G4 means) and sometimes obsolete info (stuff that looks like it'll work in XP but not Vista b/c activesync is gone, or talking about old versions of this lockiwiz thing) that I feel I have to seek some guidance. Needless to say, I don't wanna "brick" this thing
I'm trying to unlock my phone, but don't know what guide to follow, I'll tell you everything I know and I hope someone can point me in the right direction-
phone: t-mobile MDA
ROM: 2.26.10.2
Windows: Vista Home Premium
Anything else you need to know please ask. I am tech savvy but not when it comes to phones. I might like to upgrade to WM6 afterwards but I'll take this one step at a time. Thanks for reading
Follow this guide (http://forum.xda-developers.com/showthread.php?t=285435), pay attention especially the text in red.
I used this guide
I just unlocked my Tmobile MDAlast night and I used this guide
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
was very helpful
Related
I'm new to all this and a bit confused. I have an O2 XDA Mini S and need it unlocked to all networks and if possible all the O2 stuff removing from it and I want turn it into a bog standard HTC Wizard.
Is any of this possible?
I have been told by HTC that they do not have and BIOS upgrades available for any of there phones and these all come from the rebranding companies such as O2 and QTEK etc.
I know this has probably been covered a million times on this forum but I must be a little stupid or either it's too technical for me as I can't find it in clear black and white Could someone please clarify all this for me and assure me it will work without too mnuch trouble and with little risk of putting the PDA into an UNRECOVERABLE state and point me towards:
a) The exe files and/or program I need to run to do it
b) A set of step by step idiot instructions for me to follow
Many thanks!!
I see a load of people a viewed this but could someone please reply with some/ any info?
To unlock your device to any network follow the instructions in,
http://forum.xda-developers.com/showthread.php?t=249474&highlight=lokiwiz
As far as changing the software read through the threads in the upgradeing section. All the information is there and some very good 'ROMs' put together by people who put a lot of time into helping others.
Good luck
Remember - read carefully, follow instructions, and if your not sure of what your doing DON'T.
Many Thanks!!!
OK I've just run the unlock tool and seems to have gone smoothly. I've put my Vodafone SIM in the phone, it finds Vodafone...but I cant call it and I cant make calls out
Any one have any thoughs please?
What's going on here if it recognises the SIM and connets to a Vodafone Cell, surely it should then be functional....or not?
HELP!!!
If its a pay as you talk chip its out of credit or credit period, phone the network to reactivate.
If its contract it sounds as if the chip needs to be activated again phone the network.
MIZZO1628 said:
I'm new to all this and a bit confused. I have an O2 XDA Mini S and need it unlocked to all networks and if possible all the O2 stuff removing from it and I want turn it into a bog standard HTC Wizard.
Is any of this possible?
I have been told by HTC that they do not have and BIOS upgrades available for any of there phones and these all come from the rebranding companies such as O2 and QTEK etc.
I know this has probably been covered a million times on this forum but I must be a little stupid or either it's too technical for me as I can't find it in clear black and white Could someone please clarify all this for me and assure me it will work without too mnuch trouble and with little risk of putting the PDA into an UNRECOVERABLE state and point me towards:
a) The exe files and/or program I need to run to do it
b) A set of step by step idiot instructions for me to follow
Many thanks!!
Click to expand...
Click to collapse
it didnt work on my xda mini s it just restarted and it still didnt get any signal
sorry wrong thing i was on about the unlock it doesnt work
CAN ANY ONE HELP WITH THIS US BASE MODEL. CUZ I SEE THERE ARE DIFFERENT KINDS OF MODELS AND I REALLY DONT KNOW WHAT PROGRAM TO USE TO UNLOCK THE SIMLOCK FOR THE (US BASE) ONE.ANY HELP WOULD BE GREAT. THANK YOU.
MODEL:WIZA200
USA T-MOBILE MDA
CAN ANYONE PLEASE HELP ME.
THANK YOU
Searh And Read First
First i would advice not to post your im because we dont need it to tell you info on unlocking
Second try to search the the forums but if you dont know what to search for or are lazy to search then her is the guide:
READ FIRST AND AFTER THAT READ AGAIN JUST TO MAKE SURE WHAT YOU ARE GETTING YOUR SELF INTO. NO ONE WILL BE RESPONSOBLE IF YOU MAKE A MISTAKE
For G3 wizards only
http://forum.xda-developers.com/showthread.php?t=285435
but if you have A G4 wizard (a G4 PDA will report an IPL and SPL similar to 2.21.0001 and a G3 PDA will report something similar to 2.21 (notice the G3 doesn't have the trailing .0001) Search around the "Wizard upgrading etc." forum
And a good advice is to search and read the forums and the forum rules (i hope you did read them)
easy way
l called Tmobile cs and told them I was going abro ad to Europe & I ordered/have an European payperMinute SiM...(use another carrier siM For now.example:Boost Mobile,Vodafone, orange, At&t / cingular. Walmart pay go tmobile etc...) easy way!!!They will ask you for a Valid email address & wizard 200 imei #(make sure You get it by going into settings on phone, Sometimes box & sticker in Phone not correct)...2-48 hours later I received a code in my email and wrote down. When you Power off phone switch Sims...when you power on device...white screen will load and display "please enter unlock Code"(not verbatim) More than likely the code will work 99%. CAUTION!!! YOU HAVE 5 CHANCES TO CORRECTLY ENTER CODE (my phone sticker & box ImeI sticker were different From phone settings imei so double Check imei before giVing to tMobile CS...3rd time was charm) phone will Unlock & search for network ! 2 months using at&t pay go between Unlocked sda & mda devices.
That only unlocks the sim...to make any mods, you need to sim/cid unlock...search xda for Lokiwiz, then read the directions carefully. Lokiwiz is actually MUCH easier than calling Tmo and waiting. There is a thread here called "unlocking for dummies" or something like that. Again, use search.
akashastrega said:
That only unlocks the sim...to make any mods, you need to sim/cid unlock...search xda for Lokiwiz, then read the directions carefully. Lokiwiz is actually MUCH easier than calling Tmo and waiting. There is a thread here called "unlocking for dummies" or something like that. Again, use search.
Click to expand...
Click to collapse
Thankssssssssssssss
No easy roads to be found at xda
And yes, as stated...RTFM's!!! The wiki's and stickies are there for a purpose. We at xda are not responsible for anything you attempt, and therefore it really is the best to learn anything and everything you can about your device before trying any modifications. READ READ READ, be dilligent and don't take the easy way out or you are likely to turn thAt expensive phone into a pretty designer paperweight!
hi all, this is my first post but have been viewing a while,
im not sure an upgrade is what i should be looking at and have never done this before,
to avoid bricking it i would like to ask a few questions if you can help that would be excellent,
1. i have a standard out of the box o2 xda orbit that i purchased from car phone (you know the shop) and it came unlocked to any network, its obviously running the o2 version of WM5, im using a vodafone sim and have followed various settings to try get my gprs/mms/internet working but just cant get anywhere,
will upgrading to a different rom help this.
2. what is the best rom out there for this phone and where can i get it
3. i seem to find the forums scattered with instruction i have searched and tried to compile some sort of understandable document but im reluctant to use it incase i have missed something in my search,
is there an easy to follow newbies guide out there, if so can you point me in the right direction,
i am on other forums for different things and im aware of the etiquate of asking for information thats already there, i have searched but i dont want to turn this phone into a brick just because in my search i have missed a step that i was not aware of in the first place,
i hope you can all understand why i have asked this question, some that have bricks might and others with the knowledge may not, lol, well dont those people,
all the best and i hope this will be a good start for me here,
Eddie
Hello to everyone, A quick introduction - Im new to the PDA Place if you could call it that, I personally use a Nokia N95 at the moment, And just the other day managed to get hold of an o2 XDA Exec second hand. Unfortunatly for me the devices appears to be in chinese when turned on so as you are aware theirs is not exactly much I can do with it!
I am familiar with the flashing process on Symbian phones and have done it a few times, With this knowledge in mind I thought and assumed I would need to flash this XDA Exec to an english firmware, or ROM as it seems to be called around here. I have been reading through a few threads in regards to updating and have also tried to download a new update off the o2.xda website, But it seems to keep saying I have an incorrect IMEI Number even though I have entered the correct one by typing in *#06#
I found this forum and was hoping perhaps someone would be kind enough to help me in regards to the problem I am having. I believe this device has Windows Mobile 5 and have seen and heard that Windows Mobile 6 has been released. I assume you have to purchase this much like you have to purchase a new copy of windows for a PC. Is this correct?
I had a go at the flashing process, And downloaded this EXTROM Unlocker from a buzz site? I didnt know what to do with it as its a .cab file so I downloaded KDSkamal WM5 Ultimate edition and thought well if I can at least get it to english then its a starting point at least. I double clicked the file inside and went through the update process, Then it said that it was not designed for my device, And this is where I am upto because im lost with what to do now.
Any help, information and/or advice would be most appreciated.
Thanks in advance
Hi there, whenever you try to change the ROM of one of these new Windows CE devices (all those names are the "marketing geniuses" ideas, PocketPC, Windows CE, Windows Mobile), the device verifies that you are installing the "right" type of ROM for your device, as uncle Bill would say, you cannot put anything that you shouldn't suppose to, and by "suppose to" I mean anything that they don't want you to do, I think it's enough on politics.
Anyway, if you try to change the languaje of your ROM, the bootloader will not let you to do so, so we use an special (treatened) kind of upgrading tool.
It is normally inlcuded in the ROM.
If you read the wiki, you should be able to find the whole process, well explained, right now I just can't remember the exact name of this file (something like noIdUpgrade, MaIdUpgrade, or something like this), normally all our programming gurus supply it with the cooked ROMs.
I know how frustating it is at the begining (also considering that you know Symbian), but consider that these questions arise too many times and people get the idea that you come and ask the same question that literally have been answered thousands of times and you don't even want to make some research work.
Again, read the WiKi, it's the perfect place to start with your device, when you get to know some of the jargon, you'll begin to understand many of the things discussed here.
cheers and good luck
Thankyou for the reply, I shall indeed read the wiki. Since I posted that I managed to get hold of an o2 update ROM which I tried to install, as it was doing it where it says do not disconnect it came up with ERROR 101, and that the cable had been removed when it had not. I also tried again and the same thing, Now the PDA wont turn on at all. If I try to press the hard reset buttons it says press 0, but then does nothing. At the moment it seems to be stuck on the bootloader I think you people call it. And wont come out of it :-( looks like I broke it already
Ok, quick udate after alot of messing about and research I finally flashed it, Its now on the newest version of the o2 firmware. Though now its full of o2 rubbish. I tried to install this custom one I pointed a link to in a previous post but when installing it says its not designed for my country. I assume this is in line with your reply but I tried a search for that program and it turned up nothing.
vwrmic said:
Ok, quick udate after alot of messing about and research I finally flashed it, Its now on the newest version of the o2 firmware. Though now its full of o2 rubbish. I tried to install this custom one I pointed a link to in a previous post but when installing it says its not designed for my country. I assume this is in line with your reply but I tried a search for that program and it turned up nothing.
Click to expand...
Click to collapse
Yes, O2 is full of crap. Try this thread: http://forum.xda-developers.com/showthread.php?t=320116
As I suggested in it. KDSKamal's ROM is the best. Better than official ROMs. You can find links on how to upgrade in that thread too.
---
Hey i had exactly the same problem as you, just bought an O2 Xda Exec in China, and all in Chinese but now I changed my Chinese WM5 to the KDSKamal's ROM, it works perfectly, and it seems stable.
Excellent, Thanks for the replies! I had a good play with it last night web browsing and such, I must say its so much easier than a Nokia N95 I love the software and such on it, Now if only there was a PDA/Phone that had the specifications of an N95 that would be great! I know there is the HTC Tytn but that only has a 2MP Camera I believe.
Anyway I really am pleased I got it working thankyou to everyone.
Now I know the basic process I would like to take it a step further and upgrade to Windows Mobile 6. Is there a way of doing this? I assume I need to get hold of another ROM, I admit I had a look around and found some dead links I assume due to copyright issues with Microsoft but im not sure.
Another question I had, Was I was looking around games you can get games like Riven (Myst series) And Age Of Empires which look just like the PC Version! Wow im overwhelmed by all the stuff you can get. On some of the games I have been looking at it says you need a certain graphics chip or higher in your device, May I ask what is in the Xda Exec? And if its a 3D Graphics chip thats good at running games.
How would I find out if the device is unlocked? Just popping in a card and trying? As I have a contract with T-Mobile where I get free internet, So it might be worth using my T-Mobile sim card on it instead of on o2.
The case isnt in the greatest condition, The screen and keyboard are perfect but there are a few scratches and blemishes on the case of the PDA, Is there an easy way of changing this and buying a new one to swap it with? I know it involves taking the machine apart which im comfortable with doing, Preferably getting a non o2 one would be great.
I hear about the radio and such, Does this device have a radio built into it?
Also is there anywhere I could either purchase a copy or download a copy of the manual? Im not sure how this device actually turns off, It seems to just go into standby mode when I press the power button.
Other than that, Thankyou very much so far!
again check the wiki my friend.... all answers to your questions are already posted there...
hello. i just got hold of a t-mobile vario 2 (htc tytn). it is unlocked and is running wm6. i have installed a spb shell which i really like but as i read more and more it seems there is much to be learnt about this little machine.
anyone have any pointers as to where to start?
i would like to flash it so all t-mobile branding such as bootsplash and OS elements are gone. also i would love to know more about upgrading it with roms/software etc.
my main worries are of course wrecking it. i also want to know if flashing/upgrading it will mean having to reinstall OS or unlocking again??
thanks for any advice. i have come into this late i know....
Try My Tutorials
mredvers said:
hello. i just got hold of a t-mobile vario 2 (htc tytn). it is unlocked and is running wm6. i have installed a spb shell which i really like but as i read more and more it seems there is much to be learnt about this little machine.
anyone have any pointers as to where to start?
i would like to flash it so all t-mobile branding such as bootsplash and OS elements are gone. also i would love to know more about upgrading it with roms/software etc.
my main worries are of course wrecking it. i also want to know if flashing/upgrading it will mean having to reinstall OS or unlocking again??
thanks for any advice. i have come into this late i know....
Click to expand...
Click to collapse
Take a look on my Tutorials they will show you how to Unlock and everything after you do that you will be able to do anything
Good Luck
thanks! i really need to understand more about what cid and sim unlocking is/does...what will happen if i do this and what i can gain.. as you can tell im very new to all this. i know my way around a pc pretty well but this is new to me.
main questions i suppose are:
1 what is a radio ?
2 what will i gain by flashing it?
3 will i lose anything ?
4 what preperations do i need beforehand? (using xp pro sp2)
5 what are the best roms/software ?
mredvers said:
1 what is a radio ?
2 what will i gain by flashing it?
3 will i lose anything ?
4 what preperations do i need beforehand? (using xp pro sp2)
5 what are the best roms/software ?
Click to expand...
Click to collapse
1. Check This Out. Radio
2. Same Link As 1.Radio
3. Nope
4. You will need activsysnc for windows XP. i think it is 4.5.
5. Best roms...really depends on your phone and what OS you want on it. U can get WM5,WM6, or the new WM6.1
cool... sorry to ask questions like this.
i am pretty happy with it so far using wm6. really just want to get rid of the t-mobile branding and get the most out of it.
thanks for your help.
going to do some reading up on those links!
mredvers said:
cool... sorry to ask questions like this.
i am pretty happy with it so far using wm6. really just want to get rid of the t-mobile branding and get the most out of it.
thanks for your help.
going to do some reading up on those links!
Click to expand...
Click to collapse
Yep No Problem. Here To Help!
Mr Edvers,
You definitely need to look here....http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
WB
woaahhh... thats exactly what i was looking for.
thanks very much!! i will report back after i have a good fiddle with my hermes.
TyTN UPGRADE TO WM6 ETC
Hi, I've been reading through many forums and I know your fantastic experience of pocket pc matters really blows my mind away! Sooo bad that I'm left really confused!
So, as a complete & utter pathetic novice that I am, would you be so kind enough to just read my little plea for help?
I have a TyTN200 Hermes with WM5 BOUGHT SIM FREE
1) ROM VERSION: 1.18.225.3
2)ROM DATE: 07/22/06
3)RADIO VERSION: 32.34.7010.01H
4)EXT ROM VERSION 1.18.255.106
I would like to update to WM6 & did go through the procedure of disabling USB part on the WMDC & downloading the USB driver. But when it came to installing the driver, it kept coming up:"the best driver is on your computer".
I've tried 100+ times to install the update WM6 but the answer is always the same:"Error 260".
HTC do not care & their London "Hotline" is a laugh!
What confuses me is this "cookin'"; "kitchen"; and this constant "Flash"??
Would you be so kind to just say the following:
1) what should I deal with first to get the upgrade? Radio?
2) Kick my butt for getting a expensive pocket pc that even the manufacturer cannot be bothered helping poor novices.
mredvers said:
woaahhh... thats exactly what i was looking for.
thanks very much!! i will report back after i have a good fiddle with my hermes.
Click to expand...
Click to collapse
There is a half way house if all you want to do is remove t-mobile bloatware. Perform a hard reset and at the point where it says installing operator customization (quite far through) then stick your stylus in the soft reset hole. With this method you avoid flashing a new ROM and no need for any expertise. If you then don't like the result you just do another hard reset and let it install everything again.
Of course if you are tempted by some of the ROMs noted around here don't let me put you off flashing a completely new ROM For this purpose I suggest looking seriously at MrVanx guides.
Mike
beegeebopper said:
Hi, I've been reading through many forums and I know your fantastic experience of pocket pc matters really blows my mind away! Sooo bad that I'm left really confused!
So, as a complete & utter pathetic novice that I am, would you be so kind enough to just read my little plea for help?
I have a TyTN200 Hermes with WM5 BOUGHT SIM FREE
1) ROM VERSION: 1.18.225.3
2)ROM DATE: 07/22/06
3)RADIO VERSION: 32.34.7010.01H
4)EXT ROM VERSION 1.18.255.106
I would like to update to WM6 & did go through the procedure of disabling USB part on the WMDC & downloading the USB driver. But when it came to installing the driver, it kept coming up:"the best driver is on your computer".
I've tried 100+ times to install the update WM6 but the answer is always the same:"Error 260".
HTC do not care & their London "Hotline" is a laugh!
What confuses me is this "cookin'"; "kitchen"; and this constant "Flash"??
Would you be so kind to just say the following:
1) what should I deal with first to get the upgrade? Radio?
2) Kick my butt for getting a expensive pocket pc that even the manufacturer cannot be bothered helping poor novices.
Click to expand...
Click to collapse
Sorry it's me again, but I'm still trying to get this damn update on my phone!
I've searched high & low, (probably not enough), but all this lingo is new to me.( and givin' me a headache!) The threads I've read always seem to mention a phone that's been provided by a network (orange,o2 etc), but is a SIM free phone already unlocked 'cos it can take any SIM card form any network?
I still get error 260 & I've checked the ports & it seems fine to me, but obviously it isn't. So where do I go from here on the Vista I have? I've used a neighbours XP & it was the same there.
Can anyone help please?