Related
http://www.pdamods.com/products.asp?cat=23
Has anyone ordered this and tried it on a Vodaphone VPA ? Does it work ?
Thanks in advance
Got one in my car, works a treat for holding and charging it. The cradle's also got a telephone-socket-like port for a Serial GPS, but I use bluetooth so I've never used it.
Hi
Yes but which PDA do you have ? Is it a Vodqphone VPA ?
You posted in the "Himalaya & Andes" section, I'm using it with an XDA II.
Take a look at Brodit mounts on www.handnav.co.uk , you buy the type of holder you want for your PDA (powered/basic etc..) then buy a clip designed specifically for your make/model of car.
Each one is designed specifically for each car and just clips on to dash trim without screws etc..
Top notch kit
The one posted above uses a suction mount on the windscreen, been on for almost 2 months now and it's not fallen off once.
Ok, apparently it doe snot work with the Vodafone VPa, bu they have sent me one for this model and that works fine
check out a device called a berry from a company called SPcomms
Works with the XDAIIi and other models. really funky toy
.....Hi all, Just seen threads as to where you can get the Brodit cradles for the exec/Jasjar and now the new xda mini s etc from...........
Just letting you all know I have the Brodit XDA etc passive holders available for sale and the active charging versions too.........passive are £20.00 inc 1-2 day postage, special delivery at £4.99 by arrangement.
The active ones across the xda range are between £36.00 to £45.00 depending on model 1-2 day postage inc. (add £4.99 for pre arranged guranteed next day delivery) Not all older models are in stcok every day, so email to check is helpful so you not disappointed.
if you also need a brodit pro clip for your car, I have those also for £17.00, inc 1-2 day postage, or again £4.99 next day. or a gooseneck for £16.00,with Brodit compatible face plate.
I have most car makes for the pro clips in stock, if not I can get them sent direct next day.
PM if you wish to ask any questions or order one, via paypal.
Cheers all,
Bryson
www.dsldevelopments.co.uk for cradle search and pro clip search & online purchase.
Without trying to not to sound like a prick, but is the active holder, just the same holder but with a car charger, or maybe a car carger that maybe fixed to the back of the mount with a little lead you plug into the usb charging socket. By fixed i mean just to make it look neater, there is no power into or out o the holder
Hope that makes sence
John
i'm interested if it offers any GPS power plug in addition to everything else, this way it will be extremelly useful.
thanks.
The Brodit kits available are' passive ' only, as in they only hold the Exec, no inputs for chargers via the mini usb, and no one has yet built a product for a wired GPS or even a dual charging unit for Exec and GPS charging, as in the old arkon style kits. (wired GPS will not yet work via mini usb on the exec)
These are simply passive holders, where you use a cigarette lighter with usb port to mini usb to charge the device(using the supplied cable from o2 or buy an additional usb to mini usb lead)
The active holders are simply as above, but they have the cigarette lighter point to mini usb built into the cradle.........
hope that helps!
Just ordered mine... I'm trialling it for the company in my own vehicle whilst hoping our code monkeys can get our fleet / task management system working on WM 5.
Stand by for updates and photos.
Would you please post a picture of the holder.
Thanks
Report on Pocket GPS World here:
http://www.pocketgpsworld.com/modules.php?name=Forums&file=viewtopic&t=30758
Hi Again,
Had a lot of enquiries, and stocks running low again, so need to know if anyone wants any so I can increase order from Supplier. They really do look and feel great, had the first few satisfied customers for this holder.
Thanks again
Are yours the modified one that now have a left speaker slot as shown on the above PocketGPS link, or do they have the speaker covered, muffled and therefore reducing in-car volume for SatNav considerably?
I was one of the first official suppliers in the UK, I got the 1st shipment a few days ago. Not heard of this as an issue on the ones installed, and certainly not in my car, but I have re-ordered additional stocks so after the posting on http://www.pocketgpsworld.com/modules.php?name=Forums&file=viewtopic&t=30758 this has been rectified by brodit
Thanks, but sorry, it's not clear if the ones you now have in stock are rectified or not? :?
sorry for the confusion, as I stated, I had one of the first deliveries before this issue was noted by Brodit. My stock is exhausted of the 1st versions (no dual speaker hole) My new stock on order, due in next week has the modification.
JJ mount
Hi Bryson
Can you also send to the US ?
I would like to buy one from you. It seems like I can't get it anywhere in the US.
I would like to have the new one (with the hole for the left speaker).
How do I order ?
Re: JJ mount
sagig said:
Hi Bryson
Can you also send to the US ?
I would like to buy one from you. It seems like I can't get it anywhere in the US.
I would like to have the new one (with the hole for the left speaker).
How do I order ?
Click to expand...
Click to collapse
US orders: www.proclipusa.com
I can ship to the USA no problem, but i suspect the cost of shipping might be expensive compared to sourcing internally. However, happy to help if you need it.
Thanks
Proclip USA does not currently have any of the Jasjar/Exec mounts in stock. Only the K-Jam ones. Probably because the Jasjar is primarily a European device. I asked them and they do have some on order and may be in later this week.
Heard from Brodit, production started last wednesday on the new stock, inc official release active holders. Availability to the UK should be some time late this week/early next. This means deliveries may take a few days more than hoped from me. Sorry.
What about Me?
Hey Bryson,
M8, im from India and i am intrested in buying a pda holder for my i mate jasjar + mounting kit (i dont want to make holes in my car). Now, will this whole kit be compatible with my car ford endevour (SUV..indian make)? how much would it cost? I have 10- 15 people who are looking to buy the same thing. please help.
Nish
Hi Nishant,
Ive sent you some details via PM, please let me know what you think,
Thanks again,
Bryson
PS To ALL - I now have the Gooseneck mounts available if you prefer that to Proclips for the Exec/Jasjar etc cradles, again, PM to enquire. Thanks!
Hi All again, furhter to PMs and messages I now have stock of the Brodit ACTIVE Exec cradles and still Passive cradles available.
Please PM me if you are interetsed.
Many Thanks
Bryson
Hi! iam planning to buy a cradle(with gooseneck option) for jasjar to use it in my car. i have looked for few options but if some 1 has had them can guide me better as to buy which one? i have had a talk from some 1 called david soppelsa(from U.K, using bryson as his id on this website) . He is selling brodit cradles..i wanted to ask if some one has brought the same from him? How are the brodit cradles? Your suggestions would be highly suggested.
Nish
I have a brodit passive cradle and it is great holds it very secure
I use the proclip (brodit versions in usa). I don't like the goose necks as they tend to move/vibrate a lot. The proclip have specific mounts for specific automobiles which fit and take only a couple of minutes to attach.
Allows you to use the universal in either landscape or portrait mode. I hook a cassette sound adapter to the uni's headphone jack and listen to mp3's or listen/watch tv via orb.com over my car speakers.
thanks for suggestions guys, but i have an suv ford endevour and they dont have a clip for that.. so no other option then goose neck..has any 1 brought any stuff from the above named guy?
Nishant
You can connect the Brodit/Proclip holder to a windscreen mount - there are conversion adapters between the HR system and Brodit.
You can also send a request to ProClip/Brodit to include the Endeavour in their offering.
Is there a decent one out there that will accomodate the screen being opened, will hold it landscape as well as portrait etc...
Info please...
Hermes car kit for the Kaiser?
Can anybody tell me if the current Hermes car kits will fit the Kaiser?
I contacted Proclip and the said they have them in production and will have them no later then November but hopefully sooner. They are in my opinion the best out there.......no I don't work for them!
www.proclipusa.com
Brodit said a similar thing to me in an email. A couple of weeks.
Of course they did -- Proclip is the US distributor for Brodit.
For what will probably be a less expensive solution check out http://www.4ustuff.com/product.php?mode=9&search=htc+tytn+ii -- they're a manufacturer & sell only in the wholesale market.
3waygeek said:
Of course they did -- Proclip is the US distributor for Brodit.
For what will probably be a less expensive solution check out http://www.4ustuff.com/product.php?mode=9&search=htc+tytn+ii -- they're a manufacturer & sell only in the wholesale market.
Click to expand...
Click to collapse
Since they sell only to wholesalers...how do you propose we buy from them?
I don't -- just providing a preview of coming attractions.
This universal kit works well ... especially when you want the keyboard out
http://cgi.ebay.com/Car-PDA-Phone-H...yZ130797QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
~~~
Something that I dont like this kind of universal holder that uses a "spring", where there is a button to release the grip ... the spring will not tight anymore after let say several months.
And I am really afraid if it is not tight, the car bumps into something on the road and then the beloved PDA jumps out of the holder ! It happened several times.
I am not sure with Brodit / Proclip brand, can you share your experience?
I use one from Arkon and the spring is loose now. So, I removed the spring and glued permanently, cut the grip to make it fit for the Kaiser. It is ugly (really) but it can now hold the Kaiser very tightly.
Never had a car kit before, always had a pocket in my car perfect for a phone. Changed car now though and need some sort of holder. Also want to do away with my Bluetooth headset.
Does a kit exist where you put the phone in the cradle, and it both charges and connects to a car head unit/microphone. Obviously not for the Kaiser yet, but if its available for other phones, it will for this in time.
Know some executive cars have this built in and some companies cater for the aftermarket, but they seem to want hundreds. Am capable of installing said kit, just need a place to buy!
How about a Bluetooth car kit? they are available for most cars and head units (be it third party or factory fit units). and you aren't tied to a perticular phone or even make of phone.
gogol said:
Something that I dont like this kind of universal holder that uses a "spring", where there is a button to release the grip ... the spring will not tight anymore after let say several months.
And I am really afraid if it is not tight, the car bumps into something on the road and then the beloved PDA jumps out of the holder ! It happened several times.
I am not sure with Brodit / Proclip brand, can you share your experience?
I use one from Arkon and the spring is loose now. So, I removed the spring and glued permanently, cut the grip to make it fit for the Kaiser. It is ugly (really) but it can now hold the Kaiser very tightly.
Click to expand...
Click to collapse
The man speaks the truth - i nearly crashed as i swerved trying to catch my bloody Uni!
lol
dangerous things.. need an alternative!
I like this one
http://www.kidigi.com/Car CHT 9000.asp
as it is much smaller than the mounts which also contain a speaker built into the mount itself. I find these to be fugly and way too bulky.
Also, this is easier to take apart on the end holding the speaker and wire around it so I can run it into my AUX jack in the car. I also have a mic tucked away above the rear view mirror, have wired a spare power socket in the glove box, and tuck the wires under a kuda mount on the dash. It's a very clean look and almost appears original equipment.
All I do is cradle my phone when I get in the car and I have MP3 tunes through the stereo. When a call comes in, I just hit the answer button on the phone and the mic kicks in, while the call comes through the speakers. IMO, better than BT because I can also play my MP3s wihtout having to resort to a downgraded music signal via an FM receiver.
I've been using a very similar setup with my 8125 and also pair to a Bluetooth GPS reciever, which will now be built into my soon to arrive Kaiser Works vey nice.
Downsides? Unless I put some kind of rotation dvice between the kuda mount and the kidigi, landscape mode is a no-go. Could possibly use the seidio model for this at the expense of some additional bulk, but it looks like they have stocked out (www.seidioonline.com). It's also pretty solidly mounted, so if you like the idea of a gooseneck that can be adjusted on the fly, the kuda would not work well.
funkstar said:
How about a Bluetooth car kit? they are available for most cars and head units (be it third party or factory fit units). and you aren't tied to a perticular phone or even make of phone.
Click to expand...
Click to collapse
Was tempted by that, but if i need to run cables in the car to charge the phone, thought i might as well put one to the speakers/mic too. Im lazy too, dont want to get my phone out and turn bluetooth on and off every time i get in and out the car
Jgermuga - So connecting the original cable from that mount that leads to the speaker, to the Aux in on your HU, when the phone rings will it automatically switch to Aux and send the call audio to the speakers or do you have to switch it to aux on the HU and then answer the phone?
Schooleydoo said:
Jgermuga - So connecting the original cable from that mount that leads to the speaker, to the Aux in on your HU, when the phone rings will it automatically switch to Aux and send the call audio to the speakers or do you have to switch it to aux on the HU and then answer the phone?
Click to expand...
Click to collapse
I need to switch over to AUX on the HU, but still easier than enabling BT on the phone, especially when driving. Plus, unless BT is turned on when the call comes in, I am not sure there is a way to force the connection to go to hadsfree via the car. My change over might involve manual intervention, but it is easy to just ask the caller to hang on a second, cradle the phone and switch over to AUX.
I find it a lot less distracting than trying to get at the BT screen, enable BT, switch to phone pad, hit softkey for menu, enable handfree, and hope I don't hit any buttons inadvertantly, or wind up dropping the call. I have also had the call go into limbo where I had to end it and redial... Trust me, BT is great for headsets, syncs, A2DP, etc, but I am still not thrilled with how it works in the car.
And having it hardwired is pretty impressive when I hit the Voice Command hot button on my phone, say "Play, Dave Matthews" and off it goes!
I had wizard with which i was using holder from Herbert Richter system.
not being disappointed with the quality I'm buying another one for Kaiser.
gps4less have them on ebay for a nice price.
jgermuga said:
I need to switch over to AUX on the HU, but still easier than enabling BT on the phone, especially when driving. Plus, unless BT is turned on when the call comes in, I am not sure there is a way to force the connection to go to hadsfree via the car. My change over might involve manual intervention, but it is easy to just ask the caller to hang on a second, cradle the phone and switch over to AUX.
I find it a lot less distracting than trying to get at the BT screen, enable BT, switch to phone pad, hit softkey for menu, enable handfree, and hope I don't hit any buttons inadvertantly, or wind up dropping the call. I have also had the call go into limbo where I had to end it and redial... Trust me, BT is great for headsets, syncs, A2DP, etc, but I am still not thrilled with how it works in the car.
And having it hardwired is pretty impressive when I hit the Voice Command hot button on my phone, say "Play, Dave Matthews" and off it goes!
Click to expand...
Click to collapse
Sold!
So, i buy this, cut the speaker/charger off, i then need to extend the cables, one to a 12v, one to a mic and one to my aux in? Never tried anything like this before but willing to give it a shot. Any generic eBay mic do the job?
Car Holder
I have had good luck with Herbert Richter with my Vario and I have just bought the cradle for the Vario III and I imagine it will be just as good, they are great quality and do the job straight out of the box.
http://cgi.ebay.co.uk/T-Mobile-MDA-...ryZ75447QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
If anyone is interested. They do vent, bike, suction based holders so look at other items.
Russ
does anyone make a car adapter that is compatible with a weighted friction mount?
Garmin devices have this thing called a friction mount that is weighted. basically the underside is a soft rubber material that keeps the base from moving, and it is filled with about a pound (1/2 kilo for those across the pond) of sand. the base is very sturdy. i have taken many trips with this base with no movement at all.
http://www.amazon.com/Garmin-Portab...5?ie=UTF8&s=electronics&qid=1191742690&sr=1-1
My guess is that Garmin are the only one that would likely make any further attachments as they hold the copyright etc, seeing as the HTC devices are competition for them in so much as the TomTom/Copilot route then I dare say it would only be 3rd party taiwanese/chinese companies that are likely to risk breaching the copyright to make such holders to fit on.
Russ
I've just bought this off ebay:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=140294161361
I had a similar car kit for my prophet for gps navigation. it's not a hands free kit though. it had an inbuilt speaker so you can hear directions clearer and you can charge at the same time.
this seller is selling one with out the fm transmitter for approx the same price, so went with this for the fm transmitter. Hope it works ok... not a real fan of the swan neck design, prefer the angled neck as in the picture. This guy is selling it a bit cheaper than other sellers with the same/similar product. Other sites like brando were selling it for a lot more. There is the original HTC or other cheaper products, but no speaker.
Will review it once i get it, really hope it works ok like for my prophet...
wanwarlock said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=140294161361
Click to expand...
Click to collapse
Wanted to take a look cause I'm looking for a nice solution but the link already returns :
"This item has ended with Buy it Now."
that's because i bought that. hehe
you can go and look at the sellers other listings. he has 2 kinds of these as i said above, 1 with speaker/no fm transmitter or 1 with speaker/fm transmitter.
Don't quiet understand the listing:Ca
Item # 130282049119 HTC Touch Pro FM TRANSMITTER CAR MOUNT KIT CHARGER $ 19.99
Flexible goose neck included
Item # 120354898072 Car kit for HTC Touch pro FM transmitter + charger $ 27.99
Flexible Gooseneck included
But both show a swivel mount (which I do like much better) and both items look the same
In case the item # disappears, sellers are zhoujing0209 and turbo-express
Can one clarify?
i think they maybe just copy & paste the descriptions. my seller is different than the 2 you listed. turbo-express was the most expensive 1 that i found including shipping.
yeah i like swivel as well. i think they all get them from the same supplier, hence the same 'stock' pics.
will tell when i get mine. looks like these 1s you can use as a handsfree...
Hah - I bought these last night.
I've already got a car charger.
A car mount - holder only.
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=130282829189
Handsfree Mic
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=180321523945
3.5mm Audio to Pioneer Aux (CD Stacker control input)
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=320314793352
I figure the mic, the charger and the Pioneer input should all plug into the next device giving me a handsfree kt that comes through my stereo. I'll also be able to play music through it.
3in1 Stereo device. Two mini usb ports and 1 3.5mm audio jack socket.
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=180322159245
If it works I'll then invest some money in a mini usb extension cable just to tidy things up.
Well...
mattyman said:
Hah - I bought these last night.
If it works I'll then invest some money in a mini usb extension cable just to tidy things up.
Click to expand...
Click to collapse
So...did this all work? I really like the idea of using an external mic and then pumping the sound through the stereo.
Still waiting on delivery of the items...
mattyman said:
Still waiting on delivery of the items...
Click to expand...
Click to collapse
Let us know how the FM transmitter work? Usually the sound quality is nasty.
I found this on DX a similar mount for $17.99, just to give you guys an idea how much other people are selling it for.
pandaboyy said:
Let us know how the FM transmitter work? Usually the sound quality is nasty.
I found this on DX a similar mount for $17.99, just to give you guys an idea how much other people are selling it for.
Click to expand...
Click to collapse
still haven't received mine yet, but my wife did say i got a parcel this morning. will update if it is & a brief review.
DX is always good for cheap electric/tronic stuff. they don't have a touch pro version AFAIK, also reading the forums, seems like DX gave another version to a buyer without the speaker. the pictured version looks exactly like the 1 i have for my prophet but mine is the swivel neck version.
anyone know if this will work with s cdma version
HTC Touch Pro car kit has in http://www.expansys.pt/p.aspx?i=170929 ???
if the holder fits, you can use it...
I bought one for my TP... It works ok!!!
I've had mine for a few days now. I have the cradle WITHOUT the FM transmitter, It's a charger/holder only. Fit and finish are a little above what you'd expect for a $15 piece of plastic. To be honest I expected to find casting tabs and rough/sharp edges, and I didn't. Granted that it's cheap plastic, but it works well with me FUZE.
**WARNING** The power supply that comes with it is regulated to 5v. It is NOT passing the full 12v from the car to the cradle. I know that other car kit brands (Seidio especially) put the power regulation inside of the cradle itself and send out a 12v cigarette adapter with their kit. Personally, I had my Seidio kit for my Wizard hardwired into my car. I'm glad I checked voltage prior to connection. I'd imagine the full 12v would fry the USB port/charging circuit in the phone.
Pix to follow next time I go to the car...
i did get the cradle yesterday.
a bit different from the pictured item, it came with a goose neck - but ok. the suction cup initially wasn't holding well, after a few tries & a bit of saliva (ewwww! haha) it worked ok & managed to hold my touch pro. good build to be honest
the fm transmitter worked well. i opened s2p & the sound is good. as good as a clear radio channel. volume is a bit on the low side - even at touch pro max volume. need to turn the radio vol. up quite a bit (remember to turn it down once finished!) the channels go up by 0.1 MHz (if that's correct) so pain if you need to use higher frequencies. I just used 88.5 i think, no radio stations here using that frequency.
Good fit of my touch pro, not as tight as the 1 for my prophet (which was tight enough to cause a bit of chipped paint). i guess it's not for CDMA versions due to the back cover?
the cable that came with it is a bit short if you want to mount it on the windscreen. it is the coil type, but stretches if put on windshield. a worry is that the stretch would make the whole thing fall!
there is no speaker or mic input!! the description says it has a speaker & mic & can be used as a handsfree kit. NO it can't...
1 other annoying thing is that if you use the fm transmitter, u can't charge the pda & vise versa. there is a switch on the side to choose from charging/transmitter. damn annoying if you asked me, wanted this to work with charging & transmitting... u can only do 1 thing at a time. also the short or tight adaptor that came with it...
not too sure on voltage, i guess it is 5V?
all in all, good product/build but annoying that it does not have a speaker/mic input & u can't use the transmitter while charging!
will post pics when i get home. i don't know whether it's worth complaining or not to the seller about the product description not accurate, but for $56 NZD i might just do that...
pbmestre said:
HTC Touch Pro car kit has in http://www.expansys.pt/p.aspx?i=170929 ???
if the holder fits, you can use it...
I bought one for my TP... It works ok!!!
Click to expand...
Click to collapse
yes & no. that is just a holder & adaptor. what i'm talking about is like that with a speaker/fm transmitter so that if e.g. u use GPS, the voice is louder.
*Looks at watch and sighs wistfully while still waiting for parts*
Why don't you open it up to see if you can connect the wires yourself? Shouldn't be too hard to tweak the kit to charge and receive at the same time...
might do that actually. was thinking of it earlier on. i'm sure u can 'cross' the switch so that it can both work together...
I just receive my car kit.
This is what i received ( sorry for the quality of the pictures)
If you link the marked wires together the phone will always be on charge
My biggest problem is that the phone wont fit with the Seidio's Innocase Surface Case on it.
I am planning to atach a microphone also.
how did you get the swivel neck?? i hate my goose neck....
it's the same unit as mine, i guess you bought from the same seller? turbo-express? i emailed the guy saying that it doesn't have a speaker & it came with a goose neck, he replied in broken english like - oops sorry, not like in the picture & no speaker.... hmmmm
used this over the weekend to navigate, i hate the fact that i can't listen to my cd's while i use it. the car kit for my prophet just had a nice, loud speaker which was excellent.
another problem is that for some reason, the transmitter would switch off all of a sudden intermittently.
show us your completed 'hack' ok? will do like you said so it will always be on charge
shame about your case... maybe now use invisible shield or the likes????