I have a nice Tytn with WM6 (and a few gadgets)
I'm trying to use a perfectly working bt headset by motorola, I can find the device but after pairing it I find no "SERVICE TO USE" related to the device (could be incorrect, actually translated from the italian "Selezionare servizi da usare nel dispositivo")
Do you experts think this is some kind of sw problem or could it be that my "second hand used but perfectly functional Tytn" is actually defective ?
I worryed !!!
Bye
Marco
Related
I got my S200 back from a repair and it was also upgraded form G3 to G4.
Everything seems to work fine, except my Jabra BT500 head set. After pairing with my S200 I got a very cracking sound.
So I checked my Jabra with another mobile phone and it worked very well. I checked another head set with my S200 and again a cracking sound.
Does anybody knows how to solve this or do I have to return my S200 again for repair?
Hi, I have excatly the same problem, it also occurs with the bluetoothof my car...anyone can help us?
I have returned my S200 to QTEK today in order to have it repaired (again).
I have tested it (in my car) with 2 other Bluetooth headsets and there was no problem. There was also no problem when I tested my own headset on another phone. So this proves that my S200 has some kind of defect.
The sound is very crappy ?
Or is the soud quite ok, but experiencing high frequency glitches, kind of metallic parasits?
Because in that case, there is nothing to do, It's due to the MS bleutooth stack which has a very poor encoding librairy... and since there is no widcomm stack for S200 (and some other qtek too, a lot of people is yet trying to malke it work), then evey bleutooth headset will have bad sound in A2DP with the S200 :'(
One of the main reasons why I want to change for a widcomm stacked pocketPC (shame on MS!!!!!!!!!!)
For me, the quality is very bad. At the beginig I use it only on my car and it was working perfectly, since I try to connect to the bluetooth headset or to my computer the sounds became very very crappy. I have Dopo ROM, which rom do you have? what ROM do you advise? Thank you
I have tried the LVSW, Jester and shipped ROMS and all these ROMS have the same problem. So I think that it is not related to the ROM but due to bad hardware components.
it's strange because it was working for me before I use other bluetooth device. I will try to upgrade the rom to the official QTEK ROM
I have the same problem. As if the bluetooth signal were cut per moment.
it's not linked to roms, but to bluetooth stack, so since the bt stack is updated (but I doubt it), changing roms won't help
I could fix it, I update the ROM, delete all pairaing on my cars... I change the "hsotname" of my QTEK on "settings - Owner information" I recreate the pair and it works fine on my car, now crappy sound anymore. Just to test it again, I try to pair my "fujitsu laptop" to my qtek, since I did it, the sound is again very crappy. So I will flash again and pair it only with my car. If I return it to Qtek it takes 1 months... If someone can fix this that would be great.
Hello, i have a qtek s100, i need your help.
I have vey problems with bluetooth stack. The bluetooth ican in the right bottom is always in grey. When tray to connect to any bluetooth conection mi qtek say "No Hardware bluetooth instaled".
I try to flash with varius versión rom but i have the same problem with all.
Is really a Hardware problem??
Thaks for all
http://forum.xda-developers.com/showthread.php?t=235588&highlight=bluetooth+hardware+error
think thats the one ya looking for
Hello all, I have upgraded to Sharps 4.0 but the bluetooth in teh car still does not work. Carkit finds the phone and calls to connect, however there is no answer from the phone to give the code.
Can any body help. This did not work with original WM5 from T-Mobile and still does not work wit WM6
Thanks in advance for the answer to solve this problem
I have a similar problem with my TyTN and Pioneer DEH-P75BT, and i found this post...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=P75BT
With this changes in registry, my TyTN connect with headunit tottaly correct.
Hi Developers.
I am trying to use my 614c connected to Nokia CK1-W carkit via bluetooth. The problem with this is that during any conversation the person on the other side hears horrible echo of everything he says.
Does anybody knows the solution for this problem ?
Thanks
Krame
try
start/settings/sys/audio/mic
uncheck the "enable AGC"
save by tapping ok to exit & sr
Checked this weeks ago.
This makes thing even worse.
I am thinking rather about some registry tweaking with mic sensitivity or swithing off when connected to car kit.
Marek
what is your rom VER ?
It is now WM 6.1 (CE OS 5.2.19965.1.2.3) that is ROM downloaded from our Russian friends. But I had the problem before updating too.
BTW: is there anywhere a more comprehensive bluetooth stack than this available in WM ? It is completely unconfigureable !
Hi there,
sry for my bad english...
I already got a Pharos from my company and I installed a navigation software which works quite fine. the other day I purchased a bluetooth TMC module to get the latest traffic news for the route calculation. this module operates with the SPP (serial port profile), but the Pharos (with standard WM 6.0) doesn't support that profile. I get a bluetooth connection but the tmc module is not recognized correctly by the Pharos.
is there any possibility to unlock these bluetooth profiles (so that I can use this tmc thing), or is this not working because of the hardware? I'm, sry but I am not that professional in these things
thx in advance
what version of pharos you have? traveller 127 0r 117 ?
I'm sry, but I don't know...
It's a HTC P3470 and if my informations are right, it must be the Pharos, or not???
nobody any ideas???
maybe with an update to 6.1? can somebody confirm that?
thx in advance
does anyone know if it is a Hardware issue or is it possible to activate a bluetooth profile with a Software update?
Sperti said:
Hi there,
sry for my bad english...
I already got a Pharos from my company and I installed a navigation software which works quite fine. the other day I purchased a bluetooth TMC module to get the latest traffic news for the route calculation. this module operates with the SPP (serial port profile), but the Pharos (with standard WM 6.0) doesn't support that profile. I get a bluetooth connection but the tmc module is not recognized correctly by the Pharos.
is there any possibility to unlock these bluetooth profiles (so that I can use this tmc thing), or is this not working because of the hardware? I'm, sry but I am not that professional in these things
thx in advance
Click to expand...
Click to collapse
I don't have a TMC module, but there is a "COM PORTS" options in my BT setup. Did you try that? I am using CE OS 5.2.1944 (Build 18547.0.7.3)